LG F1480QDS, F1080QDS, F1280QDS User Manual

OWNER’S MANUAL

WASHING MACHINE

F1480QDS(1~9) F1280QDS(1~9) F1080QDS(1~9)

P/No. MF L6 32 88 72 3

Please read this manual carefully before operating your washing machine and retain it for future reference.

ontents

Contents....................................2

Product features.......................3

Warnings

Important safety instructions .................4

Save these instructions.........................4

Specifications...........................5

Installation

Removing packing ................................6

Removing transit bolts ..........................6

Installation place requirements .............7

Connecting water supply hose..............9

Installation of drain hose .....................11

Leveling...............................................12

How to use washer

Operating washing machine ...............14

Care before washing...........................15

Washing program table.......................16

Extra options .......................................17

Operating data ....................................18

Control panel.......................................19

Additional program..............................20

- Time Delay........................................20

- Steam Wash .....................................20

- Favorite.............................................20

- Pre Wash ..........................................20

Options................................................21

- Option ...............................................21

- Rinse ................................................21

- Temp. ...............................................21

Other functions....................................21

- Rinse + Spin .....................................21

- Spin Only ..........................................21

- Refresh Cycle ...................................21

Child Lock ...........................................22

Beep On/Off ........................................22

Tub Clean ...........................................23

Door Lock & Detecting ........................23

Thank you for buying a LG Fully Automatic Washing Machine.

Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance. Retain it for future reference.

Recode the model and serial number of your washing machine.

Model No. Serial No. Date of Purchase

Adding detergent

Adding detergent and fabric softener..24

Maintenance

The water lnlet filter.............................26

The drain pump filter ...........................27

Dispenser drawer................................28

The washing drum ..............................29

Cleaning your washer .........................29

Cold conditions ...................................29

Trouble shooting guide

Diagosing problems ............................30

Error messages...................................32

Terms of warranty ..................33

ˆ¡…–¯ˆ ¿„

Inverter Direct Drive system

The advanced Brushless DC motor directly drives the drum without belt and pulley.

Low noise speed control system

By sensing the amount of load and balance, it evenly distributes load to minimize the spinning noise level.

Child Lock

The Child Lock prevents children from pressing any button to change the settings during operation.

More economical with Intelligent Wash system

Intelligent Wash System detects the size of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.

Built-in heater

Internal heater automatically heats the water to the best temperature on selected cycles.

Protection against creases

With the alternating rotation of the drum, creasing is minimized.

6 motion

Washer is able to perform various drum actions or a combination of different actions depending on the wash program selected. Combined with a controlled spin speed and the ability of the drum to rotate both left and right, the wash performance of the machine is greatly improved, giving you perfect results every time.

roduct Features

arnings

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE

WARNING!

• Before installation, check exterior damages. If it has, do not install.

• Do not install or store the washer where it will be exposed to the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.

• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.

• The appliance is not intended for use by young children or infirm persons without supervision. Do not allow children to play on, with, or inside this or any other appliance.

• Keep small animals away from the appliance.

• Do not leave the washer door open. An open door could entice children to hang on the door or crawl inside the washer.

• Never reach into washer while it is moving. Wait until the drum has completely stopped.

• The laundry process can reduce the flame retardant of fabrics.

• To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) which may ignite or explode. Oil may remain in the tub after a whole cycle resulting in fire during drying.

So, do not load oiled clothes.

• Do not slam the washer door closed or try to force the door open when locked. This could result in damage to the washer.

• When the machine runs high temperature, the front door may be very hot. Don’t touch it.

• To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.

• When unplugging power cord, do not pull out by grasping the cord. Otherwise, the power cord may be damaged.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

• Before discarding an old machine unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.

• When a product was under water, Please call service center. The risk of electric shock and fire.

• Appliance connected to the water mains using new hose-sets and old hose-sets not be reused.

• To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property, personal injury or death.

• Do not push down the door excessively, when washer door open. This could topple over the washer.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.

• Do not use an adapter or otherwise defeat the grounding plug.

• If you don’t have the proper outlet, consult an electrician.

