LG GD1329QED, GD1329QGD, GD1329QEU, GD1329QGU, GD1329QES User Manual

...

OWNER'S MANUAL

COMMERCIAL DRYER

Please read this manual carefully before operating your dryer and retain it for future reference.

MODEL GD1329CGS / GD1329CES GD1329CGU / GD1329CEU GD1329CGD / GD1329CED

P/NO. : MFL62512817

GD1329QGS / GD1329QES GD1329QGU / GD1329QEU GD1329QGD / GD1329QED

PRODUCT FEATURES

OUTSTANDING PERFORMANCE

The dryer features the largest capacity, quick drying times, quiet operation, and an energy-saving system.

STAINLESS STEEL DRUM

Stainless steel drum doesn’t rust.

ARTISTIC DESIGN

Modern front panel look and big clear glass door make your dryer look stylish

EASY OF USE

An entire selection of user-friendly functions makes operating the dryer easy.

ULTRA CAPACITY

The larger drum enables better tumbling and less tangling and wrinkling of the laundry.

CONTENTS

PART 1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................................. 3

PART 2. SPECIFCATIONS .................................................................................................................................... 8

PART 3. IDENTIFICATION ..................................................................................................................................... 9

PART 4. OPERATING YOUR DRYER ................................................................................................................. 12

PART 5. PROGRAMMING MODE ....................................................................................................................... 13

PART 6. ERROR MODE ...................................................................................................................................... 38

PART 7. POWER FAIL RECOVERY ................................................................................................................... 38

PART 8. DEFAULT DRYER SETTINGS .............................................................................................................. 38

PART 9. WARRANTY .......................................................................................................................................... 39

Part 1 IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

For your safety, the information in this manual must be followed to minimize the risk

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words mean:

DANGER:

WARNING:

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

You can be killed or seriously injured if you don’t immediately follow instructions.

You can be killed or seriously injured if you don’t follow instructions.

BASIC SAFETY PRECAUTIONS

WARNING:

this appliance, follow basic precautions, including the following:

To reduce the risk of fire, electric shock, or injury to persons when using

• Read all instructions before using the dryer.

• Before use, the dryer must be properly installed as described in this manual.

• Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.

• Do not reach into the dryer if the drum or any other part is moving.

• Do not repair or replace any part of the dryer or attempt any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.

• Do not tamper with controls.

• Before the dryer is removed from service or

• Do not allow children to play on or in the dryer.

• Do not use fabric softeners or products to

• Do not use heat to dry articles containing foam

• Keep area around the exhaust opening and

• The interior of the dryer and exhaust vent should

• Do not install or store the dryer where it will be

• Always check the inside of the dryer for foreign

• Clean lint screen before or after each load.

discarded, remove the door to the drying compartment.

Close supervision of children is necessary when the dryer is used near children.

eliminate static unless recommended by the manufacturer of the fabric softener or product.

rubber or similarly textured rubber-like materials.

adjacent surrounding areas free from the accumulation of lint, dust, and dirt.

be cleaned periodically by qualified service personnel.

exposed to the weather.

objects.

Part 1 IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance or any other appliances.

For your safety, the information in this manual must be followed to minimize the risk of

• Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

WHAT TO DO IF YOU SMELL GAS:

1. Do not try to light a match or cigarette, or turn on any gas or electrical appliance.

2. Do not touch any electrical switches. Do not use any phone in your building.

3. Clear the room, building, or area of all occupants.

CALIFORNIA SAFE DRINkING WATER AND TOXIC ENFORCEMENT ACT

This act requires the governor of California to publish a list of substances known to the state to cause cancer, birth defects, or other reproductive harm and requires businesses to warn customers of potential exposure to such substances.

4. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions carefully.

5. If you cannot reach your gas supplier, call the fire department.

Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde, and soot, caused primarily by the incomplete combustion of natural gas or LP fuels.

Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be minimized further by properly venting the dryer to the outdoors.

Part 1 IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

For your safety, the information in this manual must be followed to minimize the risk

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance must be equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified

electrician or service

— Improper connection of

person if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This appliance must be connected to a grounded metal, permanent wiring system or an equipmentgrounding conductor must be run with the circuit conductors and connected to the equipmentgrounding terminal or lead on the appliance.

Electrical shock can result if the dryer is not properly grounded.

SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING

appliance, follow basic precautions, including the following:

• Properly ground dryer to conform with all governing codes and ordinances. Follow details in the installation instructions. Electrical shock can result if the dryer is not properly grounded.

