LG E2340TV User Manual

Make sure to read the Important Precautions before using the

product. Keep the User's Guide(CD) in an accessible place for future
reference.

See the label attached on the product and give the information to

your dealer when you ask for service.

E1940T
E2040T
E2240T
E2340T
E1940S
E2040S
E2240S
E2340S

User’s Guide

1

This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this
manual or listed on the display. If you are not sure what type of power supply you
have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your
service technician for replacement.

As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.

Do not Open the Display:

There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.

Important Precautions

2

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.

Avoid high temperatures and humidity.

Important Precautions

3

On Cleaning

Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display

screen because over-spraying may cause electrical shock.

When cleaning the product, unplug the power cord and scrub gently with a soft

cloth to prevent scratching. Do not clean with a wet cloth or spray water or other
liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)

Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;

wipe in one direction only. Too much moisture may cause staining.

On Repacking

Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.

On Disposal (Only , Hg lamp used LCD Monitor)

The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of

your local authority.

Important Precautions

NOTE

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY

NOTE

This epuipment has been tested and found to comply with the limits for a class
B digital device,pursuant to part 15 of the FCC Rules.These limits are designed

to provide reasonable protection against harmful interference in a residential
installation.This equipment generates,uses and can radiate radio frequency

-Increase the separation between the equipment and the receiver.

-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

energy and,if not installed and used in accordance with the instructions,may

TO OPERATE THE EQUIPMENT.

-Consult the dealer or an experienced radio/TV technician for help.

cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,the user is
encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

A3

4

Accessories

!!! Thank for selecting LGE products !!!

Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.

User's Guide/Cards

Power Cord

15-pin D-Sub Signal Cable

(To set it up, this signal cable may be

attached to this product before

shipping out.)

DVI-D Signal Cable

(This feature is not available in

all countries.)

NOTE

This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.

AC-DC adapter

AC-DC adapter

(Depending on the country)

(Depending on the country)

or

Connecting the Display

5

Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.

Connecting the stand

1. Place the monitor with its front facing downward on

a soft cloth.

2. Check the direction of the Stand Base, and connect it into the Stand Body.

Stand Base

Stand Body

3. Once assembled take the monitor up carefully and face the front side.

Important

This illustration depicts the general model of connection. Your monitor may differ from the
items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and
get damaged or injure your foot.

6

Connecting the Display

Disassembling the stand

1. Place the monitor with its front facing downward on

a soft cloth.

2. Nip Latch inside, Take off the stand base from stand body.

7

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.

Positioning your display

-After installation, adjust the angle as shown below.

1. Adjust the position of the panel in various ways for maximum comfort.

Tilt Range : -5˚~15˚

ERGONOMIC

It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.

Do not touch or press the screen when
adjusting the angle of the monitor.

When adjusting the angle of the screen, do
not put your finger(s) in between the head of
the monitor and the stand body. You can
hurt your finger(s).

15

8

Connecting the Display E1940T/E2040T/E2240T/E2340T

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.

A

B

Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable

1. Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

2.

Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.

Connecting with the PC

1

2

Wall-outlet type

Mac adapter : For Apple Macintosh use, a

separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.

When using a D-Sub signal input cable connector
for Macintosh

Varies according to model.

DVI-D (This feature is not available in all countries.)

NOTE

This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.

3. Press the power button on the front panel to turn the power on. When monitor power is

turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

Power Button

9

Connecting the Display E1940S/E2040S/E2240S/E2340S

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.

A

Connect D-sub(Analog signal) Cable

1. Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

2.

Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.

Connecting with the PC

1

2

A

Wall-outlet type

Mac adapter : For Apple Macintosh use, a

separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.

When using a D-Sub signal input cable connector for
Macintosh

Varies according to model.

3. Press the power button on the front panel to turn the power on. When monitor power is

turned on, the 'Self Image Setting Function' is executed automatically.

Power Button

NOTE

This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.

10

Control Panel Functions

Front Panel Controls

MODE Button

Use this button to enter F-ENGINE, ORIGINAL RATIO,
PHOTO EFFECT menus.

For more information, refer to page 18.

MENU Button

OSD LOCKED/UNLOCKED

This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.

11

Control Panel Functions

AUTO Button

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)

This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).

The best display mode is

E1940S/E1940T : 1360 x 768
E2040S/E2040T : 1600 x 900
E2240S/E2340S/E2240T/E2340T : 1920 x1080

INPUT Button

Use this button to turn the display on or off.

