SHOCK. DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions. Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from over
heating. The openings shall be never be blocked
by placing the product on a bed, sofa, rug or other
similar surface. This product shall not be placed in
a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been adhered to.
CAUTION: This product
employs a Laser System.
To ensure proper use of this
product, please read this
owner’s manual carefully and
retain it for future reference. Shall the unit require
maintenance, contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure. To prevent
direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open.
DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
CAUTION
• The ventilation shall not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloth, curtains etc.
• No naked flame sources, such as lighted candles, shall be placed on the apparatus.
• Used batteries shall be disposed of safely and
not incinerated. Attention shall be shown to the
environment aspects of battery disposal.
• The excessive sound pressure from earphones
and headphones can cause hearing loss.
• The battery shall not be exposed to excessive
heat such as sunshine, fire or the like.
• Do not remove the battery incorporated with
product for your safety.
If you need to replace the battery, take it to the
nearest authorized LG Electronics service point
or dealer for assistance
CAUTION concerning the Power Cord
Most appliances recommend they be placed
upon a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of
this owner's manual to be certain. Do not overload
wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in
electric shock or fire. Periodically examine the cord
of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use
of the appliance, and have the cord replaced with
an exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point
where the cord exits the appliance.To disconnect
power from the mains, pull out the mains cord plug.
When installing the product, ensure that the plug is
easily accessible.
This device is equipped with a portable battery or
accumulator.
Safe way to remove the battery or the battery
from the equipment:
Remove the old battery pack, follow the steps in
reverse order than the assembly. To prevent contamination of the environment and bring on possible
threat to human and animal health, the old battery
or the battery put in the appropriate container at
designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursment
system batteries and accumulators.
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same type battery.
• Additional warning marking close to the battery if
intended to be replaced by users.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products
shall be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and
human health.
4. For more detailed information about
disposal of your old appliance, please
contact your city office, waste disposal
service or the shop where you purchased
the product.
LG Electronics hereby declares that this/
these product(s) is/are in compliance with
the essential requirements and other relevant provisions of Directive 2004/108/EC,
2006/95/EC, and 2009/125/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327
AE Almere. The Netherlands
(Tel : +31–(0)36–547–8888)
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
"DVD Logo" is a trademark of DVD format/Logo
Licensing Corporation.
DivX is a registered trademark of DivX Inc., and
is used under license.
Introduction
About the Symbol Display
“ ” may appear on your TV display during operation and indicates that the function explained in this
owner’s manual is not available on that disc.
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labelled
same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
• If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted material without permission. This product
features the copy protection function developed by
Macrovision. Copy protection signals are recorded
on some discs. When recording and playing the
pictures of these discs picture noise will appear.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Symbol Used in this Manual
A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol.
ALL
DVD
DivX
ACD
MP3
WMA
All discs and files
DVD-Video, DVD±R/RW in Video
mode or VR mode finalized
available.
SKIP (. / >): Goes to next or previous chap-
ter/track/file.
puklVvvt
tp
d
SCAN (
l l l l l l lbl l l l l l l
SETUP: Accesses or exits the setup menu.
): Searches backward or forward.
MENU: Accesses the DVD menu.
CH (+/-): Scans up or down through memorized
channels.
CH. LIST: Displays the channel list.
vV bB: Navigates the menus.
FAV (+/-): Tunes to your favorie channels.
ENTER (
): Confirms menu selection.
RETURN (O): Presses to move backwards in the
menu or exit the menu.
DISPLAY: Accesses On-Screen Display.
l l l l l l lcl l l l l l l
PAUSE/STEP (X): Pauses playback temporarily/
press repeatedly for frame-by-frame playback.
PLAY (N): Starts playback.
STOP (x): Stops playback.
Numerical buttons: Selects numbered options in
a menu.
MODE: Switches a operation mode.
CLEAR: Removes a track number on the Program
List.
l l l l l l ldl l l l l l l
TITLE: Accesses the disc’s title menu.
MARKER : Marks any point during playback.
SEARCH : Displays [Marker Search] menu.
TEXT
( ): Switches between teletext mode and
normal TV viewing.
