LG F14A8JDH2NH Owner’s Manual [en,de]

MFL67890419

RELEASING THIS DRAWING WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES.

이 도면은 LG전자의 자산으로 불법 유출시 관계법과 회사규정에 의해 처벌됨.

SEC.

WORK

가

BRAND

나

MODEL

다

P/NO.

PRINTING DEGREE

MATERIAL AND PRINTING DESCRIPTION

LG MODEL 명

SUFFIX

LANGUAGE

PAGE

REMARK

PIRME + POST DD HYBRID

F14A8JDH(0-9)N

(바이어 모델명)

MFL67890419

SNOW WHITE 80g OFFSET 인쇄

F14A8JDHK(0-9)H

A**QEDG

영어-독일어

(LED, 600 , COMBO )-PJT

DATA 작업처 : 가람기획 양산처 : 국제인쇄

<< 주기 >>

가

1. 재질, 인쇄방법, 인쇄도수, 외곽치수등은 작업표에 준한다.

2. 인쇄내용, 문자크기 및 형상, 선의 굵기 등은 설계에서 제시된 FILM에 준함.

3. 외곽치수는 절단후 치수임.

4. 양산전에 설계 한도를 득할 것.

2 5 7

가

5. 본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를 만족할 것

REV. NO.

기호

REVISION DESCRIPTION

변경 사항

나

P/NO. 다

182 182

APPROVED

REF. NO.

시방 번호

년/월/일

DATE

PREPARED

시방자

승인자

<< NOTES >>

1. Material, printing and exterier size are refer to work tables.

2. Printing, text size and line are based on LG design film.

3. Exterier size on the drawing is cutting line.

4. Before product controlled by criteria sam p le.

5. The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)and details

should comply with LG stand a rd of LG(63)-A-5501-34

DR COMPLETED

도면 DR 완료

완료일 :

TRIG.

MODELING

조 보 경

15.08.24 15.08.24

신 솔

15.08.24

LG 전자 (주)

UNIT SCALE

REVIEWED DESIGNED

CHECKED APPROVED

전 종 묵

RELATED DWG.

LG Electronics Inc.

김 영 수

15.08.24

PDF

ILLUSTRATOR

MANUAL,OWNER’S

T L E

DRUM-EXPORT 1/1

DWG. No.

MFL67890419

www.lg.com

OWNER’S MANUAL

WASHING MACHINE

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.

MFL67890419

F14A8JDH(0-9)NH

ENGLISH DEUTSCH

TABLE OF CONTENTS

This manual is produced for a group of products and may contain images or content different from the model you purchased.

This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTIONS ......................................03

Important Safety Instructions ............................................................... 05

INSTALLATION .......................................................08

Specifications ......................................................................................08

Accessories .........................................................................................08

Installation Place Requirements .......................................................... 09

Unpacking and Removing Shipping Bolts ...........................................10

Using Non-Skid Pads (Optional).......................................................... 11

Wooden Floors (Suspended Floors) .................................................... 11

Leveling the Washing Machine ............................................................12

Connecting Inlet Hose .........................................................................12

Installation of Drain Hose ....................................................................15

Electrical Connections (In the UK Only) .............................................. 15

OPERATION ...........................................................16

Using the Washing Machine ................................................................16

Sorting Iaundry ....................................................................................17

Adding Cleaning Products ................................................................... 18

Control Panel ....................................................................................... 20

Programme Table ................................................................................21

Option Cycle ........................................................................................ 26

Trocknen (Dry) (Optional) ....................................................................28

Using Smart Function (Optional) ......................................................... 30

MAINTENANCE ......................................................31

Cleaning your Washing Machine .........................................................31

Cleaning the Water Inlet Filter .............................................................31

Cleaning the Drain Pump Filter ...........................................................32

Cleaning the Dispenser Drawer...........................................................33

Trommelreinigung (Tub Clean) (Optional) ...........................................33

Caution on Freezing During Winter ..................................................... 34

Using the Smart Diagnosis™ Function ...............................................36

TROUBLESHOOTING ............................................37

Diagnosing Problems ..........................................................................37

Error Messages ...................................................................................39

WARRANTY ............................................................41

OPERATING DATA .................................................44

ENGLISH

SAFETY INSTRUCTIONS

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the product.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

This symbol is displayed to the indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

- This indicates that the failure to follow the instructions

can cause serious injury or death.

