LG GF24BGS, GF22BGSK Owner's Manual
ENGLISH
ENGLISH ESPAÑOL
OWNER’S MANUAL
FRENCH DOOR
REFRIGERATOR
Please read this owner’s manual thoroughly before
operating and keep it handy for reference at all times.
Model Name/Nombre del modelo **=color number/número de color
LFC22770**
LFC24770**
LFNS22520*
LRFNS2200*
P/No.: MFL67851601-15
LFC24786**
GF24BGS
LFCS22520*
GF22BGS GF24BGSK
GM-B223RSNM
GF22BGSK LFNS22530*
Copyright © 2013 - 2020 LG Electronics Inc. All Rights Reserved.
GF22BGSK1
www.lg.com
2TABLE OF CONTENTS
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 IMPORTANT SAFETY
INSTRUCTIONS
7 COMPONENTS
7 Refrigerator Exterior
8 Refrigerator Interior
9 INSTALLATION
9 Installation Overview
11 Unpacking Your Refrigerator
11 Choosing the Proper Location
11 - Flooring
12 - Ambient Temperature
12 - Measuring the Clearances
12 Removing/Assembling the Refrigerator
Door Handles
13 Removing/Assembling the Freezer
Drawer Handle
13 Removing/Assembling the Doors and
Drawers
14 - Removing the Left Refrigerator Door
15 - Removing the Right Refrigerator Door
16 - Assembling the Right Refrigerator Door
17 - Assembling the Left Refrigerator Door
18 - Removing the Freezer Drawers
19 - Assembling the Freezer Drawers
20 Connecting the Water Line
20 - Before You Begin
20 - Water Pressure
20 - What You Will Need
22 - Water Line Installation Instructions
24 Turning On the Power
24 Leveling and Door Alignment
24 - Leveling
25 - Door Alignment
26 HOW TO USE
26 Before Use
27 Control Pad
27 - Control Pad Features
28 Automatic Icemaker
29 - Normal Sounds You May Hear
29 - Preparing for Vacation
30 Storing Food
30 - Food Preservation Location
31 - Food Storage Tips
31 - Storing Frozen Food
32 Humidity Controlled Crisper and
Glide’N’Serve
33 Detaching and Assembling the Storage Bins
34 Adjusting the Refrigerator Shelves
35 MAINTENANCE
35 Cleaning
36 SMART DIAGNOSIS
36 Using Smart Diagnosis
TM
TM
37 TROUBLESHOOTING
44 WARRANTY
ENGLISH
3 PRODUCT FEATURES
PRODUCT FEATURES
ENGLISH
* Depending on the model, some of the following functions may not be available.
DOOR ALARM
The Door Alarm function is designed to prevent refrigerator malfunctioning
that could occur if a refrigerator door or freezer drawer remains open. If a
refrigerator door or freezer drawer is left open for more than 60 seconds,
a warning alarm sounds at 30 second intervals.
HUMIDITY CONTROLLED CRISPERS
The Humidity Controlled Crispers are designed to help keep your fruits
and vegetables fresh and crisp. You can control the amount of humidity
in the crispers by adjusting the settings between Low and High.
GLIDE‘N’SERVE
Glide‘N’Serve provides storage space with a variable temperature control
that keeps the compartme
place to store sandwiches or meat to be cooked.
nt colder than the refrigerator. It is a convenient
AUTO CLOSING HINGE
The refrigerator doors and freezer drawers close automatically with a
slight push. (The door only closes automatically when it is open at an
angle less than 30°.)
ICE PLUS
Ice production can be increased by approximately 20 percent when the
freezer section is maintained at the coldest temperature for a 24-hour
period.
4IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of
hazards that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word WARNING or CAUTION. These words mean:
WARNING
CAUTION
minor or moderate injury, or product damage.
basic safety precautions should be followed, including the following:
Power
pull it straight out from the outlet.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
cracks or abrasion damage along its length or at either the plug or connector end.
Unplug the power plug immediately in the event of a blackout or thunderstorm.
Plug in the power plug with the power cord facing downward.
Do not use extension cords and adapters ungrounded.
Installation
Contact an authorized service center when you install or relocate the refrigerator.
When moving your refrigerator away from the wall, be careful not to roll over or damage the
power cord.
