LG AS40GVSL2, AS40GVGL2 Users guide

<![if ! IE]>

<![endif]>ENGLISH

OWNER’S MANUAL

LG Air Purif ier

Please read this manual carefully before operating your set and retain it for future reference.

Model name : AS40GVGL2

AS40GVSL2

P/NO : MFL68181343	www.lg.com/cn
Rev.00_101116

<![if ! IE]>

<![endif]>ENGLISH

2 SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

The precautions related with the safety shown below are to prevent unexpected hazard and damage through safe and accurate operation of the product.

! WARNING

If not followed, It may cause death or major injury to the user.

! CAUTION

If not followed, it may cause injury to the user or property damage.

This symbol is to alerts you to hazardous practice and operation.

!Check carefully and follow instructions to avoid hazard.

This symbol displays how to use avoiding hazard.

! WARNING

Installation

•Do not arbitrarily change or extend the power line.

-It may cause fire and electric shock.

•When the socket is damaged or loosened, do not use it.

-It may cause fire and electric shock.

•Do not arbitrarily disassemble, repair, or modify the product.

-It may cause fire and electric shock.

•Do not use the product at the location where moisture or oil are prevailed such as toilet or bathroom, laundry, etc.

-It may cause fire and electric shock.

•When using the multi-socket, do not use several appliances at the same time.

-Excessive use of electric power may cause fire and electric shock.

•When gas is leaked, perform the ventilation by opening the window before operating the air purifier.

-Otherwise, it may cause the explosion, fire, and burn.

•Do not store or use combustible gas or flammable material near the product.

-It may cause fire or product failure.

•If abnormal noise, odor or smoke is coming out from the product, pull out the power plug and contact the customer care center.

-It may cause fire and electric shock.

•Do not place heavy object on the power cord or have power cord squashed under equipment.

-It may cause fire and electric shock.

•Carry out the installation by avoiding direct sunlight, heating appliance, and dampness.

-It may cause the electric shock, fire, and failure.

•Do not place fire source near to the product.

-It may cause fire.

SAFETY PRECAUTIONS 3

Operation

•Insert securely the power plug up to the end of its plug so that it will not be shaken.

-If connection is unstable, it may cause fire.

•Do not arbitrarily change or extend the power line.

-It may cause fire and electric shock.

•Do not allow water to be infiltrated into the product.

-It may cause fire and electric shock.

•Do not place rug etc. on the power cord.

-If heavy object is placed on the rug because the cord is invisible, it may cause fire and electric shock.

•Do not touch the power plug with wet hand.

-It may cause electric shock and injury.

•Do not remove the plug by pulling its power cord section.

-It may cause fire and electric shock.

•Do not place obstacles at the air suction port or discharge port of the product.

-It may cause the product failure.

•Do not use the product where water can be easily splashed.

-It may cause fire or electric shock.

•Do not allow children to climb up the product or arbitrarily touch it.

-It may cause failure, injury.

•Do not move the product while it is under operation.

-It may cause fire and electric shock or partial damage of the product may occur.

•Do not put hands , glue or metal at the air suction port or discharge port of the product.

-It may cause product damage, injury, or electric shock.

•Do not install the product at the location where excessive industrial oil smoke or metallic dust is prevailed.

-It may cause fire and product failure.

•Do not move the product by grabbing any other parts other than the handle of the product.

-The product may partially be damaged.

•If product repair is required, contact the service center.

-Arbitrary disassemble or repair may cause electric shock or fire.

•If the product is flooded, make sure to contact the service center.

-There is a risk of electric shock or fire.

•Do not apply any impact on the front panel.

-It may cause injury, product damage or electric shock.

•Do not let children or people that are difficult to operate the device safely alone operate the product.

-It may cause injury or electric shock.

•If the power cord is damaged, request for repair to the service technician to prevent any risk.

-If not, It may cause fire, electric shock or product failure.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 SAFETY PRECAUTIONS

! CAUTION

Installation

•When installing near to TV or audio, provide more than 1 m of distance with them.

-TV or audio may have malfunction.

•When pulling out the power plug, pull out by grabbing the head of the plug.

-It may cause injury or electric shock.

•In kitchen, do not use the product as ventilation fan or hood for range.

-The life will be shortened.

•During the cleaning, make sure to stop the product and pull out the power plug.

-The fan is rotating at a high speed, and it may cause injury.

•Avoid places near fire, heating appliances, or under direct sunlight.

-It may cause fire.

•Do not use the product to remove toxic gas such as carbon monoxide.

-It may cause product failure.

•Install the product at the flat location and do not throw it down or give impact.

-It may cause product failure.

•Provide distance of more than 1.5 m from lighting appliance and more than around 10 cm from the wall.

-It may cause the product discoloration and the cleaning capability may be deteriorated.

•Use only 220 V~.

-It may cause fire and electric shock.

•Do not install in transportations (vehicle/vessel, etc.).

-It may cause failure.

Operation

•Do not use the product for special usages/places such as preservations of animal/plant, precision equipment, art pieces, etc.

-It may cause property damage.

•Do not clean with strong detergents such as solvents, but use soft cloth.

-It may cause fire and product deformation.

•If it is not used for a long period of time, pull out the power plug.

-It may cause product failure or fire.

•Do not operate with wet hand.