CAUTION

- This indicates that the failure to follow the instructions

can cause the minor injury or damage the product.

To reduce the risk of re, electric shock, or injury to persons when using

your product, basic safety precautions should be followed, including the following.

WARNING

CHILDREN IN THE HOUSEHOLD

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

For use in Europe:

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Children of less than 3 years should be kept away unless continuously supervised.

GROUNDING REQUIREMENTS

For your safety, the information in this manual must be followed to

minimize the risk of re, explosion, or electric shock, or to prevent

property damage, injury to persons, or death.

WARNING

•This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

•This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

•Improper connection of the equipment-grounding conductor can result in risk of electric

shock. Check with a qualied electrician or service person if you are in doubt as to

whether the appliance is properly grounded.

•Do not modify the plug provided with the appliance. If it does not t the outlet, have a

proper outlet installed by a qualied electrician.

DISPOSAL OF YOUR OLD APPLIANCE

1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

2. The correct disposal or your old appliance will help prevent potential negative consequences for the environment and human health.

3. For more detailed information about disposal of your old appliance, please

contact your city ofce, waste disposal service or the shop where you

purchased the product.

ENGLISH

Important Safety Instructions

To reduce the risk of re, electric shock, or injury to persons when using

your product, basic safety precautions should be followed, including the following.

WARNING

Operation

•Do not use a sharp object like drill or pin to press or separate an operation unit. It can cause the electric shock or injury.

•Only an authorized repair person from LG Electronics service centre should disassemble, repair, or modify the product. Improper service may cause

injury, electric shock or re.

•Do not spray the water inside or outside the product to clean it. Water can damage the insulation, causing electric

shock or re.

•Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc. Improper use can cause

re or explosion.

•Do not put living animals, such as pets into the product. It may cause injury.

•Do not leave this appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.

Installation

•Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. It can cause electric shock or injury.

•This appliance is heavy. Two or more people may be needed to install and move the appliance. Failure to do so can result in injury.

•Store and install this appliance where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to do so can result in leakage.

•Tighten the drain hose to avoid separation. Splashing of water may cause electric shock.

•If the supply cord is damaged, it must be replaced by the manufacturer or

its service agents or similarly qualied

person in order to avoid a hazard.

•The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.

•Never reach into this appliance while it is operating. Wait until the drum has completely stopped. Failure to do so may result in injury.

•Do not put in, wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, vegetable oil, cooking oil, etc.). Improper

use can cause re or explosion.

•In case of ood, stop using the product and contact the LG Electronics service centre. Contact with water can cause electric shock.

•Do not push down the door excessively, when the appliance door is open. Doing so may topple over the appliance and it can cause the injury.

•Use new hose-sets supplied with the appliance. Old hose-sets should not be reused. Water leakage may cause property damage.

•Do not touch the door during steam cycles, drying or high-temperature washing. The door surface can become very hot. Allow the door lock to release before opening the door. Failure to do so may result in injury.

•Do not use inammable gas and combustible substances (benzene, gasoline, thinner, petroleum, alcohol, etc.) around the product. It may cause

explosion or re.

•If the drain hose or inlet hose is frozen during winter, use it only after thawing.

Freezing may cause re or electric

shock, and frozen parts may cause product malfunction or reduction in product life span.

•Keep all washing detergents, softener and bleach away from children. These products contain poisonous materials.

•Do not plug multiple products into multiple socket-outlets or extension

cords. This can cause re.

•Remove the power plug when you clean the product. Not removing the plug may result in electric shock or injury.

•Do not touch the power plug with wet hands. It can cause the electric shock or injury.

•When pulling out the power plug from an outlet, hold the power plug, not the cable. Damage of the cable can cause the electric shock or injury.

•Do not bend the power cable excessively or place a heavy object on top of it. Damage of the power cable

can cause electric shock or re.

ENGLISH

Disposal

•Before discarding an old appliance, unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.

•Dispose of the packaging material (such as vinyl and styrofoam) away from children. The packaging material can suffocate a child.

•Remove the door to the washing compartment before this appliance is removed from service or discarded to avoid the danger of children or small animals getting trapped inside. Failure to do so can result in serious injury to persons or death.

