LG GB106, MMBB0332301 User Manual

Alphanumeric keys

These keys are used

to dial a number in standby mode and

to enter numbers

or characters in edit

mode.

Earpiece

Soft keys

Each of these keys performs the functions indicated by the text on the display immediately above them

: End /Power key

Allows you to power the phone on or off, end calls, or return to Standby Mode.

Display screen

: Navigation key

Use for quick access to phone functions.

: SEND key

You can dial a phone

number and answer

incoming calls.

GB106 USER GUIDE

This manual may differ from the phone depending on the phone software version and service provider used.

P/N: MMBB0332301 (1.2)

Display Information

Icon area

Text and graphic area

Soft key indications

On-Screen Icons

The table below describes various display indicators or icons that appear on the phone’s display screen.

Tells you the strength of the network signal. Call is connected. Shows that you are using a roaming service. The alarm has been set and is on. Tells you the status of the battery. You have received a text message. You have received a voice message. Vibrate only menu in proﬁle. General menu in proﬁle. Outdoor menu in proﬁle. Silent menu in proﬁle. Headset menu in proﬁle. You can view your schedule.

Turning Your Phone On and Off

1. Hold down the E [END] key until the phone switches on.

2. To switch the phone off, hold down the

E [END] key until the power-off image displays.

Making a call

1. Enter a phone number including the area code.

2. Press the

S [SEND] key to call the number.

3. When ﬁnished, press the

E [END] key.

Answering a call

1. When the phone rings and the phone icon ﬂashes on the screen, press the S [SEND] key

or the left soft key to answer.

2. If the Any Key menu option (Menu 5.5.2.1), has been set, any key press will answer a call

except for the

E [END] key or the right soft key.

3. End the call by pressing the

E [END] key.

Note: After the call ends, the phone will go back to standby mode.

Making an international call

1. Press and hold the 0 key for the international preﬁx. The ‘+’ character automatically

selects the international access code.

2. Enter the country code, area code, and the phone number.

3. Press

S [SEND] key to call the number.

Entering Text

You can enter alphanumeric characters by using the phone’s keypad. To change modes, press the # key.

T9 Mode

This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional ABC mode.

ABC Mode

This mode allows you to enter letters by pressing the key labeled with the required letter once, twice, three or four times until the letter is displayed.

123 Mode (Numbers Mode)

Type numbers using one keystroke per number.

Symbol Mode

This mode allows you to enter special characters by short pressing * key.

Menu tree

1. Contacts

1.1 Search

1.2 New contact

1.3 Speed dials

1.4 Copy all

1.5 Delete all

1.6 Memory status

1.7 Information

2. Messaging

2.1 New message

2.2 Inbox

2.3 Drafts

2.4 Outbox

2.5 Sent

2.6 Listen voice mail

2.7 Info messages

2.8 Templates

2.9 Settings

3. Call history

3.1 All calls

3.2 Missed calls

3.3 Dialled calls

3.4 Received calls

3.5 Call duration

4. Tools

4.1 Games

4.2 FM radio*

4.3 Calculator

4.4 Stopwatch

4.5 Unit Converter

4.6 World clock

5. Settings

5.1 Proﬁles

5.2 Date & Time

5.3 Language

5.4 Display

5.5 Call

5.6 Auto keylock

5.7 Security

5.8 Power save

5.9 Network selection

5.0 Reset settings

5.* Memory status

6. Organizer (SIM Services)**

6.1 Alarm

6.2 Calendar

6.3 Memo

** In case SIM Services are

also provided by the service provider then Menu 6 will be SIM Services and Organiser will be under Menu 4. Tools.

How to set the tone

Ringtone

1. Press the left soft key [Menu] and select [Settings - Proﬁles] using the up/down navigation keys.

2. Select [General - Personalise] and choose Ringtones menu.

3. Press the left soft key [OK] and then you can set the desired ringtone.

Tip

› If you want to change your ringer to vibrate, select Vibrate mode or press and hold the # key.

Call alert type, Ring tones, Ring volume, Message alert type, Message tones, Message volume, Keypad tones, Keypad volume, Effect sound volume, Power on/off volume

You can select Call alert type, Ring tones, Ring volume, Message alert type, Message tones, Message volume, Keypad tones, Keypad volume, Effect sound volume, Power on/off volume.

You can change the sound that will occur when a key is pressed, or volume level. [Menu - Settings - Proﬁles - General - Personalise]

Quick feature reference

This section provides brief explanations of features on your phone.

