LG F6V1010WTSE, F6V1009BTSE Owner’s Manual

OWNER'S MANUAL

WASHING MACHINE

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.

EN ENGLISH

F6V10***TSE

MFL71724724

Rev.00_061220

www.lg.com

TABLE OF CONTENTS

This manual may contain images or content that may be different from the model you purchased.

This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE........................................................... 4

WARNING............................................................................................................4

CARING FOR THE ENVIRONMENT....................................................................9

INSTALLATION

Parts and Specifications ..................................................................................10

Installation Place Requirements ....................................................................12

Unpacking the Appliance ................................................................................14

Levelling the Appliance ...................................................................................15

Connecting the Water Supply Hose...............................................................16

Installing the Drain Hose ................................................................................18

OPERATION

Operation Overview.........................................................................................19

Preparing the Wash Load ...............................................................................20

Adding Detergents and Softeners .................................................................21

Control Panel ....................................................................................................24

Programme Table ............................................................................................27

Extra Options and Functions ..........................................................................33

SMART FUNCTIONS

LG ThinQ Application.......................................................................................37

Smart Diagnosis ...............................................................................................40

MAINTENANCE

Cleaning After Every Wash..............................................................................42

Cleaning the Appliance Periodically & Performing an Emergency Water

Evacuation.........................................................................................................43

TROUBLESHOOTING

Before Calling for Service................................................................................46

APPENDIX

Product Fiche....................................................................................................55

WARNING

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

Safety Messages

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

Technical Safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

SAFETY INSTRUCTIONS

• Children of less than 3 years should be kept away unless continuously supervised.

• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Ventilation openings must not be obstructed by a carpet.

• This appliance is intended to be used in household only.

• Use a new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage.

• The water pressure must be between 50 kPa and 800 kPa.

Maximum Capacity

The maximum capacity in some cycles for dry clothes to be washed is:

F6V1010*TSE F6V1009*TSE

10.5 kg 9 kg

The recommended maximum capacity for each washing programme may differ. To get good wash results, please refer to

Table

OPERATION

chapter for further details.

Programme

Installation

• Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

• This appliance should only be transported by two or more people holding the appliance securely.

• Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, rain, or temperatures below freezing.

• Make sure the power plug is completely pushed into the power outlet.

• Do not plug the appliance into multiple outlet sockets, power boards, or an extension power cable.

SAFETY INSTRUCTIONS

• Do not modify the power plug provided with the appliance. If it does not fit the power outlet, have a proper outlet installed by a qualified electrician.

• This appliance is equipped with a power cord having an equipmentearthing / grounding conductor (earthing pin) and a grounding power plug. The power plug must be plugged into an appropriate outlet socket that is installed and earthed / grounded in accordance with all local codes and ordinances.

• Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.

• This appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the appliance, in such a way that a full opening of the appliance door is restricted.

Operation

• Do not apply any sharp objects to the control panel in order to operate the appliance.

• Do not attempt to separate any panels or disassemble the appliance.

• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner's Manual. Use only authorized factory parts.

• Do not push down the door excessively, when the appliance door is open.

• Do not put animals, such as pets into the appliance.

• Do not wash rugs, mats, shoes or pet blankets, stuffed toys, or any other items other than clothes or sheets, in this machine.

• Keep the area underneath and around the appliance free of combustible materials such as lint, paper, rags, chemicals, etc.

• Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.

• Do not put in, wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances

SAFETY INSTRUCTIONS

(such as waxes, wax removers, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, petrol, spot removers, turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can cause fire or explosion.

• Do not use or store flammable or combustible substances (ether, benzene, alcohol, chemical, LPG, combustible spray, gasoline, thinner, petroleum, insecticide, air freshener, cosmetics, etc.) near the appliance.

• Never reach into the appliance while it is operating. Wait until the drum has completely stopped.

• Do not touch the door during a high temperature programme.

• In case of a water leak from the appliance or flood, disconnect the power plug and contact the LG Electronics customer information centre.

• Turn off water taps to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they should be replaced after 5 years.

• If there is a gas leakage (isobutane, propane, natural gas, etc.) within the home, do not touch the appliance or power plug and ventilate the area immediately.

• If the drain hose or inlet hose is frozen during winter, use it only after thawing.

• Keep all washing detergents, softener and bleach away from children.

• Do not touch the power plug or the appliance controls with wet hands.

• Do not bend the power cable excessively or place a heavy object on it.

• Avoid touching any water that is drained from the appliance during the wash.

• Make sure that drainage is working properly. If water is not drained properly, your floor may get flooded.

• When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor.

• Wipe off dirt or dust on the contacts of the power plug.

SAFETY INSTRUCTIONS

Maintenance

• Disconnect the appliance from the power supply before cleaning the appliance. Setting the controls to the OFF or stand by position does not disconnect this appliance from the power supply.