Technical Safety for Using the Tumble Dryer

•Do not dry unwashed items in the appliance.

•Items that have been soiled with substances such as cooking oil, vegetable oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the appliance.

•Fabric softeners or other similar products should be used according to the fabric softener instructions.

•Remove all objects from pockets such as lighters and matches.

•Never stop this appliance before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

•This appliance is not to be used if industrial chemicals have been used for cleaning.

•Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows

tted with foam rubber pads should not

be dried in this appliance.

INSTALLATION

Specications

Transit bolts

Power plug

Drawer

Control panel

Drum

Door

Drain hose

Drain plug

Drain pump lter

Cover cap

(Location may vary depending on products)

Adjustable feet

•Power supply : 220‒240 V~, 50 Hz

•Size : 600 mm (W) x 640 mm (D) x 850 mm (H)

•Product weight : 71 kg

•Wash Capacity : 10.5 kg (Wash) / 7 kg (Dry)

•Permissible water pressure : 0.1‒1.0 MPa (1.0‒10.0 kgf / cm

)

•Appearance and specications may vary without notice to improve the quality of the product.

Accessories

Inlet hose (1EA)

(Option: Hot (1EA))

Spanner Caps for covering shipping

bolt holes

Anti–slip sheets (2EA)

(Optional)

ENGLISH

Installation Place Requirements

Location

Level oor : Allowable slope under the entire washing machine is 1°.

Power outlet : Must be within 1.5 meters of either side of the location of the washing machine.

•Do not overload the outlet with more than one appliance.

Additional Clearance : For the wall, 10 cm: rear /2 cm: right & left side

•Do not place or store laundry products on top of the washing machine at any time.

•These products may damage the nish or controls.

Positioning

•Install the washing machine on a at hard oor.

•Make sure that air circulation around the washing machine is not impeded by carpets, rugs, etc.

•Never try to correct any unevenness in the oor with pieces of wood, cardboard or similar materials under the washing machine.

•If it is impossible to avoid positioning the washing machine next to a gas cooker or coal burning insulation (85x60 cm) covered with aluminum foil on the side facing the cooker or stove must be inserted between the two appliances.

•Do not install your washing machine in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

•Please ensure that when the washing machine is installed, it is easily accessible for an engineer in the event of a breakdown.

•With the washing machine installed, adjust all four feet using the transit bolt spanner provided to ensure the appliance is stable, and a clearance of approximately 20 mm is left between the top of the washing machine and the underside of any work-top.

•This equipment is not designed for maritime use or for use in mobile installations such as caravans, aircraft etc.

Electrical Connection

•Do not use an extension cord or double adapter.

•Always unplug the washing machine and turn off the water supply after use.

•Connect the washing machine to an earthed socket in accordance with current wiring regulations.

•The washing machine must be positioned so that the plug is easily accessible.

•Repairs to the washing machine must only be carried

out by qualied personnel. Repairs carried out by

inexperienced persons may cause injury or serious malfunctioning. Contact your local service centre.

•If the washing machine is delivered in winter and temperatures are below freezing, place the washing machine at room temperature for a few hours before putting it into operation.

Unpacking and Removing Shipping Bolts

Lift the washing machine off the foam base.

•After removing the carton and shipping material, lift the washing machine off the foam base. Make sure the tub support comes off with the base and is not stuck to the bottom of the washing machine.

•If you must lay the washing machine down to remove the carton base, always protect the side of the washing machine and lay it carefully on its side. DO NOT lay the washing machine on its front or back.

Tub Support

(Optional)

Carton base

Remove the bolt assemblies.

•Starting with the bottom two shipping bolts, use the spanner (included) to fully loosen all shipping bolts by turning them counterclockwise. Remove the bolt assemblies by wiggling them slightly while pulling them out.

Retainer

Shipping

bolt

Install the hole caps.

•Locate the hole caps included in the accessory pack and install them in the shipping bolt holes.

Cap

NOTE

•Save the bolt assemblies for future use. To prevent damage to internal components, DO NOT transport the washing machine without reinstalling the shipping bolts.

•Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washing machine. The cord is secured to the back of the washing machine with a shipping bolt to help prevent operation with shipping bolts in place.

