LG DSN6Y User Guide

OWNER’S MANUAL

Wireless Sound Bar

Please read this manual carefully before operating your set and retain it for future reference.

MODEL

DSN6Y (DSN6Y, SPN5B-W)

2004_Rev02

www.lg.com

Getting Started2

Safety Information

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

CAUTION: No naked ame sources, such as lighted candles, should be placed on the apparatus.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions

NOTICE: For safety marking information including product identication and supply ratings, please refer to the main label on the bottom or the other surface of the product.

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits

the device.

CAUTION: Be careful to make sure children do not put their hands or any objects into the *speaker duct.

* speaker duct: A hole for plentiful bass sound on speaker cabinet. (enclosure)

Getting Started 3

CAUTION: Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.

Symbols

Refers to alternating current (AC).

Refers to direct current (DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Getting Started

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information 6 Introduction 7 Front panel 8 Rear panel 9 Remote control 12 Speakers position 13 Installing the sound bar 14 Mounting the main unit on a wall

2 Connecting

16 Organizing cables (Optional) 16 Connecting the AC Adapter 17 Wireless subwoofer and rear speaker (Sold

Separately) connection 17 – Wireless subwoofer connection 18 – Rear speakers connection (Sold

Separately) 19 – Surround sound 21 – How to Affix the Ferrite Core 22 Connecting to your TV 22 – Using an OPTICAL cable 22 – LG Sound Sync 24 – Using an HDMI cable 24 – ARC (Audio Return Channel) function 24 – What is SIMPLINK? 25 – Additional information for HDMI 26 Optional equipment connection 26 – HDMI connection 27 – OPTICAL IN connection 27 – USB connection 27 – Compatible USB devices 28 – USB device requirement 28 – Playable file

Table of Contents 5

3 Operating

30 Basic operations 30 – USB operation 31 Other operations 31 – Using your TV remote control 32 – AUTO POWER On/Off 33 – Auto function change 33 – Quick Start 34 Using a BLUETOOTH Wireless Technology 34 – About Bluetooth 34 – Bluetooth profiles 34 – Listening to Music of a Bluetooth Device 36 – Controls connected Bluetooth device 36 – Bluetooth connection lock (BT LOCK) 36 Using BLUETOOTH App 36 – Install “Music Flow Bluetooth” App onto

Your BLUETOOTH Device

37 – Activate BLUETOOTH with “Music Flow

Bluetooth” App

4 Troubleshooting

38 Troubleshooting 38 – General 39 – NOTES to use wireless 40 – NOTES to release Demo mode

5 Appendix

41 Trademarks and licenses 42 Specifications 44 Handling the Unit

Getting Started6

Introduction

Symbol used in this manual

Getting Started

Note

Indicates special notes and operating features.

Caution

Indicates cautions for preventing possible damages from abuse.

Front panel

Remote sensor

Display Window

- Display window will be darkened automatically if there is no key input for 15 seconds.

When you press any button, the display window will brighten.

(Standby)

- Switches the unit ON or OFF.

F (Function)

- Select the function and input source by pressing F repeatedly.

Input source / Function Display

Optical

ARC

LG Sound Sync (Wired)

Bluetooth BT

LG Sound Sync (Wireless) LG TV

HDMI IN HDMI

USB USB

OPT/HDMI ARC

Getting Started 7

Getting Started

(Volume)

o/p

- Adjusts volume level.

This unit will turn itself off to save electric consumption when the main unit is not connected to an external

device and is not used for 15 minutes.

Rear panel

Getting Started

Getting Started8

DC IN

- Connect to the AC adapter.

USB Port

- Connect USB memory device to the USB port on the back of the unit.

OPTICAL IN

- Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV.

HDMI IN

- Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device. You can enjoy the sound and picture from HDMI connection on an external device.

(TV ARC) HDMI OUT

- Connect the (TV ARC) HDMI OUT jack on the back of the unit to ARC jack on the TV.

Remote control

Getting Started 9

Replacement of Battery

Remove the battery cover on the rear of the remote control, and insert the battery with 4 and 5 matched correctly.

Risk of re or explosion if the battery is replaced by an incorrect type.

(Standby)

- Switches the unit ON or OFF.

VOL (Volume) o/

- Adjusts speaker volume.

