LG GF-6D725BGL Quick Guide

Part Names and Functions

Specications

Connecting and Disconnecting Devices

Bluetooth Sound Bar

MODEL : GB-B1**

OWNER’S MANUAL

Please read this manual carefully before operating and retain it for
future reference.

Front panel

1

LED Indicator

Button (Pairing)

2

1

LED Indicator : Shows the status of the product.

Button (Pairing) : Press to connect or disconnect with a Bluetooth device.

2

LED status Speaker status

LED turned off Power off, disconnected

LED ashes slowly Turning on the power

LED ashes quickly Waiting for a Bluetooth connection (pairing)

LED turns on Completed a Bluetooth connection (pairing)

Rear panel

Power switch

1

Power cord

2

Power switch : Used to turn the power ON/OFF.

1

Power cord : Connect the power plug to an electrical outlet.

2

Vent holeVent hole

General

Dimensions (W x H x D) Approx. 552 mm x 33 mm x 105 mm (21.7” x 1.3” x 4.1”)

Net Weight Approx. 1.1 kg (2.42 lb)

Power Consumption 4.8W

Voltage Rating 100-240 V~

Operating Temperature 5 °C to 35 °C (41 °F to 95 °F)

Operating Humidity 5 % to 90 %

Amplier

Total

THD 1%

Speaker

Type Built-in

Impedance Rate

Rated Input Power 5 W

Max. Input Power 10 W

• Design and product specications could change without any prior notice.

• Wireless communication devices cannot be used to provide services critical to

personal safety because there is a possibility of electrical wave interference
while they are in use.

• This device is suitable for home (B grade) electromagnetic wave and for home
use, and it can be used in all regions.

5 W + 5 W(8 Ω at 1 kHz)

8 Ω

About Bluetooth.

Bluetooth is a wireless communication technology used for short distance
transmissions.
Bluetooth connections can be made within a 32-foot (10-meter) range.
(Bluetooth connections can be interfered with by radio waves or other
Bluetooth devices.)

There is no cost to connect Bluetooth devices.

Devices which support Bluetooth include mobile phones, MP3 players,
notebook computers, PDAs, and PMPs.

Bluetooth Prole.

To use this Bluetooth wireless technology, the paired device should support
the A2DP prole (Advanced Audio Distribution Prole).

Turn on the switch at the back of the product.

1

Enable Bluetooth on your device. When the LED indicator on the

2

front of the sound bar begins to ash quickly, pair the sound bar

and your Bluetooth device using Bluetooth tethering.

Within 32 ft

When the sound bar is successfully paired with the Bluetooth device,

3

the LED indicator stays ON.

Play music on the Bluetooth device.

4

Pressing the pairing button on the front of the sound bar or disabling

5

Bluetooth on your device causes Bluetooth to disconnect and the
music to stop.

Caution

• Some Bluetooth devices may not function properly with this product.

• When there is an obstacle or a person between the product and a
Bluetooth device, connection may not be made or may disengage

even within 32 ft (10 m).

• As the distance between the product and a Bluetooth device
becomes greater, the connection may not work properly.

• Other Bluetooth devices which use the same frequency, such as
medical devices, microwave ovens, or wireless LANs, may interfere

with the connection between the sound bar and a Bluetooth device.

• Be cautious that volume control cannot be made to some Bluetooth

devices connected by a Bluetooth dongle.

• Maximum output could be a bit low with some Bluetooth devices.

• Cards with magnetic strips, or other objects which can be damaged
by magnetic elds, should not be placed close to the sound bar.

Notice

• Select “LG_Refrigerator: XXXX” in the Bluetooth device.
(XXXX stands for the last four digits of Bluetooth

address.)

• Input four-digit PIN code(0000) when required by the

Bluetooth device.

• Pairing method could differ by Bluetooth device.

Try searching again if the address of the product is not
found under the list of connectable devices.

• Refer to the manual of the Bluetooth device for the

method of playing music.

• After the music begins to play, make any necessary

adjustments to the volume on the Bluetooth device.

• If the product fails to pair with the Bluetooth device for

more than 10 minutes, it goes into wait mode.

• Press the pairing button to enable pairing when the

product is in wait mode.

• The Bluetooth device once paired with the product

could be paired again without pressing the button.

• When the product is turned on again after turnoff, a

Bluetooth device has to be reconnected.

• This product cannot operate a Bluetooth device, and

multi-connection is not supported.