ENGLISH

Using Non-Skid Pads (Optional)

If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, install the non-skid pads under the leveling feet and adjust the level.

Clean the oor to attach the non-skid pads.

•Use a dry rag to remove and clean foreign objects and moisture. If moisture remains, the non-skid pads may slip.

Adjust the level after placing the washing machine in the installation area.

Place the adhesive side of the non-skid pad on the

oor.

•It is most effective to install the non-skid pads

under the front legs. If it is difcult to place the

pads under the front legs, place them under the back legs.

This side up

Adhesive side

Ensure the washing machine is level.

•Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.

Wooden Floors (Suspended Floors)

•Wooden oors are particularly susceptible to vibration.

•To prevent vibration we recommend you place rubber cups at least 15 mm thick of the each foot of the

washing machine, secured to at least two oor beams

with screws.

Rubber Cup

•If possible install the washing machine in one of the

corners of the room, where the oor is more stable.

•Fit the rubber cups to reduce vibration.

•You can obtain rubber cups (p/no.4620ER4002B) from the LG Service Centre.

NOTE

•Proper placement and leveling of the washing machine will ensure long, regular, and reliable operation.

•The washing machine must be 100% horizontal

and stand rmly in position.

•It must not ‘Seesaw’ across corners under the load.

•The installation surface must be clean, free from

oor wax and other lubricant coatings.

•Do not let the feet of the washing machine get wet. Failure to do so may cause vibration or noise.

Leveling the Washing Machine

If the oor is uneven, turn the adjustable feet as required

(Do not insert pieces of wood etc. under the feet). Make

sure that all four feet are stable and resting on the oor

and then check that the appliance is perfectly level (Use a spirit level).

•Once the washing machine is level, tighten the lock nuts up towards the base of the washing machine. All lock nuts must be tightened.

Raise

Lock Nut

Lower

Tighten all 4

locknuts securely

•Diagonal Check When pushing down the edges of the washing machine top plate diagonally, the washing machine should not move up and down at all (Check both directions). If the washing machine rocks when pushing the machine top plate diagonally, adjust the feet again.

NOTE

•Timber or suspended type ooring may contribute to excessive vibration and unbalance.

•If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.

Connecting Inlet Hose

•Water supply pressure must be between 0.1 MPa and

1.0 MPa (1.0‒10.0 kgf/cm

•Do not strip or crossthread when connecting inlet hose to the valve.

•If the water supply pressure is more than 1.0 MPa, a decompression device should be installed.

•Periodically check the condition of the hose and replace the hose if necessary.

Checking Rubber Seal Inlet Hose

Two rubber seals are supplied with the water inlet hoses. They are used for preventing water leaks. Make sure the

connection to taps is sufciently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

ENGLISH

Connecting Hose to Water Tap

Connecting screw-type hose to tap with thread

Screw the hose connector onto the water supply tap.

Connecting screw-type hose to tap without thread

Loose the four xing screws.

Upper

connector

Rubber seal

Fixing screw

Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection.

Tighten the four xing screws.

Push the inlet hose vertically upwards so that the rubber seal within the hose can adhere completely to the tap and then tighten it by screwing it to the right.

Plate

Inlet hose

Connecting one touch type hose to tap without thread

Unscrew the adapter ring plate and loose the four

xing screws.

Ring plate

Remove the guide plate if the tap is too large to t

the adapter.

Guide plate

Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection.

Tighten the adapter ring plate and the four xing

screws.

Pull the connector latch plate down, push the inlet hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place.

Latch plate

NOTE

•After connecting the inlet hose to the water

tap, turn on the water tap to ush out foreign

substances (dirt, sand, sawdust, etc.) in the water lines. Let the water drain into a bucket, and check the water temperature.

Connecting Hose to Washing Machine

Make sure that there are no kinks in the hose and that they are not crushed.

When your washing machine has two valves.

•The Inlet hose with the red connector is for the hot water tap.

NOTE

•After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of tap for the water supply. In case the tap is square or too big, remove the guide plate before inserting the tap into the adaptor.

Using the horizontal tap

Horizontal tap

Extension tap

Square tap

ENGLISH

Installation of Drain Hose

•The drain hose should not be placed higher than 100

cm above the oor. Water in the washing machine

may not drain or may drain slowly.

•Securing the drain hose correctly will protect the oor from damage due to water leakage.

