LG GP-5D906BSL Owner’s Manual
OWNER’S MANUAL
BOTTOM FREEZER
FRIDGE
Please read this owner's manual thoroughly before
operating and keep it handy for reference at all times.
GP-5D906BSL
www.lg.com
2
TABLE OF CONTENTS
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 IMPORTANT SAFETY
INSTRUCTIONS
7 COMPONENTS
7 Fridge Exterior
8 Fridge Interior
9 INSTALLATION
9 Installation Overview
10 Unpacking Your Fridge
10 Choosing the Proper Location
10 - Flooring
11 - Ambient Temperature
11 How to Remove the Fridge Door
16 How to Remove the Freezer Door
16 Height Adjustment
16 - Fridge Door Height Adjustment
17 - If the heights of the Freezer doors are
different
18 Connecting the Water Line
18 - Before You Begin
18 - Water Pressure
18 Turning On the Power
19 HOW TO USE
19 Before Use
20 Control Panel
20 - Control Panel Features
28 In-Door Ice Bin
28 - Removing the In-Door Ice Bin
28 - Refitting the In-Door Ice Bin
29 Automatic Icemaker
31 Ice and Water Dispenser
32 Storing Food
32 - Food Preservation Location
34 - Food Storage Tips
34 - Storing Frozen Food
35 Adjusting the Fridge Shelves
35 - Removing the Shelf
35 - Refitting the Shelf
36 - Using the Folding Shelf
36 - When Closing the Door
37 Big Fresh Zone
37 - Removal of the Big Fresh Zone drawer
37 - Refitting the Big Fresh Zone drawer
38 How to remove and refit the vegetable
box
39 Extra Space (Multi collection corner)
39 Fridge Basket
39 Dairy Corner
39 Door-In-Door
40 - Door-In-Door Shelf Disassembly
41 Adjustable Moving Basket
41 Freezer Drawer
41 - Freezer Drawer Removal
42 - Refitting the Freezer Drawer
42 Freezer/Fridge Basket
43 MAINTENANCE
43 Cleaning
44 Replacing the Pure N Fresh filter
45 Replacing the Water Filter
46 SMART DIAGNOSIS
46 Using Smart Diagnosis
47 TROUBLESHOOTING
3
PRODUCT FEATURES
PRODUCT FEATURES
* Depending on the model, some of the following functions may not be available.
DOOR ALARM
The Door Alarm function is designed to prevent fridge malfunctioning that
could occur if a fridge door or freezer door remains open. If a fridge door or
freezer door is left open for more than 60 seconds, a warning alarm sounds
in 30 second intervals until it is closed.
EXPRESS FREEZE
The freezer section is maintained at the coldest temperature for a 24-hour
period before automatically resuming normal operation. The freezer display
temperature will not change when Express Freeze is engaged. It will also
enhance ice production whilst it is on.
AUTO CLOSING HINGE
The fridge doors close automatically with a slight push. (The door only
closes automatically when it is open at an angle less than 30°.)
FILTERED WATER AND ICE DISPENSER
The water dispenser dispenses plumbed, chilled water.
The ice dispenser can dispense cubed or crushed ice.
4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
This guide contains many important safety messages. Always
read and obey
all safety messages.
WARNING
Death or Serious injury can occur if you do not follow instructions.
CAUTION
Indicates an imminently hazardous situation which, if not avoided, may result
in minor or moderate injury, or product damage.
WARNING
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety
precautions should be followed, including the following.
Power
NEVER unplug your fridge by pulling on the power cord. Always grip the plug firmly and pull it straight
y
out from the outlet.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
y
similarly qualified person in order to avoid a hazard. Do not use a cord that shows cracks or abrasion
damage along its length or at either the plug or connector end.
Do not use an uncertified power outlet.
y
Unplug the power plug immediately in the event of a blackout or thunderstorm.
y
Plug in the power plug with the power cord facing downward.
y
Installation
Contact an authorized service center when you install or relocate the fridge.
y
When moving your fridge away from the wall, be careful not to roll over or damage the power cord.
y
Connect this product to a dedicated grounded electric outlet conforming with the rating prior to use. It
y
is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.