Prior to use, ensure that you are connecting this product to a dedicated grounded electrical
outlet rated for use with this product (115/127V ~ 60Hz, AC only). It is the user’s responsibility to
replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.
Do not install the refrigerator where there may be a danger of the unit falling.
Use
DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in
the refrigerator. They could damage the refrigerator and seriously injure themselves.
Do not hang on to or place heavy objects on the refrigerator’s dispenser.
Do not place heavy or dangerous objects (bottles with liquid) on the refrigerator.
Do not put live animals inside the refrigerator.
Do not allow children to climb into the product when it is in use.
In the event of a gas leak (propane/LPG), ensure adequate ventilation and contact an
authorized service center before resuming use. Do not touch or disassemble the electrical
outlet of the refrigerator.
adequate ventilation and contact an authorized service center.
refrigerator or store them inside the refrigerator. Do not place the refrigerator in the vicinity of
You can be killed or seriously injured if you do not follow these instructions.
Indicates an imminently hazardous situation which, if not avoided, may result in
ENGLISH
5 IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
ENGLISH
safety precautions should be followed, including the following:
This product is not to be used for special purposes such as the storage of medicine or test
materials or for use on ships, etc.
refrigerator and reset the control of thermostat (refrigerator or freezer) to the desire position.
power.
Do not modify or extend the power cord.
Do not use a dryer to dry the interior. Do not light a candle to remove interior odors.
For your safety, this appliance must be properly grounded. Have the wall outlet and the circuit
the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall
outlet.
Do not, under any circumstances, cut or remove the third (ground) prong from the power
cord.
Do not use an adapter plug and plug the power plug into a multi-outlet extension cord.
Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect
smoke coming from the appliance.
Do not disassemble or modify the refrigerator.
Do not put hands, feet, or metal objects below or behind the refrigerator.
Do not operate the refrigerator or touch the power cord with wet hands.
In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector
hands on the automatic ice-making mechanism while the refrigerator is plugged in.
When dispensing ice from the dispenser, do not use crystal ceramics.
Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when
your refrigerator is in operation.
Do not put glass containers, glass bottles or soda in the freezer.
This appliance is not intended for use by persons (including children) with reduced
physi c a l, se n sor y or mental capabilitie s , or lack of experie n c e an d knowledge,
unless they have been given super vision or instruction concerning the use of the
appliance by a person responsible for their safety. Children should be supervised to assure that
they do not play with the appliance.
Do not refreeze frozen food that has thawed completely. Doing so may result in a serious
health issue.
If yo u a re t hr owi n g away y ou r ol d re f ri ge r at or, ma k e su r e th e CF C or H CFC
HCF C coolant, you may be
environmental law.
Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days.
the doors but leave the shelves in place so that children may not easily climb inside.
If the refrigerator is connected to a circuit protected by fuses, use time delay fuses.
If the use of this unit is no longer needed, please contact local authorities to dispose of this
product in a safe way due contains Pentane-cycle or pentane like gas for insulation. Insulation
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
RTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the risk of re, electric shock, or personal injury when using your product, basic
safety precautions should be followed, including the following:
Risk of Fire and Flammable Materials
*Refrigerant type is indicated in the label inside your refrigerator, this warning apply just for
models with R600a refrigerant.
This appliance contains a small amount of isobutane refrigerant (R600a), which is combus
tible. When transporting and installing the appliance, care should be taken to ensure that no
parts of the refrigerating circuit are damaged. Refrigerant squirting out of the pipes could
of ignition and air the room in which the appliance is standing for several minutes.
occurs, the size of the room in which the appliance may be sited depends on the amount of
refrigerant used. The room must be 10.8 square feet (1 square meter) in size for every 8g of
R600a refrigerant inside the appliance. The amount of refrigerant in your particular appliance
any signs of damage. If in doubt, consult your dealer.
CAUTION
Installation
The refrigerator must be properly installed in accordance with the Installer Instructions that
were taped to the front of the refrigerator.
Be careful when you unpack and install the refrigerator. Immediately dispose of plastic and
other packing materials out of the reach of children.
The appliance must be positioned for easy access to a power source.
Use
Close the door carefully when children are around.
ssarily small. Be careful closing doors when children are nearby.