•If the drain hose is too long, do not force it back into the washing machine. This will cause abnormal noise.

about 100 cm

about 145 cm

max. 100 cm

about 105 cm

•When installing the drain hose to a sink, secure it tightly with string.

•Securing the drain hose correctly will protect the oor from damage due to water leakage.

Laundry tub

Hose

retainer

max. 100 cm

Tie strap

max. 100 cm

Electrical Connections (In the UK Only)

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow: Earth

Blue: Neutral

Brown: Live

This appliance must be earthed.

Green and

Yellow (Earth)

Brown (Live)

Blue (Neutral)

Fuse

Cord grip

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The green and yellow wire must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol (

) or coloured Green or Green

and Yellow.

The blue wire must be connected to the terminal which is marked with the letter N or coloured Black.

The brown wire must be connected to the terminal which is marked with the letter L or coloured Red.

If a 13 amp (BS 1363) plug is used, t a 13 amp BS

1362 fuse.

OPERATION

Using the Washing Machine

Before the rst wash, select a cycle (Cotton 60 °C, add

a half load of detergent), allow the washing machine to wash without clothing. This will remove residue and water from the drum that may have been left during manufacturing.

Sort laundry and load items.

•Sort laundry by fabric type, soil level, colour and load size as needed. Open the door and load items into the washing machine.

Add cleaning products and/or detergent and softener.

•Add the proper amount of detergent to the detergent dispenser drawer. If desired, add bleach or fabric softener to the appropriate areas of the dispenser.

Turn on the washing machine.

•Press the Power button to turn ON the washing machine.

Choose the desired washing cycle.

•Press the cycle button repeatedly or turn the cycle selector knob until the desired cycle is selected.

Begin cycle.

•Press the Start/Pause button to begin the cycle.

The washing machine will agitate briey without

water to measure the weight of the load. If the Start/Pause button is not pressed within 5 minutes, the washing machine will shut off and all settings will be lost.

End of cycle.

•When the cycle is nished, a melody will sound. Immediately remove your clothing from the washing machine to reduce wrinkling. Check around the door seal when removing the load for small items that may be caught in the seal.

ENGLISH

Sorting Iaundry

Look for a care label on your clothes.

•This will tell you about the fabric content of your garment and how it should be washed.

•Symbols on the care labels.

Wash temperature

Normal machine wash

Permanent press

Delicate

Hand wash

Do not wash

Sorting laundry.

•To get the best results, sort clothes into loads that can be washed with the same wash cycle.

•Different fabrics need to be washed at varying temperatures and spin speeds.

•Always sort dark colours from pale colours and whites. Wash separately as dye and lint transfer can occur causing discolouration of white and pale garments. If possible, do not wash heavily soiled items with lightly soiled ones.

– Soil (Heavy, Normal, Light)

Separate clothes according to amount of soil.

– Colour (White, Lights, Darks)

Separate white fabrics from coloured fabrics.

– Lint (Lint producers, Collectors)

Wash lint producers and lint collectors separately.

Caring before loading.

•Combine large and small items in a load. Load

large items rst.

•Large items should not be more than half the total wash load. Do not wash single items. This may cause an unbalanced load. Add one or two similar items.

•Check all pockets to make sure that they are empty. Items such as nails, hair clips, matches, pens, coins and keys can damage both your washing machine and your clothes.

•Close zippers, hooks and strings to make sure that these items don’t snag on other clothes.

•Pre-treat dirt and stains by brushing a small amount of detergent dissolved water onto stains to help lift dirt.

•Check the folds of the exible gasket (gray) and remove any small articles.

•Check inside the drum and remove any items from a previous wash.

•Remove any clothing or items from the exible gasket to prevent clothing and gasket damage.

Adding Cleaning Products

Detergent Dosage

•Detergent should be used according to the instruction of the detergent manufacturer and selected according to type, colour, soiling of the fabric and washing temperature.

•If too much detergent is used, too many suds can occur and this will result in poor washing results or cause heavy load to the motor.

•If you wish to use liquid detergent follow the guidelines provided by the detergent manufacturer.

•You can pour liquid detergent directly into the main detergent drawer if you are starting the cycle immediately.

•Do not use liquid detergent if you are using Time Delay, or if you have selected Pre Wash, as the liquid may harden.

