global_main.book.book Page 1 Monday, April 20, 2020 3:23 PM
OWNER'S MANUAL
FRIDGE & FREEZER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
Before Calling for Service................................................................................30
WARNING
global_main.book.book Page 3 Monday, April 20, 2020 3:23 PM
SAFETY INSTRUCTIONS
3
EN
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
The following safety guidelines are intended to prevent unforeseen
risks or damage from unsafe or incorrect operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as
described below.
Safety Messages
This symbol is displayed to indicate matters and operations
that can cause risk. Read the part with this symbol carefully
and follow the instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
WARNING
• To reduce the risk of explosion, fire, death, electric shock, injury or
scalding to persons when using this product, follow basic
precautions, including the following:
Technical Safety
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
global_main.book.book Page 4 Monday, April 20, 2020 3:23 PM
4
EN
SAFETY INSTRUCTIONS
responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
• This appliance is intended to be used in household and similar
applications such as:
- staff kitchen areas in shops, offices and other working
environments;
- farm houses and by clients in hotels, motels and other residential
type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications.
•
This symbol alerts you to flammable materials that can
ignite and cause a fire if you do not take care.
• This appliance contains a small amount of isobutane refrigerant
(R600a), but it is also combustible. When transporting and installing
the appliance, care should be taken to ensure that no parts of the
refrigerating circuit are damaged.
• The refrigerant and insulation blowing gas used in the appliance
require special disposal procedures. Consult with service agent or a
similarly qualified person before disposing of them.
• Do not damage the refrigerant circuit.
• If the power cord is damaged or the hole of the outlet socket is loose,
do not use the power cord and contact an authorized service centre.
• Do not locate multiple portable outlet sockets or portable power
supplies at the rear of the appliance.
• Securely plug the power plug in the outlet socket after completely
removing any moisture and dust.
• Never unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the outlet
socket.
• Keep ventilation openings, in the appliance enclosure or in the builtin structure, clear of obstruction.
global_main.book.book Page 5 Monday, April 20, 2020 3:23 PM
SAFETY INSTRUCTIONS
5
EN
• Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
• Do not tilt the appliance to pull or push it when transporting.
• When positioning the appliance, ensure the supply cord is not
trapped or damaged.
• Do not use mechanical devices or other means to accelerate the
defrosting process.
• Do not use a hair drier to dry the inside of the appliance or place a
candle inside to remove the odours.
• Do not use electrical appliances inside the refrigerator.
• Make sure not to get a body part such as a hand or foot stuck while
moving the appliance.
• Disconnect the power cord before cleaning the appliance interior or
exterior.
• Do not spray water or inflammable substances (toothpaste, alcohol,
thinner, benzene, flammable liquid, abrasive, etc.) over the interior or
exterior of the appliance to clean it.
• Do not clean the appliance with brushes, cloths or sponges with
rough surfaces or which are made of metallic material.
• Only qualified service personnel from LG Electronics service centre
should disassemble, repair, or modify the appliance. Contact an LG
Electronics customer information centre if you move and install the
appliance in a different location.
Risk of Fire and Flammable Materials
• If a leak is detected, avoid any naked flames or potential sources of
ignition and air the room in which the appliance is standing for
several minutes. In order to avoid the creation of a flammable gas air
mixture if a leak in the refrigerating circuit occurs, the size of the
room in which the appliance is used should correspond to the
amount of refrigerant used. The room must be 1 m² in size for every
8 g of R600a refrigerant inside the appliance.
• Refrigerant leaking out of the pipes could ignite or cause an
explosion.
global_main.book.book Page 6 Monday, April 20, 2020 3:23 PM
6
EN
SAFETY INSTRUCTIONS
• The amount of refrigerant in your particular appliance is shown on
the identification plate inside the appliance.
Installation
• This appliance should only be transported by two or more people
holding the appliance securely.
• Install the appliance on a firm and level floor.
• Do not install the appliance in a damp and dusty place. Do not install
or store the appliance in any outdoor area, or any area that is subject
to weathering conditions such as direct sunlight, wind, rain, or
temperatures below freezing.
• Do not place the appliance in direct sunlight or expose it to the heat
from heating appliances such as stoves or heaters.
• Be careful not to expose the rear of the appliance when installing.
• Install the appliance in a place where it is easy to unplug the power
plug of the appliance.
• Be careful not to let the appliance door fall during assembly or
disassembly.
• Be careful not to pinch, crush, or damage the power cable during
assembly or disassembly of the appliance door.
• Be careful not to point the power plug up or let the appliance lean
against the power plug.
• Do not connect a plug adapter or other accessories to the power
plug.
• Do not modify or extend the power cable.
• Ensure that the outlet socket is properly grounded, and that the earth
pin on the power cord is not damaged or removed from the power
plug. For more details on grounding, inquire at an LG Electronics
customer information centre.
