LG DP392G-P User manual

Page 1
ENGLISH
P/NO : MFL56732864
DP-1600
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 1
Page 2
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC-
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to consti­tute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the man­ufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufactur­er's instruction has been adhered to.
CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION
• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Used batteries should be disposed of safely and not incinerated. Attention should be shown to the environment aspects of battery disposal.
• Use the apparatus in tropical and moderate climates only.
• The excessive sound pressure from earphones and headphones can cause hearing loss.
• The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates dam­age or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
This product is manufactured to comply with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
European representative: LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-036-547-8940)
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 2
Page 3
3
About the Symbol Display
” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that disc.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play.
• If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection sig­nals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright pro­tection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
DVD-VIDEO: Discs such as movies that can be purchased or rented.
DVD-R: Video mode and finalized only
DVD-RW: VR mode, Video mode and finalized only
DVD+R: Video mode only
DVD+RW: Video mode only
Audio CD: Music CDs or CD-R/CD-RW in music CD
format that can be purchased.
This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CD-RW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software.
Logo
Types of Playable Discs
Type
Safety Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Power connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Selecting the operation mode . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
Displaying Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12
Playing a DivX movie file . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Listening to Music Disc or files . . . . . . . . . . . . . . . . . . . . . . . . .13
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Watching an AV input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using a USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using an External Memory Card . . . . . . . . . . . . . . . . . . . . . . . .15
Using an Internal Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Copying a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Editing a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Contents
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 3
Page 4
4
Main Unit
a POWER (1): Turn the unit ON or OFF. b MENU: Accesses the DVD menu. c SETUP: Accesses or exits the setup menu. d DISPLAY: Accesses On-Screen Display. e LCD MODE: Selects the LCD mode. (16:9,
4:3 or Off)
f MODE: Selects an operation mode. g COLOR/BRIGHT: Displays the Brightness or
Color menu for LCD display. To adjust the color or brightness of the LCD display, press COLOR/BRIGHT repeatedly to display the Brightness or Color menu then use b / B to adjust the value. Press ENTER to con­firm the adjustment.
h VOL (+/-): Adjusts the volume level of the built-
in speaker and earphones.
i Battery charge and power indicator
• The indicator turns red while charging and changes to green color when the charging is complete. (Refer to page 8 for details.)
• The indicator turns green for a few seconds when the unit is turned on.
j Joystick: Use the joystick to select an item in
the menu. Press the joystick to confirm the menu selection.
k Remote sensor: Point the remote control here. l x (Stop): Stops playback. m Memory card slot
Insert a memory card (SD, MMC or MS).
n N / X (PLAY / PAUSE): Starts playback.
Pause playback temporarily, press again to exit pause mode.
o . (Skip): Search backward* or returns to
the beginning of current chapter or track or go to the previous chapter or track. * Press and hold button for about two sec-
onds.
p > (Skip): Search forward* or Go to next
chapter or track. * Press and hold button for about two sec-
onds.
q USB adapter connector: Connect the sup-
plied USB adapter cable then connect a USB device.
r AV IN/OUT jack: Connect a TV or an external
device.
s Earphones jacks: Connect earphones here. t DC IN connector: Connect the AC adapter or
automotive adapter.
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 4
Page 5
5
a
POWER (1): Switches the unit ON or OFF. AUDIO ( ): Selects an audio language or audio
channel.
SUBTITLE ( ): Selects a subtitle language.
ANGLE ( ): Selects a DVD camera angle, if
available.
SKIP/SEARCH (. / >): Search* backward / forward. Go to next or previous chapter/track. * Press and hold button for about two seconds.
SLOW (t / T): Reverse/ Forward slow playback.
b
SETUP: Accesses or exits the setup menu. MENU: Accesses the DVD menu. vV b B: Navigates the menus.
ENTER ( ): Confirms menu selection. RETURN (O): Press to move backwards in the
menu or exit the menu. DISPLAY: Accesses On-Screen Display.
c
PAUSE/STEP (X): Pauses playback temporarily/ press repeatedly for frame-by-frame playback.
