LG AVNW36GM1S0 Owner's Manual

OWNER’S MANUAL

AIR CONDITIONER

ENGLISH

ESPAÑOL

Please read this manual carefully before operating your set and retain it for future reference.

Ceiling suspended air conditioner

MFL68525402

P/NO : MFL68525402

www.lg.com

TIPS FOR SAVING ENERGY

ENGLISH

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.

ENGLISH

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• The product shall be installed according to the Wiring regulations of the corresponding country.

• The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

Installation

• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit. There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. Do not disassemble or repair the product. There is risk of fire or electric shock.

• Always ground the product. There is risk of fire or electric shock.

• Install the panel and the cover of control box securely. There is risk of fire or electric shock.

• Always install a dedicated circuit and breaker. Improper wiring or installation may cause fire or electric shock

• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.

• Do not modify or extend the power cable. There is risk of fire or electric shock.

• Do not install, remove, or re-install the unit by yourself (customer). There is risk of fire, electric shock, explosion, or injury.

• Be cautious when unpacking and installing the product. Sharp edges could cause injury. Be especially careful of the case edges and the fins on the condenser and evaporator.

• For installation, always contact the dealer or an Authorized Service Center. There is risk of fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand. It may cause injury, accident, or damage to the product.

• Be sure the installation area does not deteriorate with age. If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.

• Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open. Moisture may condense and wet or damage furniture.

IMPORTANT SAFETY INSTRUCTIONS

Operation

• Take care to ensure that power cable could not be pulled out or damaged during operation. There is risk of fire or electric shock.

• Do not place anything on the power cable. There is risk of fire or electric shock.

• Do not plug or unplug the power supply plug during operation. There is risk of fire or electric shock.

• Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock.

• Do not place a heater or other appliances near the power cable. There is risk of fire and electric shock.

• Do not allow water to run into electric parts. It may cause There is risk of fire, failure of the product, or electric shock.

• Do not store or use flammable gas or combustibles near the product. There is risk of fire or failure of product.

• Do not use the product in a tightly closed space for a long time. Oxygen deficiency could occur.

• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on. Do not use the telephone or turn switches on or off. There is risk of explosion or fire

• If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect the power supply cable. There is risk of electric shock or fire.

• Stop operation and close the window in storm or hurricane. If possible, remove the product from the window before the hurricane arrives. There is risk of property damage, failure of product, or electric shock.

• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter, if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center. There is risk of fire or electric shock.

• Be cautious that water could not enter the product. There is risk of fire, electric shock, or product damage.

• Ventilate the product from time to time when operating it together with a stove, etc. There is risk of fire or electric shock.

• Turn the main power off when cleaning or maintaining the product. There is risk of electric shock.

• When the product is not be used for a long time, disconnect the power supply plug or turn off the breaker. There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody could step on or fall onto the outdoor unit. This could result in personal injury and product damage.

ENGLISH

CAUTION

Installation

• This appliance is intended to be used by expert or trained users in shops, in light industry and on

farms, or for commercial use by lay persons.

• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant lev-

els may cause failure of product.

• Install the drain hose to ensure that water is drained away properly. A bad connection may cause

water leakage.

• Keep level even when installing the product. To avoid vibration or water leakage.

• Do not install the product where the noise or hot air from the outdoor unit could damage the neigh-

borhoods. It may cause a problem for your neighbors.

Batteries :

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Use two or more people to lift and transport the product. Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause cor-

rosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.

Operation

• This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children being supervised not to play with appliance.

• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.) This could

harm to your health.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow. It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc. There is risk of fire, electric

shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter. They are very sharp! There

is risk of personal injury.

• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and fail-

ure of product.

• Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty

filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.

• Do not insert hands or other objects through the air inlet or outlet while the product is operated.

There are sharp and moving parts that could cause personal injury.

• Do not drink the water drained from the product. It is not sanitary and could cause serious health is-

sues.

• Use a firm stool or ladder when cleaning or maintaining the product. Be careful and avoid personal

injury.

• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and

new batteries or different types of batteries. There is risk of fire or explosion

• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or

explode.

• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not

use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

Do not burn, do not try to open it, do not dispose in ordinary trash. Preserve environment and your health. After use, batteries must be delivered to the merchant or service authorized network (Conama number 401 dated 11/2008).

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

ENGLISH

2 TIPS FOR SAVING EN-

ERGY

3 IMPORTANT SAFETY IN-

STRUCTIONS

7 BEFORE USE

7 Preparing for operation

7 Usage

7 Cleaning and maintenance

7 Service

8 PRODUCT INTRODUC-

TION

8 Name and function of parts

8 Operation indication lamps

9 Wireless remote controller

11 OPERATING INSTRUC-

TION

11 How to insert the batteries

11 Wireless remote controller mainte-

nance

12 OWNER'S INSTRUC-

TION

12 Cooling mode -standard operation

12 Cooling mode - power cooling

13 Heating mode

14 Auto changeover mode

15 Auto operation mode

16 Dehumidiﬁcation mode

17 Fan mode

18 Temperature setting/room tempera-

ture checking

Airﬂow setting

Celsius/fahrenheit switching

20 Timer

21 MAINTENANCE AND

SERVICE

21 Indoor unit

22 Operation tips!

22 When the air conditioner is not

going....

23 Troubleshooting Tips! Save time and

money!

23 Call the service immediately in the fol-

lowing situations

ENGLISH

BEFORE USE

Preparing for operation

- Contact an installation specialist for installation.

- Use a dedicated circuit.

Usage

- Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.

- Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices.

- Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.

Cleaning and maintenance

- Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.

- Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.

- When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is accidentally triggered on while cleaning inner parts of the unit.