Do not install the fridge where there may be a danger of it falling. Installation on a non sturdy timber
y
floor may cause difficulty in door alignment and cause the cabinet to deform.
Connect to potable water supply only.
y
Use
DO NOT allow children to climb, stand, or hang on the fridge doors or shelves in the fridge. They could
y
damage the fridge and seriously injure themselves.
Where fitted, do not place heavy objects on the dispenser of the fridge or hang onto it.
y
Do not place heavy or dangerous objects (bottles or vases with liquid) on the fridge.
y
Do not put live animals inside of the fridge.
y
Do not allow children to climb into the product when it is in or out of use.
y
In the event of a gas leak (propane/LPG), ventilate sufficiently and contact an authorized service center
y
before use. Do not touch or disassemble the electric outlet of the fridge.
In the event of a refrigerant leak, move flammable objects away from the fridge. Ventilate sufficiently
y
and contact an authorized service center.
Do not use or place flammable substances (chemicals, medicine, cosmetics, etc) near the fridge or
y
store them inside the fridge. Do not place the fridge in the vicinity of flammable gas.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards
that can cause death or serious injury to you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard signal word
WARNING or CAUTION. These words mean:
5
IMPORTANT SAFETY INSTRUCTIONS
This appliance is intended to be used in household and similar applications such as
y
- staff kitchen areas, offices and other working environments;
- and by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
- catering and similar non-retail applications. it is not intended for commercial applications.
Do not use this product for special purposes or mobile applications (storage of medicine or test materials
y
or on ships, etc).
Unplug the power plug before cleaning or repairing the fridge.
y
If the fridge is fitted with light bulbs and require replacing, unplug the fridge or turn off the power before
y
doing so.
Do not modify or extend the power cord.
y
Do not use a hair dryer to dry the interior. Do not light a candle to remove any interior odor.
y
For your safety, this appliance must be properly grounded. Have the wall outlet and the circuit checked
y
by a qualified electrician to make sure the outlet is properly grounded.
Do not use an outlet that can be turned off via a remote switch. Do not use an extension cord. It is the
y
user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
y
Do not use an adapter plug and plug the power plug into a multi-outlet extension cord.
y
Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect smoke.
y
Turn the power off if dust or water from above or below penetrates into the fridge. Call a service agent.
y
Do not disassemble or modify the fridge.
y
Do not put hands, feet, or metal objects below or behind the fridge.
y
Do not operate the fridge or touch the power cord with wet hands.
y
In fridges with automatic icemakers, avoid contact with the moving parts of the ejector mechanism or
y
with the heating element that releases the cubes. Do not place fingers or hands on the automatic icemaking mechanism while the fridge is plugged in.
When dispensing ice from the dispenser, do not use crystal ceramics.
y
Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when your fridge is
y
in operation.
Do not put glass containers, glass bottles or beverage cans in the freezer.
y
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
y
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
y
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
Do not refreeze frozen foods that have thawed completely. It may result in serious health issues.
y
If you are throwing away your old fridge, make sure the CFC coolant is removed for proper disposal by
y
a qualified servicer. If you release CFC coolant, you may be fined or imprisoned in accordance with the
relevant environmental law.
Disposed or abandoned fridges are dangerous, even if they are sitting for only a few days. When
y
disposing the fridge, remove the packing materials from the door or take off the doors but leave the
shelves in place so that children may not easily climb inside.
If the refrigerant gas has leaked, do not touch the fridge or the power outlet and ventilate the room
y
immediately. A spark could trigger an explosion causing a fire or burns. Because this fridge uses
natural gas (isobutene, R600a) as the environment-friendly refrigerant, even a small amount (50~90g) is
combustible. If gas leaks from severe damage during delivering, installing or using the fridge, any spark
may cause fire or burns.
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety
precautions should be followed, including the following.
