LG ACC-CR-EH5C User Manual

Owner's Manual

Rotating Ceiling Mount Kit

After reading the manual, please keep it handy for future reference.

ACC-CR-EH5C

*MFL69681701*

www.lg.com

P/No: MFL69681701 (1607-REV00)

Printed in Korea

ENGLISH

SAFETY PRECAUTIONS

ENG

• If you are a professional installer, please read this manual carefully before installing the product.

• If you are a professional installer, please hand this manual to the user after installation. Please ensure that

the user also reads the manual carefully and retains it for future reference.

After reading the installation manual, please keep it nearby for future reference.

Precautions When Installing the Product

WARNING

• The product should be installed by a professional installer specified by the retail store.

- Product installation by a non-professional installer is very dangerous and may cause personal injury.

• The product should be installed where its weight can be fully supported.

- If the product is installed on a weak surface, the product may fall, causing injury.

• When moving or replacing the product after installation, contact a professional installer specified by the

retail store.

- Installation or movement of the product must be carried out by a skilled professional. If an unqualified person moves or installs the product, it may cause safety risks.

• Do not hang on this product or strike it in any way.

- The product may fall and cause injury.

• Do not grab the product or expose it to impact while in operation.

- This may damage or break the motor.

CAUTION

• Follow the instructions in the installation manual to properly install this product.

- Failure to follow the instructions in the installation manual could lead to improper installation and result in serious injury or product damage.

• Four or more people are required to install or adjust the height of the product.

- If you try to install or move the product alone, it may fall, causing injury or damage to the product.

• Before installation, confirm that the ceiling is made of material that is strong enough to hold the product,

and use the anchors and screws provided.

- If you use anchors and screws that are not specified by the manufacturer, they may not hold the weight of the product, causing safety issues.

• When drilling holes into the ceiling, make sure you use a drill and drill bit with the specified diameter.

Ensure that you also follow the instructions regarding the depth of the holes.

- Otherwise, the product may be installed incorrectly and cause safety issues.

• Do not clean the product with a wet towel, and do not place a heater or humidifier beneath it.

- Moisture permeating into the product, including from steam and heat, may result in a fire, electric shock or damage to the product.

• Keep this product away from sprinklers, sensors, high-tension wires and power sources. Do not install it in

a location where vibrations or impacts are likely to occur.

• Disconnect the plug from the outlet before installation.

- Otherwise, it may cause an electric shock or fire.

• Wear working gloves when installing the product. Do not use bare hands.

- Otherwise, it may cause personal injury.

• Be sure to use the cable gender provided. Otherwise, it may cause damage to the connector from friction

between the product and the ceiling. (May differ depending on the model.)

• When seeking repairs, remove the product from the area it is installed so that parts may be replaced.

- Parts cannot be replaced when product is installed on the ceiling.

Precautions for the AC Adapter and Power

WARNING

• If water or any foreign substance enters the product (TV, device, power cord or AC adapter), disconnect

the power cord immediately and contact the service center.

- Otherwise, the damage to the product may cause a fire or electric shock.

• Always connect the power cord to a grounded outlet.

- Failure to do so may result in electric shock or personal injury.

• Do not touch the power cord or the signal cable in the event of thunder and lightning.

- There is risk of electric shock.

• Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe

or dry them thoroughly before use.

- Failure to do so may cause electric shock or fire.

• Insert the power plug securely so that it does not come loose. Do not use the product if the power outlet

is loose.

- A bad connection may cause a fire or electric shock.

• Make sure the power cord is fully inserted into the AC adapter.

- If loose, the poor connection may cause a fire or electric shock.

• Do not insert a conductor such as a chopstick into the other side of the cord while the power cord is

inserted into the wall outlet. Also, avoid touching the power plug immediately after pulling it out of the wall outlet.

- This may cause electric shock.

• Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.

- The use of non-approved products may cause fire or electric shock.

• Use the product at the rated voltage only.

- Failure to do so may result in damage to the product or electric shock.

• Do not use a multi-tap outlet shared with many devices. Use a dedicated multi-tap outlet with a ground

terminal.

- Otherwise, this may result in fire due to excessive heat.