REPEAT: Repeats a chapter, track, title or all.
A-B: Repeats a section.
INDEX/ZOOM
( ): Moves to Index screen or
page 100 in the teletext mode. Enlarges video
image in disc mode.
MIX
( ): Displays the teletext pages superim-
posed on the TV picture.
PROG.: Enters the program edit mode.
RANDOM: Plays tracks in random order.
VIRTUAL SURROUND: Presses repeatedly to
apply the various sound effects. (Refer to 14 page)
Put the battery into the Remote Control
Pinch the battery holder clip together then pull the
tab to remove the battery holder. Insert the battery
with the + facing in the same direction as the + on
the battery holder. Replace the battery holder with
battery into the Remote Control unit making sure
that it is fully inserted.
• Replace Remote Control unit battery with 3 V
micro lithium cells such as CR. 2025 or its equivalent.
• Dispose of battery safety in accordance with
local laws. Do not dispose of in fire.
Warning : The battery used in this device may
present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C (212 °F).
Replace the battery with Matsushita Elec. Ind.
Co., Ltd. (Panasonic), part no. CR. 2025 only.
Use of another battery may present a risk of fire
or explosion. Dispose of used batteries. Keep
batteries away from children. Do not disassemble or dispose of in fire.
Connect the supplied AC Adapter from the unit to a power socket.
Plug into the car’s cigarette
lighter socket.
Plug into a power source.
Plug into the “DC 12 V IN” jack.
* The actual set may differ from the drawing.
AC adapter
• This AC adapter operates on 100 - 240 V - 1.0 A 50 / 60 Hz.
• Contact an electrical parts distributor for assistance in selecting a suitable
AC plug adapter or AC cord set.
• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD.
Connecting the Automotive adapter
This unit and its automotive adapter are designed for use in vehicles that have
8.5 - 15 volt, negative ground electrical systems. This is standard for most
vehicles. If your vehicle has a different type of electrical system, the DC power
system cannot be used.
Automotive adapter
• This automotive adapter operates on DC 8.5 - 15 V.
• Contact an electrical parts distributor for assistance in selecting a suitable
automotive adapter.
• Manufactured by GRAND POWER ELECTRONIC TECHNOLOGY
(SHENZHEN) CO., LTD.
Caution
• To prevent electrical shock and possible damage to your unit or vehicle,
always unplug the automotive adapter from the cigarette lighter socket
before you remove the plug from your unit.
• A 3 amp. 250 V fuse for protection is installed in the automotive adapter.
• While the engine is being started, disconnect the automotive adapter from
the car’s cigarette lighter socket.
• Do not operate your unit when the car battery is discharged.
Peak current from the car generator may cause the DC fuse to blow.
• If the vehicle’s supply voltage drops below approximately 10 volts, your unit
may not work properly.
• Do not leave your unit in a place where the temperature exceeds 40 °C
(104 °F), or the pick-up device may be damaged.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
Digital TV is a transmission technology that replaces the traditional analogue
technique.
This means that several TV channels, radio channels and other digital services
can be transmitted on the same space as just one channel took up before.
As a consumer you get access to many more channels and services than before
at the same time as they are received with perfect picture and audio quality.
Coverage
Before buying this product it is anticipated that you have made sure that there
are digital transmissions covering your region.
Antenna / Signal source
Depending on the reception your unit may be connected to a simple indoor
antenna or to an existing outdoor antenna system. If you live in a flat you should
make sure that the digital terrestrial signals are distributed to your wall antenna
outlet. If you have your own antenna system you must make sure that it is
equipped with antennas, filter and/or amplifier that can handle those frequencies
that the digital channels are transmitted on.
Cable-TV
Please observe that this unit is not designed for the reception of regular digital
cable-TV signals (QAM-signal). Despite this, operators of smaller cable networks may have chosen to distribute the digital terrestrial signals (COFDM-signal) in the network. In this case this unit may well be used.
Check with your landlord if you are insecure about what type of TV-signal that is
provided in the wall antenna outlet.
Selecting the operation mode
You must select one of the operating modes before operating.
Press MODE repeatedly to change the mode among DVB-T, DAB or Disc.