• This appliance is equipped with a power cord having an equipmentgrounding conductor and a grounding power plug. The power plug
must be plugged into an appropriate outlet socket that is installed
and grounded in accordance with all local codes and ordinances.
global_main.book.book Page 7 Monday, April 20, 2020 3:23 PM
SAFETY INSTRUCTIONS
7
EN
• Never start up an appliance showing any signs of damage. If in doubt,
consult your dealer.
• Dispose of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause
suffocation.
• Do not plug the appliance into a multi socket adapter which does not
have a power cable (mounted).
• The appliance should be connected to a dedicated power line which
is separately fused.
• Do not use a multi socket outlet which is not properly grounded
(portable). In case of using a properly-grounded multi socket outlet
(portable), use the multi socket outlet with the current capacity of the
power cord rating or higher and use the multi socket outlet only for
the appliance.
Operation
• Do not use the appliance for any purpose (storage of medical or
experimental materials or shipping) other than any domestic
household food storage use.
• If water penetrates electrical parts of the appliance, disconnect
power plug and contact an LG Electronics customer information
centre.
• Unplug the power plug during a severe thunderstorm or lightening
or when not in use for a long period of time.
• Do not touch the power plug or the appliance controls with wet
hands.
• Do not bend the power cable excessively or place a heavy object on it.
• Immediately unplug the power plug and contact an LG Electronics
customer information centre if you detect a strange sound, odour, or
smoke coming from the appliance.
• Do not place hands or metallic objects inside the area emitting the
cold air, cover or heat releasing grille on the back.
• Do not apply excessive force or impact to the back cover of the
appliance.
global_main.book.book Page 8 Monday, April 20, 2020 3:23 PM
8
EN
SAFETY INSTRUCTIONS
• Be careful of nearby children when you open or close the appliance
door. The door may bump the child and cause injury.
• Avoid the danger of children getting trapped inside the appliance. A
child trapped inside the appliance can cause suffocation.
• Do not put animals, such as pets into the appliance.
• Do not place heavy or fragile objects, containers filled with liquid,
combustible substances, flammable objects (such as candles, lamps,
etc.), or heating devices (such as stoves, heaters, etc.) on the
appliance.
• Do not place any electronic appliance (such as heater and mobile
phone) inside the appliance.
• If there is a gas leakage (isobutane, propane, natural gas, etc.), do not
touch the appliance or power plug and ventilate the area
immediately. This appliance uses a refrigerant gas (isobutane,
R600a). Although it uses a small amount of the gas, it is still
combustible gas. Gas leakage during appliance transport, installation
or operation can cause fire, explosion or injury if sparks are caused.
• Do not use or store flammable or combustible substances (ether,
benzene, alcohol, chemical, LPG, combustible spray, insecticide, air
freshener, cosmetics, etc.) near the appliance.
• If the appliance is equipped with a lock (some models only), keep the
key out of reach of children.
Disposal
• When discarding the appliance, remove the door gasket while leaving
the shelves and baskets in place and keep children away from the
appliance.
CAUTION
global_main.book.book Page 9 Monday, April 20, 2020 3:23 PM
SAFETY INSTRUCTIONS
9
EN
CAUTION
• To reduce the risk of minor injury to persons, malfunction, or damage
to the product or property when using this product, follow basic
precautions, including the following:
Operation
• Do not touch frozen food or the metal parts in the freezer
compartment with wet or damp hands. It may cause frostbite.
• Do not place glass containers, bottles or cans (especially those
containing carbonated drinks) in the freezer compartment, shelves or
ice bin that will be exposed to temperatures below freezing.
• The tempered glass on the front side of the appliance door or the
shelves can be damaged by an impact. If it is broken, do not touch it
with hands.
• Do not hang from the appliance doors, storage room, shelf or climb
up into it.
• Do not store an excessive amount of water bottles or containers for
side dishes on the door baskets.
• Do not open or close the appliance door with excessive force.
• If the hinge of the appliance door is damaged or operates
improperly, stop using the appliance and contact an authorized
service centre.
• Prevent animals from nibbling on the power cable or water hose.
• Never eat frozen foods immediately after they have been taken out in
the freezer compartment.
• Make sure not to get a hand or foot stuck upon opening or closing the
appliance door or door in door.
Maintenance
• Do not clean glass shelves or covers with warm water when they are
cold. They may shatter if exposed to sudden temperature changes.
global_main.book.book Page 10 Monday, April 20, 2020 3:23 PM
10
EN
SAFETY INSTRUCTIONS
• Do not insert the shelves upside down. The shelves may fall.
• To remove frost from the appliance, contact an LG Electronics
customer information centre.
• Dispose of the ice inside the ice bin in the freezer compartment
during an extended power outage.
NOTE
NOTE
global_main.book.book Page 11 Monday, April 20, 2020 3:23 PM
INSTALLATION
Before Installation
Dimensions and Clearances
Too small of a distance from adjacent items may
result in the degradation of freezing capability and
increased electricity costs. Allow over 50 mm of
clearance between the back of the appliance and
the wall when installing the appliance.