The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white.

Power Button &
Power Indicator

When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.

(SOURCE Hot key)

Exit the OSD(On Screen Display).

EXIT Button

12

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the discretionary Button, then the main menu of the OSD appears.

To access a control, use the corresponding Buttons.

Use the / Buttons to adjust the image to the desired level.
Use the Button to select other sub-menu items.

Press the EXIT Button to exit from the OSD.

1

2

3

4

13

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment,
and setting menus.

F-ENGINE

ORIGINAL
RATIO

PHOTO
EFFECT

MODE

To select or customize desired
image settings

DSUB

DVI-D

LANGUAGE
POWER INDICATOR

WHITE BALANCE

FACTORY RESET

To customize the screen status
for a user's operating
environment

OTHERS

HORIZONTAL
VERTICAL

CLOCK
PHASE

DISPLAY

To adjust the position of the
screen

COLOR TEMP

(PRESET / USER)

GAMMA

COLOR

To customize the color of the
screen

BRIGHTNESS
CONTRAST
SHARPNESS

PICTURE

To adjust the brightness, contrast
and sharpness of the screen

NOTE

The order of icons may differ depending on the model (13~21).

DSUB

DVI-D

DSUB

DVI-D

DSUB

DSUB

DSUB

DVI-D

DSUB

DVI-D

DSUB

To adjust the image size

DSUB

DVI-D

Main menu Sub-menu

Supported input

Description

To improve the clarity and
stability of the screen

To adjust the screen color mode

: D-SUB(Analog signal) input
: DVI-D(Digital signal) input

DSUB

DVI-D

NORMAL
MOVIE
INTERNET
DEMO

WIDE
ORIGINAL

NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME

DSUB

DVI-D

14

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.

Sub­menus

NOTE

OSD (On Screen Display) menu languages on the monitor may differ from the manual.

Menu Name

Icons

Button
Tip

Exit
Adjust (Decrease/Increase)
Select another sub-menu

Restart to select sub-menu

Press the MENU Button, then the main menu of the OSD appears.

15

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

Exit : Exit

: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu

BRIGHTNESS

CONTRAST

SHARPNESS

To adjust the brightness of the screen.

To adjust the contrast of the screen.

To adjust the clearness of the screen.

PRESET

Select the screen color.

• sRGB: Set the screen color to fit the
sRGB standard color
specification.

• 6500K: Slightly reddish white.

• 9300K: Slightly bluish white.

RED

Set your own red color levels.

GREEN

Set your own green color levels.

BLUE

Set your own blue color levels.

GAMMA

Set your own gamma value. : 0 / 1 / 2
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.

COLOR TEMP

USER

Exit : Exit

: Decrease
: Increase
: Select another sub-menu

: Restart to select sub-menu

16

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

CLOCK

PHASE

To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.

To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.

HORIZONTAL

VERTICAL

To move image left and right.

To move image up and down.

E1940T/E2040T/E2240T/E2340T

E1940S/E2040S/E2240S/E2340S

Exit : Exit

: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu

17

On Screen Display(OSD) Selection and Adjustment

Press the , buttons to reset
immediately.

Main menu Sub menu Description

To choose the language in which the
control names are displayed.

LANGUAGE

WHITE
BALANCE

If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.

Restore all factory default settings except

"LANGUAGE."

FACTORY
RESET

POWER
INDICATOR

Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.

NOTE

If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal.

Exit : Exit

: Decrease
: Increase
: Select another sub-menu

: Restart to select sub-menu

18

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.

Sub­menus

NOTE

OSD (On Screen Display) menu languages on the monitor may differ from the manual.

Menu Name

Icons

Button
Tip

Exit
Adjust (Decrease/Increase)

Select another sub-menu
Restart to select sub-menu

Press the MODE Button, then the main menu of the OSD appears.

19

On Screen Display(OSD) Selection and Adjustment

PHOTO EFFECT

PHOTO EFFECT

PHOTO EFFECT

PHOTO EFFECT

Main menu Sub menu Description

NORMAL

Select this when you want to use the product
in the most general using environment.

MOVIE

Select this when you are watching a video or
movie.

INTERNET

Select this when you are working on the
document (Word etc.)

DEMO

This is used for advertising in the store. The
screen will be divided to show the standard
mode on the left and video mode on the right so
that the consumers can check the difference
after applying the video mode.

