LG GR-B207TLQ Owner’s Manual

Introduction

Installation

Operation

Suggestion on food storage

Care and maintenance

Table of contents

	3
Important safety instruction	3
Identification of parts	4
Where to locate	5
Door removal	6
Door replacement	7
Height adjustment	7
Starting	8
Adjusting the temperatures and functions	8
Refreshment center (Applicable to some models only)	11
Ice making (Applicable to some models only)	12
Wine holder (Applicable to some models only)	12
Egg box (Applicable to some models only)	13
Humidity control in the vegetable compartment	13
Convert into a vegetable or meat compartment	13
Deodorizer (Applicable to some models only)	14
Shelf(Applicable to some models only)	14
Location of foods	15
Storing foods	16
How to dismantle parts	17
General information	18
Cleaning	18
	19

2

Introduction

Entry
The model and serial numbers are found on the inner case or back of refrigerator
compartment of this unit. These numbers are unique to this unit and not
available to others. You should record requested information here and retain
this guide as a permanent record of your purchase. Staple your receipt here.
Date of purchase	:
Dealer purchased from	:
Dealer address	:
Dealer phone no.	:
Model no.	:
Serial no.	:

	Important safety instruction
	This refrigerator must be properly installed and located in accordance with the
	installation instructions before it is used.
	Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly
	and pull straight out from the outlet.
	When moving your appliance away from the wall, be careful not to roll over or
	damage the power cord.
	After your refrigerator is in operation, do not touch the cold surfaces in the freezer
	compartment, particularly when hands are damp or wet. Skin may adhere to these
	extremely cold surfaces.
	Unplug the power cord from the power plug for cleaning or other cares. Never touch
	it with wet hands because you can get an electric shock or be hurt.
	Never damage, process, severely bend, pull out, or twist power cord because power
	cord damage may cause a fire or electric shock. You have doubts on whether the
	appliance is properly grounded.
	Never place glass products in the freezer because they may be broken when their
	inner matters are frozen.
	The appliance is not intended for use by young children or infirm persons without
	supervision.
	Young childeren should be supervised to ensure that they do not play with the
	appliance.
Don’t use an	If possible, connect the refrigerator to its own individual electrical outlet to prevent it and
extension cord	other appliances or household lights from causing an overload that could cause a power
	outage.
Accessibility of	The refrigerator-freezer should be so positioned that the supply plug is accessible for
Supply Plug	quick disconnection when accident happens.
Supply Cord	If the supply cord is damaged, it must be replaced by the manufacturer or its service
Replacement	agent or a similarly qualified person in order to avoid a hazard.
Warning	Do not modify or extend the Power Cord length.
	It will cause electric shock or fire.
	3

	Introduction
Child entrapment	DANGER : Risk of child entrapment.
warning	Before you throw away your old refrigerator or freezer :
	Take off the doors
	Leave the shelves in place so that children may not easily climb inside.
	The appliance is not intended for use by young children or infirm persons without
	supervision.
	Young children should be supervised to ensure that they do not play with the appliance.
Don’t store	Don’t store or use gasoline or other flammable vapor and liquids in the vicinity of this or
	any other appliance.
Grounding (Earthing)	In the event of an electric short circuit, grounding (earthing) reduces the risk of electric
	shock by providing an escape wire for the electric current.
	In order to prevent possible electric shock, this appliance must be grounded
	improper use of the grounding plug can result in an electric shock. Consult a qualified
	electrician or service person if the grounding instructions are not completely
	understood, or if you have doubts on whether the appliance is properly grounded.
	Identification of parts

Ice separation handle (Optional)

Ice making compartment (Optional)

Door rack

Ice box (Optional)

Lamp

Shelf (steel or glass)

Shelf

Door rack

Drawer

Freezer Refrigerator compartment compartment

Milk product corner Lamp

Shelf

Wine holder (Plastic or wire)

Door rack(1 piece or 2 piece)

Shelf

Snack drawer (Optional)

Refreshment center (Optional)

Egg box

Door rack(1 piece or 2 piece)

Shelf (Folding or Normal)

Door rack

Vegetable drawer (1 or 2)

Door rack	Humidity switch

Lower cover

NOTE

•If you find some parts missing from your unit, they may be parts only used in other models.

4

Installation

Where to locate

Select a good 1. Place your appliance where it is easy to use. location 2. Avoid placing the unit near heat sources,

direct sunlight or moisture.

3. To ensure proper air circulation around the fridge -freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches

(5 cm) from the rear wall.

4.To avoid vibrations, the appliance must be leveled.

5. Don't install the appliance below 5°C. It may cause affect the performance.

Disposal of the	This appliance contains fluid (refrigerant, lubricant)and is made of parts and materials
old appliance	which are reusable and/or recyclable.
	All the important materials should be sent to the collection center of waste material
	and can be reused after rework (recycling). For take back, please contact with the
	local agency.

5

Installation

	Door removal
Warning	Electric Shock Hazard
	Disconnect electrical supply to refrigerator before installing.
	Failure to do so could result in death or serious
	injury.
	If your access door is too narrow for the
	refrigerator remove the refrigerator door and	Lower
	pass the refrigerator laterally.	cover
Remove lower	Remove the lower cover by lifting upward.	Hinge
cover
		cover
Remove the	1) Loosen the hinge cover screws and remove
freezer	the cover.
compartment	Upper hinge
door		Upper
	Keeper	hinge

2) Remove the keeper by rotating it to counter clockwise ( ) and then lifting the upper hinge up ( ).

NOTE

•When removing the upper hinge, be careful that the door does not fall forwards.

3)Remove the freezer compartment door by

	lifting it upward.
			Lower hinge
Remove the	1) Loosen the hinge cover screws and remove
refrigerator	the cover. Removeconnection wire if any,
door	except for the earth line.
		Connection
		wires
	2) Remove keeper by rotating it clockwise ( )	Upper hinge	Keeper
	and then remove upper hinge by lifting it up
	( ).

	3) Remove refrigerator compartment door by
	lifting up.
Pass the	Pass the refrigerator laterally through access
refrigerator	door as shown in the right figure.
	6

Installation

Door replacement

Mount them in the reverse sequence of removal after they pass through the access door.

Height adjustment

If the freezer

Level the door by inserting flat ( - type) driver into the groove of the left height adjusting

compartment door

screw and rotate it to the arrow direction (

).

is lower than the

refrigerator

compartment door

If the freezer

Level the door by inserting flat ( - type) driver into the groove of the right height

compartment door

adjusting screw and rotate it to the arrow direction (

).

is higher than the

refrigerator

compartment door

After leveling the	The refrigerator doors will close smoothly by heightening the front side by adjusting
door height	the height adjusting screw. If the doors do not close correctly, performance may be
	affected.

Next 1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.

2.Install accessories such as the wine corner, cover evaporating tray, etc., in their proper places. They are packed together to prevent possible damage during shipping.

3.Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet.

4.Prior to use, let the appliance run for 2-3 hours. Check the flow of cold air in the freezer compartment to ensure proper cooling has taken place. Your appliance is now ready for use.

7