PLAY (N): Starts playback. STOP (x): Stops playback. Numerical buttons: Selects numbered options in a
menu. Character buttons: Selects a desired character
by pressing a button repeatedly.
PROG.: Enters the program edit mode. CLEAR: Removes a track number on the Program
List.
d
TITLE: Access the disc’s title menu. REPEAT: Repeats a chapter, track, title or all. A-B: Repeats a section. ZOOM: Enlarges video image. MARKER : Marks any point during playback. SEARCH : Displays [Marker Search] menu. RANDOM: Plays tracks in random order. MODE: Selects an operation mode.
Put the battery into the Remote Control
Pinch the battery holder clip together then pull the tab to remove the battery holder. Insert the battery with the + facing in the same direction as the + on the battery holder. Replace the battery holder with battery into the Remote Control unit making sure that it is fully inserted.
• Replace Remote Control unit battery with 3V micro lithium cells such as CR. 2025 or its equiv­alent.
• Dispose of battery safety in accordance with local laws. Do not dispose of in fire.
Warning for replaceable lithium battery
• danger of explosion if battery incorrectly replaced.
• replace only with the same type battery.
• additional warning marking close to the battery if intended to be replaced by users.
a
b
c
d
Remote Control
Warning : The battery used in this device may
present a fire or chemical burn hazard if mis­treated. Do not recharge, disassemble, inciner­ate, or heat above 100 °C (212 °F). Replace the battery with Matsushita Elec. Ind. Co., Ltd. (Panasonic), part no. CR. 2025 only. Use of another battery may present a risk of fire or explosion. Dispose of used batteries. Keep batteries away from children. Do not disassem­ble or dispose of in fire.
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 5
Page 6
6
Getting Started
Inserting or removing a memory card
Insert a memory card to the memory card slot on the unit. To withdraw the memory card from the slot, press on the center of the memory card then withdraw it carefully.
Card useable on this unit
• Secure Digital Card (SD)
• Multi Media Card (MMC)
• Memory Stick (MS)
• This unit supports only memory card with FAT12, FAT16 or FAT32 format.
• Only use the memory cards recommended above.
• The card will only fit in one direction; do not force it. The card should fit snugly when properly inserted.
• Any memory card may not be available on the unit.
• Do not extract the memory card while operating (play, copy, etc.).
Connecting a USB Flash Drive
Connect the small end of the USB adapter cable to the USB port on the unit. Connect a USB Flash Drive to the other end of the USB adapter.
• Music files (MP3/WMA), photo files (JPEG) and DivX files can be played. For details of operation on each file type, refer to relevant pages.
• Maximum Files/USB Flash Drive: Less than 650 (total number of files and folders)
• This unit supports only USB Device with FAT16 or FAT32 format.
• USB Flash Drive with version 1.1 only.
• A USB Flash Drive which requires additional program installation when you have connected it to a PC, is not supported.
• Do not extract the USB device while in operation.
• We recommend that you back up your important files in the USB Flash Drive to protect against accidental loss.
• If you use a USB extension cable or USB HUB, the USB device might not be recognized.
• The USB function of this unit does not support all kinds of USB devices.
• Digital camera and mobile phone are not supported.
USB Flash Drive
USB Adapter Cable
To USB port
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 6
SD
or
MMC
or
MS
Page 7
7
Power connections
Connecting the Power Cable
Connect the supplied power cable from the unit to a power socket.
AC adapter
• This AC adapter operates on 100-240V~ 1A 50/60Hz.
• Contact an electrical parts distributor for assistance in selecting a suitable AC plug adapter or AC cord set.
• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD
Connect the Automotive adapter
This unit and its automotive adapter are designed for use in vehicles that have
8.5-16 volt, negative ground electrical systems. This is standard for most vehi-
cles. If your vehicle has a different type of electrical system, the DC power sys­tem cannot be used.
Automotive adapter
• This automotive adapter operates on DC 8.5-16V.
• Contact an electrical parts distributor for assistance in selecting a suitable automotive adapter.
Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD
.
Caution
• To prevent electrical shock and possible damage to your unit or vehicle, always unplug the automotive adapter from the cigarette lighter socket before you remove the plug from your unit.