IMPORTANT SAFETY INSTRUCTIONS

WARNING : To reduce the risk of fire, electric shock, or injury to persons when using

the washer, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

WARNING :

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with

a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

■ Name : Front loading washing machine

■ Power supply : 220 - 240 V~, 50 Hz

■ Size : 600 mm(W)

590 mm(D) 850 mm(H)

■ Weight : 66 kg

■ Max.Watt : 2100W (Wash) / 1100W (Steam)

■ Wash capacity : 7 kg

■ Water consumption : 49 (7 / kg)

■ Permissible water pressure : 100 ~ 1000 kPa (1.0 ~ 10.0 kgf / cm

)

The appearance and specifications may vary without notice to improve the quality of the unit.

pecifications

란제리

■

Accessories

Drawer

(For detergent and

fabric softener)

Drain hose

Transit bolts

Power plug

Control panel

Drain pump filter

Lower cover cap

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid a hazard.

Drum

Door

Drain plug

Adjustable feet

nstallation

■ Removing packing

Base Packing

Washer

Spanner

1. Remove the cardboard box and

styrofoam packing.

2. Lift the washing machine and remove

the base packing.

3. Remove the tape securing the power

supply cord and drain hose.

4. Remove the inlet hose from the drum.

1. Unscrew the 4 bolts with

the spanner supplied.

2. Take out the 4 bolts along with the

rubber bungs by slightly twisting the bung.

3. Close the holes with the caps supplied.

Keep the transit bolts for future use.

To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. If they are not removed, it may cause heavy vibration, noise and malfunction.

■ Removing transit bolts

Keep the spanner in base packing for leveling.

Transit bolt

Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children.

Warning

nstallation

Laundry

Tub

Washer

approx.

2cm

Drain Hose

• Level floor :

Allowable slope under entire washer is 1˚

• Power outlet :

Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.

• Additional Clearance :

For Wall, 10cm:rear / 2cm : right & left side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls.

■ Installation place requirement

Positioning

Location

• Install the washer on a flat hard floor.

• Make sure that air circulation around the washer is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer.

• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.

• The washer must not be installed in rooms where the temperature can drop below 0°C.

• Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.

• With the washer installed, adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and the underside of any work-top.

• This equipment is not designed for maritime use or for use in a mobile installations such as caravans, aircraft etc.

• Do not use an extension cord or double adapter.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly

qualified person in order to avoid a hazard.

• Always unplug the machine and turn off the water supply after use.

• Connect the machine to an earthed socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

• Repairs to the washing machine must only be carried out by qualified personnel.

Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center

• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen

hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

• If the appliance is delivered in the winter months and temperatures are below freezing : Place the

washing machine at room temperature for a few hours before putting it into operation.

Electrical connection

nstallation

CAUTION concerning the Power cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in an electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

CAUTION

The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with appliance.

CAUTION

nstallation

1. Screw the hose connector onto water

supply tap.

Two rubber seals are supplied with the water inlet hoses. They are used for preventing water leaks. Make sure the connection to taps is sufficiently tight.

Upper connector

Rubber packing

Plate

Water supply hose

Fixing screw

1. Unscrew the adapter ring plate and the 4

adapter retaining screws.

2. Push the adapter onto the end of the tap

so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.

3. Push the water supply hose vertically

upwards so that the rubber packing within in the hose can adhere completely to the tap and then tighten it by screwing it to the right.

• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 ~ 10.0 kgf / cm

)

• Do not strip or crossthread when connecting Inlet hose to the valve.

• If the water supply pressure is more than 1000 kPa, a decompression device should be

installed.

• Periodically check the condition of the hose and replace the hose if necessary.

Type-1: Connecting Screw-type hose to tap with thread

Type-2: Connecting Screw-type hose to tap without thread

• Make sure that there are no kinks on the hose and that they are not crushed.

When your washer has two valves.

• The Inlet hose which has red connector is for the hot water tap.

• If the washer has two valves, the energy is saved by using hot valve.

■ To connect water supply hose

■ Connecting hose to water tap

Hose connector

Rubber seal

Hose connector

Rubber seal

nstallation

1. Unscrew the adapter ring plate and

the 4 adapter retaining screws.

2. Remove the guide plate if the tap is

too large to fit the adapter.

3. Push the adapter onto the end of

the tap so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.

4. Pull the connector latch plate down,

push the inlet hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place.