•If too many suds occur, reduce the detergent amount.

•Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. For best results, avoid oversudsing.

•Refer to the label of the clothes, before chooseing the detergent and water temperature:

•When using the washing machine, use designated detergent for each type of clothing only:

– General powdered detergents for all types of fabric

– Powdered detergents for delicate fabric

– Liquid detergents for all types of fabric or

designated detergents only for wool

•For better washing performance and whitening, use detergent with the general powdered bleach.

•Detergent is ushed from the dispenser at the beginning of the cycle.

NOTE

•Do not let the detergent harden. Doing so may lead to blockages, poor rinse performance or odour.

•Full load : According to manufacturer’s recommendation.

•Part load : 3/4 of the normal amount

•Minimum load : 1/2 of full load

Adding Detergent and Fabric Softener

Adding detergent

•Main wash only →

•Pre wash+Main wash →

NOTE

•Too much detergent, bleach or softener may

cause an overow.

•Be sure to use the appropriate amount of detergent.

Adding fabric softener

•Do not exceed the maximum ll line. Overlling can cause early dispensing of the fabric softener, which may stain clothes. Close the dispenser drawer slowly.

ENGLISH

•Do not leave the fabric softener in the detergent drawer for more than 2 days (Fabric softener may harden).

•Softener will automatically be added during the last rinse cycle.

•Do not open the drawer when water is being supplied.

•Solvents (benzene, etc) should not be used.

NOTE

•Do not pour fabric softener directly on the clothes.

Adding water softener

•A water softener, such as Anti-limescale (e.g. Calgon) can be used to cut down on the use of detergent in extremely hard water areas. Dispense according to

the amount specied on the packaging. First add

detergent and then the water softener.

•Use the quantity of detergent required for soft water.

Using tablet

Open the door and put tablets into the drum.

Load the laundry into the drum and close the door.

Control Panel

Power button

•Press the Power button to turn the washing machine on.

•To cancel the Time Delay function, the Power button should be pressed.

Start/Pause button

•This Start/Pause button is used to start the wash cycle or pause the wash cycle.

•If a temporary stop of the wash cycle is needed, press the Start/Pause button.

Display

•The display shows the settings, estimated time remaining, options, and status messages. When the product is turned on, the default settings in the display will illuminate.

•The display shows estimate time remaining. While the size of the load is being calculated automatically, blinking

or ‘Detecting’

appears.

Programme dial

•Programmes are available according to laundry type.

•Lamp will light up to indicate the selected programme.

Options

•This allows you to select an additional cycle and will light when selected.

•Use these buttons to select the desired cycle options for the selected cycle.

ENGLISH

Programme Table

Washing Programme

Programme Description Fabric Type

Proper

Temp.

Maximum

Load

Koch-/

Buntwäsche

(Cotton)

Provides better performance by combining various drum motions.

Coloured fast garments (shirts, nightdresses, pajamas, etc) and normally soiled cotton load (underwear).

40°C

(Cold to

95°C)

Rating

Baumwolle+

(Cotton

Large)

Provides optimised washing performance for large amount of laundry with less energy consumption.

60°C

(Cold to

60°C)

Pegeleicht

(Easy Care)

This cycle is suitable for casual shirts that do not need ironing after washing.

polyamide, acrylic, polyester

40°C

(Cold to

60°C)

4.0 kgMix

(Mix)

Enables various fabrics to be washed simultaneously.

Various kind of fabrics except special

garments (silk/delicate, sports wear, dark clothes, wool, duvet/curtains).

40°C

(Cold to

40°C)

Allergy Care

(Allergy Care)

Helps to remove allergens such as house mites, pollen, and cat fur.

cotton, underwear, pillow covers, bed sheets, baby wear

60 °C

Direkt

Tragbar

(Direct Wear)

This cycle provides washing to drying within 80mins at once for light soiled

1‒3 shirts.

cotton mixed, polyester mixed dress shirts, blouses

20 °C

3 items

Steam

Refresh

(Steam

Refresh)

Helps to remove wrinkles within 20mins with steam (Clothes may be wet. You can put them on after hang out to dry

for 10‒30min).

cotton mixed, polyester mixed dress shirts, blouses

choice

Bettdecken

(Duvet)

This cycle is for large items such as bed covers, pillows, sofa covers, etc.