• A 3 amp. 250V fuse for protection is installed in the automotive adapter.
• While the engine is being started, disconnect the automotive adapter from the car’s cigarette lighter socket.
Do not operate your unit when the car battery is discharged. Peak current from the car generator may cause the DC fuse to blow.
• If the vehicle’s supply voltage drops below approximately 10 volts, your unit may not work properly.
• Do not leave your unit in a place where the temperature exceeds 70°C (158°F), or the pick-up device may be damaged. Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.
Plug into the “DC 12V IN” jack.
Plug into the
“DC 12V IN”
jack.
Plug into the car’s
cigarette lighter
socket.
Attach the power plug to the body of the AC adapter. (The actual set may differ from the drawing.)
Power cord
release knob
Plug into a power source.
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 7
Page 8
8
Hooking up the unit
Audio and Video Connection for AV IN or AV OUT
Connect the AV IN/OUT jack on the unit to the corresponding input or output jacks on your TV or an external device using the supplied AV cable as shown below.
Selecting the operation mode
You need to select an operation mode before using this unit. Press MODE on the unit and the operation mode selection menu appears. Use b / B to select a mode then press ENTER.
• [DISC]: To playback the inserted disc.
• [EXTERNAL]: To playback the file(s) in the connected USB Flash Drive or external memory card. After selecting [EXTERNAL], select [USB] for USB Flash Drive or [Memory Card] for the external memory card.
• [INTERNAL]: To playback the file(s) in the internal memory.
• [AV IN]: To watch a video/audio signal from the external device using this unit.
Mixed media
– DivX, MP3/WMA and JPEG
When playing media containing with DivX, MP3/WMA and JPEG files together, you can select which menu of files you would like to play by pressing TITLE.
Rechargeable battery
• Its internal rechargeable battery provides you with the freedom to pass it around and play the files without the power cord.
• The internal rechargeable battery will start charging only when the unit is turned off and the AC adapter is connected to a power outlet.
• The charging stops if you turn on the unit.
• The charging will take approximately 3 hour 30 minutes.
• Operating time on battery: approximately 3 hour 30 minutes. The operating time on battery may vary depending on the battery status, operational status and environment conditions.
• The battery indicator will turn red while charging. Once the charging is com­plete, the indicator light changes to green.
• When the remaining time of the battery power is under a few minutes, “Check Battery” will appear on the screen.
Plug into the
“AV IN/OUT” jack.
TV or the external device
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 8
Page 9
9
Adjust the settings - more you can do
When you turn on for the first time
The menu for language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use bB to select [Enter] then press ENTER.
Adjust the language settings
Menu Language – Select a language for the Setup menu and on-screen dis-
play.
Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/ Menu.
[Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list. (see page 17) If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [Off] (for Disc Subtitle): Turn off Subtitle.
Adjust the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen.
[LetterBox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
JPEG Effect– Specify the transition style between pictures in a slideshow.
Adjust the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc, mix into normal stereo sound.
Adjust the lock settings
You must set the [Area Code] option to use the lock options. Select [Area Code] option then press B. Enter a 4-digit password then press ENTER. Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. If you forget your password you can reset it. Display setup menu then input the 6-digit number “210499” and the password will be cleared.
Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password.
Area Code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. (See page 17)
Adjust the settings
1 Display setup menu: SETUP 2 Select a desired option on the first level: v V 3 Move to second level: B 4 Select a desired option on the second level: v V 5 Move to third level: B 6 Change the setting: v V / ENTER
BUTTON
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 9
Page 10
10
Adjust the others settings
PBC (Playback Control) – Playback control provides special navigation
features that are available on some disc. Select [On] to use this feature.
DivX(R) VOD – We provide you with the DivX® VOD (Video On Demand) regis­tration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. Press ENTER when [Select] icon is highlighted and you can view the registra­tion code of the unit. All the downloaded videos from DivX® VOD can only be played back on this unit.
Format – Initializes the internal memory: everything recorded on the the internal memory will be erased. Press ENTER when [Select] icon is highlighted then select [Yes] and press
ENTER.