Type-3: Connecting one touch type hose to tap without thread

After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

Ring plate

Guide plate

Latch plate

nstallation

 Installation of drain hose

• The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or drains slowly.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

• If the drain hose is too long, do not force back into the washer. This will cause abnormal noise.

• When installing the drain hose to a sin, secure it tightly with string.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

•

Diagonal Check When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all (Please, check both directions). If machine rocks when pushing the machine top plate diagonally, adjust the feet again.

2. If the floor is uneven, turn the adjustable feet

as required. (do not insert pieces of wood etc. under the feet) Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. (use a spirit level)

1. Leveling the washing machine properly

prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.

Timber or suspended type flooring may contribute to excessive vibration and unbalance.

If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.

nstallation

■ Leveling

•

Once the washer is level, tighten the lock nuts up towards the base of the washer. All lock nuts must be tightened.

Raise Lower

Lock Nut

Tighten all 4 locknuts securely

nstallation

Concrete floors

Wooden floors (Suspended floors)

• The installation surface must be clean, dry and level.

• Install washer on a flat hard floor.

Tile floors (Slippery floors)

• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.)

• Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.

•

Wooden floors are particularly susceptible to vibration.

•

To prevent vibration we recommend you place rubber cups under each foot under washer at least 15mm thick, secured to at least 2 floor beams with screws.

•

If possible install the washer in one of the corners of the room, where the floor is more stable.

•

Insert the rubber cups to reduce vibration.

•

You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept.

•

Proper placement and levelling of the washer will ensure long, regular and reliable operation.

•

The washer must be 100% horizontal and stand firmly in position.

•

It must not “Seesaw” across corners under load.

•

The installation surface must be clean, free from floor wax and other lubricant coatings.

• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.

Rubber Cup

ow to use washer

 Operating washing machine

2. Open the door and load laundry.

1. Sort Laundry.

(Refer to 15 page)

3. Press the Power button.

4. Select a Program.

(Refer to 16~18 page)

5. Add detergent.

(Refer to 25~26 page)

6. Press the Start/Pause button.

Select options at this time (Refer to 20~23 page)

■ Additional Program

■ Temperature

■ Spin Speed

■ Other functions

ow to use washer

■ Care before washing

3. Caring before loading

Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.

• Check all pockets to make sure that they are empty. Items such as nails, hair clip, matches, pens, coins and keys can damage both your washer and your clothes.

• Close zippers, hooks and strings to make sure that these items don’t snag on other clothes.

• Pre treat dirt and stains by brushing a little detergent dissolved in water onto stains like collars and cuffs to help lift dirt.

• Check the folds of the flexible gasket (gray) and remove any small articles.

• Check inside of the drum and remove any item from a previous wash.

• Remove any clothing or items from the flexible gasket to prevent clothing and gasket damage.

2. Sorting

To get the best results, sort clothes into loads that can be washed with the same wash cycle. Water temperature and spin speed and different fabrics need to be washed in different ways. Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing discoloration of white etc. If possible, do not wash heavily soiled items with lightly soiled one.

• Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.

• Color (White, Lights, Darks) Separate white fabrics from colored fabrics.

• Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

1. Care Labels

Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed.

Before the first washing, Select a cycle (Cotton 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing.

Wash temperature

Normal machine wash

Permanent press

Hand wash

Sort laundry by...

Soiling

Colour

Wash temperature

Fabric type

Delicate

Do not wash

ow to use washer

Cotton

Eco

Easy Care

Mix

Provide optimized washing performance with less energy consumption.

This cycle is suitable for casual shirts that do not need ironing after washing.

Enables various fabrics to be washed simultaneously.

Program

Description

Fabric type

Proper

Temp.

Maximum

Load

Cotton

Provides better performance by combining various drum motions.

Color fast garments (shirts, nightdresses, pajamas, etc) and lightly soiled white cotton (underwear).

Polyamide, Acrylic, Polyester.

Various kind of fabrics except special garments. (Silk/delicate, sports wear, dark clothes, wool, Duvet/Curtains).

Allergy

Care

Removes allergens such as house mites, pollen, and cat fur.

Cotton, underwear, pillow covers, bed sheets, baby wear.