Contacts Menu 1

Search You can Search for contacts in Phonebook.

Note: Instant searching is available by inputting the initial letter of the name

you want to search.

New contact You can add phonebook entries by using this menu. Speed dials Assign contacts to any of keys between 2 and 9.

Copy all

You can copy all entries from SIM card memory to Phone memory and

also from Phone memory to SIM card memory.

Delete all

You can delete all entries from SIM card memory or Phone memory.

Memory status

You can check free space and memory usage.

Information

›

Service dial numbers: Access the list of service numbers assigned by

service provider safely.

›

Own numbers: You can save and check your own numbers in SIM card.

›

Business card: This option allows you to create your own business card

featuring your name, mobile phone number and so on.

Messaging Menu 2

This menu includes functions related to SMS (Short Message Services).

New message This menu allows you to type a new message.

Inbox You will be alerted when you have received a message.

Drafts This menu shows the saved message.

Outbox This menu allows to view the message which is about to be sent or has

failed to be sent.

Sent This menu allows you to view the messages which have already been sent,

including time and content.

Listen voice mail This menu provides you with a quick way of accessing your voice mailbox

(if provided by your network).

Info message Info service messages are text messages delivered by the network to your

handset.

Templates There are pre-deﬁned messages in the list. You can view and edit the

template messages or create new messages.

Settings This menu allows you to set features of your network service provider.

FM Radio

(This function may be different in different regions.)

1. Press the corresponding number key of a channel to store the selected radio station.

2. After presetting radio channels, you can listen to another channel by pressing the

corresponding number key.

3. You can access the following option menus by pressing the left soft key

< [Options].

›

Edit channel: You can adjust frequency and channel 0.1 MHz at a time using the

Left/Right navigation keys and number keys.

›

Auto scan: If you turn “Auto Scan Now?” on, this automatically sets the radio channel.

When “Save this Station?” message pops up and you select Yes, the selected frequency will be stored.

›

Reset channels: You can delete all channels you saved.

›

Listen via speaker: You can listen to the FM radio via built-in speaker. When you select

[Options – Listen via wired headset] and connect the ear-mic then you can listen via headset.

Note

› Wireless FM: In weak FM radio signal area the sensitivity can degrade with wireless antenna mode. So

it is advisable to insert the ear-mic for better & enhanced FM quality.

Anti-theft Mobile Tracker (ATMT)

1. The ATMT feature of this phone provides you with the ability to have a tracking system in

place for your Mobile in case you lose or misplace it.

2. The moment an un-authorized user uses your phone, a SMS is triggered from your phone and the Message is sent to your pre-deﬁned number.

3. Setting the ATMT ON [Menu - Settings - Security]

›

Select Anti-theft Mobile Tracker

›

Set ATMT and Select ON

›

Press OK and enter default ATMT code

Note

› In case you want to use your phone with some other SIM card, make sure to set the ATMT OFF. › It is recommended to enter the Number for ATMT with the country code (e.g. for INDIA +91

followed by mobile number)

› Default ATMT code is “0000”.

Installing the SIM Card and Charging the Battery

Installing the SIM Card

When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription details, such as your PIN, any optional services available and many others.

Important!

›

The plug-in SIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SIM cards out of the reach of small children.

›

USIM is not supported in this phone.

›

If the battery is removed for about 1 minute, the clock returns to its default setting. You will then need to reset the time.

Illustrations

Open battery cover Insert your SIM Close battery cover Charge your battery

1 2

3 4

Fully charge the battery before using it for the ﬁrst time.

Phone Components

GB106

Call history Menu 3

You can check the record of missed, received, and dialled calls only if the network supports the Calling Line Identiﬁcation (CLI) within the service area. The number and name (if available) are displayed together with the date and time at which the call was made. You can also view call durations.

All calls Displays all the lists of three types (Received/Dialled/Missed calls) by

time.

Missed calls This option lets you view the last 20 unanswered calls.

Dialled calls This option lets you view the last 20 outgoing calls (called or attempted).

Received calls This option lets you view the last 20 incoming calls.

Call duration Allows you to view the duration of your incoming and outgoing calls.

Tools Menu 4

Games Has List of default games available in the phone.

FM Radio

You can search radio stations and enjoy listening to the radio.

Calculator This contains the standard functions such as +, -, x, ÷: Addition,

Subtraction, Multiplication and Division.

Stopwatch Stopwatch is available just as common stopwatches we see and use in

daily life.