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by pressing bB.
Current title (or track) number/total number of titles (or tracks)
Current chapter number/total number of chapters Elapsed playing time
Selected audio language or channel
Selected subtitle Selected angle/total number of angles
You can check the battery charge status by pressing DISPLAY during playback when the DC IN jack is not connected.
Full Low Recharge
Symbol Used in this Manual
A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol.
All discs and files Audio CDs
DVD and finalized DVD±R/RW MP3 files
DivX files WMA files
WMA
DivX
MP3DVD
ACDALL
Displaying Disc Information
1 Press DISPLAY during playback: DISPLAY 2 Select an item: v V 3 Adjust the Display menu settings: bB / ENTER
4 To return the exit: DISPLAY
BUTTON
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 10
Page 11
11
Playing a Disc - more you can do
Insert a disc
Open the LCD panel as shown below then insert a disc. Close the LCD panel.
Stop playback
Press STOP (x) to stop playback, the unit records the stopped point depending on the disc. “ Xx ” appears on the screen briefly. Press PLAY ( N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“ x ” appears on the screen), the unit will clear the stopped point. (Xx =Resume Stop, x =Complete Stop) The resume point may be cleared when a button is pressed. (for example: POWER, etc)
Playing a DVD that has a menu
Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B or number button to highlight an option. Press ENTER to select.
Playing a DVD VR disc
This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. When you insert a disc DVD VR disc, the menu will appear on the screen. Use vV to select a title then press PLAY (
N). To display DVD-VR
menu, press MENU or TITLE. Some DVD-VR disc are made with CPRM data by DVD RECORDER. The unit does not support these kinds of discs.
Skip to the next/previous chapter/track/file
Press SKIP (>) to move to the next chapter/track/file. Press SKIP (.) to return to the beginning of the current chapter/track/file. Press SKIP (.) twice briefly to step back to the previous chapter/track/file.
Pause a playback
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue playback.
Frame-by-Frame playback
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
Playing repeatedly
Press REPEAT repeatedly to select an item to be repeated. The current title, chapter or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [Off].
Fast forward or fast reverse
Press and hold SKIP (. or >) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing and holding
SKIP (. or >) repeatedly. Press PLAY (
N) to continue playing at normal
speed.
MP3WMAACDDivXDVD
ALL
DivXDVD
ALL
ALL
DVD
Playing a Disc
BUTTON
1 Insert a Disc: -
2 Select an operation mode (page 8): MODE 3 Start playback: N PLAY
4 Adjust the volume: VOLUME 5 To stop playback: x STOP
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 11
Page 12
12
Repeating a specific portion (A-B)
Press A-B at the beginning of the portion you wish to repeat and again at the end of the portion. Your selected portion will be repeated continually. To return to normal playback, press A-B to select [Off].
Selecting a subtitle language
During playback, press SUBTITLE ( ) repeatedly to select a desired subtitle language.
Watching from a different angle
If the angle indicator appears on the screen for a moment, you can select a dif­ferent camera angle by pressing ANGLE ( ) repeatedly.
Hearing different audio
During playback, press AUDIO ( ) repeatedly to switch between the available audio languages, channels or encoding methods.
Slow down the playing speed ( : Forward only)
During playback, press SLOW (t or T) to slow down reverse or forward play­back. You can change the various playback speed by pressing SLOW (t or T) repeatedly. Press PLAY (N) to continue playing at normal speed.
Watching an enlarged video image
During playback or pause mode, press ZOOM repeatedly to select zoom mode. You can move through the zoomed picture using vVb B buttons. Press
CLEAR to exit.
Viewing the title menu
Press TITLE to display the disc's title menu, if available.
Viewing the DVD menu
Press MENU to display the disc menu, if available.
Starting play from selected time
Searches for the starting point of entered time code.
Press DISPLAY then select
clock icon. Enter a time then press ENTER.
For example, to find a scene at 1 hours, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If you enter the wrong number, press CLEAR to enter again.
Playing in random order
During playback or in stop mode, press RANDOM for playback in random order. Press RANDOM again to return to normal playback.