A
DFEG
B
C
-Size (mm)
A700
H
• The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening and
so on.
• The climate class can be found on the rating
label.
Climate ClassAmbient Temperature
SN (Extended
Temperate)
N (Temperate)+16 - +32
ST (Subtropical)+16 - +38 / +18 - +38**
T (Tropical)+10 - +43* / +16 - +43 /
* Australia, India, Kenya
** Argentina, Ecuador
INSTALLATION
Range ºC
+10 - +32
+18 - +43**
11
EN
B1780
C730
D594
E646
F700
G1335
H1225
• You can determine what type of appliance it is by
looking at the label inside the appliance.
Ambient Temperature
• The appliance is designed to operate within a
limited range of ambient temperatures,
depending on the climate zone.
• The appliances rated from SN to T are intended
to be used at an ambient temperature between
10 ºC and 43 ºC.
Levelling the Appliance
Adjusting the Levelling Leg
If the appliance seems unsteady, or the doors do
not close easily, adjust the appliance’s tilt using the
instructions below.
NOTE
global_main.book.book Page 12 Monday, April 20, 2020 3:23 PM
12
EN
1
2
INSTALLATION
Turn the levelling leg clockwise to raise that
side of the appliance or counterclockwise to
lower it.
Open the doors and check to make sure that
they close easily.
4
Move the appliance with more than two people
carefully. When transporting the appliance
over a long distance, keep the appliance
upright.
5
After installing the appliance, connect the
power plug into a mains outlet socket and
switch it on.
Turning on the Power
Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket.
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Moving the Appliance for
Relocation
Preparing for Relocation
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance.
3
Tape parts such as shelves and the door handle
to prevent from falling off while moving the
appliance.
NOTE
NOTE
global_main.book.book Page 13 Monday, April 20, 2020 3:23 PM
OPERATION
Before Use
Notes for Operation
• Users should keep in mind that frost can form if
the door is not closed completely or if the
humidity is high during the summer.
• Ensure there is sufficient space between food
stored on the shelf or door basket to allow the
door to close completely.
• Opening the door for long periods can cause a
significant increase of the temperature in the
compartments of the appliance.
• If the refrigerating appliance is left empty for
long periods, switch off, defrost, clean, dry, and
leave the door open to prevent mould
developing within the appliance.
Door Open Alarm
The alarm sounds 3 times in 30 second intervals if
the door is left open or not completely closed for 1
minute.
• Contact the LG Electronics customer information
centre if the alarm sound continues even after
closing all doors.
OPERATION
the repair technician from the our information
centre may have difficulty finding the problem.
13
EN
Suggestion for Energy Saving
• Ensure there is sufficient space between stored
foods. This allows cold air to be circulated evenly
and lowers electricity bills.
• Store hot food only after it has cooled in order to
prevent dew or frost.
• When storing food in the freezer compartment,
set the freezer temperature lower than the
temperature indicated on the food.
• Do not set the temperature of the appliance
lower than needed.
• Do not put food near the temperature sensor of
the fridge compartment. Keep a distance of at
least 3 cm from the sensor.
• Note that a temperature rise after defrosting has
a permissible range in the appliance
specifications. If you wish to minimise the impact
on the food storage due to a temperature rise,
seal or wrap the stored food in several layers.
• The automatic defrosting system in the
appliance ensures that the compartment
remains free of ice buildup under normal
operating conditions.
Failure Detection
The appliance can automatically detect problems
during the operation.
• If a problem is detected, the appliance may not
operate and an error code is displayed even
when any button is pressed.
• If an error code is indicated on the display, do
not turn off the power. Immediately contact the
LG Electronics customer information centre and
report the error code. If you turn off the power,
Storing Foods Effectively
• Store frozen food or refrigerated food inside
sealed containers.
• Check the expiration date and label (storage
instructions) before storing food in the
appliance.
• Do not store food for a long period of time (more
than 4 weeks) if it spoils easily at a low
temperature.
• Place the refrigerated food or frozen food in
each fridge or freezer compartment
immediately after purchasing.
NOTE
global_main.book.book Page 14 Monday, April 20, 2020 3:23 PM
14
EN
OPERATION
• Store raw meat and fish in suitable containers in
the refrigerator, so that it is not in contact with or
drip onto other food.
• Refrigerated foods and other food items can be
stored on top of the vegetable drawer.
• Avoid refreezing any food which has been
completely thawed. Freezing any food which has
been completely thawed again will lower its taste
and nutrition.
• Cool hot food before storing. If too much hot
food is placed inside, the internal temperature of
the appliance can increase and negatively affect
other foods stored in the appliance.
• Do not overfill the appliance. Cold air can not
circulate properly if the appliance is overfilled.
• If you set an excessively low temperature for
food, it may become frozen. Do not set a
temperature lower than the required
temperature for the food to be stored correctly.
• If there are chill compartments in the appliance,
do not store vegetables and fruits with higher
moisture content in the chill compartments as
they may freeze due to the lower temperature.