6
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Installation
The fridge must be properly installed in accordance with the Installer Instructions that were taped to the
y
front of the fridge.
Be careful when you unpack and install the fridge. Immediately dispose of packing materials (plastic) out
y
of reach of children. The appliance must be positioned for easy access to a power source. Do not store
or install the fridge outdoors or anywhere that is directly or indirectly exposed to weathering conditions,
or indoor in direct sunlight.
During use
Close the doors carefully when children are around.
y
Keep fingers out of pinch point areas; clearances between the doors and cabinets are necessarily small.
y
Be careful closing doors when children are in the area.
If food is stacked or stored poorly on the shelves, it may fall and cause injury when the door is opened.
y
Do not move fridge while the fridge is operating. A Compressor rattling noise may occur as a result and
y
will only stop when the compressor cycles off, or when the power to the unit is turned off and back on
again. (This is normal and will not impact on the performance or the life of the compressor. The rattling
will stop after the compressor comes to a rest.)
Maintenance
Do not use strong detergents like wax or thinners for cleaning. Clean with a soft fabric.
y
Wipe foreign objects (dust, water, etc) off the prongs of the power plug and contact areas before
y
connecting.
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety
precautions should be followed, including the following.
SAVE THESE INSTRUCTIONS
This appliance contains a small amount of isobutane refrigerant (R600a), natural gas with high
environmental compatibility, but it is also combustible. When transporting and installing the appliance,
care should be taken to ensure that no parts of the refrigerating circuit are damaged. Refrigerant
squirting out of the pipes could ignite or cause an eye injury. If a leak is detected, avoid any naked
flames or potential sources of ignition and air the room in which the appliance is standing for several
minutes.
In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating circuit occurs,
the size of the room in which the appliance may be sited depends on the amount of refrigerant used.
The room must be 1m
2
in size for every 8g of R600a refrigerant inside the appliance. The amount of
refrigerant in your particular appliance is shown on the identification plate inside the appliance. Never
start up an appliance showing any signs of damage. If in doubt, consult your dealer.
WARNING
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
y
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
y
recommended by the manufacturer.
Do not damage the refrigerant circuit.
y
Do not use electrical appliances inside the food storage compartments of the appliance, unless they
y
are of the type recommended by the manufacturer.
The refrigerant and insulation blowing gas used in the appliance require special disposal procedures.
y
When disposal, please consult with service agent or a similarly qualified person.
WARNING
Use drinkable water for ice making.
y
7
COMPONENTS
COMPONENTS
Use this page to become more familiar with the parts and features of your fridge.
Page references are included for your convenience.
*The appearance and specifications of the actual product may differ depending on the model.
Fridge Exterior (Applicable to some models only)
LED Display
Displays the fridge and freezer’s
target temperature, the water
filter condition and the dispenser
status.
Door in Door release
Button
Fridge
Freezer
Filtered Water and
Ice Dispenser
Dispenses purified water and ice.
8
COMPONENTS
Fridge Interior (Applicable to some models only)
LED interior lamps
The interior lamps light up
the inside of the fridge.
Shelf
Dairy Product Bin
Used to preserve dairy
products.
Fridge Basket
Shelf
Freezer Basket
Pure N Fresh Filter
Door-In-Door
Folding Shelf
Big Fresh Zone
Freezer Basket
Extra Space
DrawerDrawer
Indoor Ice Bin
Ice cubes are
automatically produced.
Water Filter
9
INSTALLATION
INSTALLATION
Installation Overview
Please read the following installation instructions first after purchasing this product or transporting
it to another location.
1 Unpacking your
fridge
3 Connecting the
water supply and
water line
2 Choosing the proper
location
4 Leveling and Door
Alignment
10
INSTALLATION
Choosing the Proper Location
Select a place where a water supply can be
y
easily connected for the automatic icemaker.
The fridge should always be plugged into its
y
own individual properly grounded electrical
outlet rated for 230~240 Volts, 50 Hz, AC only,
and fused at 15 or 20 amperes. This provides
the best performance and also prevents
overloading house wiring circuits which could
cause a fire hazard from overheated wires. It is
recommended that a separate circuit serving
only this appliance be provided.