Mark a scene on a disc
You can mark a position on a disc to return to at the place. Simply press MARKER at the desired position. The marker icon will appear on-screen briefly. Repeat to place up to nine markers. Also you can recall or clear the positions. Press SEARCH and [Marker Search] menu. Use b or B to select a desired marker on the menu, then press ENTER to recall it or CLEAR to clear it.
Last Scene Memory
This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is auto­matically recalled.
Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the unit automatically turns itself off.
ACDDVD
DivXDVD
MP3WMAACD
DivXDVD
DVD
DVD
DivXDVD
DivXDVD
DivXDVD
DVD
DivXDVD
ACDDivXDVD
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 12
Page 13
13
Playing a DivX movie files -
more you can do
Changing the character set to display DivX®subtitle correctly
Press and hold SUBTITLE for 3 seconds during playback. The language code will appear. Press bB to select another language code until the subtitle is dis- played properly and then press ENTER.
DivX file requirement
DivX file compatibility with this player is limited as follows:
• Available resolution size: 720x576 (W x H) pixel.
• The file names of DivX and subtitle are limited to 50 characters.
• DivX
file extensions: “.avi”, “.mpg”, “.mpeg”
• Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 1.0 (.sub) SubViewer 2.0 (.sub/.txt), TMPlayer (.txt)
• Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP43”, “3IVX”, “DIVX6.xx” (Standard playback only)
• The playback function is only supported with DivX 6.0 in this unit.
• Playable Audio format: “Dolby Digital”, “PCM”, “MP3”, “WMA”
• Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz (WMA)
• Bit rate: within 8 - 320 kbps (MP3), within 48 - 384 kbps (WMA)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 650 (total number of files and folders)
• Not all WMA Audio formats are compatible with this unit.
Listening to Music Disc or files - more you can do
Creating your own program
You can play the contents of a disc in the order you want by arranging the playback order of the music on the disc. To add music on the program list, press PROG. in stop mode to enter the program edit mode ( mark appears on the menu). Select desired music on the [List] then press ENTER to add the music to the program list. Select music from the program list then press ENTER to start pro­grammed playback. To clear music from the program list, select the music you want to clear then press CLEAR in program edit mode. To clear all music from the program list, select [Clear All] then press ENTER in program edit mode. The program is cleared when the disc is removed or the unit is turned off.
Displaying file information (ID3 TAG)
While playing an MP3 file containing file information, you can display the infor­mation by pressing DISPLAY repeatedly.
MP3/WMA music file requirements
MP3/WMA compatibility with this unit is limited as follows:
• File extensions: “.mp3”, “.wma”
• Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3), within 48 - 384kbps (WMA)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 650 (total number of files and folders)
Playing a DivX movie file
1 Select an operation mode (page 8): MODE 2 Select a movie file from the menu: v V, MENU 3 Start playback: N PLAY 4 To stop playback: x STOP
BUTTON
Listening to Music Disc or files
BUTTON
1 Select an operation mode (page 8): MODE 2 Select music from the menu: v V, MENU 3 Start playback: N PLAY 4 To stop playback: x STOP
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 13
E
Page 14
14
Viewing photo files - more you can do
Viewing photo files as a slide show
Use vV b B to highlight ( ) icon then press ENTER to start slide show. You can change slide show speed using bBwhen ( ) icon is highlighted.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
Rotate a photo
Use vV to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen.
Pause a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue the slide show.
Listening to MP3 music during slide show
You can listen to MP3 music during slide show, if the disc contains music and photo files together. Use vV b B to highlight ( ) icon then press ENTER to
start slide show.
Watching an enlarged photo image
While viewing a photo in full screen, press ZOOM repeatedly to select zoom mode. You can move through the zoomed photo using vVb B buttons. Press
CLEAR to exit.
Photo file requirement
JPEG file compatibility with this unit is limited as follows:
• File extensions: “.jpg”
• Photo size: Less than 4800 x 4800 pixels
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 650 (total number of files and folders)
• Progressive and lossless compression JPEG image files are not supported.
