LG AJ-LCF3 Owner’s Manual

OWNER’S MANUAL

LAMP

AJ-LCF3

1

P/NO: 3828VA0584M (1007-REV00)

www.lg.com

2

Contact your dealer for replacing a new lamp.

The lifetime of the lamp depends on how much the
projector is used. You can see the used lamp time in
the Lamp Time of INFORMATION section. You must

replace the lamp when:

ꔈThe projecte d imag e gets dark er or star ts to

deteriorate.
ꔈThe lamp indicator is magenta.
ꔈThe message “Replace the lamp” appears on the

screen when turning the projector on.

Lamp indicators

< Top panel of the

Projector >

Be careful when replacing lamp

• Press the POWER button on the control panel or remote control to turn
off power.

• If the operation indicator LED is cyan and blinking, do not disconnect the
main supply until the operation indicator LED is lit up constantly (blue).

• Allow the lamp to cool for 1 hour before replacing it.

• Replace only with the same type lamp from an LG Electronics Service
Center. Using another manufacturers lamp may cause damage to the
projector and lamp.

• Pull out the lamp only when replacing the lamp.

• Keep the lamp unit out of reach of children. Keep the Lamp away from
heat sources such as radiators, stoves etc.

• To reduce the risk of fire do not expose the lamp to liquids or foreign
materials.

• Do not place the lamp near any heat source.

• Make sure the new lamp is securely tightened with screws. If not, the
image may be dark or there could be an increased risk of fire.

• Never touch the glass on the lamp. Image quality may be compromised
or lamp life maybe reduced.