• Disc: You should select the Disc mode before using playback functions or
disc setup setting.
• DVB-T: You should select the DVB-T mode before watching TV channel or
using TV setup setting.
• DAB: You should select the DAB mode before listening to the radio or using
radio setup setting.
You can select an item by pressing vV and change or select the setting by
pressing bB or using the numbered buttons (0-9).
v V
b B / ENTER
Adjust the settings
REMOTE
1 Display setup menu:SETUP
2 Select a desired option on the first level:
3 Move to second level:
4 Select a desired option on the second level:
5 Move to third level:
6 Change the setting:
v V
B
v V
B
v V / ENTER
Current title number/total number of titles
Current chapter number/total number of chapters
Elapsed playing time
Selected total time of current title/file
Selected audio language or channel
Selected subtitle
Selected angle/total number of angles
Adjust the settings - more you can do
When you turn on for the first time (optional)
The menu for a language selection will appear when you turn on the unit for the
first time. You must select a language to use the unit. Use vV bB to select
a language then press ENTER and the confirm menu will appear. Use b B to
select [ENTER] then press ENTER.
Adjust the language settings
Menu Language – Select a language for the Setup menu and on-screen dis-
play.
Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/
Menu.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list.
(see page 20) If you make a mistake while entering number, press CLEAR to
delete numbers then correct it.
[Off] (for Disc Subtitle): Turn off Subtitle.
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
Adjust the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The
karaoke channels on the disc mix into normal stereo sound.
Adjust the lock settings
You must set the [Area Code] option to use the lock options. Select [Area Code]
option then press B. Enter a 4-digit password then press ENTER. Enter it again
then press ENTER to verify. If you make a mistake while entering number,
press CLEAR then correct it.
If you forget your password you can reset it. First, remove the disc in the unit.
Select Lock icon on the Setup menu. Input the 6-digit number “210499” and the
password will be cleared.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digits password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Area Code – Select a code for a geographic area as the playback rating level.
This determ ines which area’s standards are used to rate DVDs controlled by
the parental lock. (See page 20)
Adjust the others settings
REC Bitrate – You can choose a bit rate for USB direct recording.
Higher bit rate gives the better sound quality but uses more space on the USB
Flash Drive. For USB direct recording, see page 17.
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This
is an official DivX Certified device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the
registration code, locate the DivX VOD section in the device setup menu. Go
to vod.divx.com with this code to complete the registration process and learn
more about DivX VOD.
[Register]: Displays the registration code of your player.
[Deregister]: Deregister your player and display the deregister code.
Press STOP (x) to stop playback, the unit records the stopped point depending
on the disc. “ Xx ” appears on the screen briefly. Press PLAY ( N) to resume
playback (from the scene point). If you press STOP (x) again or unload the disc
(“ x ” appears on the screen), the unit will clear the stopped point.
(Xx =Resume Stop, x =Complete Stop)
The resume point may be cleared when a button is pressed. (for example:
POWER, OPEN, etc)
Playing a DVD that has a menu
Most DVD now have menus which load first before the film begins to play. You
can navigate these menus using vV bB or number button to highlight an
option. Press ENTER to select.
Playing a DVD VR disc
This unit will play DVD-RW disc that is recorded using the Video Recording
(VR) format. When you insert a disc DVD VR disc, the menu will appear on the
screen. Use vV to select a title then press PLAY ( N). To display DVD-VR
menu, press MENU or TITLE.
Some DVD-VR disc are made with CPRM data by DVD RECORDER. The unit
does not support these kinds of discs.
.
DVD
N PLAY
x STOP
DivX
ALL
ACD
WMA
DivX
ACD
MP3
(m or MM)
Skip to the next/previous chapter/track/file
Press SKIP (>) to move to the next chapter/track/file.
Press SKIP (.) to return to the beginning of the current chapter/track/file.
Press SKIP (.) twice briefly to step back to the previous chapter/track/file.
Pause a playback
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue
playback.
Frame-by-Frame playback
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
Playing repeatedly
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [Off].
Fast forward or fast reverse
Press SCAN
You can change the various playback speed by pressing SCAN
repeatedly. Press PLAY ( N) to continue play at normal speed.