• In the event of a blackout, call the electricity
company and ask how long it is going to last.
- You should avoid door openings while the
power is off.
- When the power supply gets back to normal,
check the condition of the food.
Freezing the Maximum Amount
of Food
If large quantities of food are to be stored, the
icemaker should be taken out of the appliance and
the food should be stacked directly on the freezer
shelves in the freezer compartment.
• Insert the icemaker in the right position.
Two Star Compartment
• Two star (a) basket or drawer can be used to
store ice and food from -12 °C to -18 °C for short
periods.
• Two star frozen food compartments are suitable
for storing pre-frozen food, storing or making
icecream and making ice cubes.
• Two star compartments are not suitable for the
freezing of fresh food.
Maximum Freezing Capacity
•
Express Freeze
reach its maximum freezing capacity. This
generally takes up to 24 hours and automatically
switches off.
•
Express Freeze
before fresh products are placed in the freezer
compartment.
• To get better air circulation, insert all inner parts
like baskets and shelves.
function will allow the freezer to
must be switched on for 2 hours
global_main.book.book Page 15 Monday, April 20, 2020 3:23 PM
Product Features
The appearance or components of the appliance may differ from model to model.
Interior (Two Star a)
*1:This feature is only available on some models.
OPERATION
15
EN
a
LED Lamp
The LED lamps inside the appliance light up when you open the door.
b
Freezer Shelf
This is where frozen foods such as meat, fish, and icecream can be stored.
c
Moving Icemaker
This is where ice is manually produced and stored.
• You can slide the icemaker along the shelf from side to side to any desired position.
d
Freezer Temperature Controller
This controller regulates the air flow to the freezer compartment by setting it to a suitable balance.
e
Pull Out Tray/Fresh Room Drawer
This is where food items are stored at a colder temperature than the regular fridge area.
f
Control Panel
This is where you can set the fridge temperature.
g
Door Cooling
This is where cold air comes out to keep the fridge door basket cool.
h
Fridge Shelf
This is where refrigerated foods and other items are stored.
*1
*1
*1
*1
NOTE
global_main.book.book Page 16 Monday, April 20, 2020 3:23 PM
16
EN
i
j
k
• The number of freezer door baskets with two star section may vary depending on model purchased.
l
m
n
o
OPERATION
• Store the foods with higher moisture content at the front of the shelf.
• The shelf height can be adjusted by inserting the shelf in another groove of different height.
Air Filter
This reduces odours inside the fridge compartment.
Fresh Vegetable Drawer
This is where fruits and vegetables are stored to help maintain freshness by adjusting the humidity
controller.
Freezer Door Basket
This is where small packaged frozen food or frequently used foods can be stored.
Water Tank
This is where water is stored to supply the dispenser.
Door in Door Compartment
This is where foods which are taken out frequently such as beverages and snacks are stored.
Fridge Door Basket
This is where small packages of refrigerated foods, drinks and sauce containers are stored.
Automatic Icemaker
This is where ice is automatically produced and stored.
*1
*1
*1
*1
NOTE
global_main.book.book Page 17 Monday, April 20, 2020 3:23 PM
Control Panel
The actual control panel may differ from model to model.
Control Panel and Functions
*1:This control panel is only available on some models.
Control Panel 1: On the Freezer Door*1
Type A
*1
Type B
*1
OPERATION
17
EN
a
Fridge
Press this button repeatedly to select a desired temperature between 0 °C and 6 °C.
• The initial fridge temperature is 3 °C.
• The actual inner temperature varies depending on the food status, as the indicated setting temperature
is a target temperature, not actual temperature within the appliance.
b
Express Freeze
This function can quickly freeze a large amount of ice or frozen foods.
• This function is enabled and disabled in turn each time you press the button.
• This function automatically terminates after a specific period has passed.
c
Hygiene Fresh
This function reduces odours inside the fridge.
d
Wi-Fi
This button allows the appliance to connect to a home Wi-Fi network. Refer to Smart Functions for
information on the initial setup of the
e
Lock
This locks the buttons on the control panel.
*1
LG ThinQ
application.
NOTE
NOTE
global_main.book.book Page 18 Monday, April 20, 2020 3:23 PM
18
EN
• The control panel will turn off automatically for energy saving.
• If any finger or skin comes into contact with the control panel while cleaning it, the button function may
operate.
Control Panel 2: Inside the Fridge*1
OPERATION
• To lock the control panel buttons, press and hold the Lock button for 3 seconds until the k icon
appears and the function is activated.
• To disable the function, press and hold the Lock button for 3 seconds until the
the function is deactivated.
l
icon appears and
a
Fridge
Press this button repeatedly to select a desired temperature between Cold and Coldest.
• The initial fridge temperature is Normal.
Setting the Freezer
Temperature Level (1-8)
The temperature can be adjusted from level 1 to
level 8. Level 3 is recommended.
• You can lower the temperature by turning the
controller to the right and raise the temperature
by turning the controller to the left.