Viewing photo files
1 Select an operation mode (page 8): MODE 2 Select a photo file on the menu: v V, MENU 3 Display the selected file in full screen: N PLAY 4 To return to the menu: x STOP
BUTTON
Watching an AV input
1 Connect the external device to this unit -
using the supplied AV cable. (page 8)
2 Display the menu to select MODE
the operation mode:
3 Select [AV IN]:
bb BB
, ENTER
4 Watch a video from the external device. -
5 To exit [AV IN] mode, select [INTERNAL], MODE,
bb BB
, ENTER
[DISC] or [EXTERNAL].
You can watch video/audio signals from an external device using this unit.
BUTTON
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 14
Page 15
15
Using a USB Flash Drive
1 Connect a USB Flash Drive (page 6): -
2 Display the menu to select MODE
the operation mode:
3 Select [EXTERNAL]:
bb BB
, ENTER
4 Select [USB]:
vv VV
, ENTER
5 Select a file:
vv VV
, MENU
6 Play the file:
NN
PLAY
Music files (MP3/WMA), photo files (JPEG) and DivX files can be played. For details of operation on each file type, refer to relevant pages.
BUTTON
Using an Internal Memory
1 Display the menu to select MODE
the operation mode:
2 Select [INTERNAL]:
bb BB
, ENTER
3 Select a file:
vv VV
, MENU
4 Play the file:
NN
PLAY
Music files (MP3/WMA), photo files (JPEG) and DivX files can be played. For details of operation on each file type, refer to relevant pages.
BUTTON
Using an External Memory Card
1 Insert a external memory card -
in the unit (page 6):
2 Display the menu to select MODE
the operation mode:
3 Select [EXTERNAL]:
bb BB
, ENTER
4 Select [Memory Card]:
vv VV
, ENTER
5 Select a file:
vv VV
, MENU
6 Play the file:
NN
PLAY
Music files (MP3/WMA), photo files (JPEG) and DivX files can be played. For details of operation on each file type, refer to relevant pages.
BUTTON
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 15
Page 16
16
Editing a File menu - more you can do
Copying a file or folder to the internal memory
You can copy a file or folder to the internal memory.
Select a file or folder you would like to copy then press DISPLAY to show File Manager options. Select [COPY] option then press ENTER. Select a directory that you would like to copy to. Press ENTER to begin copying.
• If you try to copy a folder to the internal memory, the sub folder and files in the sub folder are not copied.
Deleting a file or folder from the internal memory
You can delete a file or folder from the internal memory.
Select a file or folder you would like to delete then press DISPLAY to show File Manager options. Select [DELETE] option then press ENTER. Select [Yes] then press ENTER.
Renaming a file or folder on the internal memory
You can rename a file or folder on the internal memory. The length of the name can be up to 17 characters long.
Select a file or folder you would like to rename then press DISPLAY to show File Manager options. Select [RENAME] option then press ENTER. Rename the selected file or folder using the remote control buttons enter a name. Press ENTER to save the name.
v / V: Changes the character set by pressing the v / V button
repeatedly. (Number, Alphabet Capital or Alphabet Small).
• Numbers (0-9): Enters the corresponding character by pressing a button repeatedly at the cursor position.
CLEAR: Deletes the character at the cursor position.
b / B: Moves cursor to left or right.
Create a new folder on the internal memory
You can create a new folder on the internal memory. Press DISPLAY to show File Manager options. Select [MAKE] option then press ENTER and the new folder will be created. Rename the folder as shown in [Renaming a file or folder on the internal memory] above. Press ENTER to save the name.
• You can create a folder only in the ROOT directory.
Editing a file
1 Select a file or folder in the internal
vv VV
, MENU
memory:
2 Display the File Manager menu: DISPLAY
3 Select an option:
bb BB
4 Execute the selected option: ENTER
You can edit a JPEG, MP3/WMA or DivX file/folder in the internal memory. You cannot copy a file/folder on the disc.
BUTTON
Copying a file
1 Select a file or folder:
vv VV
, MENU
2 Display the File Manager menu: DISPLAY
3 Select [COPY] option if you need:
bb BB
4 Start the copying: ENTER
You can copy a JPEG, MP3/WMA or DivX file/folder from the current media to the internal memory. You cannot copy a file/folder on the disc.