• Securely plug the power plug in the outlet socket after completely removing any moisture and dust.

• Do not spray water inside or outside the appliance to clean it.

• Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the outlet socket.

• Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.

Disposal

• Before discarding an old appliance, unplug it. Cut off the cable directly behind the appliance to prevent misuse.

• Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation.

• Remove the door before disposing of or discarding this appliance to avoid the danger of children or small animals getting trapped inside.

CARING FOR THE ENVIRONMENT

Disposal of Your Old Appliance

• This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream.

• Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products, and other valuable materials that can be recycled to conserve limited resources.

• You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country, please see www.lg.com/global/recycling.

SAFETY INSTRUCTIONS

NOTE

INSTALLATION

Parts and Specifications

• Appearance and specifications may change without notice to improve the quality of the appliance.

Front View

Control Panel

Detergent Dispenser Drawer

Drum

Door

Cover Cap

Drain Pump Filter

Drain Plug

Levelling Feet

Rear View

Power Plug

Transit Bolts

Drain Hose

INSTALLATION

E D C

Accessories

*1 The included accessories vary depending on the model you purchased.

Cold Supply Hose

Spanner

Anti–slip Sheets*1

Elbow Bracket for Securing Drain

Hose

Caps for Covering Transit Bolt

Tie Strap

Holes

Specifications

Model F6V10***TSE

Power Supply 220‒240 V~, 50 Hz

Product Weight 70 kg

Dimension(mm)

A 600 mm C 565 mm E 1100 mm

B 850 mm D 620 mm

WARNING

NOTE

INSTALLATION

Installation Place Requirements

Before installing the appliance, check the following information to make sure that the appliance should be installed in a correct place.

Installation Location

• This appliance must be installed on firm flooring to minimize vibration during the spin cycle. Concrete flooring is best, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface.

• If it is impossible to avoid positioning the appliance next to a gas cooker or coal burning stove, an insulation (850 X 600 mm) covered with aluminum foil on the side facing the cooker or stove must be inserted between the two appliances.

• Ensure that when the appliance is installed, it is easily accessible for an engineer in the event of a breakdown.

• When installing the appliance, adjust all four feet using the transit bolt spanner provided to ensure the appliance is stable.

or floor moldings that may increase the required clearances.

• This appliance must only be used for domestic household purposes and should not be used in mobile applications.

• Never try to level any uneven floor by putting pieces of wood, cardboard or similar materials under the appliance.

100 mm

5 mm

20 mm

Floor Installation

To ensure sufficient clearance for water inlet hoses, drain hose and airflow, allow minimum clearances of at least 20 mm at the sides and 100 mm behind the appliance. Be sure to allow for wall, door,

Wooden Floors (Suspended Floors)

When installing the appliance on wooden floors, use rubber cups to reduce excessive vibration and unbalance. Timber or suspended type flooring may contribute to excessive

INSTALLATION

CAUTION

NOTE

WARNING

vibration and unbalance, errors and malfunction.

• To reduce vibration, we recommend placing at least 15 mm thickness of

rubber cups foot of the appliance, secured to at least two floor beams with screws.

• If possible, install the appliance in one of the corners of the room, where the floor is more stable.

• Fit the rubber cups to reduce vibration.

• If the appliance is installed on the unstable floor (e.g. wooden floor), the warranty does not cover any damages and cost occurred due to the installation on the unstable floor.

under each adjusting

Ambient Temperature

• Do not install the appliance in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

• If the appliance is delivered in winter and temperatures are below freezing, place the appliance at room temperature for a few hours before putting it into operation.

Electrical Connection

• Do not use an extension cord or double adapter.

• Always unplug the appliance and turn off the water supply after use.

• Connect the appliance to an earthed socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

• Power outlet must be within 1 meter of either side of the appliance.

• You can purchase rubber cups (part No.

4620ER4002B

centre.

) from the LG service

Ventilation

• Make sure that air circulation around the appliance should not be impeded by carpets, rugs, etc.

• Repairs to the appliance must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local authorised LG repairer.

• The power plug must be plugged into an appropriate outlet socket that is installed and grounded/earthed in accordance with all local codes and ordinances.

NOTE

INSTALLATION

Unpacking the Appliance

Lifting the Appliance Off the Foam Base

* This feature may vary depending on the model purchased.

After removing the carton and shipping material, lift the appliance off the foam base.

• Make sure the tub support off with the base and is not stuck to the bottom of the appliance.

• If you must lay the appliance down to remove the carton base protect the side of the appliance and lay it carefully on its side. Do not lay the appliance on its front or back.

* comes

, always

fully loosen all transit bolts by turning them counterclockwise.

Remove the bolt assemblies by wiggling them slightly while pulling them out.

Install the hole caps.

