LG GN-U292RLCK, GN-U262RVCK, GN-U262RLCK User Manual

BEFORE CALLING FOR SERVICE

SERVICE CALLS CAN OFTEN BE AVOIDED! IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING PROPERLY, CHECK THESE POSSIBLE CAUSES FIRST :

PROBLEM

REFRIGERATOR DOES NOT OPERATE

REFRIGERATOR OR FREEZER Temperature control not set on proper position. COMPARTMENT TEMPERATURE TOO WARM

ABNORMAL NOISE(S)

REFRIGERATOR HAS ODOR

DEW FORMS ON THE CABINET SURFACE

POSSIBLE CAUSES

Has a house fuse blown or circuit breaker tripped? Has the power cord plug been removed or loosened from the electrical wall outlet?

Appliance is placed close to wall or heat source. Warm weather-frequent door openings. Door left open for a long time. Large amount of foods are kept in the refrigerator.

Refrigerator is installed in a weak or uneven place, or leveling screw needs adjusting. Unnecessary objects placed behind the refrigerator.

Foods with strong odors should be tightly covered or wrapped. Interior needs cleaning.

Not unusual during periods of high humidity. Door may have been left ajar.

REFRIGERATORFREEZER

OWNER'S MANUAL

PLEASE READ THIS OWNER'S MANUAL THOROUGHLY BEFORE OPERATING AND KEEP IT HANDY FOR REFERENCE AT ALL TIMES.

P/NO : 3828JP8011H

LAMP REPLACEMENT

CONTENTS

INSTALLATION ............................................ 3

FEATURE CHART ........................................ 4

OPERATION .............................................. 5~7

Starting

Temperature Control

Ice Making

Chilled Compartment

Defrosting

Deodorizer (Optional)

SUGGESTIONS ON FOOD STORAGE ...... 8

CLEANING ................................................... 9

GENERAL INFORMATION .......................10

LAMP REPLACEMENT ............................. 11

IMPORTANT WARNINGS ......................... 11

BEFORE CALLING FOR SERVICE ......... 12

1. Unplug the power cord from the outlet.

2. Remove refrigerator shelves.

3. To remove the lamp cover, insert a slotted driver at the one of under hole of the lamp cover and pull it out forwards.

4. Turn the lamp counterclockwise.

5. Assemble in reverse order of disassembly. Replacement bulb must be the same specification as original.

IMPORTANT WARNINGS

DO NOT USE AN EXTENSION CORD

Use this appliance on a dedicated circuit; that is, an outlet that is the only outlet on the circuit. Overloading a circuit causes low voltage, malfunction, possible damage to the equipment, and poor cooling capacity. Check your local electric code or consult a qualified electrician if you have questions.

ACCESSIBILITY SUPPLY PLUG

The refrigerator-freezer should be so positioned that the supply plug is accessible for quick disconnection if an accident happens.

SUPPLY CORD REPLACEMENT

If the supply cord is damaged, it must be replaced by the manufacturer or replacement or a similarly qualified person in order to avoid a hazard.

VERY DANGEROUS ATTRACTION

An empty refrigerator can be a dangerous attraction to children. Remove either gaskets, latches, lids or the entire door from your unused appliance,or take some other action to make it harmless.

ABOUT GROUNDING (EARTHING)

In the event of an electric short circuit, grounding (earthing) reduces the risk of electric shock by providing an escape wire for the electric current.

In order to prevent possible electric shock, this appliance must be grounded.

Improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if you have doubts on whether the appliance is properly grounded.

This appliance must be grounded (earthed).

DON'T WAIT! DO IT NOW!

Do not store inflammable materials, explosives,

The appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

or chemicals in the refrigerator.

DISPOSAL OF THE OLD APPLIANCE

This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable. All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling). For take back, please contact with the local agency .

+ 4 hidden pages