(Skip/Search)

C/V

- Press C or V to go to next or previous le.

- Press and hold C or V during playback and release it at the point you want.

(Play/Pause)

- Starts playback. / Pauses playback.

yBT (Bluetooth) connection Lock: It allows you to connect a Bluetooth device only on Bluetooth

and LG TV functions. (Page 36) To turn on or off the Bluetooth connection lock, press and hold N for about 3 seconds and press it again in BT (Bluetooth) function.

Getting Started

Getting Started10

SOUND EFFECT

- Selects a sound effect mode by using SOUND EFFECT.

Getting Started

On Display Description

AI SOUND PRO

BASS BLAST or BASS BLAST+ Reinforces the bass and powerful sound.

STANDARD You can enjoy optimized sound.

DTS VIRTUAL : X You can enjoy more immersive and cinematic surround sound.

yTV remote: It allows you to control the volume of this unit by your TV remote control even by other

company’s product. (Page 31) To turn on or off the TV Remote function, press and hold SOUND EFFECT for about 3 seconds and

press it again.

Supported TV brands

LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio

(Sound tuning)

- Adjusts sound level of each speaker. Select the speaker you want to adjust by using

Adjusting rear speakers level is applied only when the rear speakers are connected.

See the page 12 for more information of speakers.

Display Description Range

WF Sub Woofer -15 ~ 6

C Center -6 ~ 6

R Rear -6 ~ 6

TRE Treble -5 ~ 5

BAS Bass -5 ~ 5

Analyzes the property of the input sound and provides the sound optimized for the content in real time.

and adjust the sound level by using VOL o/p.

ySurround sound: It allows you to enjoy surround sound with rear speakers. (Page 19)

To turn on or off the surround sound, press and hold

F (Function)

- Select the function and input source by pressing F repeatedly.

(Mute)

[

- Press [ to mute your unit. To cancel it, press [ again.

for about 3 seconds and press it again.

Getting Started 11

(Information)

- You can display various information of the input source by pressing J.

- OPT (Optical)/ARC/HDMI (HDMI IN) : Audio format

- BT (Bluetooth) : Connected Bluetooth device name

- USB : File information contained on a USB.

yAuto Power ON/OFF: It allows the unit to turn on and off automatically by input signals : Optical,

LG TV or Bluetooth (Page 32) To turn on or off AUTO POWER function, press and hold J for about 3 seconds and press it again.

REPEAT

- Press REPEAT to select desired repeat or random mode.

FOLDER W/

- Searches a folder on USB device.

Getting Started

Getting Started12

Speakers position

Getting Started

Center speaker

Front speakers

Subwoofer

Rear speakers

You can enjoy surround sound by using Wireless Rear Speaker kit. Wireless Rear Speakers Kit sold separately

(SPK8-S).

ab b

Installing the sound bar

You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc.

Place the unit in front of the TV and connect it to the device you want. (Pages 22 - 27)

You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit. Turn it slightly toward the center of the room to reduce the wall reections.

For the best surround sound, place the speakers as shown below.

Getting Started 13

Caution

yFor best performance of wireless connection

such as Bluetooth or wireless subwoofer, do not install the unit on Metallic furniture because wireless connection communicates through a module positioned on the bottom of the unit.

yBe careful not to make scratches on the

surface of the Unit /Subwoofer when installing or moving them.

Getting Started

Note

yIf the sound bar covers the remote sensor of

the TV, please separate distance between the sound bar and TV by 10 ~ 15 cm or more.

yThe illustration above may differ from actual

units.

yYou can enjoy surround sound by using

Wireless Rear Speaker kit. Wireless Rear Speakers Kit sold separately (SPK8-S).

Getting Started14

Mounting the main unit on a wall

You can mount the main unit on a wall.

Getting Started

Caution

Because it is difcult to make a connection after installing this unit, you should connect the cables before installation.

Preparation materials

Unit

Wall bracket install guide

Wall bracket

Screws

(Not supplied)

Screws (A)

Wall plug

1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position.

2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.

3. Remove the Wall bracket install guide.

4. Fix the brackets with screws (A) as shown in the illustration below.

Note

Screws (A) and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti (HUD-1 6 x 30) for the mounting.

+ 31 hidden pages