LG D1454BF Owner's Manual

OWNER’S MANUAL

WASHING MACHINE

WM0642H*

P/NO : MFL31245123

www.lg.com

Please read this manual carefully before operating
your set and retain it for future reference.

OWNER'S MANUAL

DISHWASHER

Please read this manual carefully before operating
your dishwasher. Retain it for future reference.

D1455W(L,M,T,B,C,D,A)F(B,U)
D1454W(L,M,T,B,C,D,A)F(B,U)
D1465W(L,M,T,B,C,D,A)F(B,U)
D1464W(L,M,T,B,C,D,A)F(B,U)
DW-TS610S / DW-TS610T / DW-TS610W
DW-TS605T / DW-TS605W

P/No. : MFL66281401

ONTENTS

C

SAFETY AND CAUTION 3

INSTALLATION INSTRUCTIONS 5

PARTS NAME 9

FUNCTION OF CONTROL BUTTON 10

BEFORE USING FOR THE FIRST TIME 15

INFORMATION FOR ENERGY TEST

HOW TO USE AND OPERATE

OPERATING SEQUENCE

PROGRAMME

USER MAINTENANCE INSTRUCTIONS

TROUBLE SHOOTING GUIDE

SPECIFICATION

2

17

18

26

27

28

29

33

AFETY AND CAUTION

S

IMPORTANT SAFETY INSTRUCTIONS

WARNING - When using your dishwasher, follow basic precautions, including the following:

• Please read this manual carefully before using
the dishwasher for the first time.

• This manual contains very important notes

regarding the installation, use and maintenance
of your dishwasher.

• The manufacturer can not be responsible for
problems caused by ignoring these safety and
caution instructions.

• This dishwasher is designed for normal
household use.

• Do not use the dishwasher for industrial and
commercial use, or other purpose.

• The appliance is not intended for use by young
children or infirm persons without supervision.

• Check packaging and dishwasher immediately
for signs of transport damage. If the appliance is
damaged, do not put it into use but contact your
supplier without delay.

• This appliance is intended to be used in
household and similar applications such as;

- Staff kitchen areas in shops, offices and other

working environments;

- Farm houses;

- By clients in hotels, motels and other

residential type environments;

- Bed and breakfast type environments.

• If this product is used for commercial purpose, it
is not warranted.
(Example: Public places such as restaurant,
lodging house, training center, dormitory)
If the product is installed outside the normal
service area, any cost of transportation involved
in the repair of the product, or the replacement
of a defective part, shall be borne by the owner.

■

During installation

• Electrical connection must be in accordance
with the rating label.

• Electrical safety is only guaranteed when the
earth system of your house is in accordance with
the related local regulations.(Do not use an
extension cable or cord.)

• If the hot water exceeds 65ºC, adjust the water
heater setting. If the hot water temperature can
not be maintained below 65ºC, the dishwasher
must be connected to cold water.

• If power supply cord is damaged, it must only be
replaced by the manufacturer or its service agent

or a similar qualified person in order to avoid a
hazard.

• This appliance must be positioned so that the
plug is accessible.

• The appliance is to be connected to the water
mains using new hose-sets and that old hose-sets
should not be reused.

■

During use

• Only suitable household utensils should be
placed in the dishwasher.
(Please avoid utensils; that are non-heat­resistant, metal decorated, etc.)

Do not use any kinds of solvent in your

•
dishwasher. They may cause an explosion or fire.

• Do not spray water on the appliance.
It may cause the failure of electric parts or
electric shock.

• Do not push down or sit on the inner door when
the door is opened. It may cause the deformation
or failure of your dishwasher.

• Do not use the detergent for hand washing.
The detergent for dishwasher should be used for
normal operation.

• This appliance is fitted with a safety function
that automatically stops the operation of the
dishwasher when it is exposed to heavy
disturbance on its mains.

• Dishwasher detergents are strongly alkaline.
They can be extremely dangerous if swallowed.
Avoid contact with skin and eyes and keep
children away from the dishwasher when the
door is open.
Check that the detergent receptacle is empty
after completion of the wash cycle.