If you store food improperly, be aware that it may fall and cause injury.
Do not use aerosols near the refrigerator.
Do not store articles on the top of the appliance.
Maintenance
Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth.
areas regularly.
Do not store, disassemble or repair the refrigerator by yourself.
Remove any dust or foreign matter from the power plug pins.
Do not use a wet or damp cloth when cleaning the plug.
fore plugging it back in.
If you notice a chemical or burning plastic smell or see smoke, unplug the refrigerator imme-
diately and contact your LG Electronics Service Center.
6IMPO
ENGLISH
-
WARNING
DO NOT USE MECHANICAL DEVICES
Do not use mechanical devices or other
means to accelerate the defrosting
process, only those recommended by
the manufacturer.
SAVE THESE INSTRUCTIONS
WARNING
DO NOT STORE ELECTRICAL
APPLIANCES, do not use electrical
appliances inside the food storage
compartment, unless they are
recommended by the manufacturer.
7 COMPONENTS
COMPONENTS
ENGLISH
Use this page to become more familiar with the parts and features of your refrigerator. Page
references are included for your convenience.
Refrigerator Exterior
Handle
Opens and closes
the door.
Refrigerator
Preserves food.
Ez Handle
Easily open the freezer door.
Freezer
Preserves frozen food.
8COMPONENTS
Refrigerator Interior
* Optional Parts : Not included with all models.
LED interior lamps
The interior lamps light up the inside
of the refrigerator.
Fixed Door Bin*
Used to preser ve
ch il le d f o od o r
drinks.
Crisper
Co ntr ols hu mid ity and help s
vegetables and fruit to stay crisp.
Icemaker*
Ice cubes are
automatically produced.
Ice Bin*
(included with icemaker)
Can be removed to
ENGLISH
Adjustable Refrigerator Shelf
The shelves in your refrigerator are
ad jus tab le to mee t you r ind ivi dua l
storage needs. (Half or full Type)
Dairy Product Bin*
Us ed t o p re se rve
dairy products.
(some models only)
Modular Door Bins
Interchangeable bins
can be arrang ed to
su it yo ur s to rag e
needs.
Auto Closing Hinge
Th e re frigerato r do ors
and freezer drawers close
automatically when you
push them slightly.
(Th e do or only closes
automatically when it is
open at an angle of less
than 30°.)
or pitchers.
Pullout Drawer
Used for extra storage within the
freezer compartment.
Glide'N'Serve
Used for large party trays,
deli items and beverages.
Durabase® and Durabase® Divider
T h e D ur a b a s e is a st o r a g e sp a c e
recommended for the preservation of large
food items. The Durabase Divider is used to
organize the Durabase area into sections.
It can be adj usted from si de to si de to
9 INSTALLATION
INSTALLATION
ENGLISH
Installation Overview
to another location.
1 Unpacking your
refrigerator
4 Connecting the water
supply and water line
“This appliance is intended to be used in household and similar applications such as:
motels and others residential type environments.
-Bed and breakfast type environments; catering and similar non-reatil applications.”
2 Choosing the proper
location
5 Leveling and Door
Alignment
3 Disassembling/Assembling
10INSTALLATION
Specifications
The appearance and specications listed in this manual may vary due to constant product
improvements.
32 3/4" (W) X 35 1/2" (D) X 69 7/8" (H), 46" (D w/ door open)
833 mm (W) X 901 mm (D) X 1775.5 mm (H), 1168.5 mm (D w/
door open)
29 3/4" (W) X 35 1/2" (D) X 68 1/2" (H), 44 3/4" (D w/ door open)
756 mm (W) X 901 mm (D) X 1740 mm (H), 1137 mm
(D w/ door open)
253 lb. (115 kg)
237.4 lb. (107.9 kg)
Dimensions
Net weight
Width
32 3/4 in.
(833 mm)
Width
29 3/4 in.
(756 mm)
Width
32 3/4 in.
(833 mm)
Width
29 3/4 in.
(756 mm)
ENGLISH
11 INSTALLATION
Unpacking Your Refrigerator
ENGLISH
WARNING
Use two or more people to move and
install the refrigerator. Failure to do so
can result in back or other injury.