Unpacking Your Fridge
WARNING
Use two or more people to move and install
y
the fridge. Failure to do so can result in back
or other injury.
Your fridge is heavy. When moving the fridge
y
for cleaning or service, be sure to protect
the floor. Always pull the fridge straight
out when moving it. Do not wiggle or walk
the fridge when trying to move it, as floor
damage could occur. Wind the leveling feet
up first so that the unit is on its rollers.
Keep flammable materials and vapors, such
y
as gasoline, away from the fridge. Failure to
do so can result in fire, explosion, or death.
Remove tape and any temporary labels from your
fridge before using. Do not remove any warningtype labels, the model and serial number label, or
the Tech Sheet that is located under the front of
the fridge.
To remove any remaining tape or glue, rub the
area briskly with your thumb. Tape or glue residue
can also be easily removed by rubbing a small
amount of liquid dish soap over the adhesive with
your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your fridge.
Fridge shelves are installed in the shipping
position. Please reinstall shelves according to
your individual storage needs.
Flooring
To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed floor.
If required, adjust the leveling legs to compensate
for unevenness of the floor. The front should be
slightly higher than the rear to aid in door closing.
Leveling legs can be turned easily by tipping the
cabinet slightly. Turn the leveling legs to the left
to raise the unit or to the right to lower it. Poorly
constructed timber flooring can cause a limit in
door adjustment and the cabinet to become out
of shape. (See Leveling and door AlIgnment.)
NOTE
Installing on carpeting, soft tile surfaces,
a platform or weakly supported structure
is not recommended.
NOTE
The water pressure must be 20 – 120 psi
or 138 – 827 kPa or 1.4 – 8.4 kgf/cm².
If the fridge is installed in an area with low
water pressure (below 20 psi), you can
install a booster pump to compensate for
the low pressure.
WARNING
To reduce the risk of electric shock, do not
install the fridge in a wet or damp area.
do not install in any outdoor or sheltered
outdoor location or direct sunlight.
11
INSTALLATION
Ambient Temperature
Install this appliance in an indoor area where
the temperature is between 13°C and 43°C.
If the temperature around the appliance is
too low or high, the cooling ability may be
adversely affected.
1
Place your appliance where it is easy to
use.
2
Avoid placing the unit near heat sources,
direct sunlight or moisture.
3
To ensure proper air circulation around the
fridge -freezer, please maintain sufficient
space on both the sides as well as top and
maintain at least 5 cm from the rear wall.
4
To avoid vibrations, the appliance must be
leveled.
5
Don’t install the appliance below 5°C.
It may affect the performance.
5 cm
60 cm
Removing the Left Fridge Door
How to Remove the Fridge Door
1
The water supply is connected to the
upper right part of the rear surface of the
fridge. Remove the Collet locking clip.
then firmly push down on the outer Collet
and then pull the supply hose up whilst
keeping the Collet pushed down to detach
the water supply line as shown in
.
NOTE
Detachment of the water supply line is
applicable only when removing the left
fridge door.
Collet
2
Remove the screw from the hinge
cover at the top of the fridge. Lift the hook
(not visible), located at the bottom of the
front side of the cover
with a flat-head
screwdriver.
12
INSTALLATION
3
Remove the cover and pull out the tube .
Disconnect all wire harnesses
.
4
Rotate the hinge lever counterclockwise
. Lift the top hinge free of the hinge
lever latch.
CAUTION
When lifting the hinge free of the latch, be
careful that the door does not fall forward.
Hinge Lever Latch
5
Lift the door from the middle hinge pin and
remove the door.
CAUTION
Place the door, inside facing up, on a
non-scratching surface.
Removing the Right Fridge Door
1
Remove the top hinge cover screw .
Lift the hook (not visible), located at the
bottom of the front side of the cover
,
with a flat-head screwdriver.
2
Detach the wire harness .
