P/NO.3828JS8030C
MODEL:GC-339NGLS
REFRIGERATOR
OPERATION MANUAL
PLEASEREADTHEMANUALCAREFULLY BEFOREUSINGTHEREFRIGERATOR. AFTERREADINGTHEMAUNAL,PLEASE KEEPITFOR REFERENCE WHEN NECESSARY.
CONTENTS |
|
FEATURE CHART............................................................................ |
1 |
HANDLING THE UNIT...................................................................... |
2 |
INSTALLATION ............................................................................... |
3 |
IMPORTANT WARNINGS ............................................................ |
4-5 |
OPERATION.................................................................................. |
6-8 |
STORING FOOD.......................................................................... |
9-10 |
OPERATION/DISASSEMBLING/REPLACEMENT OF |
|
REFRIGERATOR ACCESSORIES ............................................... |
11 |
CLEANING .................................................................................... |
12 |
TROUBLESHOOTING................................................................... |
13 |
NOT A PROBLEM .......................................................................... |
14 |
ACCESSORIES ............................................................................. |
15 |
FEATURE CHART
Refrigerator
Compartment
Lamp
Fresh Air Fan
Refrigerator
Compartment Shelf
Deodorizer
Double Pull Tilted
Fresh Drawer
Intelligent Dynamic
Cooling Room Drawer
Small Drawer
Ice Maker
Ice Cube Box
Freezer Drawer
Leveling Screw
Multi Function Rack
Slide Door Rack
Bottle Guide
Lower Cover
The Lower Cover is in Refrigerator Compartment before shipment Installing and operating
the refrigerator according to the graphic representation.
Note: This chart is only for your reference, it may vary with the fact product.
1
HANDLING THE UNIT
● Before transport the product
1.Remove all food in the refrigerator, securely fasten down all loose and fragile items inside the refrigerator with a gummed tape.
2.Tighten the leveling screws toward
● When transporting
1.Firmly hold the leveling screws at the bottom of the refrigerator and the upper handle at the back of the refrigerator.
2.Do not tilt refrigerator when transporting. 3.The refrigerator must stand in the vehicle when transporting it. (Otherwise, it may cause a malfunction.)
Leveling Screw
Note: Please tighten the leveling screws towar when transporting. It may cause floor scratching, or you can’t move the leveling screws.
IMPORTANT WARNINGS
ACCESSIBILITY OF SUPPLY PLUG
The refrigerator-freezer should be so positioned that the supply plug is accessible for quick Disconnection when accident happens.
SUPPLY CORD REPLACEMENT
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
2
INSTALLATION
●Refrigerator should be installed in a weak or uneven place.
-Unstable installation may cause vibration and noise.
-Make the refrigerator level by rotating the height adjusting screws if necessary.
-The refrigerator door can be closed easily when the front side of the refrigerator is higher than the back side.
-Carpet or floorcloth on which a refrigerator is installed may be discolored by heat from the bottom of the refrigerator. So, it is necessary to place a thick pad below the refrigerator.
Front side higher than other parts
Leveling Screw
● Keep a proper distance from other things
-Too small a distance from adjacent items may result in lowered freezing capability and increased electricity charges consumption
larger than 30cm (from ceiling)
Keep a proper distance
Larger than 5cm (from back wall)
Larger than 2cm (from left and right)
● Avoid moisture
-Avoid placing the unit near moisture or any place that is easily splashed by water.
-A wet or near-water place, refrigerator may be rusted or electricity may be leaking.
●Avoid placing the unit near heat or coal gas.
-Too high ambient temperature may result in lowered freezing capability and increased electricity charges consumption.
-Coal gas and smoke may discolor the appearance of refrigerator.
Moisture
Bottom Pad
3
IMPORTANT WARNINGS
Warning: To avoid the following operations in different environment.
•Connect the refrigerator to its own individual electrical outlet.
-Don’t double up with other appliances on the same outlet, it will cause fire due to heat generation.
Use individual electrical outlet
•Keep a clearance between the refrigerator and the outlet.
-The outlet may be extruded from the refrigerator and damaged, causing fire and electrical shock.
•Unplug the power supply plug when cleaning. Do not unplug it with wet hands.