• Setting the controller at level 6 - 8 will maintain a
low temperature in the freezer. When the quick
freezing is finished (level 8), set the controller to
the recommended level.
• Wait until 2 or 3 hours have passed after
connecting the appliance to the outlet before
storing food in the appliance.
• The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening and
so on.
Setting the Freezer
Temperature Level (1-8)
The temperature can be adjusted from level 1 to
3
level 8. Level 5 is recommended.
• You can lower the temperature by turning the
controller to the right and raise the temperature
by turning the controller to the left.
NOTE
CAUTION
NOTE
NOTE
global_main.book.book Page 19 Monday, April 20, 2020 3:23 PM
• Setting the controller at 6-8 level will maintain a
low temperature in the freezer.
• Wait until 2 or 3 hours have passed after
connecting the appliance to the outlet before
storing food in the appliance.
• The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening and
so on.
Water Dispenser
This feature is only available on some models.
OPERATION
• If the cup rim is small, water may splash out of
the glass or miss it completely.
19
EN
Cleaning the Dispenser Tray
Wipe the entire area with a damp cloth. The
dispenser tray may become wet easily due to
spilled water.
Cleaning the Dispenser Outlet
Wipe the dispenser outlet frequently with a clean
cloth as it may get dirty easily.
Using the Dispenser
You can dispense water by pressing the lever.
a
• Press the paddle
cold water.
• Keep children away from the dispenser to
prevent children playing with or damaging the
controls.
of the water dispenser to get
• Lint from a cloth may adhere to the outlet.
Filling the Water Tank
The water tank holds the water which is to be
dispensed.
WARNING
CAUTION
NOTE
global_main.book.book Page 20 Monday, April 20, 2020 3:23 PM
20
EN
1
2
• Fill with potable water only. Do not fill the water
tank with beverages or hot water.
• Children should not be allowed near the water
tank.
OPERATION
Open the cap on the top of the water tank.
Fill the water tank with potable water and close
the cap.
2
Empty the water tank.
3
Hold the water tank with both hands and pull it
up.
4
Remove the water valve a in the water tank by
turning it clockwise.
• Do not apply excessive force or impact when
removing or assembling the water dispenser
tank.
• If water does not come out, fill the water tank
with potable water.
• The water tank should be washed before filling it
with potable water.
• If water does not come out, fill the water tank
with potable water.
Cleaning the Water Tank
1
Remove the water tank cover.
5
Clean the water tank and the water valve in
running water. Wipe the inside and outside of
the water tank and the fridge door with a clean
cloth.
6
Mount the water tank in the reverse order of
the removal process.
Icemaker
This feature is only available on some models.
Using the Moving Icemaker
This is where ice is manually produced and stored.
1
Pull out the ice tray from the Icemaker.
WARNING
CAUTION
NOTE
CAUTION
NOTE
global_main.book.book Page 21 Monday, April 20, 2020 3:23 PM
2
Fill the ice tray with water up to the marked
water line.
3
Hold and push the ice tray back to its original
position.
4
Hold the lever of the ice tray and turn it
clockwise to release the ice cubes.
5
Hold the handle of the ice bin and pull out it.
• Fill with potable water only.
• Be careful not to spill water when pushing the ice
tray.
• Be careful not to twist the ice tray with force as it
can be broken.
• If you open and close the freezer door
frequently, it may take longer for water to be
frozen.
• You can remove the ice maker to create more
space inside the freezer compartment if you do
not use it.
• If the ice tray is overfilled, the ice cubes may stick
together and be difficult to remove.
• Ice can be removed more easily by pouring
water on the ice tray.
OPERATION
21
EN
Automatic Icemaker
Before Using the In-Door
Icemaker
• The first ice and water dispensed may include
particles or odour from the water supply line or
the water tank.
• If discolored ice is dispensed, check the water
tank and the water supply for a possible source.
If the problem continues, contact the LG
Electronics customer information centre. Do not
use the ice or water until the problem is
corrected.
• Do not touch the automatic icemaker with your
hand or a tool.
• Do not remove the cover of the automatic
icemaker.
• Dispose of the ice inside the ice bin if you go on
vacation or if an extended power outage occurs.
• The icemaker produces ice normally when
approximately 48 hours have passed after the
appliance is initially installed.
• If the ice bin is completely filled with ice, ice
production will stop.
• Sound of ice dropping into the ice bin is normal.
• If ice cubes are stored in the ice bin for a long
period of time, they may clump together and
may not be separated easily. In such a case,
empty the ice bin and allow fresh ice to be made.
In-Door Icemaker
The automatic icemaker can automatically make
40-84 cubes at a time, within a 24-hour period if
conditions are favorable. This amount may vary
according to the environment (ambient
temperature around the appliance, frequency of
NOTE
NOTE
global_main.book.book Page 22 Monday, April 20, 2020 3:23 PM
22
EN
OPERATION
the door being opened, amount of food stored in
the appliance, etc.).
a
Power Switch
Turning the Automatic
Icemaker On or Off
1
Remove the upper freezer basket by lifting it
upward.