13
INSTALLATION
CAUTION
When lifting the hinge free of the hinge
lever latch, be careful that the door
does not fall forward.
Hinge Lever Latch
3
Rotate the hinge lever clockwise.
Lift the top hinge
free of the hinge
lever latch.
4
Lift the door from the middle hinge pin and
remove the door.
CAUTION
Place the door, inside facing up, on a
non-scratching surface.
NOTE
1) Gently insert the tube until only one
line shows on the tube.
(Correct)
(Incorrect)
2) Pull the tube to make sure that the
tube is tightly fastened.
Collet
Tube
Insert Line
14
INSTALLATION
Install the right-side door first.
1
Make sure that the plastic sleeve is
inserted in the bottom of the door. Lower
the door onto the middle hinge pin as
shown in the figure.
2
Fit the hinge over the hinge lever latch
and slot it into place. Rotate the lever
counterclockwise to secure the hinge.
Refitting the Right Fridge Door
Hinge Lever Latch
4
Make sure that the door-switch located
inside the cover is tightly connected.
Position the cover in its place. Insert and
tighten the cover screw
.
3
Connect the wire harness .
15
INSTALLATION
Install the left fridge door after the right door is
installed.
1
Make sure that the plastic sleeve is
inserted in the bottom of the door. Install
the fridge door onto the middle hinge.
2
Fit the hinge over the hinge lever latch
and slot it into place. Rotate the lever
clockwise
and fasten the hinge.
Refitting the Left Fridge Door
3
Connect all the wire harnesses.
Hinge Lever Latch
4
Push the water supply tube into the hole
on the top case and pull it through the
backplate.
5
Hold the water supply connection and
gently push in the collet to connect the
water supply line as shown in
. Insert
the tube at least
5
/8 inch (15 mm) into the
connector.
6
Make sure that the door-switch located
inside the cover is tightly connected. Place
the cover
in its position and tighten the
cover screw .
Collet
16
INSTALLATION
Height Adjustment
Leveling the doors may not be possible when
the floor is not leveled, or is of weak or poor
construction. The fridge is heavy and should
be installed on a rigid and solid surface. Some
Timber flooring may cause levelling difficulties
if it flexes excesively.
Fridge Door Height Adjustment
If the left side door is lower, lift the left
y
side door, and turn the hinge bolt using the
spanner as in the drawing. (for upper fridge
doors, use spanner
1
.)
If the right side door is lower, lift the right
y
side door, and use a pair of long nose pliers
(not supplied) to additionally insert
3
a
snap ring until the heights are balanced as
in the drawing.
3
Remove the door by raising it from the
lower hinge.
How to Remove the Freezer
Door (TURN OFF THE MAIN
POWER. Same procedure for
left and right doors)
1
Remove the inner hinge bolt.
2
Twist the hinge to raise the pivoting end
so that the door can be lifted off.
Lower hinge
Refrigeration
left hand door
Height difference
Refrigeration
right hand door
17
INSTALLATION
If the heights of the Freezer doors
are different
Method 1 is recommended.
y
For freezer doors, use spanner
y
2
.
1
(Method 1)
Open the door, and adjust the height by
screwing the nut above the foot with the
2
spanner.
2
(
Method 2, only allows a maximum of 3mm
of adjustment)
(1) Use the wider side of the number
2
spanner to turn locking nut (
)
clockwise to unscrew the locking nut.
(2) Use the narrower side of the spanner to
turn the adjustment hinge pin (
)
clockwise or ( ) counterclockwise,
and adjust the gap difference between the
fridge and the freezer door.
(3) After the door heights are adjusted,
completely tighten the locking nut (
)
counterclockwise.
CAUTION
Do not adjust the hinge pin height level
too much. The hinge pin can fall out.
(Range of height adjustment : Max. 3mm)
Height difference
Locking nut
Adjustment
hinge pin
Lower door
Lift door
Unscrew nut
Tighten nut
Spanner
Lower door
Lift doorLift door
18
INSTALLATION
Connecting the Water Line
Before You Begin
This water line installation is not covered by
the fridge warranty. Follow these instructions
carefully to minimize the risk of expensive water
damage.