• The product doesn’t support telephone function, and

making or receiving a call while playing music stops the
music.

• Playing at the maximum volume of a Bluetooth device

could distort the sound.

• Accumulated dust or foreign substances could decrease

sound quality. Refer to ‘cleaning procedure’ at the back

of this manual.

http://www.lg.com

Safety Information

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

This guide contains many important safety messages. Always read and obey all safety
messages.

This is the safety alert symbol. It alerts you to safety messages that inform you of

hazards that can kill or hurt you or others, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard
signal word WARNING or CAUTION. These words mean:

WARNING You can be killed or seriously injured if you do not follow instructions.

CAUTION Indicates an imminently hazardous situation which, if not avoided, may

result in minor or moderate injury, or product damage.

WARNING

To reduce the risk of re, electric shock, or personal injury when using this product,
follow basic safety precautions, including the following:

Power

• When using a multi-electricity outlet, do not plug-in multiple products at the same time.

• Be cautious that power cord is not upturned or power plug is not pressed by the back of the

product.

• Unplug while cleaning.

• Do not touch a power plug with wet hands.

• Remove moisture and dust from the power plug rst and rmly plug in to an electrical outlet.

• When unplugging, do not pull the power cord but hold the power plug.

• When power cord or an power plug are damaged, or electricity outlet holes become loose,
stop using and contact the LG Electronics service center.

• Unplug during lightning storms or when the product is not used for a long period of time.

• Do not force the power cord to be bent or damaged by placing a heavy object on it.

• Do not extend the length of the power cord or modify it.

Use

• Only qualied LG Electronics service center personnel should disassemble, repair, or modify
the product. Consult with LG Electronics service center for reinstallation.

• Do not use or stock re devices or combustible materials (ether, benzene, alcohol, chemicals,
LP gas, combustible spray, pesticide, air freshener, cosmetics, etc.) on or near the product.

• Do not place objects, or containers with liquids or ammable substances on the product.

• Do not insert or drop metals (coins, hairpins, needles) or inammable substances (matches,
paper) in the ventilation holes.

Disposal

• Dispose of all packing materials including vinyl and Styrofoam out of the reach of children.

WARNING

This product contains chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after handling.

CAUTION

Installation

• Do not install in areas with high moisture or where it will be exposed to water or weather.

• Install by directly attaching on the surface of a refrigerator top.

• Do not install in a conned space such as in the drawer or kitchen sink.

• Do not install in a location which is unstable or has high vibration.

• Do not place near a magnetic eld such as near a magnet.

• Do not install in direct sunlight.

Use

• Do not drop an object or inict a shock on the product.

• Be careful when carrying the product.

• Do not use at excessive volume for a long period of time.

• Do not use the product on a blanket, an electric pad, or a carpet for a long period of time.

• Do not block the ventilation holes with tablecloths, curtains, or other obstructions.

Troubleshooting

No power.

• Insert the power plug into the electricity outlet correctly and rmly.

• Check if the power switch is on.

No sound or sound distortion

• The unit or your smart device’s volume is set to minimum. Check and
adjust the volume of the unit or bluetooth device’s volume.

• When you use an external device at high volume, the sound quality

may be deteriorated. Lower the volume of the devices.

• If you use the unit for purposes other than listening to music, the
sound quality may be lowered or the unit may not work properly.

Bluetooth pairing does not work well.

• Switch bluetooth off and on again on your bluetooth device, then try

pairing again.

• Remove the obstacle in the path of the bluetooth device and the

unit.

• Depending on the type of the bluetooth device or surrounding
environment, your device may not be paired with the unit.

• If your bluetooth device is connected to another unit, disable that
bluetooth connection rst.

The unit does not operate normally.

• When product doesn’t operate normally, check the status after

turning off and turning on the power switch.

Regulation Notice for Transmitter Module Contained in Refrigerator

FCC Statement:

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- Reorient or relocate the receiving antenna

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20 cm between the radiator and your body. End users must follow the specic operating
instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

Industry Canada Statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the

following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may cause

undesired operation of the device

Note: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modications to this equipment. Such modications could void the user’s
authority to operate the equipment.

IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance

20 cm between the radiator and your body.

Operation of the equipment is subject to the following two conditions:

(1) this equipment or device may not be used to cause harmful interference and
(2) this equipment or device must accept any interference, including interference that

may cause undesirable operation.

Installation

• Do not place a heavy object on the product.