LG F14A8RD5, F14A8YD5 User Manual [de]

OWNER’S MANUAL

WASHING MACHINE

F14A8RD(1~9)

P/No.: MFL67379113

www.lg.com

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference.

Contents

Contents....................................2

Product Features......................3

Important safety instructions

Important safety instructions .................4

Basic safety precautions .......................5

Save these instructions.........................6

Safety instructions for use.....................7

Specifications...........................8

Installation

Removing packing ................................9

Removing transit bolts ..........................9

Installation place requirements ...........10

Connecting water supply hose............12

Installation of drain hose .....................14

Leveling...............................................15

How to use washer

Operating washing machine ...............17

Care before washing...........................18

Washing program table.......................19

Drying Program Table.........................20

Extra options .......................................21

Operating data ....................................21

Control panel.......................................22

Additional program..............................23

- Time Delay........................................23

- Medic Rinse ......................................23

- Favorite.............................................23

- Pre Wash ..........................................22

Options................................................24

- Wash.................................................24

- Rinse.................................................24

- Temp.................................................24

- Spin...................................................24

Other functions....................................24

- Spin Only .........................................24

Child Lock ...........................................25

Beep On/Off ........................................25

Tub Clean ...........................................26

Door Lock & Detecting ........................26

Dry ......................................................27

Thank you for buying a LG Fully Automatic Washing Machine.

Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance. Retain it for future reference.

Record the model and serial number of your washing machine.

Model No. Serial No. Date of Purchase

Adding detergent

Adding detergent and fabric softener..29

Maintenance

The water inlet filter.............................31

The drain pump filter ...........................32

Dispenser drawer................................33

The washing drum ..............................34

Cleaning your washer .........................34

Cold conditions ...................................34

Troubleshooting guide

Diagnosing problems ..........................35

Error messages...................................37

Using SMARTDIAGNOSIS™..............38

Terms of warranty ..................39

추가선택 예약

Product Features

Inverter Direct Drive system

The advanced Brushless DC motor directly drives the drum without belt and pulley.

6 Motion

Washer is able to perform various drum actions or a combination of different actions depending on the wash program selected. Combined with a controlled spin speed and the ability of the drum to rotate both left and right, the wash performance of the machine is greatly improved, giving you perfect results every time.

Protection against creases

With the alternating rotation of the drum, creasing is minimized.

Built-in heater

Internal heater automatically heats the water to the best temperature on selected cycles.

More economical with Intelligent Wash system

Intelligent Wash System detects the size of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.

Child Lock

The Child Lock prevents children from pressing any button to change the settings during operation.

Low noise speed control system

By sensing the amount of load and balance, it evenly distributes load to minimize the spinning noise level.

Important safety instructions

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE.

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

Your Safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.

These words mean:

DANGER

You will be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Important safety instructions

■ Basic safety precautions

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:

• Before installation, check exterior damages. If it has, do not install.

• Do not install or store the washer where it will be exposed to the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.

• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.

• The appliance is not intended for use by young children or infirm persons without supervision. Do not allow children to play on, with, or inside this or any other appliance.

• Keep small animals away from the appliance.

• Do not leave the washer door open.

An open door could entice children to hang on the door or crawl inside the washer.

• Never reach into washer while it is moving. Wait until the drum has completely stopped.

• The laundry process can reduce the flame retardant of fabrics.

result, carefully follow the garment manufacturer’s wash and care instructions.

To avoid such a

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may ignite or explode. Oil may

remain in the tub after a whole cycle resulting in fire during drying.

So, do not load oiled clothes.

• Do not slam the washer door closed or try to force the door open when locked. This could result in damage to the

washer.

• When the machine runs high temperature, the front door may be very hot. Don’t touch it.

• To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.

• When unplugging power cord, do not pull out by grasping the cord.

Otherwise, the power cord may be damaged.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Important safety instructions

■ Basic safety precautions

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:

• Before discarding an old machine unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.

• When a product was under water, Please call service center. There is a

risk of electric shock and fire.

