
MEASURE FIRST
LAUNDRY INSTALLATION GUIDE
You found the LG washer and dryer that fit your lifestyle—now make sure they fit your
space. These LG models are larger than typical front load washers and dryers, so use
this guide to ensure your purchase can be successfully delivered and installed.
WALK THE PATH
START at the point where the washer and dryer will be unloaded
from the delivery truck and walk the path that the appliances will
take from there to the laundry room.
Any gates or arbors on
1
the path to the door must
be at least 30" wide.
Carefully measure the width, height and depth
5
of the opening where the washer and dryer
will be installed. Be sure to include door, floor
and wall moldings in your measurements.
For height, measure to the bottom of overhead cabinets, if you have them.
For depth, be sure there’s enough room to fully open washer and dryer doors.
All doors must be at least 30" wide at their narrowest
2
point. Be sure to account for knobs, latches, closers
and screen doors.
All hallways must be at least 30" wide
3
at their narrowest point, including
shelves or other wall-mounted items.
For corners or stairway landings,
4
you’ll need 43.4" to clear a 90° turn.
57"
29"
FIT THE SPACE
Your new LG washer and dryer pair requires a MINIMUM AREA
of 60" W x 40.8" H x 37.3" D to allow for proper spacing
and venting.
Washer 29" 40.8" 32.3" 57" 54.7"
Dryer 29" 40.8" 32.3" 57" 54.7"
(If you add pedestals, the minimum height is 54.7")
WIDTH HEIGHT DEPTH
DEPTH
(door open)
HEIGHT
(with pedestal)
32.3"
40.8"
13.9"
Allow 5"
for hoses
& venting

CLEAR THE WAY
Prepare for a smooth delivery
by dealing with potential
obstacles now. Here are
some helpful hints to try:
• Ifadoorwayistoonarrowor
the door cannot be opened fully,
remove the door. If the hinges are
fixed pin hinges, they will need to
be unscrewed to remove the door.
• Fornarrowstairswithhandrails,
removing the railing may help you
meet the minimum 30" clearance.
• Ifthelaundryroomisn’tdeep
enough for the appliances plus
the dryer duct, you may be able
to use special venting components,
such as a side vent kit, to reduce
venting requirements. See
associate for details.
Remember, if ANY part of the delivery path or final installation location is too small to fit this LG washer and dryer,
and the obstructions can’t be moved, you’ll need to notify your retailer BEFORE your scheduled delivery date!
GET IT INSTALLED
To ensure your installation goes smoothly, here are some final items you’ll need to have in place:
FOR WASHER: FOR GAS DRYER:
110V grounded 3-prong
electrical outlet within 6 feet
Water supply (hot and cold)
Drain must be no higher than
96 inches and within 5 feet of
the washer
A clean, solid and level floor
surface
FOR ELECTRIC DRYER:
New electrical cord
(3- or 4-prong depending
on your outlet, sold separately)
240V electrical outlet
UL approved rigid or
semi-rigid dryer venting
(never use foil or plastic)
New gas flex connection kit
(sold separately) and natural
gas line connection
LP conversion kit (if not using
natural gas, sold separately)
110V grounded 3-prong
electrical outlet within 4 feet
UL approved rigid or
semi-rigid dryer venting
(never use foil or plastic)
If your purchase includes installation, your LG washer and dryer will be unboxed, put in place, connected to the appropriate
sources and leveled. Then they’ll be tested to make sure that everything works correctly. All packing material will be removed
and your home restored to its original condition.
Note: Accessories, stacking kits and pedestals are sold separately.