Your refrigerator is heavy. When moving
the refrigerator for cleaning or service,
be sure to protect the floor. Always
pull the refrigerator straight out when
moving it. Do not wiggle or walk the
refrigerator when trying to move it, as
floor damage could occur.
Keep flammable materials and vapors,
such as ga s ol in e, aw ay from the
refrigerator. Failure to do so can result
in fire, explosion, or death.
Remove tape and any temporary labels from
your refrigerator before using. Please remove
vinyl from doors before connecting unit to the
electrical supply (on some models). Do not
remove any warning type labels, the model
and serial number label, or the Tech Sheet that
is located under the front of the refrigerator.
Choosing the Proper Location
Select a place where a water supply can
be easily connected for the automatic
icemaker.
NOTE
The water pressure must be between
20 and 120 psi (0,14 - 0,82 MPa) on models
without a water lter and between 40 and
120 psi (0,28 - 0,82 MPa) on models with a
water lter
The refrigerator should al ways be plugged
into its own individual properly grounded
electrical outlet rated for 115/127 V ~ 60 Hz,
AC only, and fused at 15 or 20 A.
This provides the best performance
and also prevents overloading house
hazar d from overheated wires. It is
recommended that a separate circuit
serving only this appliance be provided.
WARNING
To reduce the risk of electric shock, do not
install the refrigerator in a wet or damp area.
To remove any remaining tape or glue, rub the
area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a
small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage
the surface of your refrigerator.
Refrigerator shelves are installed in the shipping position. Please reinstall shelves according
to your individual storage needs.
Flooring
To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed
floor. If required, adjust the leveling legs to
compensate for unevenness of the floor. The
front should be slightly higher than the rear to
aid in door closing. Leveling legs can be turned
easily by tipping the cabinet slightly. Turn the
leveling legs to the left to raise the unit or to
the right to lower it. (See Leveling and Door
Alignment.)
NOTE
Installing on carpeting, soft tile surfaces, a
platform or weakly supported structure is
not recommended.
12INSTALLATION
Ambient Temperature
Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be adversely aected.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and increased electricity consumption charges. Allow
at least 24 inches (61 cm) in front of the refrigerator to open the doors, and at least 2 inches
(5.08 cm) between the back of the refrigerator
and the wall.
24” (61 cm)
Removing/Assembling the
Refrigerator Door Handles
NOTE
When it is necessary to move the refrigerator
through a narrow opening, removing the
doors is the recommended procedure. If it
is necessary to remove the handles, follow
the directions below. The appearance of the
handle may vary from what is shown in the
illustrations
Removing the Handles
Loosen the set screws with a 3/32 in.
1
(2.5 mm)
Loosen the mounting fasteners that
2
connect to the refrigerator door and handle
using a ¼ in.
remove the mounting fasteners.
Allen wrench and remove the handle.
(6.35 mm)
Allen wrench,
ENGLISH
2” (5.08 cm)
Assembling the Handles
Assemble the mounting fasteners at
1
both ends of the handle using a ¼ in.
(6.35 mm)
Place the handle on the door by tting
2
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in.
Allen wrench.
(2.5 mm)
Allen wrench.
13 INSTALLATION
Removing/Assembling the
ENGLISH
Freezer Drawer Handle
Removing the Handle
Loosen the set screws located on the
1
lower side of the handle with a
Allen wrench and remove the handle.
Loosen the mounting fasteners that
2
connect to the
freezer drawer
and handle
using a
(6.35 mm)
Allen wrench,
and remove
the mounting
fasteners.
Assembling the Handle
Assemble the mounting fasteners at
1
both ends of the handle using a
(6.35 mm)
2
handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a 3/32 in.
(2.5 mm)
Allen wrench.
1
/4 in.
wrench.
3/32
in.
1
/4 in. Allen
Removing/Assembling the
Doors and Drawers
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
(2.5mm)
WARNING
yIf your entrance door is too narrow
for the refrigerator to pass through,
remove the refrigerator doors and move
the refrigerator side ways through the
doorway.
yUse two or more people to remove and
install the refrigerator doors. Failure to
do so can result in back or other injury.
yDisconnect the electrical supply to the
refrigerator before installation. Failure
to do so could result in serious injury or
death.
yDo not put hands, feet or other objects
into the air vents or bottom of the
refrigerator. You may be injured or
receive an electrical shock.
yBe careful when handling the hinge and
stopper. You may be injured.
yRemove food and bins before detaching
the doors and drawers.
