LG FB164-A0B Owner's Manual

FB164-A0B_DIRNDLK_ENG_5743 4/9/10 5:05 PM Page 1

User Guide

FB164 (FB164-A0B, FBS164V)

P/NO : MFL62755743

FB164-A0B_DIRNDLK_ENG_5743 4/9/10 5:05 PM Page 2

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

O REDUCECAUTIONTHE RISK: OF ELECTRIC SHOCK DO NOT REMOVE

COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

o not installWARNINGthis equipment: in a confined space such as a book case or similar unit.

his productCAUTIONemploys a:Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

he apparatusCAUTIONshall not: be exposed to water (dripping or splashing) and

no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit ;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

This device is equipped with a portable battery or accumulator.

Safe way to remove the battery or the battery from the equipment:

Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators.

The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC and 2009/125/EC.

European representative :

LG Electronics Service Europe B.V.

Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : [phone])

2

FB164-A0B_DIRNDLK_ENG_5743 4/9/10 5:05 PM Page 3

Welcome to your New DVD MICRO Hi-Fi SYSTEM

Contents

Setting up	4
Main Unit	5
Remote control	6
OSD initial language settings - Optional	7
Initial setting the Area Code - Optional	7
Adjusting the general settings	8-9
Setting the Clock	10
TV sound EZ setup	10
Displaying disc information	11
Playing a Disc or file	11-13
Listening to the radio	14
Using a Bluetooth wireless technology	14-15
Listening to music from your portable player	16
Using an USB device	16
Recording to USB	17
Language Codes	18
Area Codes	18
Troubleshooting	19
Types of Playable Discs	20
Specifications	21

Precautions in using the touch buttons

•Use the touch buttons with clean and dry hands.

-In a humid environment, wipe out any moisture on the touch buttons before using.

•Do not press the touch buttons hard to make it work.

-If you apply too much strength, it can damage the sensor of the touch buttons.

•Touch the button that you want to work in order to operate the function correctly.

•Be careful not to have any conductive material such as metallic object on the touch buttons, and it can cause malfunctions.

3

FB164-A0B_DIRNDLK_ENG_5743 4/9/10 5:05 PM Page 4

Setting up

Connecting your unit to your TV and aerials.

a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.

CheckA the jacks of your TV and choose the, A B connection. Picture quality improves in order from .to B

Component Video connection) (B

Connect the COMPONENT VIDEO (PROGRESSIVE SCAN) OUTPUT jacks on the unit to the corresponding input jacks on your TV using a Y PB PR cable. - If your TV accepts progressive format

signals, you must use this connection and set [Progressive Scan] in [Display] setup to [On] (See page 8).

Stretch the FM aerial.

The reception will be at its best when the end of the aerial is stretched to be in a straight line and horizontal.

Fit the AM loop aerial to its stand

Connect the AM loop aerial to the unit.

	PR	PB
		MONITOR
Y		SCAN)
	IDEOV (PROGRESSIVE
COMPOMENT		PUT
	OUT

IN

OPTICAL

ANTENNA

Video Out connection) (A

Connect the VIDEO OUTPUT(MONITOR) jack on the unit to the corresponding input jack on your TV using a Video cable.

Connect the speaker cables to the player

To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.

Connect the black end of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus).

b Plug the unit plug into a wall socket.

4

FB164-A0B_DIRNDLK_ENG_5743 4/9/10 5:05 PM Page 5

Main Unit

TOP

FUNC.

(Function) Selects the function.

1/]Power)(

Turn the unit on and off.

Disc Slot

• Do not force a disc into the CD slot.

• Do not pull or push a disc while a disc is ejected.

•Press Z again to reinsert the disc after ejecting it.

•Insert the disc into the CD slot with the label side

toward the front of the unit.

USB REC.

Recording to USB.

Z

Ejects or insert the disc from slot loader.

USB Port

FRONT

EQ/ DEMO

You can choose fixed sound impression.

Press DEMO in power off state to demonstrate the function on display window.

CLOCK

(See “Setting the Clock” )

TIMER

(See the “Using your player as an alarm clock”)

SET

Confirms the settings.

PORTABLE IN

For connecting a portable device and listening to sound from it through this system’s speakers.

PHONES

Headphone jack

Display Window

x STOP

Stop

]II / ii]

Scanning/ Tuning/ Searching

VOL +

B/X

Play/ Pause

VOL +/-

Volume control

VOL -

5

FB164-A0B_DIRNDLK_ENG_5743 4/9/10 5:05 PM Page 6

Remote control

ORETURN ( Moving backwards in the menu or exiting the setup menu.

	SB) :zDirectRECRecording(		.		SLEEP
	) :x	STOP (	Stops playback or recording.
	), BMO./STPLAY.: (			Starts playback. Selects Mono/
		Stereo.
		PAUSE/STEP (		Pause playback.
	./>SKIP (			Go to next or previous chapter/ track/
		file.

SCAN (bb/BB) : Search backward or forward.

TV Control buttons : Controls the TV. (LG TV only)

Controlling the TV

You can control the sound level, input source, and power switching of LG TVs as well. Hold POWER (TV)

PR/CH and press –/) button(+ repeatedly until the TV turns on or off.

PROG./MEMO. : Accesses or removes Program menu. CLEAR : Removes a track number on the Program List.

Put the battery into the remote control

Make sure that the + (plus) and - (minus) on the battery match those on the remote control.

	FUNCTION : Selects the function and input source.
	SLEEP : You can select delay time between 10 and 180
	minutes, after which the player will turn off. To check the
. (DimmerSLEEP: Press	remaining time, press
	once. Dims the LED (Light-emitting diode) of front panel by
	half in power-on status.)

Switches1thePOWERunit ON: or OFF.

Opens and closesZ OPEN/CLOSEthe disc Drawer: .

TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear.

	DISPLAY : Accesses On-Screen Display.
	MENU : Accesses the menu on a DVD disc.
	SETUP : Accesses or removes setup menu.
) : U u	PRESET (	Selects programme of Radio.

TUN. (-/+) : Tunes in the desired radio station.

U u I i (up/ down/ left/ right ): Used to navigate onscreen displays.

AcknowledgesENTERmenu: selection.

TVtSPK : To select the AUX OPT directly.

To mute MUTEthe sound: .

VOL (Volume) (+/-) : Adjusts speaker volume.

EQ/ LG EQ (Equalizer effect) : You can choose sound impressions.

REPEAT/RANDOM : To select a play mode. (repeat/ random)

SUBTITLE : During playback, you can select a desired subtitle language.

0-9 numerical buttons : Selects numbered options in a menu.

6

FB164-A0B_DIRNDLK_ENG_5743 4/9/10 5:05 PM Page 7

OSD initial language settings - Optional

When using this unit for the first time, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit.

		ON REMOTE
1	Turn the power on	POWER
	The language list appears
2	Select the language	I i U u
3	Press	ENTER
4	To confirm press	ENTER

Initial setting of the Area

Code - Optional

When you use this unit for the first time, you have to set the Area Code as shown below.

		ON REMOTE
1	Display setup menu	SETUP
2	Select LOCK menu on the first level	U u
3	Move to second level	i
	The activated Area Code appears on the
	second level.
4	Move to the third level	i
5	Enter a new password	Numeric (0-9)
		and ENTER
6	Recheck the entered new password	Numeric (0-9)
		and ENTER
7	Select a code for a geographic area	U u I i
	After select, Rating and Password will be
	activated.
8	To confirm what you press	ENTER
	Make sure to finish setting the Area Code.

7