Page 1
BEFORE CALLING
BEFORE CALLING
FOR SERVICE
FOR SERVICE
LG
P/NO 3828JP8003F
Page 2
LAMP REPLACEMENT
1. Unplug the power cord from the outlet
2. Open the cover lamp
3. Turn the lamp counterclockwise
4 . Assemble in reverse order of disassembly. Replacement bulb must be the
same specification as original.
LAMP REPLACEMENT
The outside wall of refrigerator cabinet may some times get warm, especially
just after installation. This is not a trouble of refrigerator, but because of the anti
c o ndensation pipe. It is pumping hot freon gas around the cabinet to prevent
“sweating” on the outer wall of the cabinet.
7
Page 3
FEATURE CHART
MODEL :
GR-191
GR-231
MODEL :
GN-151
GR-161
Egg Pocket
Shelf
Detachable for maximum
efficiency
Magic Crisper
3
6
Magnetic Gasket
Page 4
TEMPERATURE CONTROL
Your refrigerator has six option of thermo control to meet
individual requirement. Initially please turn at middle
position (2) if you want colder temperature turn to clockwise
and turn to counter clockwise to gain warmer temperature.
Do not turn at range 0 - 1 because it is not your thermo
control operating range.
TEMPERATURE
CONTROL
ICE MAKING
To make ice cubes, fill the ice cube tray with water to
slightly below the rim and place it in the freezer.
To remove ice cubes, hold the tray at its end and twist
gently.
.
TIP
on the tray before twisting.
DEFROSTING
It is necessary to regularly defrost your refrigerator in order to ensure efficient
operation. The frost on the surface of evaporator should not exceed 6 mm before
defrosting.
To remove ice cubes easily, run water
To defrost, press the defrosting button.
Remove food from the evaporator before you start defrosting operation.
When defrosting complete, defrosting button will return to normal position
automatically. Remove the drip tray, empty water, dry and put it back to its normal
position.
Loading...