2
Remove the cover of the automatic icemaker
by lifting it upward.
Normal Sounds You May Hear
The icemaker water valve will buzz as the icemaker
fills with water. If the power switch is in the ON (|)
position, it will buzz even if it has not yet been
hooked up to water. To stop the buzzing, move the
power switch to OFF (O).
• Do not keep the power turned on to the
icemaker if the water line is not connected.
Doing so can damage the icemaker.
Preparing for Vacation
If the ambient temperature will drop below
freezing, have a qualified technician drain the
water supply system to prevent serious property
damage due to flooding caused by ruptured water
lines or connections. Set the icemaker power
switch to OFF (O) and shut off the water supply to
the appliance.
• The ice bin should be emptied any time the
icemaker on/off switch is turned to the OFF (O)
position.
3
To turn the automatic icemaker On/Off, press
the power switch
( | ) or OFF (O) position.
a
on the icemaker to the ON
Door in Door
This feature is only available on some models.
Using the Door in Door
Press the button at the top of the fridge door until
the Door in Door opens.
global_main.book.book Page 23 Monday, April 20, 2020 3:23 PM
There is plenty of storage space inside the Door in
Door and its surrounding baskets, allowing you to
store food in an organized manner.
Removing and Refitting the
Door in Door Case
1
Hold the case inside the Door in Door with both
hands and remove it by lifting it upward.
OPERATION
2
Pull out the Door in Door basket.
3
Mount the Door in Door basket in the reverse
order of the removal process.
23
EN
Fridge Drawer
Using the Fresh Vegetable
Drawer
Vegetable compartment can adjust the humidity by
moving the knob.
2
Mount the Door in Door in the reverse order of
the removal process.
Using the Door in Door Basket
Store food that is frequently taken out and used.
1
Open the Door in Door.
a
For storing fruit.
b
For storing vegetables.
Removing and Refitting the
Fresh Vegetable Drawer
1
Remove the contents of the drawer. Hold the
handle of the vegetable drawer and gently pull
it out outward until the drawer stops
completely.
CAUTION
global_main.book.book Page 24 Monday, April 20, 2020 3:23 PM
24
EN
2
OPERATION
Lift the vegetable drawer up and remove it by
pulling it out.
Shelf
Removing/Refitting the Shelf
1
Hold the both side of the shelf. Lift the shelf up
and remove it by pulling it out.
3
Mount the vegetable drawer in the reverse
order of the removal process.
• Remove all food from inside the appliance,
otherwise injuries can be caused by the weight
of stored foods.
2
Refit the shelf by sliding it inward until the shelf
snaps into the frame.
Door Basket
Removing/Refitting the Door
Basket
1
Hold both edges of the basket and remove it by
lifting it upward.
2
Refit the door basket in the reverse order of the
removal process.
NOTE
NOTE
global_main.book.book Page 25 Monday, April 20, 2020 3:23 PM
SMART FUNCTIONS
LG ThinQ Application
This feature is only available on models with Wi-Fi.
LG ThinQ
The
communicate with the appliance using a
smartphone.
LG ThinQ Application Features
Communicate with the appliance from a
smartphone using the convenient smart features.
Smart Diagnosis
• If you experience a problem while using the
appliance, this smart diagnosis feature will help
you diagnose the problem.
Settings
• Allows you to set various options on the
appliance and in the application.
• If you change your wireless router, internet
service provider, or password, delete the
registered appliance from the
application and register it again.
• The application is subject to change for
appliance improvement purposes without notice
to users.
• Functions may vary by model.
Before Using LG ThinQ
Application
1
Check the distance between the appliance and
the wireless router (Wi-Fi network).
• If the distance between the appliance and
application allows you to
LG ThinQ
the wireless router is too far, the signal
strength becomes weak. It may take a long
time to register or installation may fail.
SMART FUNCTIONS
2
Turn off the
your smartphone.
3
Connect your smartphone to the wireless
router.
• To verify the Wi-Fi connection, check that f icon
on the control panel is lit.
• The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact
your Internet service provider or refer to your
wireless router manual.
•
LG ThinQ
connection problems or any faults,
malfunctions, or errors caused by network
connection.
• If the appliance is having trouble connecting to
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
• The Wi-Fi connection may not connect or may be
interrupted because of the home network
environment.
• The network connection may not work properly
depending on the Internet service provider.
• The surrounding wireless environment can
make the wireless network service run slowly.
• The appliance cannot be registered due to
problems with the wireless signal transmission.
Unplug the appliance and wait about a minute
before trying again.
Mobile data
is not responsible for any network
or
Cellular Data
25
EN
on
NOTE
NOTE
global_main.book.book Page 26 Monday, April 20, 2020 3:23 PM
26
EN
SMART FUNCTIONS
• If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
• The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
• If the security protocol of the router is set to
WEP
, you may fail to set up the network. Please
change it to other security protocols (
recommended) and register the product again.