• Disconnect the power cable when the product will not be used for a long period of time.

- Dust may accumulate, resulting in electrical short circuits, electric shock or fire due to overheating, combustion or insulation degradation.

ENGENGLISH

• When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive

ENGLISH

force.

ENG

- A damaged cable may result in electric shock or fire.

• Be careful not to step on or place heavy objects (electronic appliances, clothing, etc.) on the power cord or

AC adapter. Be careful not to damage the power cord or AC adapter with sharp objects.

- Damaged power cords may cause a fire or electric shock.

• Never disassemble, repair or modify the power cord or AC adapter.

- This may cause a fire or electric shock.

• To turn off the main power, remove the power cord, which should be positioned so it is easy to access for

operation.

CAUTION

• Do not remove the power cord when the product is in use.

- Otherwise, the product may be damaged due to the sudden loss of power.

• Be sure to keep the outlet, AC adapter and pins of the power plug clean from dust, etc.

- Failure to do so may cause fire.

• Do not turn the product on or off by plugging in or unplugging the power plug from the power outlet. (Do

not use the power plug as a switch.)

- This may cause an electric shock or product malfunction.

• Keep the power cord away from any heating devices.

- The cord coating may melt and cause fire or electric shock.

Precautions When Using the Remote Control

CAUTION

• Remove any obstacles.

• The remote control may not function properly in sunlight or under a strong lamp. Move the product if it is

being used in these conditions.

• Only use the specified type of battery. Do not insert batteries that are not rechargeable into the charger.

- Burst or leaking batteries may cause fire or electric shock.

• Avoid locations near heaters or locations with high humidity.

• Do not expose the batteries to excessive heat. Keep them away from direct sunlight, fireplaces, electric

heaters, etc.

BEFORE INSTALLATION

• Do not use this product for purposes other than to attach the set to the ceiling.

• Do not install or use the rotating ceiling mount in a careless manner. Failure to do so could cause it

damage or lead to safety hazards.

• If there are any aspects of the installation manual you do not understand after reading, refrain from

installing the product and contact the service center. If there are still aspects of installation you do not understand after inquiry, contact a professional installer to install the product.

• An individual with experience in mechanical and architectural fields may not have any difficulty

understanding this installation manual or installing the product, even if they are not professional installers.

• It will be most convenient for you to install the rotating ceiling mount based on the instructions specified

in the installation manual.

• Only install on horizontal ceilings.

Do not install on slanted or curved ceilings. LG Electronics is not liable for problems that occur as a result of installing the product on a slanted or

curved ceiling.

• Check that the accessories provided with the product are all included before installing. LG Electronics is

not liable for any damage or loss of the accessories after the package has been opened.

• Make sure that parts are kept out of reach of children to prevent accidents, such as choking due to

swallowing.

• Make sure that the screws are tight.

Applying excessive force to screws may cause damage to the ceiling, affect product performance, or cause product damage.

• Only use the designated set for installation.

- Failure to do so may break the product or cause an accident of some kind.

• In order to prevent any accidents, take caution when handling tools during the installation.

• Install in a location that is out of reach.

• This product includes a motor and gears. Forcing the product to stop during rotation can cause it damage.

The warranty will no longer be valid in such circumstances.

ENGENGLISH

Tools for Installation

Philips screwdriver (manual or motorized), 8 mm spanner, level meter, drill, Ø 8-mm drill bit for concrete

ENGLISH

ENG

(M3 x L5.5)

CAUTION

• When installing or adjusting the height of this product, two or more people are required. If you try to

install or move the product alone, it may fall, causing injury or damage to the product.

1 Open the product box and remove the packaging materials and the T-con box in the order they appear.

ENGENGLISH

2 Separate the cover and the ceiling mount.

T-con box

3 After connecting the pipe to the set, assemble the IR cable-linked cover and ceiling mount in order. The

ENGLISH

ENG

number of pipes connected is optional.

NOTE

• Prior to assembling the cover, first insert the IR cable receptor through the cover from the bottom, then

temporarily attach it to the cover using the magnetic tape provided.

+ 16 hidden pages