• Appliance connected to the water mains using new hose-sets. Old hosesets should not be reused.

• To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety

warnings in this manual could result in property, personal injury or death.

• Do not push down the door excessively, when washer door open.

This could topple over the washer.

■ Save these instructions

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.

• Do not use an adapter this will defeat the grounding plug.

• If you don’t have the proper outlet, consult an electrician.

WARNING

Improper connection of the equipment-grounding conductor can result in electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Important safety instructions

■ Safety instructions for use

To minimize the risk of fire within the inner bowl, the following should be observed:

• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer.

Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard. If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent-this will reduce, but not eliminate, the hazard. The ‘cool down’ cycle of tumble dryers should be used to reduce the temperature of the items. They should not be removed from the tumble dryer or piled or stacked while hot.

• Items that have been previously cleaned in, washed in, soaked in or spotted with petrol/gasoline, drycleaning solvents or other flammable or explosive substances should not be placed in a tumble dryer. Highly

flammable substances commonly used in domestic environments include acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some brands), turpentine, waxes and wax removers.

• Items containing foam rubber (also known as latex foam) or similarly textured rubber like materials should not be dried in a tumble dryer on a heat setting. Foam rubber materials can,

when heated, produce fire by spontaneous combustion.

• Fabric softeners or similar products should not be used during a drying cycle, to eliminate the effects of static

electricity unless this practice is specifically recommended by the manufacturer of the fabric softener or product.

• Undergarments that contain metal reinforcements should not be placed in a tumble dryer.

Damage to the tumble dryer can result if metal reinforcements come loose during drying. When available a drying rack could be used for such items.

• Plastic articles such as shower caps or babies waterproof napkin covers should not be placed in a tumble dryer.

• Rubber-backed articles, clothes fitted with foam rubber pads, pillows, rubber boots and rubber-coated tennis shoes should not be placed in a tumble dryer.

Specifications

Transit bolts

Drawer

(For detergent and

fabric softener)

Drain hose

Door

Adjustable feet

■ Name : Front loading washing machine

■ Power supply : 220 - 240 V~, 50 Hz

■ Size : 600 mm (W)  640 mm (D)  850 mm (H)

■ Weight : 72 kg

■ Max.Watt : 2100 W (Wash) / 1500 W (Dry)

■ Wash capacity : 9 kg (Wash) / 6 kg (Dry)

■ Permissible water pressure : 100 - 1000 kPa (1.0 - 10.0 kgf / cm

Power plug

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid a hazard.

Control panel

Drum

Drain pump filter

Drain plug

Lower cover cap

)

The appearance and specifications may vary without notice to improve the quality of the unit.

■

Accessories

Inlet hose (1EA) Spanner

Installation

■ Removing packing

1. Remove the cardboard box and

styrofoam packing.

2. Lift the washing machine and remove

Washer

Base Packing

Spanner

WARNING

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.

There is a risk of suffocation ! Keep all packaging well away from children.

■ Removing transit bolts

To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. If they are not removed, it may cause heavy vibration, noise and malfunction.

the base packing.

3. Remove the tape securing the power

supply cord and drain hose.

4. Remove the inlet hose from the drum.

NOTE

• Keep the spanner provided for future use.

Transit bolt

1. Unscrew the 4 bolts with

the spanner supplied.

2. Take out the 4 bolts along with the

rubber bungs by slightly twisting the bung.

NOTE

• Keep the transit bolts for future use.

3. Close the holes with the caps supplied.

Installation

Washer

approx.

2cm

■ Installation place requirements



Location

• Level floor :

Allowable slope under entire washer is 1˚

• Power outlet :

Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.

• Additional Clearance :

For Wall, 10cm:rear / 2cm : right & left side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls.



Positioning

• Install the washer on a flat hard floor.

• Make sure that air circulation around the washer is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer.

• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.

• The washer must not be installed in rooms where the temperature can drop below 0°C.

• Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.

