LG GN-U192SLK Owner’s Manual [ar]
REFRIGERATORFREEZER
o 24J
o 24J
. 3
INSTALLATION ............................................... 4
6-8
10
11
12
12
5
9
2
DO NOT MODIFY OR EXTEND THE
POWER CORD LENGTH
It will cause electric
shock or fire.
DO NOT USE AN EXTENSION CORD
If possible, connect the refrigerator to its own
individual electrical outlet to prevent it and other
appliances or household lights from causing an
overload that could cause a power outage.
ACCESSIBILITY OF SUPPLY PLUG
The refrigerator-freezer should be so positioned
that the supply plug is accessible for quick
disconnection when accident happens.
grounded.
ABOUT GROUNDING(EARTHING)
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by
providing an escape wire for the electric current.
In order to prevent possible electric shock, this
appliance must be grounded.
Improper use of the grounding plug can result in
an electric shock. Consult a qualified electrician
or service person if the grounding instructions
are not completely understood, or if you have
doubts on whether the appliance is properly
SUPPLY CORD REPLACEMENT
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
VERY DANGEROUS ATTRACTION
An empty refrigerator can be a dangerous
attraction to children. Remove gaskets, latches, lids
or the entire door from your unused appliance,or
take some other action to make it harmless.
Disposal of the old appliance
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are
reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material and can be
reused after rework (recycling). For take back, please contact with the local agency.
This appliance must be grounded (earthed).
DON'T WAIT! DO IT NOW!
NEVER STORE EXPLOSIVES AND CHEMICALS
3
SELECT A GOOD LOCATION
1. Place your refrigerator where it is easy to use.
2. Avoid placing the refrigerator near heat
sources, direct sunlight or moisture.
3.
To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space
on both the sides as well as top and maintain
at least 2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the refrigerator must
be level.
If necessary, adjust the leveling screw(s) to
compensate for unevenness of the floor.
To close the doors easily, the front should be
slightly higher than the rear.
Leveling screw(s) can be turned easily by
tipping the cabinet slightly.
Turn the leveling screw(s) clockwise to raise
the refrigerator, counterclockwise to lower it.
NEXT
1. Wipe off all dust accumulated during shipping
and clean your refrigerator thoroughly.
2. Install accessories such as the ice cube box,
evaporating tray cover
places. They are packed together to prevent
possible damage during shipping.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
4. Prior to use, let the refrigerator run for 2-3
hours.
Check the flow of cold air in the freezer
compartment to ensure proper cooling has
taken place.
Your refrigerator is now ready for use.
, etc., in their proper
ﺔﺟﻼﺜﻟا لﻮﺣ ﺢﻴﺤﺻ ﻞﻜﺸﺑ ءاﻮﻬﻟا ﺮﻳوﺪﺗ نﺎﻤﻀﻟ ﺰﻳﺮﻔﻟاو
ا ﻦﻡ ﺔﺟﻼﺜﻟاو ﻂﺋﺎﺤﻟا ﻦﻴﺑ ﺔﻴﻓﺎآ ﺔﻓﺎﺴﻤﺑ ظﺎﻔﺘﺣﻻا ﻲﺟﺮﻳ ،
ﺔﻓﺎﺴﻤﺑ ظﺎﻔﺘﺣﻻاو ،ﻰﻠﻋﻷا ﻦﻡو ﻦﻴﺒﻧﺎﺠﻟ ﺔﺻﻮﺑ
.
)ﻢﺱ (ﻲﻔﻠﺨﻟا ﻂﺋﺎﺤﻟاو ﺔﺟﻼﺜﻟا ﻦﻴﺑ ﻞﻗﻷا ﻰﻠﻋ
4
Loading...