LG D2792P-SN Owner’s Manual
<![endif]>ENGLISH
OWNER’S MANUAL
CINEMA 3D MONITOR
Please read this manual carefully before operating your set and retain it for future reference.
CINEMA 3D MONITOR MODEL
D2792P
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
CONTENTS
3ASSEMBLING AND PREPARING
3Unpacking
4Parts and buttons
5Setting up the Monitor set
5- Attaching the Stand Base 6 - Detaching the Stand Base 7 - Mounting on a table
7 - Using the cable holder
9USING THE MONITOR SET
9Connecting to a PC
9- D-SUB connection
9- DVI-D connection
9- HDMI connection
11 CUSTOMIZING SETTINGS
12Customizing Settings
12- Menu Settings
13-PICTURE
14-COLOR
15-DISPLAY
15-VOLUME
16-OTHERS
17-FUNC.Settings
17-3D SETTINGS
18-Setting Dual Play
19-PICTURE MODE
20-SUPER+RESOLUTION
21-SUPER ENERGY SAVING
24 TROUBLESHOOTING WHEN USING 3D MODE
25D2792P
26Preset Modes (Resolution)
27Indicator
28SAFETY PRECAUTIONS
28- Precautions to take when viewing 3D images
28- When using 3D Glasses
29PROPER POSTURE
29 Proper posture for using the Monitor set.
29Precautions to take when viewing 3D images
22 TROUBLESHOOTING
ASSEMBLING AND PREPARING 3
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
<![endif]>ENGLISH
CD(Owner's Manual) / |
D-SUB Cable |
|
Card |
||
|
Power Cord |
AC-DC Adapter |
( Depending on the country )
DVI-D Cable
(This cable is not included in all countries.)
or
AC-DC Adapter
( Depending on the country )
Two Screws |
Stand Base |
|
|
or |
3D Glasses |
3D Glasses |
3D Glasses |
3D Glasses |
|
(Normal type) |
(Normal type) |
(Normal type) |
(Clip-on type) |
The number and type of 3D glasses may differ depending on the model of country.
CAUTION
yyDo not use any unapproved accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
4 ASSEMBLING AND PREPARING
Parts and buttons
<![if ! IE]><![endif]>ENGLISH
Power Indicator yyLightingOn:Turnedon yyLightingOff: Turned off
(Power Button)
Button (See p.11) |
Connection panel (See p.9)
ASSEMBLING AND PREPARING 5
Setting up the Monitor set
Attaching the Stand Base
1Place the Monitor set with the screen side down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Use three screws to fix the Stand Body and monitor set.
WARNING
If you don`t fasten the screw tightly, monitor will fall down and get damaged.
CAUTION
Tighten the screws firmly to prevent the monitor from tilting forward. Do not over tighten.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 ASSEMBLING AND PREPARING
Detaching the Stand Base
1Place the Monitor set with the screen side down on a flat and cushioned surface.
2Remove three screws and pull out the Stand Body from the monitor set.
CAUTION
yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.
yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.
|
ASSEMBLING AND PREPARING 7 |
|
|
|
|
Mounting on a table |
3 Press (Power) button on the bottom switch |
|
|
panel to turn the power on. |
|
1 Lift and tilt the Monitor set into its upright |
|
|
position on a table. |
|
|
Leave a 10 cm (minimum) space from the wall |
|
|
for proper ventilation. |
CAUTION |
|
|
||
10 cm
10 cm
10 cm
10 cm
Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
Using the cable holder
<![endif]>ENGLISH
2Connect the AC-DC Adapter and Power Cord to a wall outlet.
<![endif]>ENGLISH
8 ASSEMBLING AND PREPARING
WARNING |
Using the Kensington security system |
When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.
Do
Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.
NOTE
+20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.
The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the Monitor set and a table.
NOTE
The Kensington security system is optional. You can obtain it from most electronics stores.
Front Rear
USING THE MONITOR SET 9
USING THE MONITOR SET
Connecting to a PC
yyYour Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.
D-SUB connection
Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.
DVI-D connection
Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.
HDMI connection
Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations.
NOTE
yyWhen using a D-Sub signal input cable connector for Macintosh
<![endif]>ENGLISH
yyMac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.
NOTE
yyIf you use HDMI PC, it can cause compatibility problem.
Loading...