Unit Converter This converts any measurement into a unit you want.

World clock Allows you to determine the current time in another time zone or

country.

Settings Menu 5

You can set the following menus for your convenience and preferences.

Proﬁles You can adjust and customize the phone tones.

Date & Time You can set functions relating to the date and time.

Language You can change the language for the display texts in your phone. This

change will also affect the Language Input mode.

Display You can change settings for the phone display.

Call You can set the menu relevant to a call.

Auto keylock When this feature is enabled, the phone keypad is locked.

Security This menu allows you to set the phone safely.

›

PIN code request: You can set the phone to ask for the PIN code of

your SIM card when the phone is switched on.

›

Phone lock: You can use a security code to avoid unauthorized use of

the phone.

›

Call barring: The Call barring service prevents your phone from making

or receiving a certain category of calls. This function requires the call barring password.

›

Fixed dial number (SIM dependent): You can restrict your outgoing

calls to selected phone numbers. The numbers are protected by your PIN2 code. The numbers you wish to allow access to once this service has been enabled, must be added to the contacts after enabling Fixed dial number.

Settings Menu 5 (Continued)

Security

›

Anti-theft Mobile Tracker: The ATMT feature of this phone provides

(Continued) you with the ability to have a tracking system in place for your mobile

in case you lose or misplace it.

›

Change codes: PIN is an abbreviation of Personal Identiﬁcation

Number to prevent use by unauthorized persons. You can change the access codes: Security code, PIN code, PIN2 code, ATMT code.

Power save If you set this to On, you can save the power when you are not using the

phone.

Network selection

You can select a network that will be registered either automatically or

manually. Usually, the network selection is set to Automatic.

Reset settings You can initialize all setting values as defaults. You need a Security code

to activate this function.

Memory status You can check free space and memory usage of each repository.

Organizer Menu 6

Alarm Allows you to set one of three alarms. The current time is displayed at

the top of the screen when you select an alarm to set. At the alarm time, the Alarm icon will be displayed on the LCD screen and the alarm will sound.

Calendar You can check track of daily or monthly schedules.

Memo You can create a list of tasks.

❏

Guidelines for safe and efﬁcient use

Please read these simple guidelines. Ignoring them may be dangerous or illegal. Further detailed information is given in this manual.

Warning

›

For your safety, use ONLY speciﬁed ORIGINAL batteries and chargers.

›

Switch off the phone in any area where required by special regulations, e.g. in a hospital where

it may affect medical equipment.

›

Batteries should be disposed off in accordance with relevant legislation.

Product care and maintenance

WARNING! Only use batteries, chargers and accessories approved for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous.

›

Do not disassemble this unit. Take it to a qualiﬁed service technician when repair work is

required.

›

The unit should be kept away from heat sources such as radiators or cookers.

›

Use a dry cloth to clean the exterior of the unit. (Do not use any solvents.)

›

Do not keep the phone next to credit cards or transport tickets; it can affect the information

on the magnetic strips.

❏

Guidelines for safe and efﬁcient use (Continued)

Electronic devices

All mobile phones may get interference, which could affect performance.

›

Do not use your mobile phone near medical equipment without requesting permission. Avoid

placing the phone over a pacemaker, i.e. in your breast pocket.

Road safety

Check the laws and regulations on the use of mobile phones in the areas when you drive.

›

Do not use a hand-held phone while driving.

›

Use a hands-free kit, if available.

›

Pull off the road and park before making or answering a call if driving conditions so require.

Blasting area

Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

Potentially explosive atmospheres

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

In aircraft

Wireless devices can cause interference in aircraft.

›

Turn off your mobile phone before boarding any aircraft.

❏

Guidelines for safe and efﬁcient use (Continued)

Children

Keep the phone in a safe place out of children’s reach. It includes small parts which if detached may cause a choking hazard.

Emergency calls

Emergency calls may not be available under all cellular networks. Therefore, you should never depend solely on the phone for emergency calls. Check with your local service provider.

Battery information and care.

›

You do not need to completely discharge the battery before recharging. Unlike other battery

systems, there is no memory effect that could compromise the battery’s performance.

›

Use only LG batteries and chargers. LG chargers are designed to maximize the battery life.

›

Do not disassemble or short-circuit the battery pack.

›

Replace the battery when it no longer provides acceptable performance. The battery pack may

be recharged hundreds of times before it needs to be replaced.

›

Do not expose the battery charger to direct sunlight or use it in high humidity, such as the

bathroom.

