WASHING
MACHINE
Please read this manual carefully before operating
your washing machine and retain it for future reference.
FH296WDL23 FH296HDL24 FH0B8NDL2
FH296WDL24 FH0B8WDL2 FH0B8NDL25
FH296HDL23 FH0B8WDL25
MFL67584549
P/NO : MFL67584549
Rev. No.: 00
6.0kg : [FH0B8NDL2 / FH0B8NDL25]
6.5kg : [FH0B8WDL2 / FH0B8WDL25 / FH296WDL23
FH296WDL24]
7.0kg : [FH296HDL23 / FH296HDL24]
No Spin/400/800/1000 [FH0B8NDL2 / FH0B8WDL2]
[FH0B8NDL25 / FH0B8WDL25]
No Spin/400/800/1200 [FH296WDL23 / FH296HDL23]
[FH296WDL24 / FH296HDL24]
carpeted floor.
subjected
in
caused
Unpacking
Cut the straps and open the upper flaps of Packing box & take out the Anti Rat Cover. While taking out the Machine from packing, please take due care in removing packing support given at centre of the base packing.
Anti Rat Cover is placed below the upper flaps of the Packing box.
Packing Support
Anti Rat Cover installation
Accessories for fixing Anti Rat Cover.
1.Take out the poly bag (containing Screws/Washers).
2.Tilt the machine sideways.
3.Bend & insert the flaps of Anti Rat Cover into the bottom side of machine.
4.Assemble the Anti Rat Cover on the bottom side of the machine by using Screws & Washers.
Machine.
5
adjustable legs
It is advisable to avoid, the usage of trolley & the movement of Washing Machine after installation. As it may disturb the levelling of washer, which can create excessive noise & vibration.
6
(0.3~10kgf/cm²)
Part can be different according to different models.
Two rubber seals are provided with inlet hose connectors.
These are used to prevent water leakage.
Make sure the connection to tap is sufficiently tight.
Check rubber seals in inlet hose |
Screw the hose connector onto |
connectors. |
water supply tap. |
Hose
Connector
Rubber seal