1.Remove all the food from the refrigerator,
secure the spare parts such as the shelves
by adhesive tape.
2.Fasten the adjustable foot to the direction.
Adjustable Foot
Note:Please fasten the adjustable foot to the direction before transportation, otherwise the oor
will be scraped or the foot will be blocked from moving.
● DURING TRANSPORTATION
1. Hold tightly the adjustable foot at the
bottom of the refrigerator and the
upper handle at the back.
2. During transportation, please note
that the refrigerator should not be
tilted.
3. When transporting to a more distant
place, the refrigerator should be
placed vertically on the vehicle.
(Otherwise problem will exist)
Earth connection
Note: 1.The earth wire of this electrical appliance has been connected to the power plug ,please do
not change the power plug on your own.
2.Plug your refrigerator into a standard 220V household outlet,make sure the socket is
properly earthed.
3.If you receive an electrical shock by touching any part of the refrigerator,you should stop
using the refrigerator immediately and contact the specied maintenance service unit or
the retail shop of this product at once.
ACCESSIBLITY OF SUPPLY PLUG
The refrigerator-freezer should be positioned that the supply plug is accessible for quick
disconnection when accident happens.
POWER CORD REPLACEMENT
If the supply cord is damaged,it must be replaced by a special cord or assembly from the
manufacturer or its service agent.
3
Installation
Installing on a firm and flat surface
- Unstable installation is the main reason
of vibration and noise.
- When the refrigerator is installed unstably,
it can be stabilized by adjusting the
adjustable foot.
- Slightly rising the front part of the
refrigerator allow you to close the door
very easily.
- When installed on a carpet or oor,please put
a rm mat under the refrigerator otherwise
the bottom part will change colour.
Slightly rise
the front part
Adjustable Foot
Installing in a less humid environment
- Do not install the refrigerator in a humid place
or where water can easily be splashed.
- If the refrigerator is installed in a humid
environment,it will go moldy.This will lower
insulation property and cause electricity leakage
Keep an appropriate distance between
the wall
- To ensure proper air circulation around the fridgefreezer, please maintain sufficient space on both
the sides as well As top and maintain at least 2
inches (5 cm) from the rear wall.
- A smaller gap will restrict the operation of the
refrigerator,which may result in an increase in
power.
Keep distance
More than
5cm rear
Avoid installing near heat and gas
- High temperature will lower the refrigeration
and increase the power consumption.
- Installing near gas or smoke will change the
surface colour of the refrigerator.
mat
Humidity
4
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.