›

Risk of explosion if battery is replaced by an incorrect type.

›

Dispose off used batteries according to the manufacturer’s instructions.

❏

Guidelines for safe and efﬁcient use (Continued)

Exposure to radio frequency energy

Radio wave exposure and Speciﬁc Absorption Rate (SAR) information

This mobile phone model has been designed to comply with applicable safety requirement for exposure to radio waves. This requirement is based on scientiﬁc guidelines that include safety margins designed to ensure safety of all persons, regardless of age and health.

›

The radio wave exposure guidelines employ a unit of measurement known as the Speciﬁc

Absorption Rate, or SAR. Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certiﬁed power level in all used frequency bands.

›

While there may be differences between the SAR levels of various LG phone models, they are

all designed to meet the relevant guidelines for exposure to radio waves.

›

The SAR limit recommended by the international Commission on Non-Ionizing Radiation

Protection (ICNIRP) is 2W/kg averaged over ten (10) gram of tissue.

›

The highest SAR value for this model phone tested by DASY4 for use at the ear/body is

[0.686/482] W/kg (10g).

›

SAR data information for residents in countries/regions that have adopted the SAR limit

recommended by the Institute of Electrical and Electronics Engineers (IEEE) is 1.6 W/kg averaged over one (1) gram of tissue.

rmb fUtzo ôƒtrv„ fUhlt ytih cixhe fUtu atso fUhlt

rmb fUtzo ôƒtrv„ fUhlt

sc ytv rfUme muÖgw˜h luxJfoU fUe muJtYk ˜u„u nî, „tu ytvfUtu YfU rmb fUtzo r”gt st„t ni rsmbü ytvfUe d½tnfUe fuU çgtuhu, simu ytvfUt rvl, Wv˜çO JifUrÖvfU muJtYk ytih fURo yàg çgtuhu ˜tuz ntu„u nîš

bnÀJvqKo!

›

rmb fUtzo „ƒt RmfuU mkvfUtuø fUtu Fhtualu gt b∙tuzlu mu ytmtle mu lwfUmtl výka mfU„t

ni, Rmr˜Y fUtzo fUtu mkCt˜lu, Ce„h zt˜lu gt nxtlu fuU mbg mtJOtl hnüš rmb fUtzo fUtu Atuxu cåatü fUe výka mu ”qh hFüš

›

Rm VUtul bü

USIM

mbrƒo„ lné nîš

›

ydh cixhe ¢¥tu ˜dCd 1 rblx fuU r˜Y rl¢¥t˜ r”gt st„t ni, „c D·ze yvle rzVUtpÖx

mu®xd vh yt st„e ni| rVUh ytv¢¥tu vwl: mbg mux ¢¥hlu ¢¥e ytJëg¢¥„t ntude|

raºt

cixhe fUJh Ftu˜ü rmb fUtzo zt˜ü cixhe fUJh fUtu ck” fUhü cixhe fUtu atso fUhü

1 2

3 4

cixhe fUtu vn˜e cth Wvgtud fUhlu mu vn˜u Wmu vqhe „hn atso fUhüš

VUtul fuU yJgJU

yGhtkfUeg fwkUrsgtpk

ytv VUtul fuU fwkUse vx˜ fUt

Œgtud fUhfuU fUtuRo lkch ztg˜

fUh mfU„u nî gt mkvt”l bü

JKo ytih mkÏgt ŒrJíx fUh

mfU„u nîš

Rghvem

mtpÜx fwkUse

Rlbü mu ŒÀgufU fwkUse WlfuU XefU Qvh rzôË˜u vh r”Flu Jt˜u vtXTg Åtht c„tY dY fUtgtuø fUtu fUh„e niš

: mbtË„/vtpJh fwkUse

Rmmu ytv VUtul fUtu at˜q gt ck” fUh mfU„u nî, fUtp˜ mbtË„ fUh mfU„u nî gt rlríf½Ug btuz bü Jtvm st mfU„u nîš

rzôË˜u ôf½Uel

: lurJduNl fwkUse

VUtul fUtgtuø „fU ÀJrh„ výka fuU r˜Y Œgtud fUhüš

: Cusü fwkUse

ytv fUtuRo lkch ztg˜ fUh

mfU„u nî „ƒt ytlu Jt˜e fUtp˜

fUt Wúth ”u mfU„u nîš

YVU Yb hurzgtu

(gn VkU¢Nl y˜d-y˜d Guºttü bü rCàl-rCàl ntu mfU„t niš)