ENGLISH

Service

For repair and maintenance, contact your authorized service dealer.

PRODUCT INTRODUCTION

On/Off

Filter sign

Timer

Defrost mode

ENGLISH

PRODUCT INTRODUCTION

Name and function of parts

1 Indoor unit 2 Outdoor unit 3 Remote controller 4 Inlet air 5 Discharge air 6 Refrigerant piping, connection electric wire 7 Drain pipe 8 Ground wire

Wire to ground outdoor unit to prevent electrical shocks.

ENGLISH

Operation indication lamps

: Lights up during the system operation.

: Lights up after 2400 hours from the time of first operating unit.

: Lights up during timer operation.

: Lights up during defrost mode or hot start operation.

(heat pump type)

ENGLISH

Wireless remote controller

5 6

7 8

Operation Mode

Cooling Mode

Auto Mode or Auto Changeover

Dehumidification mode

Heating Mode

Fan Mode



Cooling Model( ), Heat Pump Model( )

PRODUCT INTRODUCTION

VANE ANGLE button (Useless) Used to set each vane angle.

FUNCTION SETTING button (Useless) Used to set or clear auto clean, smart clean, electric heater or individual vane angle control.

ON/OFF button Used to turn on/off the unit.

10 11

15 16

JET COOL button Speed cooling operates super high fan speed.

LEFT/RIGHT AIRFLOW button (Useless) Used to set the desired left/right(horizontal) airflow direction.

UP/DOWN AIRFLOW button Used to stop or start louver movement and set the desired up/down airflow direction.

ON TIMER button Used to set the time of starting operation.

SLEEP TIMER button Used to set the time of sleeping operation. (Refer to timer setting)

SET / CLEAR button Used to SET / CLEAR the timer. Used to set the current time (if it input for 3 sec.)

PLASMA button (Useless) Used to start or stop the plasma-purification function.

ROOM TEMPERATURE SETTING button Used to select the room temperature.

OPERATION MODE SELECTION button Used to select the operation mode.

INDOOR FAN SPEED SELECTION button Used to select fan speed in four steps low, medium, high and auto.

ROOM TEMPERATURE CHECKING button Used to check the room temperature.

OFF TIMER button Used to set the time of stopping operation.

TIMER SETTING(Up/Down)/LIGHT button Used to set the timer. Used to adjust the brightness.(if it is not time adjust mode)

RESET button Used to reset the remote controller.

ENGLISH

PRODUCT INTRODUCTION

Caution of handling the remote controller

CAUTION

- Aim at the signal receiver on the wired remote controller so as to operate.

- Be sure that there are no obstructions between the remote controller and the signal receptor.

- Do not drop or throw the remote controller.

- Do not place the remote controller in a location exposed to direct sunlight, or near the heating unit, or any other heat source.

- Block a strong light over the signal receptor with a curtain or etc. so as to prevent the abnormal operation. (ex:electronic quick start, ELBA, inverter type fluorescent lamp)

NOTE

The wireless remote controller do not operate the swirl mode.(4Way type)

For more details refer to the wireless remote control accessory manual.

The actual product can be different from above contents depending upon model type.

ENGLISH

OPERATING INSTRUCTION

ENGLISH

How to insert the batteries

Remove the battery cover by pulling it according to the arrow direction.

Insert new batteries making sure that the (+) and (-) of battery are installed correctly.

Reattach the cover by sliding it back into position.

NOTE

- Always use/replace both batteries of same type.

- If the system is not to be used for a long time, remove the batteries to save their working life.

- If the display screen of remote controller starts, fading replace both of the batteries.

Wireless remote controller maintenance

Choose a suitable place where its safe & easy to reach.

Fix the holder to wall etc with the supplied screws firmly.

Slide the remote controller inside the holder.

NOTE

- Remote controller should never be exposed to direct sunlight.

- Signal transmitter & receiver should always be clean for proper communication. Use a soft cloth to clean them.

- In case some other appliances also get operated with remote control, change their position or consult your serviceman.

OWNER'S INSTRUCTION

ENGLISH

OWNER'S INSTRUCTION

ENGLISH

Cooling mode standard operation

Cooling mode - power cooling

1 Press the ON/OFF button.

The unit will respond with beep sound.

2 Press MODE button to select cooling

mode.

3 Set the desired temperature by pressing

TEMP button. Press ROOM TEMPERATURE button to check the room temperature. When setting the desired temperature is higher than room temperature, cooling wind isn’t blow out.

Setting temp. range : 18~30 °C(64~86 °F)

1 Press the ON/OFF button.

The unit will respond with beep sound.

2 Press MODE button to select cooling

mode.

3 Press the JET COOL button. The unit will

operate in super high fan speed in cooling mode.

- Wall mounted models operate power cooling mode for 30 minutes.

4 To cancel the power cooling mode press

the JET COOL button or the fan button or the room temperature setting button again and the unit will operate in high fan speed in cooling mode.

ENGLISH

OWNER'S INSTRUCTION

ENGLISH

Code Feel 2 Cold 1 Slightly cool 0 Neutral

-1 Slightly warm

-2 Warm

❈ Please select the code depend on your feeling.

During auto operation mode

ENGLISH

Auto operation mode

OWNER'S INSTRUCTION

- If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must set the mode and the desired temperature again.

ENGLISH

1 Press the ON/OFF button.

The unit will respond with beep sound.

2 Press MODE button to select auto opera-

tion mode.

3 Set the desired temperature.

The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. If you feel hot or cold, press TEMPERATURE SETTING buttons for more cooling or heating effect. You cannot switch the indoor fan speed. It has already been set by the auto operation mode rule.

+ 32 hidden pages