- DVD, DivX: mmb P mm P mb P m / M p MB p MM p MMB
- ACD, WMA, MP3: mx8 P mx4 P mx2 / Mx2 p Mx4 p Mx8
(m or M)
Repeating a specific portion (A-B)
Press A-B at the beginning of the portion you wish to repeat and again at the
end of the portion. Your selected portion will be repeated continually.
To return to normal playback, press A-B to select [Off].
Selecting a subtitle language
During playback, press SUBTITLE ( ) repeatedly to select a desired subtitle
language.
Watching from a different angle
If the angle indicator appears on the screen for a moment, you can select a different camera angle by pressing ANGLE ( ) repeatedly.
ALL
DivX
DVD
ALL
DivX
DVD
to play fast forward or fast reverse during playback.
During playback, press AUDIO ( )repeatedly to switch between the available
audio languages, channels or encoding methods.
Viewing the title menu
Press TITLE to display the disc's title menu, if available.
Viewing the DVD menu
Press MENU to display the disc's title menu, if available.
Slow down the playing speed
While the playback is paused, press
back. You can change the various playback speed by pressing
SCAN
(MM
play at normal speed.
) repeatedly to play in slow motion. Press PLAY ( N) to continue
Watching a enlarged video image
During playback or pause mode, press ZOOM repeatedly to select zoom
mode. You can move through the zoomed picture using vVb B buttons. Press
CLEAR to exit.
(100 % p 200 % p 300 % p 400 % p 100 %)
Starting play from selected time
Searches for the starting point of entered time code.
clock icon. Enter a time then press ENTER.
hours, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If you
enter the wrong number, press CLEAR to enter again.
Playing in random order
During playback or in stop mode, press RANDOM for playback in random order.
Press RANDOM again to return to normal playback.
Mark a scene on a disc
You can mark a position on a disc to return to at the place. Simply press
MARKER at the desired position. The marker icon will appear on-screen briefly.
Repeat to place up to nine markers.
Also you can recall or clear the positions. Press SEARCH and [Marker Search]
menu. Use b or B to select a desired marker on the menu, then press ENTER
to recall it or CLEAR to clear it.
ACD
Last Scene Memory
This unit memorizes last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the player or switch off the
unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
DVD
Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five
minutes. If the Screen Saver is displayed for five minutes, the unit automatically
turns itself off.
Virtual Surround
You can enjoy the surround sound simply by selecting one of the pre-programmed sound field according to the program you want to listen to. Each time
you press VIRTUAL SURROUND, the sound mode is changed as follows:
(Normal t Concert t Hall t Arena)
Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG
When playing a disc or USB Flash Drive contained with DivX, MP3/WMA and
JPEG files together, you can select which menu of files you would like to play
by pressing TITLE.
To go directly to file and play, enter the file number using the numbered buttons (0-9).
3Start the playback:
4Stop the playback:
REMOTE
v V, MENU
N PLAY
x STOP
Listening to Music Disc or files
1Insert a disc: -
2Select a music title from the menu:
To go directly to track/file and play, enter the track/
file number using the numbered buttons (0-9).
3
Start the playback:
4
Stop the playback:
REMOTE
v V, MENU
N PLAY
x STOP
Playing a DivX movie file - more you can do
Changing the character set to display DivX® subtitle correctly
Press and hold SUBTITLE for 3 seconds during playback. The language code
will appear. Press b B to select another language code until the subtitle is displayed properly and then press ENTER.
DivX file requirement
DivX file compatibility with this player is limited as follows:
• Available resolution size: 720 x 576 (W x H) pixel.
• The file names of DivX and subtitle are limited to 20 characters.
• DivX file extensions: “.avi”, “.mpg”, “.mpeg”
• Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)
• Sampling frequency: within 8 to 48 kHz (MP3), within 32 to 48 kHz (WMA)
• Bit rate: within 8 to 320 kbps (MP3), within 32 to 192 kbps (WMA),
less than 4 Mbps (DivX file)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 600 (total number of files and folders)
• This player does not support the file that are recorded with GMC
Those are video encoding techniques in MPEG4 standard, like DivX has.