Exit : Exit

,

: Move
: Select another sub-menu
: Restart to select sub-menu

20

On Screen Display(OSD) Selection and Adjustment

PHOTO EFFECT

PHOTO EFFECT

Main menu Sub menu Description

Change the input image signal ratio to
original.

WIDE

ORIGINAL

Switch to full screen mode according to
input image signal.

* This function works only if input
resolution is lower than monitor ratio
(16:9).

Exit : Exit

,

: Move
: Select another sub-menu
: Restart to select sub-menu

On Screen Display(OSD) Selection and Adjustment

21

PHOTO EFFECT

PHOTO EFFECTPHOTO EFFECT

GAUSSIAN
BLUR

SEPIA MONOCHROME

PHOTO EFFECTPHOTO EFFECT

PHOTO EFFECTPHOTO EFFECT

PHOTO EFFECTPHOTO EFFECT

GAUSSIAN
BLUR

SEPIA MONOCHROME

GAUSSIAN
BLUR

SEPIA MONOCHROME

GAUSSIAN
BLUR

SEPIA MONOCHROME

Main menu Sub menu Description

NORMAL

The PhotoEffect function is disabled.

GAUSSIAN
BLUR

This menu changes the screen to be more
colorful and smoother.

SEPIA

This menu changes the screen to be
Sepia tone (brown color).

MONOCH

-ROME

This menu changed the screen to be
Gray tone(black-and-white Picture) .

Exit : Exit

,

: Move
: Select another sub-menu
: Restart to select sub-menu

22

Troubleshooting

No image appears

Check the following before calling for service.

No image appears

Do you see a "OSD LOCKED" message on the screen?

● Is the power cord of the

display connected?

● Is the power indicator

light on?

● Is the power indicator

blinking?

● Do you see an "OUT OF

RANGE" message on
the screen?

● Do you see a "CHECK

SIGNAL CABLE"
message on the
screen?

•

Check and see if the power cord is connected
properly to the power outlet.

•

Press the Power button.

•

If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.

• Try to turn on the PC

.

•

This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.

•

This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.

• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.

●

Do you see “OSD

LOCKED” when you
push MENU button?

23

Troubleshooting

Display image is incorrect

● Display Position is

incorrect.

● On the screen

background, vertical
bars or stripes are
visible.

● Any horizontal noise

appearing in any
image or characters
are not clearly
portrayed.

•

Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.

•

Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.

•

Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the

horizontal bars using the PHASE icon in the on
screen display.

•

Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).

IMPORTANT

Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select

the recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.

24

Display image is incorrect

Troubleshooting

● The screen color is

mono or abnormal.

● The screen blinks.

•

Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.

•

Make sure the video card is properly inserted in
the slot.

•

Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.

•

Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA
DDC) monitor found" message?

●

Have you installed the

display driver?

•

Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.

•

Make sure to check if the video card supports
Plug&Play function.

25

Specifications E1940T

18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

47.0

cm

0.300 x 0.300 mm (Pixel pitch)

Display

Horizontal Freq. 30 - 61 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Composite, Digital

Sync Input

Signal Input 15 pin D-Sub Connector

DVI-D Connector (Digital)

Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Video Input

Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 Hz

Resolution

Plug&Play

On Mode

:

18 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W

Power
Consumption

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Environment
al Conditions

With Stand

Width 46.34 cm / 18.24 inches
Height 37.35 cm / 14.70 inches
Depth 17.40 cm / 6.85 inches

Weight(excl. packing) 2.4 kg (5.29 lbs)

Dimensions

& Weight

Tilt : -5˚~15˚

Range

12V 2.0A

Power Input

Attached ( ), Detached ( O )

Stand Base

Wall-outlet type

Power cord

DDC 2B(Digital),DDC2AB(Anlaog)

Without Stand

Width 46.34 cm / 18.24 inches
Height 30.20 cm / 11.89 inches
Depth 4.3 cm / 1.69 inches

NOTE

Information in this document is subject to change without notice.

Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics

or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics

AC-DC Adapter

26

Specifications E1940S

18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

47.0

cm

0.300 x 0.300 mm (Pixel pitch)

Display

Horizontal Freq. 30 - 61 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Composite

Sync Input

Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Video Input

Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 Hz

Resolution

Plug&Play

On Mode

:

18 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W

Power
Consumption

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Environment
al Conditions

With Stand

Width 46.34 cm / 18.24 inches
Height 37.35 cm / 14.70 inches
Depth 17.40 cm / 6.85 inches

Weight(excl. packing) 2.4 kg (5.29 lbs)

Dimensions

& Weight

Tilt : -5˚~15˚

Range

12V 2.0A

Power Input

Attached ( ), Detached ( O )

Stand Base

Wall-outlet type

Power cord

DDC 2AB

Without Stand

Width 46.34 cm / 18.24 inches
Height 30.20 cm / 11.89 inches
Depth 4.3 cm / 1.69 inches

NOTE

Information in this document is subject to change without notice.

Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics

or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics

AC-DC Adapter

27

Specifications E2040T

20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

50.8

cm

0.2766 x 0.2766 mm (Pixel pitch)

Display

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Composite, Digital

Sync Input

Signal Input 15 pin D-Sub Connector

DVI-D Connector (Digital)

Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Video Input

Max VESA 1600 x 900 @ 60 Hz
Recommend VESA 1600 x 900 @ 60 Hz

Resolution

Plug&Play

On Mode

:

21 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W

Power
Consumption

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Environment
al Conditions

With Stand

Width 49.68 cm / 19.56 inches
Height 39.11 cm / 15.40 inches
Depth 20.2 cm / 7.95 inches

Weight(excl. packing) 2.6 kg (5.73 lbs)

Dimensions

& Weight

Tilt : -5˚~15˚

Range

12V 2.0A

Power Input

Attached ( ), Detached ( O )

Stand Base

Wall-outlet type

Power cord

DDC 2B(Digital),DDC2AB(Anlaog)

Without Stand

Width 49.68 cm / 19.56 inches
Height 31.96 cm / 12.58 inches
Depth 4.3 cm / 1.69 inches

NOTE

Information in this document is subject to change without notice.

Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics

or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics

AC-DC Adapter

28

Specifications E2040S

20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

50.8

cm

0.2766 x 0.2766 mm (Pixel pitch)

Display

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Composite

Sync Input

Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Video Input

Max VESA 1600 x 900 @ 60 Hz
Recommend VESA 1600 x 900 @ 60 Hz

Resolution

Plug&Play

On Mode

:

21 W(Typ.)

Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W

Power
Consumption

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Environment
al Conditions

With Stand

Width 49.68 cm / 19.56 inches
Height 39.11 cm / 15.40 inches
Depth 20.2 cm / 7.95 inches

Weight(excl. packing) 2.6 kg (5.73 lbs)

Dimensions

& Weight

Tilt : -5˚~15˚

Range

12V 2.0A

Power Input

Attached ( ), Detached ( O )

Stand Base

Wall-outlet type

Power cord

DDC 2AB

Without Stand

Width 49.68 cm / 19.56 inches
Height 31.96 cm / 12.58 inches
Depth 4.3 cm / 1.69 inches

NOTE

Information in this document is subject to change without notice.

Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics

or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics

AC-DC Adapter

29

Specifications E2240T

21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

54.6

cm

0.248 x 0.248 mm (Pixel pitch)

Display

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Composite, Digital

Sync Input

Signal Input 15 pin D-Sub Connector

DVI-D Connector (Digital)

Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Video Input

Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz

Resolution

Plug&Play

On Mode

:

25 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W

Power
Consumption

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Environment
al Conditions

With Stand

Width 52.98 cm / 20.86 inches
Height 40.93 cm / 16.11 inches
Depth 20.2 cm / 7.95 inches

Weight(excl. packing) 3.0 kg (6.61 lbs)

Dimensions

& Weight

Tilt : -5˚~15˚

Range

12V 3.0A

Power Input

Attached ( ), Detached ( O )

Stand Base

Wall-outlet type

Power cord

DDC 2B(Digital),DDC2AB(Anlaog)

Without Stand

Width 52.98 cm / 20.86 inches
Height 33.78 cm / 13.30 inches
Depth 4.3 cm / 1.69 inches

NOTE

Information in this document is subject to change without notice.

Type FSP036D-DGAA1, manufactured by FSP Electronic

or type LCAPO7E-2, manufactured by Lienchange Electronics

AC-DC Adapter

30

Specifications E2240S

21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

54.6

cm

0.248 x 0.248 mm (Pixel pitch)

Display

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Composite

Sync Input

Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Video Input

Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz

Resolution

Plug&Play

On Mode

:

25 W(Typ.)

Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W

Power
Consumption

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Environment
al Conditions

With Stand

Width 52.98 cm / 20.86 inches
Height 40.93 cm / 16.11 inches
Depth 20.2 cm / 7.95 inches

Weight(excl. packing) 3.0 kg (6.61 lbs)

Dimensions

& Weight

Tilt : -5˚~15˚

Range

12V 3.0A

Power Input

Attached ( ), Detached ( O )

Stand Base

Wall-outlet type

Power cord

DDC 2AB

Without Stand

Width 52.98 cm / 20.86 inches
Height 33.78 cm / 13.30 inches
Depth 4.3 cm / 1.69 inches

NOTE

Information in this document is subject to change without notice.