- Otherwise, it may cause electrical shock.
•Do not store inflammable materials such as aether, benzene, alcohol and dry gas in the refrigerator.
- It may cause explosion.
•Unplug the power cord from the outlet before lamp replacement.
Never unplug your refrigerator by pulling on the power cord.
-To avoid electrical shock, do not replace the lamp before the power is off.
-The power cord may be broken when pulling the power cord to unplug it from the outlet.
•Do not place heavy object on the refrigerator.
-They may fall down and cause injury when opening the door.
• Do not touch frozen surfaces with wet hands.
- It could cause frostbite due to low temperature.
•Do not play with the body against the door.
-The fingers may be clamped and injured due to the refrigerator falling down. Especially, be careful for children!
•Do not store medicine and academic materials in the refrigerator.
-Do not store the materials with strict temperature control in the refrigerator.
They may be spoiled or reacted unexpectedly.
aether |
|
|
|
|
alcohol |
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
|
|
benzene |
4
IMPORTANT WARNINGS
• Keep far away from open flame.
- Otherwise, it may cause fire.
•Do not place the liquid container such as vase, cup, cosmetic and medicine
above the refrigerator.
-Water splashing may reduce insulation and cause electric shock and fire. Or it may constitute a risk of injury
to person due to the container falling down.
•When coal gas leaks, do not touch the refrigerator and the power outlet, turn off the gas and open a window
for ventilation.
-Otherwise, it may generate spark and cause explosion, resulting
the risk of fire and burn.
• Do not store bottles in the freezer compartment.
- They may break when frozen
•Avoid placing the unit near moisture or any place that is easily splashed by
water.
-A wet or near-water place, refrigerator may be rusted or electricity may be leaking.
•Firmly hold the leveling screw at the bottom of the refrigerator and the upper handle at the back of the refrigerator when carrying the
refrigerator.
- Otherwise, the refrigerator may fall down.
• Unplug the power plug when not using it for a long time.
-Otherwise, insulation will decrease and may cause electrical shock and fire.
• Insert the power plug five minutes after unplugging it from the outlet.
-Otherwise, the compressor will overload and may cause a malfunction.
5
OPERATION
Use the function keys on the display panel in the front of the refrigerator.
Power On: Turn on the power supply, all indicators light 5 seconds and the buzzer sounds once.
(“ ” display as “
”)
Initial Status: Displays the current time Вечер 12:00, informs user to calibrate time, please press
to adjust time.
Freezer Compartment Temperature -21 Dynamic Cooling Room Temperature 4
Refrigerator compartment 4
If the duration of the refrigerator’s power cut exceeds 2 days, the initial settings will be displayed when the refrigerator is powered on again (except for “ ” and “ ”).
The refrigerator is equipped with “Fuzzy” function. When you use this function, “FUZZY” indicator lamp always lights on.
The following operation instructions are used
for setting different functions (if the interval time exceeds 10 seconds). If the interval time is less
than 10 seconds, the refrigerator will regard it
as continuous operation. You should press to confirm when finishing the operation.
Then the settings can be taken into effect,
otherwise the settings will resume to the original status.The time for each key operation should
be 0.5 second, the interval time between two
operations should exceed 1 second, otherwise the key operations will not take effect.)
1. Setting the Time:
Presskey to display “Hour” LED, you can change
the time for “Hour” by pressingand
keys; Press
key once again, change the time for “Minute”
by using the same operations -> (The time is for reference only)
2. Setting the Temperature:
function is OFF):
Presskey to display “Refrigerator Compartment Temperature” LED, you can adjust the temperature between 2~8
by pressing
and
keys, then press
key to complete the temperature setup.
•Dynamic Cooling Compartment Temperature Setup (The temperature will be fixed at -7and not be adjusted when refrigerator function is off):
Presskey 2 times to display “Dynamic Cooling Compartment Temperature” LED, you can
change the temperature in this compartment to 4, 2
, 0
, -2
, -4
, -7
by using the same operations which used for adjusting the refrigerator compartment’s temperature.
•Freezer Compartment Temperature Setup (not available when using the Super function):
Presskey 3 times to display “Freezer Compartment Temperature” LED, you can set the
temperature between -17~ -24
by using the same operations which used for adjusting the refrigerator compartment’s temperature.