*1 GMC - Global Motion Compensation
*2 Qpel - Quarter pixel
*1
or Qpel*2.
Listening to Music Disc or files - more you can
do
Creating your own program
You can play the contents of a disc in the order you want by arranging the order
of the music titles on the disc. To add music titles on the program list, press
PROG. to enter the program edit mode (
Select a desired music on the [List] then press ENTER to add the music to the
program list. Select a music from the program list then press ENTER to start
programmed playback. To clear a music from the program list, select the music
you want to clear then press CLEAR in program edit mode. To clear all music
from the program list, select [Clear All] then press ENTER in program edit
mode. The program is cleared when the disc is removed or the unit is turned
off.
Displaying file information (ID3 TAG)
While playing a MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly.
MP3/WMA music file requirement
MP3/WMA compatibility with this unit is limited as follows:
• File extensions: “.mp3”, “.wma”
• Sampling frequency: within 8 to 48 kHz (MP3), within 32 to 48 kHz (WMA)
• Bit rate: within 8 to 320 kbps (MP3), within 32 to 192 kbps (WMA)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 600 (total number of files and folders)
To go directly to file and play, enter the file number using the numbered buttons (0-9).
Display the selected file in full screen:
3
Photo information displays on the screen. If you
want to hide it, press RETURN (O).
4Return to the menu:
Viewing photo files - more you can do
Viewing photo files as a slide show
Use vV bB to highlight () icon then press ENTER to start slide show.
You can change slide show speed using b B when () icon is highlighted.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
Rotate a photo
Use vV to rotate the photo in full screen counter clockwise or clockwise while
viewing a photo in full screen.
Pause a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue
the slide show.
Listening to music during slide show
You can listen to music during slide show, if the disc contain music and photo
files together. Use vV b B to highlight () icon then press ENTER to start
slide show.
Photo file requirements
JPEG file compatibility with this unit is limited as follows:
• File extensions: “.jpg”
• Photo size: Less than 2 MB recommended
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Folders: Less than 600 (total number of files and folders)
v V, MENU
N PLAY
x STOP
Using an USB Flash Drive
You can play MP3/WMA/JPEG/DivX files in the USB Flash Drive with version
1.1/2.0.
REMOTE
Connect an USB Flash Drive to the USB
1
port on the unit:
Display the menu to select the USB
2
operation mode:
3Select [USB]:
4Select a file or folder:
5Play the file or folder:
6Remove the USB Flash Drive:-
Notes an USB Flash Drive
• You can switch among [DISC], [TV] and [USB] mode using MODE button.
• Do not extract the USB device in operating.
• We recommend that you back up your important files in the USB Flash Drive
to protect against accidental loss.
• If you use a USB extension cable or USB HUB, the USB device might not be
recognized.
• Music files (MP3/WMA), photo files (JPEG) and DivX files can be played.
For details of operations on each files, refer to relevant pages.
• Maximum Files/USB Flash Drive: Less than 600 (total number of files and
folders)
• The USB function of this unit does not support all kinds of USB devices.
• Digital camera and mobile phone are not supported.
• USB Port of the unit cannot be connected to PC. The unit cannot be used as
a storage device.
Connect a USB Flash Drive to the unit before recording.
Set [REC Bitrate] option as required. (Refer to 12 page)
REMOTE
1Insert an Audio CD: -
Select a track:
2
To go directly to track and play, enter the track
number using the numbered buttons (0-9).
3Start the recording:
4Stop the recording:
Recordable mode
You can record a desired track or all of the tracks in Audio CD to USB Flash
Drive.
• For track recording: Press AUDIO in play, pause or resume stop mode.
• For disc recording: Press AUDIO in complete stop mode.
• For program list recording: In stop mode, press AUDIO after selecting a track
on the program list.
Notes a USB direct Recording
• The recording is available only for Audio CD tracks.
• If you use this function, the “CD_REC” folder will be created automatically in
the USB Flash Driver then the music file(s) is saved in it.
• If you remove USB Flash Drive or turn off the while recording, it can make a
malfunction.
• If the remaining space on the USB Flash Drive is insufficient, the recording is
not available. To increase the free space, delete files in it using your PC.