WARNING
When assembling or disassembling the
handle:
yGrasp the handle tightly to avoid drop-
ping it.
yDo not swing the handle into nearby
people or animals.
yMake sure that the bracket hole of the
bolt of the door. Assemble the set
yMake sure that there is not a gap
between the door and handle after
assembling the handle.
INSTALLATION
14
Removing the Left Refrigerator Door
Remove the top hinge cover screws . Lift
1
the hook (not visible), located at the bottom
of the front side of the cover
head screwdriver.
2
Disconnect the wire harness
2
Remove the grounding screw 4.
3
3
.
1
2
Remove the three bolts using a 10mm or
4
hinge. Set parts aside.
CAUTION
When lifting the hinge, be careful that the
door does not fall forward.
Lift the door from the middle hinge pin and
5
remove the door.
ENGLISH
4
6
3
5
CAUTION
Place the door, inside facing up, on a
non-scratching surface.
15 INSTALLATION
Removing the Right Refrigerator Door
ENGLISH
Remove the top hinge cover screws . Lift
1
the hook (not visible), located at the bottom
of the front side of the cover
head screwdriver.
Remove the three bolts using a 10mm or
2
13/32-inch socket wrench and lift o the top
hinge. Set parts aside.
. with a at-
2
Lift the door from the middle hinge pin and
3
remove the door.
CAUTION
Place the door, inside facing up, on a
non-scratching surface.
CAUTION
When lifting the hinge, be careful that the
door does not fall forward.
16INSTALLATION
Assembling the Right Refrigerator
Door
Install the right-side door rst.
Make sure that the plastic sleeve is
1
inserted in the bottom of the door. Lower
the door onto the middle hinge pin as
shown in the gure.
Align the door with the cabinet
2
Line up the holes in the top hinge with the
3
holes in the top of the refrigerator. Insert
and tighten the three bolts in the hinge.
Replace the hinge cover . Insert and
4
tighten the cover screws
2
.
2
ENGLISH
17 INSTALLATION
Assembling the Left Refrigerator
ENGLISH
Door
Install the left refrigerator door after the right
door is installed.
Make sure that the plastic sleeve is inserted
1
in the bottom of the door. Install the
refrigerator door onto the middle hinge.
Replace the grounding screw 3.
4
Reconnect the wire harness 4.
5
Replace the hinge cover 5. Insert and
6
tighten the cover screws
6
6
5
.
Align the door with the cabinet
2
Line up the holes in the top hinge with the
3
holes in the top of the refrigerator. Insert
and tighten the three bolts in the hinge.
3
4
18INSTALLATION
Removing the Freezer Drawers
The top, middle and bottom drawers are all
removed in the same way.
freezer drawer is not shown for clarity.
In the following
CAUTION
yUse two or more people to remove and
install the freezer drawer. Failure to do
so can result in back or other injury.
yDo not hold the handle when removing
or replacing the drawer. The handle may
yBe careful of sharp hinges on both sides
of the drawer.
yWhen you lay the drawer down, be
yDo not sit or stand on the freezer drawer.
yTo prevent accidents, keep children and
pets away from the drawer. Do not leave
the drawer open.
Slide out the bar.
4
CAUTION
Do not hold the handle when removing or
replacing the drawer. The handle may come
Grip both sides of the drawer and pull it up
5
to remove it from the rails.
ENGLISH
Pull the drawer open to full extension.
1
Lift the DuraBase basket up and out, making
2
sure to clear the rail system.
Remove the screws at the ends of both rails
3
Holding one rail with each hand, push the
6
rails in simultaneously.
19 INSTALLATION
Assembling the Freezer Drawers
ENGLISH
The top, middle and bottom drawers are all
assembled in the same way.
Using two hands, pull out both rails
1
simultaneously until they are fully extended.
Reinstall the bar in the drawer supports.
3
4
tighten the screws located on both sides.
Grasp the drawer on each side and hook the
2
drawer supports into the rail tabs located on
both sides.