Type FSP036D-DGAA1, manufactured by FSP Electronic

or type LCAPO7E-2, manufactured by Lienchange Electronics

AC-DC Adapter

31

Specifications E2340T

23 inches (58.4 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

58.4

cm

0.266 x 0.266 mm (Pixel pitch)

Display

Horizontal Freq. 30 - 83 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Composite, Digital

Sync Input

Signal Input 15 pin D-Sub Connector

DVI-D Connector (Digital)

Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Video Input

Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz

Resolution

Plug&Play

On Mode

:

28 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W

Power
Consumption

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Environment
al Conditions

With Stand

Width 56.38 cm / 22.20 inches
Height 42.90 cm / 16.89 inches
Depth 20.2 cm / 7.95 inches

Weight(excl. packing) 3.3 kg (7.28 lbs)

Dimensions

& Weight

Tilt : -5˚~15˚

Range

12V 3.0A

Power Input

Attached ( ), Detached ( O )

Stand Base

Wall-outlet type

Power cord

DDC 2B(Digital),DDC2AB(Anlaog)

Without Stand

Width 56.38 cm / 22.20 inches
Height 35.75 cm / 14.07 inches
Depth 4.3 cm / 1.69 inches

NOTE

Information in this document is subject to change without notice.

Type FSP036D-DGAA1, manufactured by FSP Electronic

or type LCAPO7E-2, manufactured by Lienchange Electronics

AC-DC Adapter

32

Specifications E2340S

23 inches (58.4 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :

58.4

cm

0.266 x 0.266 mm (Pixel pitch)

Display

Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.

Composite

Sync Input

Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Video Input

Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz

Resolution

Plug&Play

On Mode

:

28 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W

Power
Consumption

Operating Conditions

Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing

Environment
al Conditions

With Stand

Width 56.38 cm / 22.20 inches
Height 42.90 cm / 16.89 inches
Depth 20.2 cm / 7.95 inches

Weight(excl. packing) 3.3 kg (7.28 lbs)

Dimensions

& Weight

Tilt : -5˚~15˚

Range

12V 3.0A

Power Input

Attached ( ), Detached ( O )

Stand Base

Wall-outlet type

Power cord

DDC 2AB

Without Stand

Width 56.38 cm / 22.20 inches
Height 35.75 cm / 14.07 inches
Depth 4.3 cm / 1.69 inches

NOTE

Information in this document is subject to change without notice.

Type FSP036D-DGAA1, manufactured by FSP Electronic

or type LCAPO7E-2, manufactured by Lienchange Electronics

AC-DC Adapter

33

Specifications

Preset Modes (Resolution)

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

*Recommend Mode

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

*Recommend Mode

E1940T/E1940S

E2040T/E2040S

1
2
3
4
5
6
7
8

*9

720 x 400
640 x 480
640 x 480
800 x 600
800 x 600

832 x 624
1024 x 768
1024 x 768

1360 x 768

31.468

31.469

37.500

37.879

46.875

49.725

48.363

60.123

47.712

70
60
75
60
75
75
60
75
60

1
2
3
4
5
6
7
8

*9

720 x 400
640 x 480
640 x 480
800 x 600

800 x 600
1024 x 768
1024 x 768
1152 x 864

1600 x 900

31.468

31.469

37.500

37.879

46.875

48.363

60.123

67.500

60.000

70
60
75
60
75
60
75
75
60

34

Specifications

Indicator

On Mode
Sleep Mode
Off Mode

White

White Blinking

Off

LED Color

MODE

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

*Recommend Mode

E2240T/E2340T/E2240S/E2340S

1
2
3
4
5
6
7
8

9
10
11

*12

720 x 400
640 x 480
640 x 480
800 x 600

800 x 600
1024 x 768
1024 x 768
1152 x 864

1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080

31.468

31.469

37.500

37.879

46.875

48.363

60.123

67.500

63.981

79.976

65.290

67.500

70
60
75
60
75
60
75
75
60
75
60
60

Digitally yours