WPA2
is
Installing the LG ThinQ
Application
Search for the
Google Play Store or Apple App Store on a
smartphone. Follow instructions to download and
install the application.
LG ThinQ
application from the
Connecting to Wi-Fi
The
Wi-Fi
button, when used with the
application, allows the appliance to connect to a
f
home Wi-Fi network. The
of the appliance’s network connection. The icon
illuminates when the appliance is connected to the
Wi-Fi network.
•
Initial Appliance Registration
Run the
instructions in the application to register the
appliance.
•
Re-registering the Appliance or Registering
Another User
Press and hold the
temporarily turn it off. Run the
application and follow the instructions in the
application to register the appliance.
LG ThinQ
icon shows the status
application and follow the
Wi-Fi
button for 3 seconds to
LG ThinQ
LG ThinQ
• To disable the Wi-Fi function, press and hold the
Wi-Fi
button for 3 seconds. The f icon will be
turned off.
Wireless LAN Module
Specifications
ModelLCW-004
Frequency Range2412 - 2472 MHz
Output Power
(Max.)
This device should be installed and operated with a
minimum distance of 20 cm between the device
and the body.
IEEE 802.11 b: 17.82 dBm
IEEE 802.11 g: 17.72 dBm
IEEE 802.11 n: 16.61 dBm
Declaration of Conformity
The LG Electronics declares that the type of radio
equipment Refrigerator corresponds to the
Technical regulations of radio equipment;
The full text of the Declaration of Conformity is
available on the website at the following address:
https://www.lg.com/global/support/cedoc/cedoc.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request
NOTE
global_main.book.book Page 27 Monday, April 20, 2020 3:23 PM
to opensource@lge.com. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
Smart Diagnosis
This feature is only available on models with the c
d
logo.
or
Use this feature to help you diagnose and solve
problems with your appliance.
• For reasons not attributable to LGE’s negligence,
the service may not operate due to external
factors such as, but not limited to, Wi-Fi
unavailability, Wi-Fi disconnection, local app
store policy, or app unavailability.
• The feature may be subject to change without
prior notice and may have a different form
depending on where you are located.
SMART FUNCTIONS
Control Panel 1: On the Freezer Door*1
1
Press the
function.
• If the display has been locked for over 5
2
Press and hold the
or longer.
• The control panel will be turned off, and then
3
Open both fridge and freezer door, and then
hold the phone on the upper right speaker
hole.
• Position the phone so that its microphone is
Lock
button to activate the lock
minutes, you must deactivate the lock and
then reactivate it.
Fridge
button for 3 seconds
3
will be displayed on the control panel.
aligned with the speaker hole.
27
EN
Using LG ThinQ to Diagnose
Issues
If you experience a problem with your Wi-Fi
equipped appliance, it can transmit
troubleshooting data to a smartphone using the
LG ThinQ
• Launch the
application.
LG ThinQ
Smart Diagnosis
the instructions provided in the
application.
application and select the
feature in the menu. Follow
LG ThinQ
Using Audible Diagnosis to
Diagnose Issues
*1:This control panel is only available on some
models.
Follow the instructions below to use the audible
diagnosis method.
• Launch the
Smart Diagnosis
the instructions for audible diagnosis provided
in the
LG ThinQ
LG ThinQ
application and select the
feature in the menu. Follow
application.
4
After the data transfer is complete, the
diagnosis will be displayed in the application.
Control Panel 2: Inside the Fridge*1
1
Open the freezer door and close the fridge
door.
2
Close and open the freezer door 5 times in 8
seconds until the LED lamp blinks.
3
Hold the phone on the upper right speaker
hole until the data transfer is complete.
• Position the phone so that its microphone is
aligned with the speaker hole.
NOTE
global_main.book.book Page 28 Monday, April 20, 2020 3:23 PM
28
EN
4
• For best results, do not move the phone while
the tones are being transmitted.
SMART FUNCTIONS
• The diagnosis sound is generated after
around 3 seconds.
After the data transfer is complete, the
diagnosis will be displayed in the application.
global_main.book.book Page 29 Monday, April 20, 2020 3:23 PM
MAINTENANCE
Cleaning
General Cleaning Tips
• When cleaning the inside or outside of the
appliance, do not wipe it with a rough brush,
toothpaste, or flammable materials. Do not use
cleaning agents containing flammable
substances. This may cause discolouration or
damage to the appliance.
• After cleaning, check if the power cable is
damaged.
Cleaning the Exterior
• When cleaning the outside air vents of the
appliance by means of vacuuming, then the
power cord should be unplugged from the outlet
to avoid any static discharge that can damage
the electronics or cause an electric shock.
Regular cleaning of the rear and side ventilation
covers is recommended to maintain reliable and
economical operation of the unit.
• Keep the air vents on the exterior of the
appliance clean. Blocked air vents can cause fire
or appliance damage.
• For the appliance exterior, use a clean sponge or
soft cloth and a mild detergent in warm water.