• With the washer installed, adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and the underside of any work-top.

• This equipment is not designed for maritime use or for use in a mobile installations such as caravans, aircraft etc.



Electrical connection

• Do not use an extension cord or double adapter.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

• Always unplug the machine and turn off the water supply after use.

• Connect the machine to an earthed socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

• Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center

• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

• If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing machine at room temperature for a few hours before putting it into operation.

Installation

CAUTION

CAUTION concerning the Power cord

• Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in an electric shock or fire.

• Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. If the appliance is supplied from a cord extension set or an electrical portable outlet device, The cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

CAUTION

• The appliance is not intended for use by young children or infirm persons without supervision.

• Young children should be supervised to ensure that they do not play with appliance.

Installation

■ Connecting water supply hose

• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm2).

• Do not strip or crossthread when connecting inlet hose to the valve.

• If the water supply pressure is more than 1000 kPa, a decompression device should be installed.

• Periodically check the condition of the hose and replace the hose if necessary.

Step1 : Check rubber seal inlet hose

• Two rubber seals are supplied with the water inlet hoses. They are used for preventing water leaks.

Hose connector

Rubber seal

Hose connector

Rubber seal

Step2 : Connect hose to water tap

Type-A : Connecting Screw-type hose to tap with thread

Make sure the connection to taps is sufficiently tight.

• Screw the hose connector onto water supply tap.

Type-B : Connecting Screw-type hose to tap without thread

Upper connector

Rubber packing

1. Unscrew the adapter ring plate and the 4

adapter retaining screws.

2. Push the adapter onto the end of the tap

so that the rubber seal forms a watertight

Fixing screw

connection. Tighten the adapter ring plate and the 4 screws.

3. Push the water supply hose vertically

upwards so that the rubber packing within

Plate

Water supply hose

the hose can adhere completely to the tap and then tighten it by screwing it to the right.

Installation

Type-C : Connecting one touch type hose to tap without thread

1. Unscrew the adapter ring plate and

the 4 adapter retaining screws.

Ring plate

Guide plate

Latch plate

2. Remove the guide plate if the tap is

too large to fit the adapter.

3. Push the adapter onto the end of

the tap so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.

4. Pull the connector latch plate down,

push the inlet hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place.

NOTE

• After connecting inlet hose to water tap, turn on the water tap to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.



Step3: Connect hose to washer

• Make sure that there are no kinks in the hose and that they are not crushed.



When your washer has two valves.

• The Inlet hose which has red connector is for the hot water tap.

• If the washer has two valves, the energy is saved by using hot valve.

NOTE

• After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

Please use the horizontal tap

Horizontal tap Extension tap Square tap

Installation

 Installation of drain hose

about 100 cm

about 145 cm

about 105 cm

max. 100 cm

• The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or drains slowly.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

• If the drain hose is too long, do not force back into the washer. This will cause abnormal noise.

• When installing the drain hose to a sink, secure it tightly with string.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

Laundry tub

max. 100 cm

Hose

Retainer

max. 100 cm

Tie strap

Installation

■ Leveling

Raise Lower

Lock Nut

Tighten all 4 locknuts securely

1. Leveling the washing machine properly

prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.

NOTE

• Timber or suspended type flooring may contribute to excessive vibration and unbalance.

2. If the floor is uneven, turn the adjustable feet

as required. (do not insert pieces of wood etc. under the feet) Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. (use a spirit level)

Once the washer is level, tighten the lock

• nuts up towards the base of the washer. All lock nuts must be tightened.

Diagonal Check

• When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all (Please, check both directions). If machine rocks when pushing the machine top plate diagonally, adjust the feet again.

NOTE

• If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.

Installation



Concrete floors

• The installation surface must be clean, dry and level.

• Install washer on a flat hard floor.



Tile floors (Slippery floors)

• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.)

• Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.



Wooden floors (Suspended floors)

Wooden floors are particularly susceptible to vibration.