Cotton bedding except special garments (delicates, wool, silk, etc.)

with lling: duvets, pillows, blankets, sofa covers with light lling

40°C

(Cold to

40°C)

1 single size

Sportswear

(Sports Wear)

This cycle is suitable for sports wear such as jogging clothes and running wear.

coolmax, gore-tex, eece and

sympatex

3.0 kg

Kurz 30 Min.

(Quick 30)

This cycle provides a fast washing time for small loads and lightly soiled clothes.

Lightly soiled colour laundry.

20°C

(Cold to

40°C)

Programme Description Fabric Type

Proper

Temp.

Maximum

Load

Waschen +

Trocknen

(Wash+Dry)

This cycle provides a nonstop process of washing and drying in the same cycle.

A small amount of laundry which can be dried.

40°C

(Cold to

95°C)

7.0 kg

Schonend/

Wolle

(Gentle Care)

This cycle is for hand and machine washable delicate clothes such as washable wool, lingerie, dresses etc. (Use detergent for machine washable woolens).

wool, hand washable clothes, delicate, easily damaged laundry

20°C

(Cold to

20°C)

1.5 kg

Flecken

(Stain Care)

Wash off several kinds of stain such as wine, juice, dirt, etc. (Water temperature is increased step by step for washing various stains.)

cotton blended fabrics, NO delicate clothes

40°C

(40°C to

60°C)

3.0 kg

Download/

Neu

(Download

Cycle)

For downloadable cycles. If you did not download any cycles, the default is Rinse+Spin.

•Water Temperature: Select the appropriate water temperature for chosen wash cycle. Always follow garment manufacturer’s care label or instructions when washing.

NOTE

•Neutral detergent is recommended.

ENGLISH

Drying Programme

Programme Description Fabric Type Maximum Load

Eco

(Eco)

A special cycle to reduce water usage during the dry cycle.

Cotton or linen fabrics such as cotton towels, t-shirts, and linen laundries.

Rating

Schranktrocken

(Cupboard)

For cottons. Select this cycle to reduce cycle time and energy usage during the dry cycle.

Normal Eco

(Normal Eco)

For energy dry cycle.

Bügeltrocken

(iron)

For easy iron, nish drying in damp

condition.

Cotton or linen fabrics, ready to iron at the end of cycle.

Rating

Niedrige Temp.

(Low Temp.)

For less clothes damage, it dries in low temperature.

easy care textiles, synthetic fabrics suitable for Easy Care, Mix programme washable clothes

Rating

Time 30 min.

You can change the drying time according to the maximum load.

cotton, towel

0.5 kg

Time 60 min. 1.5 kg

Time 120 min. 3.0 kg

•Set programme at ‘Wash: Baumwolle+ 60 °C+1400 rpm’ and ‘Dry: Normal Eco (First drying cycle load: 5.0 kg, Second drying cycle load: 5.5 kg)’ to test in accordance with EN50229.

NOTE

•Select maximum selectable spin speed of washing programme to ensure drying results.

•Where the amount of laundry to be washed and dried in one programme does not exceed the maximum weight permitted for the drying programme, washing and drying in one continuous sequence is recommended.

Extra Options

Programme

Startzeit-

vorwahl

(Time

Delay)

Dampf

Waschen

(Steam

Wash)

Dampf

Aufweichen

(Steam

Softener)

Favorit

(Favorite)

Vor-

wäsche

(Pre

Wash)

Zeit

sparen

(Time Save)

Intensiv

(Intensive)

Spülen+ (Rinse+)

Trocknen

(Dry)

Koch-/

Buntwäsche

(Cotton)

● ● ● ● ● ● ● ● ●

Baumwolle+

(Cotton Large)

● ● ● ● ● ● ● ●

Pegeleicht

(Easy Care)

● ● ● ● ● ● ● ● ●

Mix (Mix)

● ● ● ● ● ● ● ● ●

Allergy Care

(Allergy Care)

● ●* ● ● ● ●

Direkt Tragbar

(Direct Wear)

● ● ●*

Steam Refresh

(Steam Refresh)

●* ●

Bettdecken

(Duvet)

● ● ● ● ● ●

Sportswear

(Sports Wear)

● ● ● ● ●

Kurz 30 Min.