Do not use abrasive or harsh cleaners. Dry
thoroughly with a soft cloth. Do not use
contaminated cloths when cleaning the stainless
steel doors. Always use a dedicated cloth and
wipe in the same direction as the grain. This
helps reduce surface staining and tarnishing.
MAINTENANCE
the appliance. Otherwise, injury may occur due
to the weight of stored foods.
• Detach the shelves and drawers and clean them
with water, and then dry them sufficiently,
before replacing them.
• Regularly wipe the door gaskets with a wet soft
towel.
• Door basket spills and stains should be cleaned
as they can compromise storage ability of the
basket and could even be damaged.
• Never clean the shelves or containers in the
dishwasher. The parts may become deformed
due to the heat.
29
EN
Cleaning the Interior
• When removing a shelf or drawer from inside
the appliance, remove all stored foods from the
shelf or drawer to prevent injury or damage to
global_main.book.book Page 30 Monday, April 20, 2020 3:23 PM
30
EN
TROUBLESHOOTING
TROUBLESHOOTING
Before Calling for Service
Cooling
SymptomsPossible Cause & Solution
There is no
refrigeration or
freezing.
There is poor
refrigeration or
freezing.
The appliance contains
a bad smell.
Is there a power interruption?
• Check the power of other appliances.
Check the power of other appliances.
• Plug the power plug in the outlet properly.
Is the fridge or freezer temperature set to its warmest setting?
• Set the fridge or freezer temperature to a colder setting.
Is the appliance in direct sunlight, or is it near a heat generating object
such as cooking oven or heater?
• Check the installation area and reinstall it away from heat generating
objects.
Did you store hot food without cooling it first?
• Cool the hot food first before putting it in the fridge or freezer
compartment.
Did you put in too much food?
• Maintain an appropriate space between food.
Are the appliance doors completely closed?
• Completely close the door and make sure that stored food is not
obstructing in the door.
Is there enough space around the appliance?
• Adjust the installation position to make enough space around the
appliance.
Is the fridge or freezer temperature set to 'Warm'?
• Set the fridge or freezer temperature to a colder setting.
Did you put in food with a strong smell?
• Store foods with strong smells in a sealed containers.
Vegetables or fruit may have spoiled in the drawer?
• Throw away rotten vegetables and clean the vegetable drawer. Do not
store vegetables too long in the vegetable drawer.
global_main.book.book Page 31 Monday, April 20, 2020 3:23 PM
Condensation & Frost
SymptomsPossible Cause & Solution
There is condensation
inside the appliance or
on the bottom of the
vegetable drawer
cover.
Did you store hot food without cooling it first?
• Cool the hot food first before putting it inside the fridge or freezer.
Did you leave the appliance door open?
• Although the condensation will disappear soon after you close the
appliance door, you can wipe it with a dry cloth.
Do you open and close the appliance door too frequently?
• Condensation can form due to the temperature difference from the
outside. Wipe out the dampness with a dry cloth.
Did you put warm or moist food inside without sealing it in a container?
• Store food in a covered or sealed container.
Parts & Features
SymptomsPossible Cause & Solution
The inside lamp in the
appliance does not
turn on.
Lamp failure
• Close the door and re-open. If the lamp does not turn on, please contact
the LG Electronics customer information centre. Do not attempt removal
of the lamp.
TROUBLESHOOTING
31
EN
Noises
SymptomsPossible Cause & Solution
The appliance is noisy
and generates
abnormal sounds.
Is the appliance installed on a weak floor or improperly levelled?
• Install the appliance on a solid and flat area.
Does the rear of the appliance touch the wall?
• Adjust the installation position to allow enough clearance around the
appliance.
Are objects scattered behind the appliance?
• Remove the scattered objects from behind the appliance.
Is there an object on top of the appliance?
• Remove the object on top of the appliance.
global_main.book.book Page 32 Monday, April 20, 2020 3:23 PM
32
EN
TROUBLESHOOTING
Wi-Fi
SymptomsPossible Cause & Solution
Your home appliance
and smartphone are
not connected to the
Wi-Fi network.
The password for the Wi-Fi that you are trying to connect to is incorrect.
• Find the Wi-Fi network connected to your smartphone and remove it, then
register your appliance on
Mobile data for your smartphone is turned on.
• Turn off the
using the Wi-Fi network.
The wireless network name (SSID) is set incorrectly.
• The wireless network name (SSID) should be a combination of English
letters and numbers. (Do not use special characters.)
The router frequency is not 2.4 GHz.
• Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4
GHz and connect the appliance to the wireless router. To check the router
frequency, check with your Internet service provider or the router
manufacturer.
The distance between the appliance and the router is too far.
• If the distance between the appliance and the router is too far, the signal
may be weak and the connection may not be configured correctly. Move
the location of the router so that it is closer to the appliance.
Mobile data
LG ThinQ
of your smartphone and register the appliance
.
global_main.book.book Page 33 Monday, April 20, 2020 3:23 PM
Memo
global_main.book.book Page 36 Monday, April 20, 2020 3:23 PM
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.