Silent Wash

Provides less noise and vibration and saves money by using overnight electricity.

Color fast garments (shirts, nightdresses, pajamas, etc)and lightly soiled white cotton (underwear).

Refresh

Removes wrinkles within 20mins with steam.

Cotton mixed, Polyester mixed Dress shirts, blouses.

Duvet

This cycle is for large items such as bed cover, pillows, sofa covers, etc.

Cotton bedding except special garments (delicates, wool, silk, etc.) with filling: duvets, pillows, blankets, sofa covers with light filling.

Sports

Wear

This cycle is suitable for sports wear such as jogging clothes and running wear.

Coolmax, Gore-tex, fleece and Sympatex.

Dark

Wash

If it's possible for clothes to decolorate, please use this cycle. The cycle prevent decolorization. (Please use detergent for colored fabrics.)

Dark garments made from cotton or mixed fabrics.

Delicate

This cycle is for delicate clothes such as underwear, blouse, etc.

Delicate, easily damaged laundry.

Wool

Enable to wash wool fabrics. (Please use detergent for machinewashable woolens).

Machine washable woolens with pure new wool only.

Quick 30

This cycle provides fast washing time for small loads and lightly soiled clothes.

Colored laundry which is lightly soiled fast.

Intensive

Within 60mins provide better washing performance and energy efficiency.

Cotton and mix fabrics. (Special PROGRAM within 60 mins for normally soiled laundry).

40°C

(Cold to 95°C)

60°C

(Cold to 60°C)

40°C

(Cold to 60°C)

40°C

(Cold to 40°C)

60°C

40°C

(Cold to 60°C)

choice

40°C

(Cold to 40°C)

30°C

(Cold to 40°C)

40°C

(Cold to 40°C)

30°C

(Cold to 40°C)

60°C

(Cold to 60°C)

Rating

4.0 kg

4.5 kg

3 items

1 single

size

2.0 kg

4.0 kg

 Washing program table

•

Recommended courses according to the laundry type.

 Extra options

* : This option is automatically included in the cycle and can not be deleted.

Cotton

Cotton Eco

Easy Care

Mix

Allergy Care

Silent Wash

Refresh

Duvet

Sports Wear

Dark Wash

Delicate

Wool

Quick 30

Intensive 60

Time Delay

Steam Wash

FavoriteProgram

Pre Wash

Medic Rinse

Rinse + Spin

Time Save

Intensive

ow to use washer

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine M1009.

•

Water Temperature: Select water temperature to suit wash cycles. Always follow garment manufacture’s care label or instructions when washing.

•

Set program at “Cotton Eco 60°C + Intensive” option for test in accordance in conformity with EN60456 and IEC60456.

•

The test results depend on water pressure, water hardness, water inlet temperature, room temperature, type and amount of load, degree of soiling utilized detergent, fluctuations in the main electricity supply and chosen additional options.

Neutral detergent is recommended. The wool cycle features gentle tumbling and low-speed spin for garment care.

ow to use washer

 Operating data

F12** F10**

Energy

(kWh)

Water

( )

Max RPM Consumption data

Cotton

Cotton Eco

Easy Care

Slient Wash

Mix

Duvet

Allergy Care

Refresh

Sports Wear

Dark Wash

Delicate

Wool

Quick 30

Intensive 60

F14**

1400

1000

1400

1000

1400

800

1400

800

1400

1200

1000

1200

1000

1200

800

1200

800

1200

1000

800

1000

800

1000

0.91

1.10

0.70

0.50

0.48

0.50

1.15

0.12

0.34

0.18

0.26

0.49

0.19

0.93

0.10

Program

ow to use washer

Start/Pause

button

Option Button

Beep

On/Off

Power button

Spin dail

Tub Clean

Rinse, Temp. Button

Power

• Press the Power button to turn power on and off.

• To cancel the Time Delay function, the power button should be pressed.

LED display

• The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.

Program dial

• Programs are available according to the laundry type.

• Lamp will light up to indicate selected program.

Additional program

• Use these buttons to select the desired cycle options for the selected cycle.

Options

• This allows you to select addition cycle and will light when select.

Start/Pause

• This Start/Pause button is used to start

wash cycle or pause the wash cycle.

• If temporary stop of wash cycle is

needed, press the Start/Pause button.