• To prevent vibration we recommend you place rubber cups under

• each foot under washer at least 15mm thick, secured to at least 2 floor beams with screws. If possible install the washer in one of the corners of the room, where the floor is more stable.

• Fit the rubber cups to reduce vibration.

•

You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept.

Rubber Cup

NOTE

• Proper placement and leveling of the washer will ensure long, regular and reliable operation.

• The washer must be 100% horizontal and stand firmly in position.

• It must not “Seesaw” across corners under load.

• The installation surface must be clean, free from floor wax and other lubricant coatings.

• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.

How to use washer

 Operating washing machine

1. Sort Laundry.

(Refer to 18 page)

2. Open the door and load laundry.

3. Press the Power button.

4. Select a Program.

(Refer to 19~21 page)

Select options at this time (Refer to 23~28 page)

■ Additional Program

■ Temperature

■ Spin Speed

■ Other functions

5. Add detergent.

(Refer to 29~30 page)

6. Press the Start/Pause button.

How to use washer

■ Care before washing

Wash temperature

Normal machine wash

Permanent press

Hand wash

Sort laundry by...

Soiling

Colour

Delicate

Do not wash

Wash temperature

Fabric type

1. Care Labels

Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed.

2. Sorting

To get the best results, sort clothes into loads that can be washed with the same wash cycle. Water temperature and spin speed and different fabrics need to be washed in different ways. Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing discolouration of white etc. If possible, do not wash heavily soiled items with lightly soiled one.

• Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.

• Color (White, Lights, Darks) Separate white fabrics from colored fabrics.

• Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

3. Caring before loading

Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.

• Check all pockets to make sure that they are empty. Items such as nails, hair clip, matches, pens, coins and keys can damage both your washer and your clothes.

• Close zippers, hooks and strings to make sure that these items don’t snag on other clothes.

• Pre treat dirt and stains by brushing a little detergent dissolved in water onto stains like collars and cuffs to help lift dirt.

• Check the folds of the flexible gasket (gray) and remove any small articles.

• Check inside of the drum and remove any item from a previous wash.

• Remove any clothing or items from the flexible gasket to prevent clothing and gasket damage.

NOTE

• Before the first wash, select a cycle (Cotton 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing.

How to use washer

 Washing program table

•

Recommended courses according to the laundry type.

Program

Cotton

Eco

Easy Care

Mix

Baby Care

Silent

Wash

Skin

Care

Duvet

Sports

Wear

Wool

Quick 30

Dry Only

Wash+

Dry

Rinse+

Spin

Provides better performance by combining various drum motions.

Provides optimized washing performance with less energy consumption.

This cycle is suitable for casual shirts that do not need ironing after washing.

Enables various fabrics to be washed simultaneously.

Removes solid and protein stain and provide better rinse performance.

Provides less noise and vibration and saves money by using overnight electricity.

Removes efficiently detergent residue in clothes.

This cycle is for large items such as bed cover, pillows, sofa covers, etc.

This cycle is suitable for sports wear such as jogging clothes and running wear.

Enables to wash wool fabrics. (Please use detergent for machinewashable woolens).

This cycle provides fast washing time for small loads and lightly soiled clothes.

Use only drying cycle without washing.

This cycle provides nonstop process from washing to drying at once.

Use for laundy that need rinsing only or to add rinse-added fabric softener to laundry.

Description

Color fast garments (shirts, nightdresses, pajamas, etc) and normally soiled cotton load (underwear).

Polyamide, Acrylic, Polyester.

Various kind of fabrics except special garments. (Silk/delicate, sports wear, dark clothes, wool, Duvet/Curtains).

Lightly soiled baby wear.

Color fast garments (shirts, nightdresses, pajamas, etc) and lightly soiled white cotton (underwear).

Fabrics which will be in direct contact with the skin, e.g. underwear, nappies, towelling, bed linen, pillow and mattress covers

Cotton bedding except special garments (delicates, wool, silk, etc.) with filling: duvets, pillows, blankets, sofa covers with light filling.

Coolmax, Gore-tex, fleece and Sympatex.