Water hammer (water banging in the pipes) in
house plumbing can cause damage to fridge
parts and can lead to water leakage or flooding.
Call a qualified plumber to correct water hammer
before installing the water supply line to the
fridge.
If you use your fridge before connecting the
water line, make sure the icemaker power
switch is in the OFF (O) position.
Water Pressure
A cold water supply. The water pressure must
be between 20 and 120 psi (140 and 827kPa) on
models without a water filter and between 40 and
120 psi (250 and 827 kPa) on models with a water
filter.
If a reverse osmosis water filtration system is
connected to your cold water supply, this water
line installation is not covered by the fridge
warranty. Follow the following instructions
carefully to minimize the risk of expensive water
damage.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to
be a minimum of 40 and 60 psi (280 and 420 kPa),
less than 2.0~3.0 sec. to fill a cup of 7 oz (200 cc)
capacity.
CAUTION
Do not install the icemaker tubing in
areas where temperatures fall below
freezing.
CAUTION
To prevent burns and product damange,
only connect the fridge water line to a
cold water supply.
Turning On The Power
Plug in the fridge.
CAUTION
Connect to a rated power outlet.
y
Have a certified electrician check
y
the wall outlet and wiring for proper
grounding.
Do not damage or cut off the ground
y
terminal of the power plug.
19
HOW TO USE
HOW TO USE
Before use
Clean the fridge.
Clean your fridge thoroughly and wipe off all dust that may have accumulated
during shipping.
NOTE
Remove adhesive residue by wiping it off with your thumb or dishwashing detergent.
CAUTION
Do not scratch the fridge with a sharp object or use a detergent that
y
contains alcohol, a flammable liquid or an abrasive when removing any tape
or adhesive from the fridge,.
Do not peel off the model or serial number label or the technical information
y
on the rear surface of the fridge.
Connect the power supply.
Check if the power supply is connected before use.
Read the “Turning On The Power” section. (Your plug type might be different from
the picture.)
CAUTION
Putting food in the fridge before it has cooled could cause the food to
spoil, or a bad odor could remain inside the fridge.
Wait for the fridge to cool.
Allow your fridge to run for at least three to four hours before putting food in it.
Check the flow of cold air in the freezer compartment to ensure proper cooling.
The fridge makes a loud noise after initial operation.
This is normal. The loudness will decrease as the temperature lowers.
Before Plugging in, open the fridge doors to ventilate the interior.
The inside of the fridge may smell like plastic at first. Remove any adhesive tape
from inside the fridge and open the fridge doors for ventilation until any odors have
subsided.
CAUTION
Running the automatic icemaker before connecting it to the water supply
may cause the fridge to malfunction.
Turn off the icemaker if the fridge is not yet connected to the
water supply.
Turn off the automatic icemaker and then plug the power plug of the fridge into the
grounded electric outlet.
* This is applicable only to certain models.
20
HOW TO USE
Control Panel (Applicable to some models only)
Control Panel Features
For easy viewing of the display, the background
lamp is lit in the following cases.
When you turn on the power
y
When you press a button or touch the LCD
y
display window
When you open any of the refrigerator’s doors
y
While the panel background lamp is OFF, if you
press any button, the panel background lamp will
illuminate but the status of the settings will not
change until a button is pressed again or the LCD
display window is touched again.
For power saving, the display window lamp is
automatically turned OFF in the following cases.
1 minute after power ON
y
20 seconds after opening and closing any of
y
the refrigerator’s doors
If there is no further button activity for 20
y
seconds after pressing a button.
Panel background lamp
When power saving is in operation, display
window is turned OFF except the ice maker
(ON/OFF)
For LCD display window, when you wipe
the display window with a dry cloth, etc. for
cleaning, due to the characteristics of LCD
inside the display window, black lines may show
temporarily. It will disappear shortly, and it is not a
disorder.
LED Display (Touch Button)
LCD Display
Loading...