Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODELS
E2251T E2251S
E2251VR
www.lg.com
Important Precautions
NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY
NOTE
This epuipment has been tested and found to comply with the limits for a class
B digital device,pursuant to part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.This equipment generates,uses and can radiate radio frequency
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
energy and,if not installed and used in accordance with the instructions,may
TO OPERATE THE EQUIPMENT.
-Consult the dealer or an experienced radio/TV technician for help.
cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
A3
TABLE OF CONTENTS
2
ENGLISH
ENG
CONTENTS
3 ASSEMBLING AND PREPAR-
ING
3 Unpacking
4
Parts and buttons
6 Setting up the Monitor set
6 - Attaching the Stand Base
6 - Detaching the Stand Base
6 - Detaching the Stand Body (Using the
Wall mount)
7 - Mounting on a table
9 - Mounting on a wall
10 USING THE MONITOR SET
10 Connecting to a PC
10 - D-SUB connection
11 - DVI-D connection
12 - HDMI connection
26 - HDMI Timing
26 Indicator
27 PROPER POSTURE
27 Proper posture for using the Monitor set.
13 CUSTOMIZING SETTINGS
13 Accessing The Main Menus
14 Customizing Settings
14 - Menu Settings
15 - SUPER ENERGY SAVING Settings
16 - SUPER+ RESOLUTION Settings
16 - Volume Settings (Only supported in
HDMI)
17
- DUAL MONITOR Settings
17 - DUAL WEB Settings
18 TROUBLESHOOTING
20 SPECIFICATIONS
25 Preset Modes (Resolution)
25 - D-SUB / DVI Timing
ASSEMBLING AND PREPARING
3
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD(Owner's Manual) /
Card
D-SUB Cable
(This signal cable may be attached
to this product before shipping out.)
(This cable is not included in all
DVI-D Cable
countries.)
ENGLISH
ENG
Power CordAC-DC Adapter
Stand Base
CAUTION
Do not use any unapproved accessories to ensure the safety and product life span.
y
Any damages or injuries by using unapproved accessories are not covered by the warranty.
y
NOTE
The accessories supplied with your product may vary depending on the model.
y
Product specifications or contents in this manual may be changed without prior notice due to upgrade
y
of product functions.
User should use shielded signal interface cables (RGB cable / DVI-D cable) with ferrite cores (core
y
in the connector) to maintain standard compliance for the product.
ENGLISH
ENG
ASSEMBLING AND PREPARING
4
Parts and buttons
Power Indicator
Lighting On: Turned on
y
Lighting Off: Turned off
y
E2251S
E2251T
D-SUB
D-SUBDVI-D
DC-IN /
䏳㵎幑‣
DC-IN /
䏳㵎幑‣
E2251VR
HDMI
(Power Button)
Button ("CUSTOMIZING
SETTINGS" on page 13)
DC-IN /
D-SUBDVI-D
䏳㵎幑‣
Connection panel (See p.10)
ASSEMBLING AND PREPARING
ButtonDescription
MENU
Left First ButtonOSD LOCKED/
SUPER+ RESOLUTIONUse this button to enter SUPER+ RESOLUTION menu. For more information.(See p.16)
DUALUse this button to enter DUAL menu.
AUTOWhen adjusting your display settings, always press the AUTO button on the MONITOR
VOLUME (Only HDMI mode) Adjust the volume of the Monitor set.(See p.16)
INPUT You can choose the input signal.
EXITExit the OSD(On Screen Display).
(Power Button)
Accesses the main menus.(See p.14)
UNLOCKED
For more information.(See p.17)
SETUP OSD. (Only supported in Analog Mode)
The best display mode
E2251VR
When two input signals are at least are connected, you can select the input signal
y
(D-SUB/DVI/HDMI) you want.
When only one signal is connected, it is automatically detected. The default setting is
y
D-SUB.
Turns the power on or off.
Power IndicatorThe power indicator stays blue if the display is running
This function allows you to lock the current control settings, so
that they cannot be inadvertently changed.
Press and hold the Left First Button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing the
Left First Button for several seconds. The message "OSD
UNLOCKED" should appear.
1920 x 1080
properly (On Mode). If the display is in Sleep Mode, the power
indicator blinks blue.
5
ENGLISH
ENG
ASSEMBLING AND PREPARING
6
ENGLISH
ENG
Setting up the Monitor set
Attaching the Stand Base
Place the Monitor set with the screen side
1
down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
Attach the Stand Base into the Monitor set by
2
turning the Screw to the right.
Stand Body
Detaching the Stand Base
Place the Monitor set with the screen side
1
down on a flat and cushioned surface.
Turn the screw to the left, and then pull out the
2
Stand Base from the Stand Body.
Stand Base
CAUTION
This illustration depicts the general model of
y
connection. Your monitor may differ from the
items shown in the picture.
Do not carry the product upside down
y
holding only the stand base. The product
may fall and get damaged or injure your
foot.
Detaching the Stand Body (Using
the Wall mount)
Remove 2 screws and pull out the Hinge Cover
1
from the Monitor set.
Remove 4 screws and pull out the Stand Body
2
from the Monitor set.
ASSEMBLING AND PREPARING
Connect the AC-DC Adapter and Power Cord
2
to a wall outlet.
DC-IN /
䏳㵎幑‣
7
ENGLISH
ENG
Mounting on a table
Lift and tilt the Monitor set into its upright
1
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Press Power button on the front switch of panel
3
to turn the power on.
CAUTION
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.