CAUTION
Do not hold the handle when removing or
replacing the drawer. The handle may come
3
1
2
W ith the drawer pulled out to full extension,
5
insert the lower basket in the rail assembly.
20INSTALLATION
Connecting the Water Line
(Ice Maker installed only)
Before You Begin
This water line installation is not covered by the
refrigerator warranty. Follow these instructions
carefully to minimize the risk of expensive water
damage.
Water hammer (water banging in the pipes)
in house plumbing can cause damage to
refrigerator parts and can lead to water leakage
water hammer before installing the water supply
line to the refrigerator.
CAUTION
To prevent burns and product damage, only
connect the refrigerator water line to a cold
water supply.
If you use your refrigerator before connecting
the water line, make sure the icemaker power
switch is in the OFF (O) position.
CAUTION
Do not install the icemaker tubing in areas
where temperatures fall below freezing.
Water Pressure
You will need a cold water supply. The water
pressure must be between 20 and 120 psi
(0.14 y 0.82 MPa) on models without a water
connected to your cold water supply, this water
line installation is not covered by the refrigerator
warranty. Follow the following instructions
carefully to minimize the risk of expensive water
damage.
connected to your cold water supply, the water
pressure to the reverse osmosis system needs
to be a minimum of
40 to 60 psi (0,28 y 0,41 MPa)
CAUTION
Wear eye protection during installation to
prevent injury.
If the water pressure from the reverse osmosis
system is less than 21 psi or 0,14 MPa takes more
y
the reverse osmosis system is blocked.
yAllow the storage tank on the reverse
usage.
yIf the issue concerning water pressure
from reverse osmosis remains, call a
yAll installations must be in accordance
with local plumbing code requirements.
What You Will Need
.
Copper Tubing,
diameter, to connect the refrigerator to
the water supply. Be sure both ends of
To determine how
much tubing you need:
measure the distance
from the water valve on the back of the
refrigerator to the water supply pipe.
Then, add 8 feet (2.4 m).
(about 8 feet [2.4 m] coiled into three
turns of about 10 in. [25 cm] diameter)
to allow the refrigerator to move out
from the wall after installation.
.
Power drill.
.
½ in. (13 mm) or
adjustable wrench.
.
Flat blade and Phillips
head screwdrivers.
.
Two ¼ in. (6.35 mm)
outer diameter compression
nuts and 2 ferrules (sleeves)
the refrigerator water valve.
¼ in. (6.35 mm) outer
.erauqs tuc era gnibut eht
to connect the
ENGLISH
capacity
21 INSTALLATION
ENGLISH
yIf your existing copper water line
will need an adapter (available at
plumbing supply stores) to connect
the water line
to the
refrigerator OR
with a tube cutter and then use a
yShutoff valve to connect to the cold
water line.
have a water inlet with a minimum
inside diameter of 5/32 in. (4 mm) at
the point of connection to the COLD
valves are included in many water
supply kits.
Before
purchasing,
make sure
a saddletype valve
complies with your local plumbing
codes.
NOTE
A self-piercing saddle type water valve
should not be used.
22INSTALLATION
Water Line Installation Instructions
WARNING
yWhen using any electrical device (such
as a power drill) during installation, be
sure the device is battery powered,
double insulated or grounded in a
manner that will prevent the hazard of
electric shock.
used drinking water line.
SHUT OFF THE MAIN WATER SUPPOLE
1
Turn on the nearest faucet to relieve the
pressure on the line.
CHOOSE THE VALVE LOCATION
2
Choose a location
for the valve that is
easily accessible. It is
best to connect into
the side of a vertical
water pipe. When it is
necessary to connect
into a horizontal water pipe, make the
connection to the top or side, rather
any sediment from the water pipe.
FASTEN THE SHUTOFF VALVE
4
pipe with the pipe clamp.
Pipe Clamp
Saddle-Type
Vertical Cold
Water Pipe
NOTE
Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle
valves are illegal and use is not permitted in
Massachusetts. Consult with your licensed
plumber
country
TIGHTEN THE PIPE CLAMP
5
Tighten the clamp screws until the sealing
washer begins to swell.
NOTE:
Pipe Clamp
Clamp Screw
by norms and regulations of your
.
