REFRIGERATOR-
FREEZER
OWNER'S MANUAL
PLEASE
READ THIS OWNER'S MANUAL TH
BEFORE OPERATING AND KEEP I
FOR REFERENCE AT ALL TIMES.
P/No. MFL56987001
CONTENTS
IMPORTANT WARNINGS ....................... |
. .. 3 |
INSTALLATION ............................................ |
4 |
FEATURE CHART ........................................ |
5 |
OPERATION .............................................. |
6~8 |
Starting
Temperature Control
Ice Making
Chilled Compartment
Defrosting
Deodorizer (Optional)
Vitamin Kit (Optional)
SUGGESTIONS ON FOOD STORAGE |
...... 9 |
CLEANING ................................................... |
10 |
GENERAL INFORMATION ...................... |
11 |
LAMP REPLACEMENT ............................. |
12 |
BEFORE CALLING FOR SERVICE ......... |
12 |
2
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE AND RELIABILITY.
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
IMPORTANT WARNINGS
DO NOT USE AN EXTENSION CORD |
ABOUT GROUNDING (EARTHING) |
Use this appliance on a |
Indedicatthe eventdcircuit;of an thatelectriis |
an outlet that is the only(earthing)outlet onreducesthe circuitthe ris. Overloading a circuit causesprovidinglow voltage,an escape wire f
malfunction, possible damage to the equipment,
In order to prevent possib
and poor cooling capacity.
appliance must be grounded
Check your local electric code or consult a Improper use of the ground
qualified electrician if you have questions.
an electric shock. Consult
ACCESSIBILITY SUPPLY PLUG
service person if the grou completely understood, or
whether the appliance is p The refrigerator-freezer should be so positioned
that the supply plug is accessible for quick
DO NOT MODIFY OR EXTEND THE
disconnection if an accident happens.
|
POWER CORD LENGTH |
SUPPLY CORD REPLACEMENT |
It will cause electric |
|
shock or fire. |
If the supply cord is damaged, it must be replaced |
by the manufacturer or replacement or a similarly qualified person in order to avoid a hazard.
This appliance must be grounded (earthed).
DON'T WAIT! DO IT NOW!
Do not store inflammable materials, explosives, or chemicals in the refrigerator.
VERY DANGEROUS ATTRACTION
An empty refrigerator can attraction to children. R latches, lids or the enti appliance,or take some ot harmless.
WARNING
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
DISPOSAL OF THE OLD APPLIANCE
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling). For take back, please contact with the local agency.
3
DISPOSAL OF YOUR OLD APPLIANCE
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4.For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you purchased the product.
5. Flammable insulation blowing gases should be disposed appropriately. Take the cabinet and doors to a recovery plant for flammable insulation blowing gases.
• Information of fluorinated greenhouse gases
used as refrigerant of this refrigerator.
INSTALLATION
SELECT A GOOD LOCATION
1.Place your refrigerator where it is easy to use.
2.Avoid placing the refrigerator near heat source, direct sunlight or moisture.
3.To ensure proper air circulation around the fridge-freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall.
10 inches or more
2 inch or more
4. To avoid vibrations, the refrigerator must be level. If necessary, adjust the leveling screw(s) to compensate for unevenness of the floor. To close the doors easily, the front should be slightly higher than the rear. Leveling screw(s) can be turned easily by tipping the cabinet slightly. Turn the leveling screw(s) clockwise to raise the refrigerator, counterclockwise to lower it.
NEXT
1.Wipe off all dust accumulated during shipping and clean your refrigerator thoroughly.
2.Install accessories such as ice cube box, etc., in their proper places. They are packed together to prevent possible damage during shipment.
3.Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet.
4.Prior to use, let the refrigerator run for 2-3 hours. Check the flow of cold air in the freezer compartment to ensure proper cooling has taken place.Your refrigerator is now ready for use.
4