LG GL-221ALLB Owner’s Manual
OWNER'S MANUAL
REFRIGERATOR
ENGLISH
Please read this manual carefully before operating
your set and retain it for future reference
P/No. : MFL69189003 (Rev. 1)
CONTENTS
BASIC SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Lamp Replacement (Optional)
LED Replacement (Optional)
IDENTIFICATION OF PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SUGGESTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features
Useful suggestions
Important Warning
BEFORE CALLING FOR SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2
BASIC SAFETY PRECAUTIONS
This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol, it alerts you to safety messages that inform you of hazards that can
Kill or hurt you or others or cause damage to the product. All safety messages will be preceded by
the Safety alert symbol and the hazard signal word DANGER, WARNING, or CAUTION These
words mean:
DANGER
WARNING
CAUTION
All safety messages will identify the hazard tell you how to reduce the chance of injury and tell you what
Can happen if the instructions are not followed.
You will be hurt or seriously injured if you don’t follow instructions.
You will be killed or seriously injured if you don’t follow instructions
Indicates an imminently hazardous situation Which if not avoided may
result in minor or Moderate injury or product damage only
WARNING
Keep ventilation openings, in the appliance enclosure or in
the built-in-structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartment, unless they are recommended by the
manufacturer.
The refrigerant and insulation blowing gas used in the
appliance requires special disposal procedures. When
disposal, please consult with services agent or a similarly
qualified person.
Be careful that your fingers are not caught in Hinge, Grille Fan
Assy, etc.
Disposal of your old appliance (as per e-waste Rules)
1. All electrical and electronic products should be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
authorities.
2. The correct disposal of your old appliance will help prevent potential negative consensus
for the environment and human health.
3. For more detailed information about the disposal of your old appliances, please contact your city
office, waste disposal service or the shop where you purchased the product.
(*NOTE - 1,2,3 are applicable for Jordan Regulations and other countries as per applicability)
4. Hazards of improper handling or accidental breakage :
a. The refrigerant (R134a) used, if overexposed, might cause dizziness and loss of concentration.
Liquid contact can cause irritation and frostbite. The refrigerant (R600a), squirting out of the pipes
could ignite or cause eye injury.
b. The blowing agent cyclopentane is highly flammable liquid and vapor, harmful to aquatic life.
Contact with liquid may cause cold burns/frost bites. Repeated exposure cause skin dryness.
3
IMPORTANT SAFETY INFORMATION
If gas used is R600a
This appliance contains a small amount of isobutane refrigerant
(R600a), natural gas with high environmental compatibility, but it is
also combustible. When transporting and installing the appliance,
care should be taken to ensure that no parts of the refrigerating circuit
are damaged. Refrigerant squirting out of the pipes could ignite or
cause an eye injury. If a leak is detected, avoid any naked flames or
potential sources of ignition and ventilate the room in which the
appliance is installed for several minutes.
Never start up an appliance showing any signs of damage. If any
doubt, consult your dealer.
INSTALLATION
1. INSTRUCTION
Unpack the refrigerator and locate at desired location.
Refrigerator should be located properly in ventilated area.
Move refrigerator only in front or side direction. Do not move in angle or zigzag direction.
2. LEVELLING
Levelling of refrigerator should be done with front leg. Refrigerator should be levelled with front to back inclination for
base.
200mm
200mm200mm
STARTING
Normal
Normal
R134a
g
Before loading let run refrigerator for 24 hrs. in normal position.
DEFROST KNOB
R600a
EARTHING
220V~240V - 50Hz
g
Use electrical connection
with 3-pin for earthing.
4
Loading...