Machine washable woolens with pure new wool only.

Colored laundry which is lightly soiled fast.

Wet laundry which need drying only.

A small amount of laundry which can be dried.

Normal fabrics which can be washable.

Fabric type

Proper

Temp.

40°C

(Cold to 95°C)

60°C

(Cold to 60°C)

40°C

(Cold to 60°C)

40°C

(Cold to 40°C)

60°C

(95°C)

40°C

(Cold to 60°C)

40°C

(Cold to 40°C)

30°C

(Cold to 40°C)

40°C

(Cold to 95°C)

Maximum

Load

Rating

Less than

4.5 kg

Less than

5.0 kg

Rating

1 single

size

Less than

3.0 kg

Less than

6.0 kg

Rating

How to use washer

 Drying Program Table

Program Fabric type

Eco Dry

Cupboard Dry

Low Temp.

30 min.

60 min.

120 min.

•

Water Temperature: Select water temperature to suit wash cycles.

Cotton or Linen Fabrics such as cotton towel, t-shirts, linen laundries.

Cotton or Linen Fabrics for ready to ironing. Iron Dry

Easy Care Textiles, Synthetic Fabrics Suitable for Easy care, Mix programm washable clothes

–

Maximum Load

4.5 kg

6.0 kg

4.0 kg

0.5 kg

1.5 kg

3.0 kg

Always follow garment manufacture’s care label or instructions when washing.

•

Set program at "Wash : Cotton Eco 60°C + Intensive + 1400rpm" and "Dry : Eco Dry (First drying cycle load 4.5 kg, Second drying cycle load : 4.5 kg)" for test in accordance with EN50229.

NOTE

• Neutral detergent is recommended.

• The wool cycle features gentle tumbling and low-speed spin for garment care.

• Select maximun selectable spin speed of washing programme to ensure the drying

result.

• Where the amount of laundry to be washed and dried in one programme does not

exceed the maximum weight permitted for the drying programme, washing and drying in one continuous sequence is recommended.

How to use washer

 Extra options

Time

Delay

Cotton

Cotton Eco

Easy Care

Mix

Baby Care

Silent Wash

Skin Care

Duvet

Sports Wear

Wool Quick 30 Dry Only

Wash+Dry

Rinse+Spin

Medic Rinse

Favorite IntensiveProgram

** **

Pre

Wash

Time Save

Rinse

* : This option is automatically included in the cycle and can not be deleted. ** : This option is automatically included in the cycle and can be deleted.

 Operating data

Program Max RPM

Cotton

Cotton Eco

Easy Care

Mix

Baby Care

Silent Wash

Skin Care

Duvet

Sports Wear

Wool Quick 30 Dry Only

Wash+Dry

Rinse+Spin

1400 1400 1000 1400 1000 1000 1400 1000

1400 1400 1400 1400

800 800

Consumption data

Energy (kWh)

970

1170

690 550

1650

620 950 550 360 490 220

Rinse

Hold

Water (l)

85 63 70

59 125 102 105

Dry

* *

How to use washer

■ Control panel

SMARTDIAGNOSIS™ function is available only for the products with a SMARTDIAGNOSIS™ mark.

Additional

program

buttons

LED

display

Power

button

Program

dial

Start/Pause

button

Power

• Press the Power button to turn power on and off.

• To cancel the Time Delay function, the power button should be pressed.

Program dial

• Programs are available according to the laundry type.

• Lamp will light up to indicate selected program.

Start/Pause

• This Start/Pause button is used to start wash cycle or pause the wash cycle.

• If temporary stop of wash cycle is needed, press the Start/Pause button.

• When in Pause, the power is turned off automatically after 4 minutes.

Beep

On/Off

Option

buttons

Additional program

• Use these buttons to select the desired cycle options for the selected cycle.

LED display

• The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.

Options

• This allows you to select an additional cycle and will light when selected.

How to use washer

■ Additional program

Time Delay

You can set a time delay so that the washing machine will start automatically and ﬁnish after a speciﬁed time interval.