1. hurzgtu ail˜tü fUtu mux fUhlu fuU r˜Y ylwfqU˜ lkch fwkUse fUtu ”ctYkš

2. hurzgtu ail˜tü fUtu vn˜u mu mux fUhlu fuU ct”, ytv mkckrO„ lkch fwkUse fUtu ”ctfUh ”qmht ail˜ mwl mfU„u nîš

3. ytv ctRø mtpÜx fwkUse

< [rJfUÖv] fUtu ”ctfUh rlölr˜rF„ rJfUÖv bulq bü st mfU„u nîš

›

ail˜ mkvtr”„ fUhü ytv ctRø/”tRø lurJduNl fwkUrsgtü ytih lkch fwkUrsgtü fUt Œgtud fUhfuU cthe-cthe mu VU½e¢Jüme

ytih ail˜ 0.1

MHz mu ytdu-veAu fUh mfU„u nîš

›

ôJ„: ôfiUl gr” ytv “yCe ôJ„: ôfiUl fUhü?” fUtu at˜q fUhüdu, „tu Rmmu hurzgtu ail˜ ôJ„: mux ntu stYkduš sc

“gn ôxuNl fUtu hrG„ fUhü?” mk”uN WCh„t ni ytih ytv “ntk” awl„u nî, „tu agrl„ VU½e¢Jüme mkra„ ntu stYdeš

›

ail˜ hemux fUhü ytv hrG„ rfUY dY mCe ail˜tü fUtu rbxt mfU„u nîš

›

ôve¢¥h mu mwllt ytv Y·VUYb hurzgtu ¢¥tu ·VUtul bü rlrbo„ ôve¢¥h Åtht mwl m¢¥„u nîš sc ytv [rJ¢¥Öv-Jtgzo

nuzmux Åtht mwlü] awlüdu ytih nuzmux ˜dtYâdu, „c ytv nuzmux Åtht mwl m¢¥„u nîš

ltux:

›

Jtgh˜um Y·VUYb : ¢¥b·stuh hurzgtu mkfuU„ Guºt bü, Jtgh˜um Yuàxult btuz bü mkJu”lNe˜„t ¢¥b ntu m¢¥„e niš Rmr˜Y, gu m˜tn ”e st„e ni r¢¥ cun„h ytih cr·Zgt YVUYb dwKJútt fuU r˜Y nuzmux ˜dtYâ

yGh J ykfU ŒrJ³ fUhlu fUe „tr˜fUt

rnà”e Nç” r˜Flu fuU W”tnhK

1) rfU„tc fU :- fwkUse 4 fUtu 1 cth ”ctYk š

r :- fwkUse 2 fUtu 2 cth ”ctYk š „ :- fwkUse 7 fUtu 1 cth ”ctYk š t :- fwkUse 2 fUtu 1 cth ”ctYk š c :- fwkUse 8 fUtu 3 cth ”ctYk š

2) Grºtg fU :- fwkUse 4 fUtu 1 cth ”ctYk š

T :- fwkUse 1 fUtu 4 cth ”ctYk š M :- fwkUse 9 fUtu 6 cth ”ctYk š „ :- fwkUse 7 fUtu 1 cth ”ctYk š

T :- fwkUse 1 fUtu 4 cth ”ctYk š h :- fwkUse 9 fUtu 2 cth ”ctYk š r :- fwkUse 2 fUtu 2 cth ”ctYk š g :- fwkUse 9 fUtu 1 cth ”ctYk š

3) Òttle s :- fwkUse 5 fUtu 3 cth ”ctYk š

T :- fwkUse 1 fUtu 4 cth ”ctYk š ™ :- fwkUse 5 fUtu 5 cth ”ctYk š t :- fwkUse 2 fUtu 1 cth ”ctYk š l :- fwkUse 7 fUtu 5 cth ”ctYk š e :- fwkUse 2 fUtu 3 cth ”ctYk š

yGh J ykfU ŒrJ³ fUhlu fUe „tr˜fUt

❏

Technical Data

General

›

Product name : GB106

›

System : GSM 900 / DCS 1800

Ambient Temperatures

›

Max. : +55°C, Charging (+45°C)

›

Min : -10°C

Battery Speciﬁcation

►

Type : 950 mAh, LI-Ion

►

Talk Time* : Up to 10hrs

Note!

► Variation in operation time may occur

depending on SIM card, network condition, usage style, usage setting and environment.

0168

–

(

)

GB106