• Before use, the dryer must be properly

installed as described in this manual.

Electrical shock can result if the dryer is not properly grounded.

• Install and store the dryer where it will not be

exposed to temperatures below freezing or exposed to the weather.

• All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this Owner’s Guide. Use only authorized factory parts. Failure to follow this

warning can cause serious injury, fire, electrical shock, or death.

To reduce the risk of fire, electric shock, or injury to persons when using this

• Connect to a properly rated, protected, and

sized power circuit to avoid electrical overload.

Improper power circuit can melt, creating electrical shock and/or fire hazard.

• Remove all packing items and dispose of all shipping materials properly. Failure to do so can result in death, explosion, fire, or burns.

• Place dryer at least 18 in. above the floor for a garage installation. Failure to do so can result in death, explosion, fire, or burns.

• Keep all packaging from children. Packaging material can be dangerous for children. There is a risk of suffocation.

• Keep the area underneath and around your

appliances free of combustible materials such as lint, paper, rags, chemicals, etc. Failure to do

so can result in fire.

• To reduce the risk of electric shock, do not install the dryer in humid spaces. Failure to follow this warning can cause serious injury, fire, electrical shock, or death.

Part 1 IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

For your safety, the information in this manual must be followed to minimize the risk

SAFETY INSTRUCTIONS FOR INSTALLATION

Exhaust/Ducting:

• Gas dryers MUST be exhausted to the outside. Failure to follow these instructions can result in fire or death.

• The dryer exhaust system must be exhausted

to the outside of the dwelling. If the dryer is not exhausted outdoors, some fine lint and large amounts of moisture will be expelled into the laundry area. An accumulation of lint in any

area of the home can create a health and fire hazard.

• Use only rigid metal or flexible metal 4-in.

diameter ductwork inside the dryer cabinet or for exhausting to the outside. Use of plastic or other combustible ductwork can cause a fire.

Punctured ductwork can cause a fire if it collapses or becomes otherwise restricted in use or during installation.

• Ductwork is not provided with the dryer, and

you should obtain the necessary ductwork locally. The end cap should have hinged dampers to prevent backdraft when the dryer is not in use. Failure to follow these instructions

can result in fire or death.

• The exhaust duct must be 4 in. (10 cm) in

diameter with no obstructions. The exhaust duct should be kept as short as possible. Make sure to clean any old ducts before installing your new dryer. Failure to follow these

instructions can result in fire or death.

• Rigid or semi rigid metal ducting is

recommended for use between the dryer and the wall. In special installations when it is impossible to make a connection with the above recommendations, a UL-listed flexible metal transition duct may be used between the dryer and wall connection only. The use of this ducting will affect drying time. Failure to follow

these instructions can result in fire or death.

• DO NOT use sheet metal screws or other

fasteners which extend into the duct that could catch lint and reduce the efficiency of the exhaust system. Secure all joints with duct tape.

For complete details, follow the Installation Instructions. Failure to follow these instructions can result in fire or death.

SAFETY INSTRUCTIONS FOR STEAM FUNCTIONS

WARNING:

appliance, follow basic precautions, including the following:

• Do not open the dryer door during steam cycles. Failure to follow these instructions can result in a burn hazard.

• Do not dry articles that have been previously

cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.

Failure to follow these instructions can result in fire or death.

To reduce the risk of fire, electric shock, or injury to persons when using this

• Do not fill the steam feeder with gasoline, dry-

cleaning solvents, or other flammable or explosive substances. Failure to follow these

instructions can result in fire or death.

• Do not touch the steam nozzle in the drum during or after the steam cycle. Failure to follow these instructions can result in a burn hazard.

• Do not fill the steam feeder with hot water (over 86° F / 30° C). Failure to follow these instructions can result in a burn hazard.

Part 1 IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

For your safety, the information in this manual must be followed to minimize the risk

SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY

WARNING:

appliance, follow basic precautions, including the following:

• Do not, under any circumstances, cut or

remove the ground prong from the power cord.

To prevent personal injury or damage to the dryer, the electrical power cord must be plugged into a properly grounded outlet.

• For personal safety, this dryer must be properly grounded. Failure to do so can result in electrical shock or injury.

• Refer to the installation instructions in this

manual for specific electrical requirements for your model. Failure to follow these instructions

can create an electrical shock hazard and/or a fire hazard.

• This dryer must be plugged into a properly

grounded outlet. Electrical shock can result if the dryer is not properly grounded. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Failure to follow these instructions can

create an electrical shock hazard and/or a fire hazard.