-It may cause electric shock.

•Do not climb up or place object on Air Purifier.

-It may cause injury by falling or flip over.

•Make sure to insert the Dual Protection Filter, and clean the filter every month.

-It may cause shortening of the filter life.

•Be sure to insert all the filters before the use and perform regular cleaning of the filter.

-Otherwise, It may cause product failure.

•Install the product at the flat location and do not throw it down or give impact.

-It may cause fire or product failure.

SAFETY PRECAUTIONS		5
		<![if ! IE]> <![endif]>ENGLISH

• Do not use the power cord as tied. - Heat generation may cause fire.

• Start cleaning and mending after pulling out the power plug and when the fan stops rotating. - You may get electric shock or injury.

• Do not use it as a ventilator.

- The product life may be shortened.

• Completely dry the Dual Protection Filter in a shadow until there is no moisture after washing. - Otherwise, It may cause failure.

• Do not insert inflammables inside the product. - It may cause fire or product failure.

• Do not let the moisture emitted from the humidifier directly touch the product. - It may cause electric shock, fire, or product failure.

• Do not open the backside panel while product is in operation. - Fan is rotating, and it has a risk of injury.

<![if ! IE]>

<![endif]>ENGLISH

6	TABLE OF CONTENTS

TABLE OF CONTENTS

2 SAFETY PRECAUTIONS		17	HOW TO INSTALL
	17		How to install the filter before using it

7HOW TO INSTALL

7	Selecting installation place		18	HOW TO CLEAN
7	Use the air purifier as this.	20		How to clean the filters
		20		How to clean exterior
		21		How to clean the sensor

8NAME OF THE PARTS

8Front side

8	Rear side		22 HOW TO STORE THE
9	Operation display and control part		PRODUCT
10	Filter system		22 How to store the product
11	HOW TO USE		23 TROUBLESHOOTING BE-
11	Air Cleaning Operation		FORE CALLING FOR SERV-
12	The Jet Clean function		ICE

12Ionizer Operation

13Indicator display

14	Off Timer operation	25 PRODUCT SPECIFICATION
15	Lock function
16	Filter Check lamp

HOW TO INSTALL	7

HOW TO INSTALL

Selecting installation place

Main Unit

•Place with handy power connections

•Place with no obstacle to clog air inlet

•Place with horizontal surface and rich air circulation

! WARNING

There can be product failure if the air purifier is installed on a moving vehicle such as cars, boats and others.

! WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Use the air purifier as this.

•Reduce the use of air purifier if possible when you cook smelly food such as fish grill.

-The vaporized oil from the cooking may affect to the performance and lifetime of the filters, and the smell may stick on the filter as well.

•Maintain a minimum distance of 1 meter from the air purifier when you sleep.

-The fan speed of the air purifier is not that high. However you may feel a chill.

•Do not place in a corner edge.

-Avoid a place surrounded with furniture and electronic equipment, or in a corner edge. The air purifier will not function well if it is installed in a corner edge.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8 NAME OF EACH PART

NAME OF THE PARTS

Front side

Display

Lighting lamp

This is the light indicating the quality of the air in the room. It displays the cleanliness according to the indoor cleanliness detected by the odor sensor.

• Display of cleanliness

(contaminated) violet → purple → red → orange → yellow → green (clean)

After the start of the operation, during the sensor stabilization period (30 seconds), the Lighting lamp blinks in white color. After the stabilization, indoor cleanliness is displayed. (The display of clean air indicator may differ per products for the initial sensor value.)

Rear side

Dust sensor

Handle

Air outlet

Air Purifier filter (Pre Filter + Cabin Filter

+ Filter Case)

Power cord

Rear panel	Sensor
	(odor sensor)

h Shape of the power cord can be different by country. h The shape of the sensor could differ by the model. h The odor sensor measures odors.

						NAME OF EACH PART				9
Operation display and control part
		Start/stop button			Indicator button
			Speed button			Filter Check lamp

<![if ! IE]>

<![endif]>ENGLISH

	Dust/Odor		Ionizer lamp
	indicator display
Jet Clean/Ionizer button		Off Timer/Lock button

Start/stop button	Use to start and stop the product.
Speed button	It adjusts wind volume.
Jet Clean/Ionizer butto	It cleans the indoor air faster for certain period of time.
	If you press the button for 3 seconds, you can lock/unlock the Ion-
	izer function.
Indicator button	Choose the size of Micro dust particles.
Off Timer/Lock button	It adjusts wind volume for sound sleep and can set the time when
	the product is turned off. If you press the button for 3 seconds, you
	can enter/reset Lock function.
Filter Check lamp	If the filter Check lamp is on, check if the filter is contaminated, and
	if it is seriously contaminated, clean or replace the filter.
Ionizer lamp	If the Ionizer lamp is on, the ions are generated to remove various
	bacteria in the indoor air.
Dust/Odor indicator	Show the size of dust or odor particles and its density.
display

ηGuide to the size of dust particles

PM10: dust particle size is equal or below 10 μm

(occurs in the combustion at the site, automobile exhaust, etc.) PM2.5: dust particle size is equal or below 2.5 μm

(icon components, carbon compounds, and metal compounds) PM1.0: dust particle size is equal or below 1.0 μm (cigarette smoke, etc.)