• CD-G disc and Audio CDs encoded in DTS cannot be recorded.
• External HDD, Multi Card reader, Multi Partition USB, Locked device and
MP3 player is not supported.
• You can set the recording speed pressing AUDIO during USB direct
recording.
- X1 Track: While normal speed recording, you can listen to the music.
- X4 Track: While 4X speed recording, you can not listen to the music.
TV Channel / Radio Channel – Displays the TV or Radio channel list. Use B to
select the [Select] then press ENTER to display the channel list.
You can also display the channel list pressing CH. LIST while in DVB-T or DAB
mode. While displaying channel list, press v V to display favorite channel list
(See page 19).
Channel Class – This option allows you to set the favorite channel.
Use v V select the a channel and press ENTER to set the favorite class on
each channel. (shows Fav icon on top of the screen)
Channel Edit – This option allows you to edit the channels.
[Add]: This option allows you to add a new channel. Use v V to select the
channel and press
ENTER to add the selected channel.
[Select]: This option allows you to delete or move the preset channels.
Use b B to move to [Move] or [Delete] column.
To move the location of the preset channel, use v V to highlight the chan-
nel you want to move on the [Move] column and press
ENTER.
Use v V to move the selected channel to the desired position and then
press ENTER to complete move.
To delete a preset channel, use v V to highlight the channel you want to
delete on the [Delete] column and press ENTER. The x marked channel
will not be displayed on the channel list. Press ENTER again to clear the x
mark.
Aspect Ratio – Selects the aspects ratio of the connected TV.
[4:3 PS]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on the entire screen cuts off the portions that do not fit.
[4:3 LB]: Select this when connecting to a standard 4:3 screen TV and
prefer the wide picture with bands on the upper and lower portions of the
screen.
[16:9]: Select this when connecting to a wide-screen TV.
Adjust the time settings
Set the channel that broadcasts a clock signal and the clock will be set automatically. If the clock that has automatically set is different with your local clock,
you can adjust time using [Time Offset] option (For example, when summer time
is started in local area.). Press B to select [Time Offset] option. Press v V to
select a value then press ENTER (Off, +/-30 min, +/-60 min, +/-90 min, +/-120
min). Select “Off” if the clock that has automatically set is identified with your
local clock.
Adjust the lock settings
To access the Change Pin, Channel Lock, Parental Guidance options, you must
enter the 4-digit password. If you have not yet entered a password you are
prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make
a mistake while entering number, press CLEAR to delete numbers.
If you forget your password, you can reset it. Display the SETUP menu. Input
‘210499’ and press ENTER. The password has now been cleared.
Change Pin – Changes the password.
Enter the new password twice after entering the current password.
Channel Lock –You can lock certain unsuitable channels to prevent children
from accessing them, use v V to select a channel you want to lock and then
press ENTER to lock the channel. If you want to watch a locked channel. You
should input the password.
Parental Guidance – Blocks TV programs that you or your family may not wish
to watch, based on the rating scheme set.
Select a rating then press ENTER.
[3 Years] - [18 Years]: Rating [3 Years] has the most restrictions and rating
[18 Years] is the least restrictive.
OTA (Over the Air) – Your unit is able to keep the built-in digital tuner up to
date with the latest software. The unit does it automatically at regular interval.
While the unit is in updating, there may have a disruption in reception for a few
hours. The reception should return to normal after the update is complete. This
unit must be plugged into AC power to receive updates. Do not unplug your unit
while an update is in progress.
[ON] : Updates the software when this unit is turned on.
[OFF] : Select this if you do not want to do not use this function.
Default Setting – You can reset the unit to its original factory settings. Press
ENTER while [Select] option is selected. Select [Yes] on the pop-up message to
return to the default setting.
Displaying the channel information
In DVB-T or DAB mode, press DISPLAY to display the information such as
channel number, station name and time displayed on-screen. If you press
DISPLAY twice, the signal strength and quality will appear on the screen.
Changing the Channel
Use CH - / + on the remote control to change the channel in memory to
select a channel directly.
Changing the Channel with Channel list
You can display channel list using the CH. LIST button and switch into other
channel on the channel list.
In DVB-T or DAB mode, press CH. LIST to display the channel list.