Do not overtighten clamp or
you may crush the tubing.
Washer
Inlet End
ENGLISH
DRILL THE HOLE FOR THE VALVE
3
Drill a 1/4 in. (6.35 mm) hole in
the water pipe using
a sharp bit. Remove
any burrs resulting
from drilling the
hole in the pipe.
Be careful not to
allow water to drain into the drill. Failure to
drill a ¼ in. hole may result in reduced ice
production or smaller cubes.
NOTE
The hookup line cannot be white, plastic
tubing. Licensed plumbers must use only
copper tubing (NDA tubing #49595 or #49599)
or Cross Link Polyethylene (PEX) tubing.
.
ROUTE THE TUBING
6
Route the tubing between the cold water
line and the refrigerator.
Route the tubing through a hole drilled in
adjacent base cabinet) as close to the wall
as possible.
.
NOTE
8 feet [2.4 m] coiled into 3 turns of about
10 in. [254 mm] diameter) to allow the
refrigerator to move out from the wall after
installation.
23 INSTALLATION
7
ENGLISH
Saddle-Type
Packing Nut
Outlet Valve
8
9
CONNECT THE TUBING TO THE VALVLE
Place the compression nut and ferrule
(sleeve) for copper tubing onto the end of
valve. Make sure the tubing is fully inserted
into the valve. Tighten the compression nut
securely.
Compression
Nut
Ferrule (sleeve)
FLUSH OUT THE TUBING
Turn the main water
out the tubing until the
water is clear.
the water valve after
about one quart of
CONNECT THE TUBING TO THE
REFRIGERATOR
Before making the connection to
NOTE:
the refrigerator, be sure that the refrigerator
power cord is not plugged into the wall
outlet.
TURN THE WATER ON AT THE
1 0
SHUTOFF VALVE
Tighten any connections that leak.
CAUTION
Check to see if leaks occur at the water line
connections.
PLUG IN THE REFRIGERATOR
1 1
Arrange the coil of tubing so that it does not
vibrate against the back of the refrigerator or
against the wall. Push the refrigerator back
to the wall.
START THE ICEMAKER
1 2
Set the icemaker power switch to the ON
position.
The icemaker will not begin to operate until
it reaches its operating temperature of 15°F
(–9°C) or below. It will then begin operation
automatically if the icemaker power switch
is in the
ON (I) position.
a
water valve.
b. Place the compression nut and ferrule (sleeve)
onto the end of the tubing as shown.
c. Insert the end of the copper tubing into the
connection as far as possible. While holding
Tubing Clamp
¼ in. Tubing
¼ in.
Compression
Nut
Ferrule (sleeve)
Refrigerator
Connection
WARNING
Never use old or used hoses. Always use
new ones to have a better use and
experience. Connect always to a potable
water source to avoid security and health
issues.
24INSTALLATION
Turning On The Power
Plug in the refrigerator.
1
CAUTION
yConnect to a rated power outlet.
y
the wall outlet and wiring for proper
grounding.
y
terminal of the power plug.
Leveling and Door Alignment
Leveling
After installing, plug the refrigerator’s power
cord into a 3-prong grounded outlet and push
Your refrigerator has two front leveling legs—
one on the right and one on the left. Adjust the
legs to alter the tilt from front-to-back or side-toside. If your refrigerator seems unsteady, or you
want the doors to close more easily, adjust the
refrigerator’s tilt using the instructions below:
Turn the leveling leg to the left to raise
1
that side of the refrigerator or to the right
to lower it. It may take several turns of
the leveling leg to adjust the tilt of the
refrigerator.
ENGLISH
NOTE
Open both doors again and check to make
2
sure that they close easily. If the doors do
not close easily, tilt the refrigerator slightly
more to the rear by turning both leveling
legs to the left. It may take several more
turns, and you should turn both leveling legs
the same amount.
25 INSTALLATION
Door Alignment
ENGLISH
Identify your Refrigerator Doors alignment type according the accesory included in your owner’s manual.
Door Alignment (Type 1)
Both the left and right refrigerator doors have
an adjustable nut, located on the bottom hinge,
to raise and lower them to align properly. If the
space between your doors is uneven, follow the
instructions below to align the doors evenly:
Use the wrench (included with the Owner’s
Manual) to turn the nut in the door hinge to
adjust the height. To the right to raise or to the
left to lower the height.