BUTTON
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 16
Page 17
17
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Area Codes
Choose a area code from this list.
Language Code
Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali, Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 6669 Chinese 9072
Language Code
Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 English 6978 Esperanto 6979 Estonian 6984 Faroese 7079 Fiji 7074 Finnish 7073 French 7082 Frisian 7089 Galician 7176 Georgian 7565 German 6869 Greek 6976 Greenlandic 7576 Guarani 7178 Gujarati 7185
Language Code
Hausa 7265 Hebrew 7387 Hindi 7273 Hungarian 7285 Icelandic 7383 Indonesian 7378 Interlingua 7365 Irish 7165 Italian 7384 Javanese 7487 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kirghiz 7589 Korean 7579 Kurdish 7585 Laothian 7679 Latin 7665 Latvian, Lettish 7686
Language Code
Lingala 7678 Lithuanian 7684 Macedonian 7775 Malagasy 7771 Malay 7783 Malayalam 7776 Maori 7773 Marathi 7782 Moldavian 7779 Mongolian 7778 Nauru 7865 Nepali 7869 Norwegian 7879 Oriya 7982 Panjabi 8065 Pashto, Pushto 8083 Persian 7065 Polish 8076 Portuguese 8084
Language Code
Quechua 8185 Rhaeto-Romance 8277 Rumanian 8279 Russian 8285 Samoan 8377 Sanskrit 8365 Scots Gaelic 7168 Serbian 8382 Serbo-Croatian 8372 Shona 8378 Sindhi 8368 Singhalese 8373 Slovak 8375 Slovenian 8376 Spanish 6983 Sudanese 8385 Swahili 8387 Swedish 8386 Tagalog 8476
Language Code
Tajik 8471 Tamil 8465 Telugu 8469 Thai 8472 Tonga 8479 Turkish 8482 Turkmen 8475 Twi 8487 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapük 8679 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 7473 Yoruba 8979 Zulu 9085
Area Code
Afghanistan AF Argentina AR Australia AU Austria AT Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG
Area Code
Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR
Area Code
Greenland GL Hong Kong HK Hungary HU India IN Indonesia ID Israel IL Italy IT Jamaica JM Japan JP Kenya KE Kuwait KW Libya LY Luxembourg LU Malaysia MY
Area Code
Maldives MV Mexico MX Monaco MC Mongolia MN Morocco MA Nepal NP Netherlands NL Netherlands Antilles AN New Zealand NZ Nigeria NG Norway NO Oman OM Pakistan PK Panama PA
Area Code
Paraguay PY Philippines PH Poland PL Portugal PT Romania RO Russian Federation RU Saudi Arabia SA Senegal SN Singapore SG Slovak Republic SK Slovenia SI South Africa ZA South Korea KR Spain ES
Area Code
Sri Lanka LK Sweden SE Switzerland CH Taiwan TW Thailand TH Turkey TR Uganda UG Ukraine UA United States US Uruguay UY Uzbekistan UZ Vietnam VN Zimbabwe ZW
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 17
Page 18
18
Specifications
Troubleshooting
Symptom
Correction
The power cord is disconnected.
The battery is discharged.
No disc is inserted.
The operation mode is not select­ed correctly.
The TV is not set to receive the signal from the unit.
The video cable is not connected securely.
The LCD mode is set to [Off].
The equipment connected with the audio cable is not set to receive the signal from the unit.
The volume is set to minimum.
The AUDIO options are set to the wrong position.
An unplayable disc is inserted.
The rating level is set.
The remote control is not pointed at the remote sensor on the unit.
The remote control is too far from the unit.
Plug the power cord into the wall outlet securely.
Recharge the battery.
Insert a disc.
Use MODE button to select the operation mode. (page 8)
Select the appropriate video input mode on the TV.
Connect the video cable securely.
Select an LCD mode other than [Off].
Select the correct input mode of the audio amplifier.
Use the volume controller to adjust the volume.
Set the AUDIO settings to the cor­rect position.