■

Child Safety

• Controls may be locked using Child Lock mode
to prevent all the settings from being changed by
a child.

• Keep children away from detergents and rinse-aids.

• Do not allow children to operate the dishwasher.

• Young children should be supervised to ensure
that they do not play with the appliance.

■ 

All batteries (whether installed or attached)
should not be exposed to excess heat like

sunlight or similar source.

3

AFETY AND CAUTION

S

CAUTION

Concerning the Power Cord

It is recommended that most appliances placed upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part by an authorised servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point
where the cord exits the appliance.

CAUTION

The instructions shall state the substance of the following :

This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current. This
appliance is equipped with a cord that has an equipment grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is installed and grounded in
accordance with all local codes and ordinances.

WARNING - Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service representative if you are in doubt
whether the appliance is properly grounded. Do not modify the plug provided with the appliance;
if it will not fit the outlet have a proper outlet installed by a qualified electrician.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product
it means the product is covered by the European Directive
2002/96/EC.

2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.

3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human
health.

4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.

4

NSTALLATION INSTRUCTIONS

I

WARNING

A qualified electrician/plumber or competent person should carry out any electrical/plumbing
work required to install this appliance.

Step 1 :

PREPARE CUPBOARD OPENING

1

This dishwasher is designed to fit the size

shown as below.

2

Select a location as close to sink as

possible for ease of connection to the
water and drain pipes.

3

To ensure good drainage, the dishwasher

should not be installed more than 3 meters
away from the sink.

4

If dishwasher is installed in a corner, a

minimum of 5cm of space is required
between the washer and an adjacent
cabinet or wall.

Step 2 :

PREPARATION FOR ELECTRICAL WIRING

CAUTION

For personal safety, remove house
fuse or open circuit breaker before
installation. Do not use an
extension cord or adapter plug with
this appliance. Electrical and
earthing connections must comply
with the national electrical code/
provincial and municipal code and/
or other local codes.

1

This appliance must be supplied with

correct rating voltage and hertz as shown
on instruction manual, and connected to
an individual, properly earthed branch
circuit, protected by a minimum 15 amp
circuit breaker or time delay fuse.
Wiring must be 2 wires with Earth.

2

The power plug must be in a accessible

location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side.(See page 7 Fig.A)

3

The power plug must be correctly

earthed, if in doubt, have it checked by a
qualified Electrician. No other appliance
should be connected to the same plug
outlet by a double adapter or similar
plug.

Unit:mm

Any bare wood surrounding the
dishwasher should be sealed with a
waterproof paint or sealant to prevent
swelling.

Dangerous voltage

To indicate hazards arising
from dangerous voltages.

Note- in case of an
application warning sign, the
rules according to ISO 3864
should be adhered to.

5

NSTALLATION INSTRUCTIONS

I

Step 3 :

PREPARING THE DISHWASHER
FOR INSTALLATION

1

Lay the dishwasher on its back.

2

Adjust the legs to the required height

as shown in below figure.

Adjust
leg

3

To reduce noise attach the strip to the

machine base.

Step 4 :

INSTALLING THE
DISHWASHER IN CUPBOARD

1

Before sliding the dishwasher into the

cupboard opening, all necessary height
and balancing adjustments should be
made using a spanner.

2

Slide the dishwasher into the cabinet,

opening carefully. Make sure that the
drain hose inside the cabinet is not
kinked or stretched.

CAUTION

If the height of the cupboard is below
850mm, you should remove the top
table by unscrewing the 2 screws.
(Two from rear)

Remove the adhesive
cover and attach the strip
to the machine base,
hiding the legs.
Trim the edges if desired.

The bottom of the strip
should touch the floor.

6

NSTALLATION INSTRUCTIONS

I

Step 5 :

INSTALLATION OF DRAIN HOSE

1

If the end of drain hose does not fit to

the drain line, use a rubber
connector(not supplied) that is
resistant to heat and detergent.

2

This should be available from a

plumbing shop or DIY merchants.

