Contents
Installation |
3 |
Location and function of controls |
4 |
Remote control handset / Battery installation |
|
Front panel / Rear panel |
|
Basic operation |
8 |
On and off / Programme selection |
|
Volume adjustment / Mute function |
|
On screen menus |
9 |
Menu selection |
|
SETUP menu |
10 |
Auto programme tuning |
|
Manual programme tuning |
|
Booster (option) / Fine Tuning |
|
Digital signal strength (In Digital mode only) |
|
Programme edit / Calling the programme table |
|
PICTURE menu |
15 |
PSM(Picture Status Memory) |
|
Picture adjustment / Adjusting Auto Colour Control |
|
/ Video preset |
|
AUDIO menu |
17 |
SSM (Sound Status Memory) |
|
AVL (Auto Volume Leveler) |
|
Adjusting Sound Control |
|
Front surround / Speaker adjustment |
|
Sound output selection (In Analogue mode only) |
|
Stereo reception (In Analogue mode only) |
|
TIME menu |
20 |
Auto clock setup / Manual clock setup |
|
Setting the On/Off time / Sleep timer / Auto sleep |
|
SPECIAL menu |
23 |
Main Picture Source Selection |
|
Subtitle (In Digital mode only) / Child Lock |
|
Picture format / Demo |
|
LOCK menu |
26 |
Lock setup |
|
Picture in picture (PIP) function |
27 |
On and off / Input mode selection for sub picture |
|
Swapping between main and sub pictures |
|
Programme selection for sub picture |
|
Sub picture position change |
|
Teletext |
28 |
Switch on/off / TOP text (option) |
|
FASTEXT / Special teletext functions |
|
Other functions |
31 |
EPG (Electronic Programme Guide) |
|
Connection of PC |
32 |
PC in socket / RGB-PC / DVI-PC Mode (option) |
|
Connection of external equipment |
34 |
Aerial socket / Audio/Video input sockets (option) |
|
S-Video/Audio input sockets (option) |
|
Monitor output sockets
DVD input sockets / DTV input sockets
Troubleshooting check list
2
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aer- ial and mains plugs.
Warning
To prevent fire or shock hazard, do not expose the set to rain or moisture.
Service
Never remove the back cover of the set as this can expose you to and other hazards. If the set does not operate
properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR, 4:3 picture for- mat or if a CH label is present;
the fixed image may remain visible on the screen.
DVB is a registered trademark of the DVB Project
3