LG GCC-4120B Service Manual

BZ03

E

N

H

A

N

C

E

D

English

Deutsch

Français

Italiano

Español

Questo manuale include il tagliando di
garanzia. (pagina n. I-14)

GCC-4120B

CAUTION : The laser used in the CD-RW/DVD-ROM drive can damage your eyes.

Do not attempt to open the cover.
To reduce the risk of electric shock, do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.

Use of controls or performance of procedures other than those specified
here in may result in hazardous radiation exposure.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance

to rain or moisture

English

Industry Canada requirement

This class B digital apparatus meets all requirements of the Canadian Interference­Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.

FCC COMPLIANCE STATEMENT

Note : This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or televi­sion reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

- Consult the dealer or an Authorized Service Center for help.

• FCC WARNING
Changes or modifications not expressly approved by the party responsible for com­pliance could void the user’s authority to operate the equipment.

• This CD-RW/DVD-ROM Drive is for use only with UL listed personal computers that
have installation instructions detailing user installation of card cage accessories.

i

This product is manufactured to comply with the radio interference requirements
of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.

CAUTION - INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM.

VARNING-OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD STRÄLEN
ÄR FARLIG.

CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT

CLASS 1 LASER PRODUKT
V ARNING-NÄR APPARATEN ÖPPNAS KAN MAN UTSÄTTAS FÖR BÅDE SYNLIG

OCH OSYNLIG LASER STRÅLNING.UNDVIK ATT SE DIREKT MOT LASERSTRÅLEN
OCH UNDVIK ATT BETRAKTA STRÅLEN MED OPTISKA INSTRUMENT.

Laser → sträldata
Väglängd → 780nm/650nm
Uteffekt → 4.3mW/5mW
Pulstle → Continuous

This unit uses CD-ROM discs with the following mark

When you use this unit as a CD player, use compact
discs with the following mark

This unit uses CD-R discs with the following mark.

Recordable

This unit uses CD-RW discs with the following mark.

ReWritable

This unit uses High Speed CD-RW discs with the following mark.

ReWritable

WARNING: Only drivers bearing the logo “Compact Disc ReWritable High Speed” can

write or erase High Speed CD-RW media.
High Speed CD-RW Media may be recognized by the same “Compact Disc ReWritable

High Speed” logo on the disc label or packaging material, or by the fact that it lists recording
speeds of “4X to 10X, or “Up to 10X”

Attempted writes to High Speed CD-RW media using CD-RW drives NOT bearing the
logo “Compact Disc ReWritable High Speed” may result in data loss.

ii

High Speed

DirectCD

TM

v2.5b(s)

Contents

Introduction

Installation

Operation

Appendix

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . 3

System Environment . . . . . . . . . . . . . . . . . . . . . . . . . 4

Location and Function of Controls . . . . . . . . . . . . . . 5

Installing the Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Device Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

How to Use the Discs. . . . . . . . . . . . . . . . . . . . . . . . 12

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

■ PC DOS is a trademark of IBM Inc.

■ Roxio and the Roxio logo are trademarks of the Roxio

Corporation.

®

■ MS-DOS, Windows, and Windows
registered in the United States and other countries by the
Microsoft Corporation.

■ The company names and product names written in this
manual are trademarks or registered trademarks of the
respective companies.

1

95 are trademarks

DirectCD

TM

v2.5b(s)

Introduction

Thank you for

purchasing this

CD-RW/DVD-

ROM Drive.

Features

• Enhanced-IDE (ATAPI) interface.

• Power tray loading and ejection of disc.(The disc can also be

ejected manually.)

• Combination CD-R/RW and DVD-ROM Drive functions into one
drive.

• Supports UDF for easy writing to CD-RW discs.

• Supports Region playback control Phase II.

• Supports Windows 95, 98, 2000, ME, & XP/NT4.0.

• Automatic buffer underrun error prevention technology-“ExacLink”

• 12X Writing (CD-R), 8X Writing (CD-RW), 8X Reading (DVD-ROM),

and 32X max Reading (CD-R/RW, CD-ROM)*.

* Writing speed depends on capabilities of discs.

As a result, for high speed write/rewrite, you should use media
labelled High Speed ReWritable discs

Package

Items

Item Quantity

- Internal CD-RW/DVD-ROM Drive 1

- CD Recording Software 1

- E-IDE (ATAPI) cable 1

- Audio Cable 1

- Mounting Screws 4

- Manual for CD-RW/DVD-ROM Drive 1

- Manual for CD Recording Software 1

2

DirectCD

TM

v2.5b(s)

Important Precautions

Follow these precautions when handling the drive or discs.

Precautions

Installation

Operation

• Please take notice that the manufacturer of this equipment does
not offer any warranty against data loss due to inappropriate
installation or handling, or direct or indirect damages.

• Please take notice that the manufacturer will bear no responsibility
for direct or indirect damages caused by the use of this product or
its malfunction.

• Please take notice that the manufacturer will bear no responsibility
for damage to data caused by this product.

• Please backup (copy) all important data as protection against
data loss.

• Avoid placing the drive in a location subject to:

- high humidity

- high temperature

- excessive dust

- mechanical vibration

- direct sunlight

We recommend using the drive in a horizontal or vertical position.
Do not use it in tilted position.

• Don’t move the drive suddenly from a cold place to a wa rm one or
raise the room temperature suddenly. Condensation may occur,
causing abnormal operation.

• Make sure to remove the disc before moving the drive. The disc
may be damaged, causing data loss.

• Be careful to prevent foreign objects, such as liquids or metal,
from entering the drive. In case a foreign object enters the drive,
please consult the dealer where the drive was purchased.

• Don’t interrupt the electric power while the drive is operating.

• When connecting two IDE devices to the Primary or Secondary

connectors, make sure that the two devices are not configured as
both Master, or both Slav e .If they are both set the same, Windo ws
may fail to run or recognize the drives.

• The total length of the IDE cable should be no more than 18 inches
(about 45 cm).

3