LG E2350VV, E2250VV Users manual

Make sure to read the Important Precautions before using the

product. Keep the User's Guide(CD) in an accessible place for future

reference.

See the label attached on the product and give the information to

your dealer when you ask for service.

E2250V

E2350V

User’s Guide

This unit has been engineered and manufactured to ensure your personal safety,

however improper use may result in potential electrical shock or fire hazards. In

order to allow the proper operation of all safeguards incorporated in this display,

observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power

cord, make sure that it is certified by the applicable national standards if not being

provided by the supplier. If the power cable is faulty in any way, please contact the

manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the

socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this

manual or listed on the display. If you are not sure what type of power supply you

have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power

cords and broken plugs. They may result in a shock or fire hazard. Call your

service technician for replacement.

As long as this unit is connected to the AC wall outlet, it is not disconnected from

the AC power source even if the unit is turned off.

Do not Open the Display:

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF.

Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.

Use only a stand recommended by the manufacturer.

Do not drop an object on or apply impact to the product. Do not throw any toys

or objects on the product screen.

It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period

of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet

openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display.

When the display is to be left unattended for an extended period of time, unplug

it from the wall outlet.

In the presence of thunder and lightning, never touch the power cord and signal

cable because it can be very dangerous. It can cause electric shock.

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the

display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release

of heat generated during operation. If these openings are blocked, built-up heat

can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,

mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause

some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.

However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for

your LCD display. If used under any mode except the recommended resolution,

some scaled or processed images may appear on the screen. However, this is

characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the

screen and cause image burn-in. Make sure to use a screen saver on the product.

Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.

Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you

drop the product, the damaged product can cause electric shock or fire. Contact

an authorized the service center for repair.

Avoid high temperatures and humidity.

Important Precautions

NOTE

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY

NOTE

This epuipment has been tested and found to comply with the limits for a class

B digital device,pursuant to part 15 of the FCC Rules.These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.This equipment generates,uses and can radiate radio frequency

cause harmful interference to radio communications.However,there is no

guarantee that interference will not occur in a particular installation.If this

which can be determined by turning the equipment off and on,the user is

encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and the receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

energy and,if not installed and used in accordance with the instructions,may

equipment does cause harmful interference to radio or television reception,

TO OPERATE THE EQUIPMENT.

-Consult the dealer or an experienced radio/TV technician for help.

Important Precautions

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display

screen because over-spraying may cause electrical shock.

When cleaning the product, unplug the power cord and scrub gently with a soft

cloth to prevent scratching. Do not clean with a wet cloth or spray water or other

liquids directly onto the product. An electric shock may occur. (Do not use

chemicals such as benzene, paint thinners or alcohol)

Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;

wipe in one direction only. Too much moisture may cause staining.

On Repacking

Do not throw away the carton and packing materials. They make an ideal

container in which to transport the unit. When shipping the unit to another

location, repack it in its original material.

On Disposal

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of

your local authority.

Accessories

!!! Thank for selecting LGE products !!!

Please make sure the following items are included with your

monitor. If any items are missing, contact your dealer.

DVI-D Signal Cable

(This feature is not available in

all countries.)

NOTE

This accessories may look different from those shown here.

User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite

cores to maintain standard compliance for the product.

User's Guide/Cards

Power Cord AC-DC adapter

(Depending on the country)

AC-DC adapter

(Depending on the country)

15-pin D-Sub Signal Cable

(To set it up, this signal cable may

be attached to this product before

shipping out.)

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

1 way stand

1. Place the monitor with its front facing downward on a soft cloth.

2. Use a coin on the back of the stand base and turn the screw clockwise to tighten.

3. Once assembled take the monitor up carefully and face the front side.

4. When you desire to disintegrate the monitor from the stand base, use a coin to turn the

screw counterclockwise.

Important

This illustration depicts the general model of connection. Your monitor may differ from

the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may

fall and get damaged or injure your foot.

Press

Connecting the Display

2. Press the button as shown, and pull the stand body up.

3. After pull the stand body up,take the monitor up carefully and face the front side.

(Once you pull the stand body up, please keep pressing the button.If you don’t

press the button, it will damage the product.)

When limited tilt degree, the button

is not working, pull stand body up or

down a little.

Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

2 way stand

1. Place the monitor with its front facing downward on a soft cloth.

Connecting the Display

If you want to use the stand base,pull the stand body down.

(Once you pull the stand body down, please keep pressing the button.If you don’t

press the button, it will damage the product.)

5. Use a coin on the back of the stand base and turn the screw clockwise to tighten.

6. Once assembled take the monitor up carefully and face the front side.

Important

This illustration depicts the general model of connection. Your monitor may differ from

the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may

fall and get damaged or injure your foot.

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor,

the computer system, and other attached devices is turned off.

Positioning your display

After installation, adjust the angle as shown below.

* With stand base

Adjust the position of the panel in various ways for maximum comfort.

Tilt Range : -5˚ - 15˚

ERGONOMIC

It is recommended that in order to maintain an ergonomic and comfortable viewing position,

the forward tilt angle of the monitor should not exceed 5 degrees.

Do not touch or press the screen when

adjusting the angle of the monitor.

When adjusting the angle of the screen, do

not put your finger(s) in between the head of

the monitor and the stand body. You can

hurt your finger(s).

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor,

the computer system, and other attached devices is turned off.

Positioning your display

* Without stand base

Ergonomic

It is recommended that in order to maintain an ergonomic and comfortable viewing position, the

backward tilt angle of the monitor should exceed 10 degrees.

+ 23 hidden pages