• When in Pause, the power is turned off automatically after 4 minutes.

■ Control panel

Child Lock

Additional program

buttons

LED display

Program dial

1. Press the Power button.

2. Select a cycle.

3. Press the Time Delay button and set

time required.

4. Press the Start/Pause button.

You can set a time delay so that the washing machine will start automatically and ﬁnish after a speciﬁed time interval.

The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.

ow to use washer

Favorite program allows you to store a customized wash cycle for future use.

1. Press

the

Power button.

2. Select a cycle.

3. Select the course.

(Washing method, number of rinses, spin speed, water temperature etc.)

4. Press and hold Favorite program button

3 seconds.

The Favorite program is now stored for future use. To reuse the program, select Favorite program and press

the

Start/Pause.

Steam Wash features enhance washing performance with low energy consumption. Refresh cycle reduces creases in clothes.

1. Press the Power button.

2. Select steam course.

3. Press the Steam Wash button.

4. Press the Start/Pause button.

Steam Wash

• For heavily stained clothes, underwear, or baby clothes.

• Avaible with the Cotton, Cotton Eco,

Mix, Easy Care, Duvet, Allergy Care, Refresh programs.

• Refresh cycle is always Steam Wash.

• Do not use Steam Wash for delicates such as wool, silk, and easily discolored clothes.

Favorite

If the laundry is heavily soiled, “Pre Wash” course is effective.

1. Press the Power button.

2. Select a cycle

3. Press the Pre Wash button.

4. Press the Start/Pause button.

Pre Wash

Time Delay

Steam Wash

■ Additional program

ow to use washer

1. Press the Power button.

2. Select a cycle.

3. Press the Option button

(Rinse+Spin light up).

4. Press the Start/Pause.

1. Press the Power button.

2. Select the spin speed.

3. Press the Start/Pause.

1. Press the Power button.

2. Select the Refresh program.

3. Press the Steam Wash button

repeatedly until the correct item is displayed.

4. Press the Start/Pause button.

For better performance load 3 item or less. When Refresh cycle finishes, laundry will continue to be tumbled slowly for up to 30 minutes to prevent wrinkling. You can open the door in this time by pressing any button.

When you select "No Spin", it will still rotate for a short time with low speed to drain quickly.

Rinse+Spin

• Medic Rinse : For best results or for cleaner rinsing.

• Rinse+Spin : This can be helpful in preventing fresh stains from setting in fabrics. This is a separate cycle.

• Time Save : This option can be used to reduce the time of a wash program.

• Intensive : If the laundry is normal and heavily soiled, “Intensive” option is effective.

Option

• Rinse++Hold : Add rinse once then after rinsing process, the course is paused until start button is pressed again.

• Normal+Hold : The course is paused until start button is pressed again when rinse is finished.

• Rinse

: Add rinse twice.

• Rinse

: Add rinse once.

Rinse

• By pressing the Temp. button the water temperature can be selected.

- Cold

- 30°C, 40°C, 60°C, 95°C

• Water temperature can be selected according to the program.

Temp.

Spin Only

Refresh Cycle

■ Options ■ Other functions

The Beep on/off function can be set only during the washing cycle.

1. Press

the

Power button.

2. Press the Start/Pause button.

3. Press and hold the Option and Rinse button

simultaneously for three seconds to set Beep on/off function.

Once the Beep on/off function is set, the setting is memorized even after Power turned off.

ow to use washer

Locking the control panel

1. Press

the

Option buttons simultaneously

for 3 seconds.

2. A beeper will sound, and ' ' will appear

momentarily on the LED Display. When the child lock is set, all buttons are locked except for the Power button.

Select this function to lock the buttons on the control assembly to prevent tampering. "Child Lock" can be set only during the washing cycle.

Unlocking the control panel

1. Press

the

Option buttons simultaneously

for 3 seconds.

2. A beeper will sound and the remaining time

for the current programme will reappear on the LED Display.

When child lock is activated the LED display will alternate between " " and time remaining. Turning off the power will not reset the child lock function. you must deactivate child lock before you can access any other functions.

If you want to turn off Beeper simply repeat this process

■ Child Lock

■ Beep On / Off

+ 49 hidden pages