Select your desired channel using the v V and press ENTER to change another
channel. You can switch the channel list to All or Favorite by pressing b B.
Viewing a Teletext service
Teletext is a free broadcasting service by some TV stations which gives up-tothe-minute information on news, weather, television programs, share prices and
many other topics.
The unit gives you access to teletext which is greatly improved in various
aspects such as text and graphics. This teletext can be accessed by special
teletext services and specific services which broadcast teletext.
In DVB-T mode, use numbered (0-9) buttons or CH - / + on the remote control
to change the channel which broadcast teletext. Press TEXT to access on the
teletext.
Follow the indications on teletext and move onto the next or previous step by
pressing color (Red or Green) or v V buttons.
Press TEXT or RETURN (O) to turn the teletext off and return to TV viewing
Selecting teletext page
Enter the desired page number as a three digit number with the numbered
buttons. If during selection you press a wrong number, you must complete the
three digit number and then enter the correct page number again.
Use Red/Green buttons to move up and down pages.
Special Teletext Functions
MIX button – Displays the teletext pages superimposed on the TV picture.
To switch the TV picture off press this button again.
INDEX/ZOOM button – The teletext pages are colour coded along the bottom
of the screen and are selected by pressing the corresponding coloured button.
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
LanguageCode
Afar 6565
Afrikaans 6570
Albanian 8381
Ameharic 6577
Arabic 6582
Armenian 7289
Assamese 6583
Aymara 6588
Azerbaijani 6590
Bashkir 6665
Basque 6985
Bengali, Bangla 6678
Bhutani 6890
Bihari 6672
Breton 6682
Bulgarian 6671
Burmese 7789
Byelorussian 6669
Chinese 9072
LanguageCode
Croatian 7282
Czech 6783
Danish 6865
Dutch 7876
English 6978
Esperanto 6979
Estonian 6984
Faroese 7079
Fiji 7074
Finnish 7073
French 7082
Frisian 7089
Galician 7176
Georgian 7565
German 6869
Greek 6976
Greenlandic 7576
Guarani 7178
Gujarati 7185
LanguageCode
Hausa 7265
Hebrew 7387
Hindi 7273
Hungarian 7285
Icelandic 7383
Indonesian 7378
Interlingua 7365
Irish 7165
Italian 7384
Japanese 7465
Kannada 7578
Kashmiri 7583
Kazakh 7575
Kirghiz 7589
Korean 7579
Kurdish 7585
Laothian 7679
Latin 7665
Latvian, Lettish 7686
LanguageCode
Lingala 7678
Lithuanian 7684
Macedonian 7775
Malagasy 7771
Malay 7783
Malayalam 7776
Maori 7773
Marathi 7782
Moldavian 7779
Mongolian 7778
Nauru 7865
Nepali 7869
Norwegian 7879
Oriya 7982
Panjabi 8065
Pashto, Pushto 8083
Persian 7065
Polish 8076
Portuguese 8084
Area Codes
Choose a area code from this list.
AreaCode
Afghanistan AF
Argentina AR
Australia AU
Austria AT
Belgium BE
Bhutan BT
Bolivia BO
Brazil BR
Cambodia KH
Canada CA
Chile CL
China CN
Colombia CO
Congo CG
AreaCode
Costa Rica CR
Croatia HR
Czech Republic CZ
Denmark DK
Ecuador EC
Egypt EG
El Salvador SV
Ethiopia ET
Fiji FJ
Finland FI
France FR
Germany DE
Great Britain GB
Greece GR
AreaCode
Greenland GL
Hong Kong HK
Hungary HU
India IN
Indonesia ID
Israel IL
Italy IT
Jamaica JM
Japan JP
Kenya KE
Kuwait KW
Libya LY
Luxembourg LU
Malaysia MY
AreaCode
Maldives MV
Mexico MX
Monaco MC
Mongolia MN
Morocco MA
Nepal NP
Netherlands NL
Netherlands Antilles AN
New Zealand NZ
Nigeria NG
Norway NO
Oman OM
Pakistan PK
Panama PA
Paraguay PY
Philippines PH
Poland PL
Portugal PT
Romania RO
Russian Federation RU
Saudi Arabia SA
Senegal SN
Singapore SG
Slovak Republic SK
Slovenia SI
South Africa ZA
South Korea KR
Spain ES
Sri Lanka LK
Sweden SE
Switzerland CH
Taiwan TW
Thailand TH
Turkey TR
Uganda UG
Ukraine UA
United States US
Uruguay UY
Uzbekistan UZ
Vietnam VN
Zimbabwe ZW
No power.The power cord is disconnected.Plug the power cord into the wall
The battery is discharged.Recharge the battery.
