LG DWD300 User Manual

E n g l i s h

E s p a ñ o l

Français

DWD-300 User Manual

Rev 1.0 US

All rights reserved.

LG Electronics inc., 2012

Note: For the best performance and to prevent any damage to, or misuse of the DWD-300, please read all of the information carefully before use.

WARNING :

This product contains chemicals known to the State of California to cause cancer and birth defects or reproductive harm.

Wash hands after handling.

ENG

1

ENG

Introduction

The LG DWD-300 is a light weight wireless display Adaptor that uses Wi-Fi technology.

This product can be used as a wireless AV accessory for devices that support the Miracast protocol.

Included in the Package

DWD-300 User Manual

LG DWD-300 User Manual Warranty Card

HDMI Cable	TA Combo
	(Micro USB Cable + TA Head)

2

Description of Parts

LED

Indicator

Front

Power

Supply Port

HDMI

Port

Back

ENG

Pairing

Button

3

ENG

How to Use

Installation

			(or Travel Adator)
	Power Supply Port	USB Port	TV or Monitor
	(Micro USB Cable (or Travel Adaptor))
	HDMI Port

•Attach the Micro USB cable to the power supply port on the DWD-300.

•Attach the opposite end of the Micro USB cable to the supplied TA (Travel Adaptor) Head or a USB port on a laptop or PC.

•Attach one end of the supplied HDMI cable to the HDMI port on the DWD-300 and the other end to a display device (TV or monitor).

4

	Connection
	• When the DWD-300 has power, a white LED indicator		ENG
	will turn on.
	• While booting, the LG logo will appear on the screen
	of the TV or monitor.
	• DWD-300 must be connected to a WiFi Direct capable
	device in order to function.
	• Once initial booting is complete, “Ready to Connect”
	will appear on the screen of the TV or monitor indicat-
	ing DWD-300 has automatically entered into connect-
	able mode.
	NOTE: Once DWD-300 is in connectable mode, by
	pressing the Pairing Button, DWD-300 will exit the
	connectable mode and go to idle mode. While in
	idle mode, DWD-300 will re-enter into connectable
	mode for two(2) minutes by pressing the Pairing
	Button again.

5

ENG

•Turn on WiFi Direct from the source device. (please note, this may disable all other WiFi settings)

•Select ‘Miracast’ from the source device settings (consult your owner’s manual for instructions)

•Press the Search soft key to begin a search of available devices.

•Select “LG DWD-300” from the list of devices to connect it with your source device.

•“Connecting” animated picture will appear to show ongoing connection process.

•Once the connection is successful, you will see the screen of the Miracast capable device on your TV or monitor.

•If the connection is unsuccessful, the white LED indicator will flicker.

6

Troubleshooting

				ENG
	Issue	Possible problem	Resolution
	DWD-300 does	Check whether the	Attach the Micro
		Micro USB cable is	USB cable for power
	not turn on.
		properly attached.	supply.
			- With the power
		- Check and make	ON, press the Push
		sure the DWD-	Button two times
	Unable to	300 is placed	(First one makes
	connect the	in connectable	DWD-300 idle
	DWD-300 with	mode.	mode, and second
	the Miracast		one for making
	capable source	- Check and make	connectable mode)
	device	sure WiFi Direct	or try power cycling
		is enabled on the	DWD-300.
		source device.	- Turn on WiFi Direct.
	An image does		Dettach and reat-
	not appear or
		Check whether the	tach the HDMI cable
	there is no vid-
		HDMI cable is at-	to the HDMI port on
	eo playback on
		tached correctly.	the DWD-300 and the
	the TV screen or
			display device
	monitor.

7

Specification

	ENG
		Item	Description
		Wi-Fi specification	802.11b/g/n (2.4GHz)
		Power Supply	DC 5V / 450mA
		Operation	14°F ~ 140°F (-10°C ~ 60°C)
		temperature
		Dimension / weight	54.6mm(W) X 62.1mm(L) X 11mm(H)
			/ 29.3g

Precautions

•Do not drop the device.

•Do not modify, repair, or disassemble.

•Do not expose directly to water, alcohol, benzene, etc. for cleaning.

•Do not expose directly to flammables.

•Do not place or keep the device near flammables.

•Keep the device away from humidity and dust.

•Do not place heavy objects on the device.

•Only use the headset with a qualified and standard microUSB cable and HDMI cable, otherwise it may be damaged.

8

	• Changes or modifications not expressly approved by
	the party responsible for compliance could void the	ENG
	user’s authority to operate the equipment.

Declaration of Confirmation

FCC NOTICE TO USERS:

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference and

(2)This device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.

9

ENG

CE NOTICE TO USERS:

Hereby, LG Electronics Inc. declares that the DWD-300 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

IC NOTICE TO USERS :

DWD-300 complies with Industry Canada license-ex- empt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

							FCC ID : BEJDWD300
IC :
		2703C-DWD300

10

		3.	Conditions
	ENG
		•	The warranty is valid only if the original receipt issued
			to the original purchaser by the dealer, specifying the
			date of purchase and serial number, is presented with
			the product to be repaired or replaced. LG Electronics
			reserves the right to refuse warranty service if this
			information has been removed or changed after the
			original purchase of the product from the dealer.
		•	If LG Electronics repairs or replaces the product, the
			repaired or replaced product shall be warranted for
			the remaining time of the original warranty period or
			for ninety (90) days from the date of repair, whichever
			is longer. Repair or replacement may involve the use
			of functionally equivalent reconditioned units. Re-
			placed parts or components will become the property
			of LG Electronics.
		•	This Warranty does not cover any failure of the prod-
			uct due to normal wear and tear, or due to misuse, in-
			cluding but not limited to use in other than the normal
			and customary manner, in accordance with instruc-
			tions for use and maintenance of the product. Nor
			does this warranty cover any failure of the product
			due to accident, modification or adjustment, acts of
			God or damage resulting from liquid.

12