LG F1040N-WN, F1040N-PN, F8400NWN, F8400NPN, F1040PPN User Manual

ENGLISH
Digital Photo Frame
1
Important Safety Precaution
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and service.
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certied by the applicable
national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specications of this manual or listed on the display. If you are not sure
what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock
or re hazard. Call your service technician for replacement.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.
This can cause personal injury, and/or damage the product.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
Never touch the power cord during periods of thunder and lightning. This can be very dangerous and can cause electric shock
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these
openings are blocked, built-up heat can cause failures which may result in a re hazard. Therefore, NEVER:
Place the display in a built-in enclosure unless proper ventilation is provided.
Place the display near or over a radiator or heat source.
Do not r ub or s trik e the Active Matr ix LCD with anything h ard as this may scratch, mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your nger for a long time as this may cause some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.
Leaving a xed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a
screen saver on the product. Burn-in and related problems are not covered by the warranty on this product.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause
electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When
shipping the unit to another location, repack it in its original material.
On Disposal
The uorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
Digital Photo Frame
Digital Photo Frame
ENGLISH
2
Digital Photo Frame
View
MENU Button
SHOW / EDIT Button
BROWSER / OPTION Button
POWER Button
USB-
Used to connect
storage device
Kensington Security Slot (separate purchase required)
– Connected to a
locking cable that can be pur­chased separately at most computer stores.
NAVIGATION OK Button
Back
Bottom
DC 12V IN
USB – Used to connect PC SD/MMC/xD/MS/MS-Pro Card Slot
CF Card Slot
ENGLISH
Digital Photo Frame
3
Digital Photo Frame
Attaching / Detaching Stand
1. Connect the power adapter to DC 12V IN at the
bottom of the product, and connect the power cord. NOTE : The Digital Photo Frame and it accessories
may look different from those shown here.
2.
Press the POWER button on the back of the
product to turn the power on. When turning off the power, press the POWER button for 2~3 seconds until the screen goes off.
Connecting Power Cord / Turning Power On or Off
1. Place the monitor face down in the cushion or soft cloth.
3.
Then stand the product upright gently.
2. Fit the stand into the 4 holes at the bottom of the product.
4.
To detach the stand, move it to and fro
and pull it out.
Stand
Loading...
+ 7 hidden pages