(Quick 30)

● ● ● ● ● ●

Schonend/

Wolle

(Gentle Care)

● ● ●

Waschen +

Trocknen

(Wash+Dry)

● ● ● ● ● ● ● ●*

Flecken

(Stain Care)

● ● ●* ● ●

* : This option is automatically included in the cycle and can not be deleted.

ENGLISH

Operating Data

Programme Max RPM

Koch-/Buntwäsche (Cotton)

1400

Baumwolle+ (Cotton Large)

1400

Pegeleicht (Easy Care)

1000

Mix (Mix)

1400

Allergy Care (Allergy Care)

1400

Direkt Tragbar (Direct Wear)

1000

Steam Refresh (Steam Refresh)

Bettdecken (Duvet)

1000

Sportswear (Sports Wear)

800

Kurz 30 Min. (Quick 30)

1400

Schonend/Wolle (Gentle Care)

800

Waschen + Trocknen

(Wash+Dry)

1400

Flecken (Stain Care)

1400

Option Cycle

Startzeitvorwahl (Time Delay)

You can set a time delay so that the washing machine

will start automatically and nish after a specied time

interval.

Press the Power button.

Select a washing programme.

Press the Startzeitvorwahl button and set time required.

Press the Start/Pause button.

NOTE

•The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.

Dampf (Steam) (Optional)

Steam Wash features enhanced washing performance with low energy consumption. Steam Softener sprays steam after a spinning cycle to reduce creases and

make the laundry uffy.

Press the Power button.

For Steam Wash option, select steam cycles. For Steam Softener option, select Koch-/Buntwäsche

or Baumwolle+, Mix, Pegeleicht.

The following cycle is selected depending on the number of times you press the Dampf button.

•Once: Steam Wash

•Twice: Steam Softener

•Three times: Steam Wash and Steam Softener

Press the Start/Pause button.

Dampf Waschen (Steam Wash) ( )

•For heavily stained clothes, underwear or baby clothes.

•Available with the Koch-/Buntwäsche, Baumwolle+,

Mix, Pegeleicht, Bettdecken, Allergy Care, Steam

Refresh, Waschen + Trocknen cycles.

•Do not use Steam Wash for easily discoloured clothes and delicates such as wool, silk.

Dampf Aufweichen (Steam Softener) ( )

•Good to soften and uff fabrics after air drying.

•Available with the Koch-/Buntwäsche, Baumwolle+,

Mix, Pegeleicht cycles.

•Do not use Steam Softener for easily discoloured clothes and delicates such as wool, silk.

•Depending on the kind of fabric, softening performance may be different.

ENGLISH

Favorit (Favorite)

Favorite programme allows you to store a customized wash cycle for future use.

Press the Power button.

Select a washing programme.

Select the cycle (Washing method, number of rinses, spin speed, water temperature etc.).

Press and hold the Favorit button for 3 seconds.

The favorite programme is now stored for future use.

To reuse the programme, select favorite programme and press the Start/Pause button.

Vorwäsche (Pre Wash)

If the laundry is heavily soiled, the Pre Wash cycle is recommended.

Press the Power button.

Select a washing programme.

Press the Vorwäsche button.

Press the Start/Pause button.

Waschen (Wash)

Zeit sparen (Time Save)

This option can be used to reduce the time of a wash programme. It is best used on lightly soiled loads.

Intensiv (Intensive)

If the laundry is normal and heavily soiled, the Intensiv option is effective.

Temp. (Temp.)

The Temp. button selects the wash and rinse temperature combination for the selected cycle. Press this button until the desired setting is lit. All rinses use cold tap water.

•Select the water temperature suitable for the type of load you are washing. Follow the garment fabric care labels for best results.

Spülen (Rinse)

Spülen+ (Rinse+)

Add rinse once.

Spülstop (Rinse Hold)

The cycle is paused until start button is pressed again

when rinse is nished.

Schleudern (Spin)

•Spin speed level can be selected by pressing the Schleudern button repeatedly.

•Spin Only

Press the Power button.

Press the Schleudern button to select RPM.

Press the Start/Pause button.

NOTE

•When you select ‘No Spin’, it will still rotate for a short time to drain quickly.

+ 65 hidden pages