The power is on,
but the unit does
not work.
No picture.The TV is not set to receive the
No sound.The equipment connected with
The unit does
not start playback.
The remote
control does not
work properly.
No disc is inserted.Insert a disc.
signal from the unit.
The video cable is not connected
securely.
the audio cable is not set to
receive the signal from the unit.
The volume is set to minimum.Use the volume controller to
The AUDIO options are set to the
wrong position.
An unplayable disc is inserted.Insert a playable disc. (Check the
The rating level is set.Change the rating level.
The remote control is not pointed
at the remote sensor on the unit.
The remote control is too far from
the unit.
Designs and specifications are subject to change without prior notice.
outlet securely.
Select the appropriate video input
mode on the TV.
Connect the video cable securely.
Select the correct input mode of
the audio amplifier.
adjust the volume.
Set the AUDIO settings to the
correct position.
disc type and regional code.)
Point the remote control at the
remote sensor of the unit.
Operate the remote control closer
to the unit.
Specifications
General
Power requirements 12 V 2.0 A
External Dimensions (237 x 54 x 149) mm (W x H x D)
Net Weight (Approx.) DP570T : 1.1 kg
(With a battery) DP571T : 1.2 kg
Operating temperature 0 °C to 40 °C
Operating humidity 5 % to 90 %
Laser Semiconductor laser
TV system DVB-T Standard Compliant
Signal system PAL
Connectors
Audio/Video Output ø 3.5 mm mini jack x 1
- Video: 1.0 V (p-p), 75 Ω, sync negative
- Audio: 1.5 Vrms (1 KHz, 0 dB)
Earphone terminal ø 3.5 mm stereo mini jack x 2
Antenna Input 75 Ω (VHF / UHF)
Input
USB IN 4 pin (USB 2.0 / 1.1 standard)
Bus power supply 5 V 500 mA
Liquid Crystal Display
Panel size 17.8 cm (diagonal)
Projection system R.G.B. stripe
Driving system TFT active matrix
Resolution 480 x 234 (WQVGA)
Enjoying in a car with
the Headrest Mounting
Bracket
You can enjoy video in the back seat
attaching the unit to the back of the front
seat.
Warnings
• The driver must not operate this unit
while the vehicle is moving.
Do not operate this unit where it can be
viewed by the driver.
Driver operation or viewing of this unit
while the vehicle is moving will cause
distraction which may result in serious
accident and personal injury or property
damage.
• Do not attach or detach while driving,
and do not attach in the following locations, otherwise it may result in injury or
traffic accidents:
– anywhere other than the back of the
seat
– in a location that interferes with the
driver’s view or operation of the car
– in a location that interferes with the
operation of an airbag
– in a location that interferes with the
driving instruments
• Depending on the type of headrest, you
may not be able to attach the bracket.
Separate the headrest.
(Refer to your car’s user
guide.)
Install the cradle as shown in
the figure.
Note: If you may not be able
to install the headrest cradle
because of the pipe thickness
of your headrest, extend the
cradle loosing its screws and
reinstall it.
Release
knobs
Fixing screws
Vertical
adjusting screw
Horizontal
adjusting screw
Fit the headrest mounting bracket joined the unit to the
cradle.
a
c
bd
Adjust the horizontal and vertical
angles as you
want and enjoy the
movies.
22
cm
or
less
Put the headrest
mounting bracket on
the back of unit and
fix it using the fixing
screws.
Note: Before fixing
bracket, attach the battery pack.
Note: When you adjust angles, loose the adjusting
screws. Adjusting by force can lead the damage to the
inside of your headrest mounting bracket.