To reduce the risk of fire, electric shock, or injury to persons when using this

• Never unplug your dryer by pulling on the

power cord. Always grip plug firmly and pull straight out from the outlet. The power cord can

be damaged, resulting in a risk of fire and electrical shock.

• Repair or replace immediately all power cords

that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. The power cord can melt, creating

electrical shock and/or fire hazard.

• When installing or moving the dryer, be careful

not to pinch, crush, or damage the power cord.

This will prevent injury and prevent damage to the dryer from fire and electrical shock.

• To reduce the risk of personal injury, adhere to

all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety

warnings in this manual could result in property damage, personal injury or death.

• The dryer should always be plugged into its

own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

SAVE THESE INSTRUCTIONS

Part 2 SPECIFICATIONS

■ Type : Electric and Gas Dryer

■ Rating : Please refer to the rating label regarding detailed information.

■ Size : 686mm(W) x 764mm(H) x 983mm(D)

■ Capacity : IEC 7.1 cu.ft. (22.5 lb)

■ Weight : 131 Ibs (59.4 kg)

❋ Specifications are subject to change by manufacturer.

Note

Specifications subject to change by manufacturer.

IDENTIFICATIONPart 3

1 24

■ CARD TYPE

- SIDE BY SIDE(GD1329CGS, GD1329CES)

■ CARD TYPE

- STACK UPPER(GD1329CGU, GD1329CEU) STACK LOWER(GD1329CGD, GD1329CED)

1. DISPLAY LED

2. CYCLE BUTTON

3. START BUTTON

4. STATUS LED

Part 3 IDENTIFICATION

1 24

■ COIN TYPE

- SIDE BY SIDE(GD1329QGS, GD1329QES)

■ COIN TYPE

- STACK UPPER(GD1329QGU, GD1329QEU)

■ COIN TYPE

- STACK LOWER(GD1329QGD, GD1329QED)

1. DISPLAY LED

2. CYCLE BUTTON

3. START BUTTON

4. STATUS LED

Part 3 IDENTIFICATION

1 24

DISPLAY LEDSTATUS LED CYCLE BUTTON

START BUTTON

DISPLAY LED

The Display shows the vend price, remaining time, and programming options.

Error codes are also displayed here.

CYCLE BUTTON

Press the cycle button to Select the desired cycle based on laundry types and conditions.

WHITES AND COLORS

Use this cycle to get high heat for heavy fabrics, such as jeans corduroys or work clothes (High heat).

PERMANENT PRESS

Use for drying sturdy fabrics such as work casual clothes (Medium heat).

START BUTTON

The START LED flashes when the full vend price has been satisfied then the cycle has been chosen or the machine is paused. The START LED flashes when a card is inserted to add time to the current cycle.

STATUS LED

• LED flashes whenever the heating cycle is in operation.

• LED flashes whenever the cool down cycle is in operation.

DELICATES

Use for drying synthetic fabrics,washable knit fabrics and no-iron finishes (Low heat).

NO HEAT

Use for items that require heat-free drying such as plastics or rubber.

Part 4 OPERATING YOUR DRYER

Ready mode

Top off (To add more time)

The display LED shows each cycle price and cycle LED toggle.

Insert card/coin

Insert a cash card that has a sufficient balance. The card balance should be more than the programmed vend price for a selected cycle.

Note

When the card balance is not enough, machine displays the balance for 5 seconds and then displays message repetitively

Insert a sufficient amount of change that is a more than the programmed vend price for a selected cycle.

Note

When the coin amount is not enough, the machine will not start.

After a debit card is inserted, the operating time can be increased to 15 minutes/25¢ (default), when the START button or the chosen course button has been pressed. (The card should have enough balance to satisfy increasing time.)

The operating time can be increased to 15 minutes/25¢ (default) by adding more coins.

Note

Owner can control the additional time and money setting (top off price).

When the COOL DOWN has been working, if time is added, it goes back to the DRYING. Time can be added up 99 minutes.

Change cycle

You cannot change the cycle while the machine is running.

But if the door is opened, the machine stops temporarily and the cycle can be changed.

Select the cycle

Press the desired cycle and the start button. The display LED will show the remaining time and the selected cycle starts.

Note

The last 2 minutes of the remaining time are always for the cool down portion.

Cycle finish

After the COOL DOWN of cycle, the machine stops and LED display shows End. If you press any key or open the door, the dryer defaults to the ready mode.

+ 28 hidden pages