• Locate the hole caps the accessory pack or attached on the back.

included in

Removing the Transit Bolt Assemblies

To prevent the appliance from severe vibration and breakage, remove transit bolts and retainers.

Starting with the bottom two transit bolts

, use the spanner (included) to

• Save the transit bolts and retainers for future use.

• Transport this appliance for the prevention of breakage as below:

- The transit bolts are reinstalled.

- The power cord is secured to the

back of the appliance.

Levelling the Appliance

NOTE

Checking the Level

When pushing down the edges of the top plate diagonally, the appliance should not move up and down at all (check both directions).

• If the appliance rocks when pushing the top plate of the appliance diagonally, adjust the feet again.

• Check whether the appliance is perfectly level after installation.

• Timber or suspended type flooring may contribute to excessive vibration and unbalance. Reinforcement or bracing of the timber floor may need to be considered to stop or reduce excessive noise and vibration.

INSTALLATION

• Do not install the washing machine on a plinth, stand or elevated surface unless it is manufactured by LG Electronics for use with this model.

Check if the appliance is perfectly level using a spirit level

Adjusting and Levelling the Feet

When installing the appliance, the appliance should be aligned and perfectly level. If the appliance is not aligned and level properly, the appliance may be damaged or may not operate properly.

Turn the levelling feet as required if the floor is uneven.

• Do not insert pieces of wood etc. under the feet.

• Make sure that all four feet are stable and resting on the floor.

Secure the levelling feet with the lock nuts

by turning anti-clockwise

against the bottom of the appliance.

Check if all lock nuts at the bottom of the appliance are secured properly.

• Proper placement and levelling of the appliance will ensure long, regular, and reliable operation.

NOTE

• The appliance must be 100% horizontal and stand firmly in position on a hard flat floor.

• It must not ‘Seesaw’ across corners under the load.

• Do not let the feet of the appliance get wet. Failure to do so may cause vibration or noise.

INSTALLATION

Using Anti-Slip Sheets

This feature may vary depending on the model purchased.

If you install the appliance on a slippery surface, it may move because of excessive vibration. Incorrect levelling may cause malfunction through noise and vibration. If this occurs, install the anti-slip sheets under the levelling feet and adjust the level.

appliance, attach them under the rear feet.

Put the appliance on the anti-slip sheets.

• Do not attach the adhesive side of anti-slip sheets to the feet of the appliance.

• Additional anti-slip sheets are available at LG Electronics service centre.

Clean the floor to attach the anti-slip sheets.

• Use a dry rag to remove and clean foreign objects and moisture. If moisture remains, the anti-slip sheets may slip.

Adjust the level after placing the appliance in the installation area.

Place the adhesive side a of the antislip sheets on the floor.

• The most effective way is to install the anti-slip sheets under the front feet. If it is difficult to place the sheets under the front feet of the

Connecting the Water Supply Hose

Note for Connection

• Water pressure must be between

kPa

and

800 kPa

the water pressure is more than

kPa

, a decompression device should

be installed.

• Periodically check the condition of the water supply hose and replace the water supply hose if necessary.

• Do not overtighten the water supply hose or use mechanical devices to tighten onto the inlet valves.

(0.5‒8.0 kgf/cm²). If

800

• No further backflow protection

NOTE

required for connection to the water inlet.

Checking the Rubber Seal

Two rubber seals a are supplied with the water supply hose. They are used to prevent water leaks. Connection to taps is sufficiently tight.

• Do not use mechanical devices such as multi grips to tighten the water supply hose. Ensure that the curved end of the water supply hose is connected to the appliance.

INSTALLATION

• After connecting the water inlet hose to the water tap, turn on the water tap to flush out foreign substances (dirt, sand, sawdust, and etc.) in the water lines. Let the water drain into a bucket, and check the water temperature.

Connecting the Hose to the Appliance

Screw the supply hose to the water inlet valve on the back of the appliance.

Connecting the Hose to the Water Tap

Connecting Screw-Type Hose to Tap with Thread

Screw the supply hose connector onto the water supply tap. Hand tighten only with the aid of a soft cloth. Do not overtighten the supply hose with any mechanical device.

• Do not connect the hose to the hot water supply for models with one water inlet. Connect to the cold water supply only.

• After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of tap for the water supply. In case that the tap is square or too big, remove the guide plate before inserting the tap into the adaptor.

• Make sure that the hose should not be kinked or trapped.

DN

INSTALLATION

Installing the Drain Hose

Installing the Drain Hose with the Elbow Bracket

The drain hose should not be placed higher than Water in the appliance may not drain or may drain slowly.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

100 cm

above the floor.

• When installing the drain hose to a sink, secure it tightly with string.

• If the drain hose is too long, do not force it back into the appliance. This will cause abnormal noise.

+ 42 hidden pages