NOTE

• The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.

1. Press the Power button.

2. Select a cycle.

3. Touch the Time Delay button and set time

required.

4. Press the Start/Pause button.

Medic Rinse

For best results or for cleaner rinsing. This allows the final rinse to be heated to 40 degrees.

1. Press the Power button.

2. Select a cycle.

3. Press the Medic Rinse button and set time

required.

4. Press the Start/Pause button.

Favorite

Favorite program allows you to store a customized wash cycle for future use.

1. Press the Power button.

2. Select a cycle.

3. Select the course.

(Washing method, number of rinses, spin speed, water temperature etc.)

4. Touch and hold Favorite program button

for 3 seconds.

The Favorite program is now stored for future use.

To reuse the program, select Favorite program and press the Start/Pause.

Pre Wash

If the laundry is heavily soiled, “Pre Wash” course is effective.

1. Press the Power button.

2. Select a cycle.

3. Touch the Pre Wash button.

4. Press the Start/Pause button.

How to use washer

■ Options ■ Other functions

Wash

• Time Save : This option can be used to

reduce the time of a wash program.

• Intensive : If the laundry is normal and

heavily soiled, “Intensive” option is effective.

Rinse

• Rinse+: Add rinse once.

• Rinse Hold : The course is paused until

start button is pressed again when rinse is finished.

Temp.

• By touching the Temp. button the water temperature can be selected.

- Cold

- 30°C, 40°C, 60°C, 95°C

• Water temperature can be selected according to the program.

Spin

Spin only

1. Press the Power button.

2. Touch the Spin button to select RPM.

3. Press the Start/Pause.

NOTE

When you select "No Spin", it will still rotate for a short time with low speed to drain quickly.

• Spin Speed level can be selected by touching 'Spin' button repeatedly.

How to use washer

■ Child Lock

Select this function to lock the buttons on the control assembly to prevent tampering. "Child Lock" can be set only during the washing cycle.

Locking the control panel

1. Touch and hold

3 seconds.

2. A beeper will sound, and ' ' will appear on

the LED display. When the child lock is set, all buttons are locked except the Power button.

NOTE

•

Turning off the power will not reset the child lock function. You must deactivate child lock before you can access any other functions.

Unlocking the control panel

1. Touch and hold

3 seconds.

2. A beeper will sound and the remaining time

for the current programme will reappear on the LED display.

the

Child Lock button for

the

Child Lock button for

■ Beep On / Off

The Beep on/off function can be set only during the washing cycle.

the

1. Press

2. Press the Start/Pause button.

3. Touch and hold the Temp. and Spin button

simultaneously for three seconds to set Beep on/off function.

Once the Beep on/off function is set, the setting is memorized even after the power is turned off.

Power button.

NOTE

•

If you want to turn the Beeper off, simply repeat this process.

How to use washer

■ Tub Clean

Tub Clean is a special cycle to clean the inside of the washing machine. A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly.

1. Remove any clothing or items from the

washer and close the door.

2. Open the dispenser drawer and add Anti

limescale(e.g. Calgon) to the main wash compartment.

3. Close the dispenser drawer slowly. Power On and then touch and hold Tub

4. Clean button for 3 seconds. then “ ” will

be displayed on the LED display.

5. Press the Start/Pause button to start.

6. After the cycle is complete, leave the door

open to allow the washer door opening, flexible gasket and door glass to dry.

NOTE

• Do not add any detergent to the detergent compartments.

• Excessive suds may generate and leak from the washer.

CAUTION

• If there is a child, be careful not to leave the door open for too long.

■ Door Lock & Detecting

“Door Lock” - For safety reasons, the

•

door will lock while machine is in use and the “Door Lock” icon will light up. You can safely open the door after the “Door Lock” icon turns off.

•

While "Detecting" is shown on the

display the washing machine rotates slowly and detects how much laundry is loaded in the drum. It will take a short time.

+ 58 hidden pages