Insert a playable disc. (Check the disc type and regional code.)
Change the rating level.
Point the remote control at the remote sensor of the unit.
Operate the remote control closer to the unit.
No power.
The power is on, but the unit does not work.
No picture.
No sound.
The unit does not start playback.
The remote control does not work properly.
Designs and specifications are subject to change without prior notice.
Cause
General
Power requirements DC 12 V Power consumption 12W External Dimensions 231 x 40.2 x 145 mm (W x H x D) Net Weight (Approx.) 1.06 kg Operating temperature: 5 °C to 40 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL
Internal Memory Flash Memory (256MB)
Connectors
Audio/Video Output/Input ø3.5mm mini jack x 1
- Video: 1.0 V (p-p), 75 Ω, sync negative
- Audio (Analog): 2 Vrms (1 KHz, 0 dB)
Earphone terminal ø3.5mm stereo mini jack x 2
Liquid Crystal Display
Panel size 8 inches wide (diagonal) Projection system R.G.B. stripe Driving system TFT active matrix Resolution 800 x 480 (WVGA)
Accessories
• RCA Video/Audio cable
• AC Adapter (MPA-630)
• Automotive Adapter (DPDC1)
• Remote Control
• Battery for Remote Control (Lithium Battery)
DP392G-P_AIRNDLK-ENG 6/20/08 4:06 PM Page 18
Page 19
P/NO : MFL56732864
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
.ﺩﺯﺎﺴﻴﻣ ﻢﻫﺍﺮﻓ ﺍﺭ ﺖﻴﻠﺑﺎﻗ ﻦﻳﺍ ﻱﺍﺭﺍﺩ ﻱﺎﻬﻜﻴﺳﺩ ﻱﻭﺭ ﻩﮋﻳﻭ ﻱﻮﺠﺘﺴﺟ ﻥﺎﻜﻣﺍ ﻱﺩ ﻲﺳ ﺶﺨﭘ ﻝﺮﺘﻨﻛ
.ﺪﻴﻳﺎﻤﻧ ﻝﺎﻌﻓ ﺍﺭ [ON] ﺪﻴﻠﻛ ﻥﺎﻜﻣﺍ ﻦﻳﺍ ﺯﺍ ﻩﺩﺎﻔﺘﺳﺍ ﺖﻬﺟ
(ﻱﺩﻲﺳ ﺶﺨﭘ ﻝﺮﺘﻨﻛ)
Page 29
ﺪﻨﺷﺎﺒﻴﻣ ﻮﻨﻣ ﻩﺮﺠﻨﭘ ﻱﺍﺭﺍﺩ ﻪﻛ ﻲﻳﺎﻫ ﻱﺩ ﻱﻭ ﻱﺩ ﻱﺍﺮﺟﺍ
.ﺩﻮﺸﻴﻣ ﺍﺮﺟﺍ ﻢﻠﻴﻓ ﻉﻭﺮﺷ ﺯﺍ ﻞﺒﻗ ﻪﻛ ﺪﻧﺭﺍﺩ ﻮﻨﻣ ﻩﺮﺠﻨﭘ ﺎﻫ ﻱﺩ ﻱﻭ ﻱﺩ ﺐﻠﻏﺍ
.ﺪﻴﻳﺎﻤﻧ ﺩﺭﺍﻭﺍﺭ ﺮﻈﻧ ﺩﺭﻮﻣﻞﻳﺎﻓﻩﺭﺎﻤﺷﺎﻳ ﻭﻩﺩﻮﻤﻧ ﺏﺎﺨﺘﻧﺍﺍﺭﺎﻬﻧﺁﺖﻬﺟ ﻱﺎﻫ ﻪﻤﻛﺩﺎﺑ ﺪﻴﻧﺍﻮﺘﻴﻣ
.ﺪﻴﻫﺩ ﺭﺎﺸﻓ ﺍﺭ ENTER ﻪﻤﻛﺩ ﺏﺎﺨﺘﻧﺍ ﺖﻬﺟ
Page 30
Page 31
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 1.0 (.sub)
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt)
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Loading...