3

There are two typical connections as

shown in Figure A, B.

The S trap spigot must be drilled out cleanly
and free of obstruction to its maximum
internal diameter, if used for drainage.

To prevent siphoning, one of the following
methods must be used:

■ When the drain hose is connected to a
sink S trap or waste disposal unit, the hose
must be looped up to the underside of the
bench top and secured.

■ When the drain hose is connected to a
separate standpipe, it is essential that an
airtight connection be made.
Refer to Fig.B

Fig. B : Drainage connection - stand pipe.

Drain hose Extension

Extend drain hose as shown below.

Fig. A

CAUTION

When you connect or extend drain
hose, make sure that drain hose is not
kinked.
(Bends should have a 40 mm radius.)

7

NSTALLATION INSTRUCTIONS

I

Step 6 :

INSTALLATION OF WATER INLET HOSE

■ Connect the water supply hose to the water tap.
(Fig. A)

■ Some models consist of an inlet valve and hose.
(Fig. B)
After connecting the inlet hose to the tap, turn on
the tap to flush out foreign substances (dirt, sand
or sawdust) in the water lines. Let water drain
into a bucket, and check the water temperature.
Connect the supply hose to the water inlet valve.

Fig. A

• This dishwasher may be fed with either hot or

cold water. If the water can not be maintained
below 65ºC, the dishwasher must be
connected to cold water.

• When connecting, you may use sealant tape or

sealing compound to avoid water leaks.

• Make sure that the line is not kinked or

sharply bent.

• It is recommended that the new inlet hose be

used and not the existing or old hose.

Fig. B

Step 8 :

HOW TO LEVEL THE DISHWASHER

After installing the dishwasher, you may
notice a slight sticking of the door to the
dishwasher, when you open or close the door.
If this does happen you need to adjust the level
of the dishwasher.

Case 1. In case the door is slanted to the right

Fig. C

• If the door slants to the right, see fig. C and
follow these instructions:

1) Unscrew(counter-clockwise) the left leg of

the back side and correct the level.

2) Check the opening of door and repeat if

necessary until the door opens and closes
properly.

• When the product is correctly leveled, there
should be no slant , stickiness or friction sound.

Case 2. In case the door is slanted to the left

Step 7 :

FINAL CHECK AND ASSEMBLING

1

Securely hand tighten supply hose to the

1

water supply.
Plug the power supply cord into an earthed
electrical point and switch on.

2

After installing and prior to using the

2

dishwasher with crockery, we recommend
that you use the dishwasher on ‘Quick’
mode to rinse through. At this stage it is
useful to ensure that there are no operating
problems or water leaks.

When the dishwasher is used for the first
time, there may be a loud noise, if this
happens, turn off the power and restart the
dishwasher.

Fig. D

• If the door slants to the left, see fig. D and
follow these instructions:

1) Check the opening of door if there still
remains sticky or friction sound.

2) Check the opening of door and repeat if
necessary until the door opens and closes
properly.

• When the product is correctly leveled, there
should be no slant, stickiness or friction sound.

8

ARTS NAME

P

1. Control Panel

2. Door Handle

3. Front Cover

4. Lower Cover

5. Display Window

6. Power Button

7. Drain Hose

8. Inlet Hose

9. Power Cord

10. Adjustable Leg

Funnel Noise Strip

※ The appearance and specifications may vary without notice.

11. Upper Rack

12. Cutlery Basket

13. Detergent And Rinse Aid Dispenser

14. Vapor Vent Cover

15. Upper Spray Arm

16. Lower Spray Arm

17. Filter ASM

18. Lower Rack

19. Salt Container Cap

20. Cutlery Rack

21. Steam Nozzle

9

UNCTION OF CONTROL BUTTON

F

MODEL : D1455W(L,M,T,B,C,D,A)F(B,U)

MODEL : D1454W(L,M,T,B,C,D,A)F(B,U)

10

11

™

SMART DIAGNOSIS

function is

available only for the products with

™

a

SMART DIAGNOSIS

mark.

(Refer to Page 32.)