3.Other Settings:
•Alarm:
Enable Alarm: Before enable Alarm, presskey, then
and “Hour” LEDs will blink. Press
or
to adjust the time for Hour ->
-> “Minute” LED blinks, press
or
to adjust the time for Minute, then press
to complete the Alarm setup.
6
OPERATION
When Alarm enabled, please pressuntil
blinks, and press
to cancel Alarm. Press
again until
and time LEDs blink, then set Alarm time again.
Cancel Alarm: When Alarm enabled, press key ->
, the Alarm is canceled.
•Refrigerator Compartment Stop Function:
Set Refrigerator Compartment Stop: When refrigerator compartment stop is not enabled, press
2 times,
blinks, “Refrigerator Compartment Temperature” LED light is off. Press
to complete the setup of refrigerator compartment stop and
lights.
Cancel Refrigerator Compartment Stop: When the refrigerator compartment stop is enabled,
press 2 times, “Refrigerator Compartment Temperature” LED light is on and
blinks ->
->
light is off.
•Super Freezing:
Super Freezing Setting: When the super freezing is not enabled, press 3 times,
blinks,then press or
to adjust the time for super freezing (1/2/3 hours), press
to complete the setup. (In such case, you can’t adjust the freezer compartment’s temperature)
Cancel the Super Freezing: When the super freezing is enabled, press |
3 times, |
||
blinks, “Freezer Compartment Temperature” LED lights on, |
blinks -> |
-> |
lights off. |
Starting
•Please clean inside the refrigerator before operation.
•When your refrigerator is first installed, allow 3 hours to stabilize at normal operating temperatures prior to filling it with fresh or frozen food.
•Make sure that there is about 5-8 mm clearance above the temperature sensors in the refrigerator compartment and freezer compartment to.
Note: Do not put hot food near the temperature sensors, it may lead to high electric bills.
* When the power is off |
Before the power is off: |
|
• Store more ice cubes in the freezer compartment. |
|
• Don’t store any other food. |
|
• Avoid frequent door openings. |
Note:
-If the temperature of freezer compartment raises due to the power failure, the storing period of the food will be shorten and quality of the food will decrease.
-If power failure will not be solved in a short time, please remove the condensed water and ice cubes at the bottom of the freezer drawer, otherwise the ice cubes and food will be frozen together.
-If you put much food in the refrigerator at a time, please set the lowest temperature for each compartment and select rapid freezing mode for the longest time, then the temperature will reach a lower value in the shortest time.
7
DEFROSTING
Water in food and air will frost on the inside wall and the surface of shelf evaporator when the refrigerator is operating in cooling mode. The frost with certain thickness will affect the cooling effect, so it is necessary to regularly defrost your refrigerator in order to ensure efficient operation. Generally, the frost must be removed
immediately when it exceeds 5mm. |
Drainage pipe |
|
• Refrigerator Compartment Defrosting takes place automatically in the refrigerator through controlling the compressor on/off. The defrosted water on inside wall flows through the drainage hole above vegetable drawer to the evaporating tray which is located in the lower back side the refrigerator and is evaporated automatically.
Note:
-Keep the drainage hole clean so that the defrosted water flows down to the evaporating tray smoothly. Once jammed, you can remove the pin in the drainage hole and clean it.
Then put it back.
•Intelligent Dynamic Cooling Room When the temperature in the dynamic cooling room is set
lower than 0, it is normal that frost and ice appears around the cooling room; When the temperature is set higher than 0
, the frost will gradually melt.
• Freezer compartment Manual defrost freezer
Before defrosting - unplug the power plug, open the door and take out the food and drawers in the freezer, you can store the food in the refrigerator temporarily.
Defrosting – Use the defrosting board to scrape off the frost on the inside wall of the freezer and on the surface of the shelf evaporator. Wipe the defrosted water with a cloth and then dry.
After defrosting – turn on the power supply.
Ice making
1. Fill the ice tray with water and place it on the ice cube box.
2. To remove ice cubes, hold the knob of the tray and turn gently.
Then, ice cubes drop in the ice cube box.
To remove ice cubes easily, dunk the ice tray for a while.
8