Door Alignment (Type 2)
If the spacing between the doors is uneven, follow the
instructions below to align them:
With one hand, lift up the door you want to raise at
1.
middle hinge.
With other hand, use pliers to insert snap ring as
2.
shown.
Insert additional snap rings until the doors are aligned
3.
(Three snap rings are provided per unit).
2
1
26HOW TO USE
HOW TO USE
Before use
Clean the refrigerator.
shipping.
yDo not scratch the refrigerator with a sharp object or use a detergent that
tape or adhesive from the refrigerator,.
y
information on the rear surface of the refrigerator.
Connect the power supply.
Check if the power supply is connected before use.
Read the “Turning On The Power” section.
Turn off the icemaker if the refrigerator is not yet connected to
the water supply. (Ice Maker installed only).
ENGLISH
CAUTION
NOTE
into the grounded electric outlet.
* This is applicable only to certain models.
CAUTION
Running the automatic icemaker before connecting it to the water supply
may cause the refrigerator to malfunction.
Wait for the refrigerator to cool.
Allow your refrigerator to run for at least two to three hours before putting food
cooling.
CAUTION
Putting food in the refrigerator before it has cooled could cause the food to
spoil, or a bad odor could remain inside the refrigerator.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature lowers.
Open refrigerator doors and freezer drawers to ventilate the interior.
tape from inside the refrigerator and open the refrigerator doors and the freezer
drawers for ventilation.
27 HOW TO USE
Control Pad
ENGLISH
* Depending on the model, some of the following functions may not be available.
Control Pad Features
LED Display Indicator
Control Button
Door
Refrigerator Temperature
Indicates the set temperature of the refrigerator
compartment in Celsius (°C) or Fahrenheit (°F).
Freezer Temperature
Indicates the set temperature of the freezer
compartment in Celsius (°C) or Fahrenheit (°F).
To change the temperature mode from °F to °C
(or vice versa) press and hold the Refrigerator
and Freezer temperature buttons simultaneously
indicator on the display window switches
between Celsius and Fahrenheit.
NOTE
The displayed temperature is the target
temperature, and not the actual temperature
of the refrigerator. The actual refrigerator
temperature depends on the food inside the
refrigerator.
Door Alarm
yWhen power is connected to the
refrigerator, the door alarm is initially set
to ON. When you press the
button, the display will change to OFF and
Door Alarm
the
yWhen either the refrigerator or the
freezer door is left open for more than 60
seconds, the alarm tone will sound to let
you know that the door is open.
yWhen you close the door, the door alarm
will stop.
Door
function will deactivate.
Door Alarm
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in
the refrigerator and freezer sections to
conserve energy while on display in a retail
store. When activated OFF will display
on the control panel and the display will
remain on for 20 seconds.
To deactivate / activate:
With either refrigerator door opened, press
and hold the Refrigerator and Ice Plus
Ice Plus
This function increases both ice making and
freezing capabilities.
yWhen you touch the
graphic will illuminate in the display and
will continue for 24 hours. The function
yYou can stop this function manually by
touching the button one more time.
Ice Plus
button, the
The control panel will beep and the
that Display Mode is deactivated. Use the
same procedure to activate Display Mode.
28HOW TO USE
Automatic Icemaker
(Ice Maker installed only).
(Freezer Room)
* Depending on the model, some of the
following functions may not be available.
Ice is made in the automatic icemaker and sent
to the dispenser. The icemaker will produce
12 cubes per cycle—approximately 120 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other operating
conditions.
yIt takes about 12 to 24 hours for a newly
installed refrigerator to begin making ice.
The water pressure must be between 20 and
y
120 psi (0,14 y 0,82 MPa) on models without
to produce the normal amount and size of ice
cubes.
Foreign substances or frost on the
y
ice-detecting sensor can interrupt ice
production. Make sure the sensor area is
clean at all times for proper operation.
Automatic
Shut O
Arm
Turning the Automatic Icemaker
On or Off
icemaker switch to
automatic icemaker, set the switch to
OFF (O)
Power Switch
. To turn on the
ON (I) .
ENGLISH
Loading...