LG AB-BL200X, AB-BP200X, AD-BL200H, AD-BX200X, AD-BP200H Owner's Manual
Owner's Manual
e-MultiBoard Mounting Bracket & Stand
Please read the safety information carefully before using the product.
AB-BL200X
AB-BP200X
P/NO : MFL63640508(1203-REV02)
AD-BX200X
AD-BL200H
AD-BP200H
e-MultiVision Bracket AB-BL200X, AB-BP200X
E-MultiBoard Mounting Bracket – Landscape
AB-BL200X
E-MultiBoard Mounting Bracket – Portrait
AB-BP200X
Accessories
4 Guide Spacers
4 Guide Spacer Screws
(M8 x 32mm)
e-MultiVision Stand AD-BX200X, AD-BL200H, AD-BP200H
AD-BX200X
2 Bracket Screws
(M8 x 100mm)
2 Nuts
AD-BL200H, AD-BP200H
Owner's
Manual
Wrench
Stand Frame bottom
4 Screws
(M8 x 100mm)
2
2 Screws
(M8 x 15mm)
Stand Frame Vertical
2 Nuts
4 Screws (M8 x 15mm)
Stand Frame Horizontal
4 Nuts
Safety Precautions
- If you are a professional installer, please read this manual carefully before installing the product.
- After installing the product according to the manual, ensure that the user also reads the manual carefully.
After reading the manual, please keep it handy for future reference.
Warning
ENGLISH
The product should be installed by a qualified professional
specified by the retail store.
Installing the product without a qualified professional is dangerous and may
cause injury.
When moving or replacing the product after installation,
contact a qualified installer specified by the retail store.
Installation or movement of the product must be carried out by a skilled
professional. If an unqualified person moves and installs the product, this may
cause safety issues.
Prior to installing the product, arrange the power cable and
signal cable to prevent damage during the installation.
Damaged cables may result in a fire, electric shock or damage to the product.
To stand the product upright, two or more people are
needed.
If you try to stand the product up alone, it may fall and cause an injury due to
its weight.
Caution
Follow the instructions in the manual to install the product.
If you do not follow the instructions, the product may not be installed properly,
causing serious injury or damage to the product.
The product should be installed where its weight can be
supported.
If the product is installed on a weak surface, the product may fall and cause
injury.
Do not hang on the product or impact the product.
The product may fall and cause injury.
Do not stand or hang on the product when upright.
The product may fall and cause injury.
To install or adjust the height of the product, two or more people
are needed.
If you try to install or move the product alone, it may fall and cause injury or
damage to the product.
Before installing the product, check whether the wall is strong
enough to hold the product.
Installing the product on a wall that cannot hold its weight may cause safety
issues.
Do not clean the product with wet towels, and do not use a heater or
humidifier underneath the product.
Moisture permeating into the product, including through steam and heat, may
result in a fire, electric shock or damage to the product.
Make sure that the power cord is removed from the outlet
before installing the product.
Otherwise, it may cause an electric shock or a fire.
Place the product on a flat, hard floor.
Leaving the product on a carpet or cushioned surface may cause the
product to fall and result in an injury.
If the external surface has stains or fi ngerprints, gently wipe the stained area only.
Do not apply excessive force to remove the stain. This may cause scratches or discoloration.
Keep the product away from sprinklers, sprinkler sensors, hightension wires and power sources. Do not install the product in a
location where vibrations or shock impacts are likely to occur.
Wear working gloves when installing the product. Do not use bare
hands.
Otherwise, it may cause injury.
Do not place the product on an unstable shelf or on a slanted or
vibrating surface.
The product may fall or turn over and cause injury.
3
Transportation method for panel protection
When moving or lifting the monitor, read the
following to prevent the monitor from being
scratched or damaged and for safe transportation
regardless of its type and size.
CAUTION
Avoid touching the screen at all times, as this
may result in damage on the screen.
It is recommended to move the monitor in
the box or packing Cover that the monitor
originally came in.
Before moving or lifting the monitor,
disconnect the power cord and all cables.
Hold the top and bottom of the monitor frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
When transporting the monitor, do not expose
the monitor to jolts or excessive vibration.
When transporting the monitor, keep the
monitor upright, never turn the monitor on its
side or tilt towards the left or right.
When transporting the monitor by hand,
hold the monitor as shown in the following
illustration.
When the product is carried upright, 2 persons
carry by holding the bottom and top of the
front, and when it is being put down, put down
carefully for the panel not to be touched.
When the product is carried laid down, 2
persons carry by holding the bottom of the
back, and when it is being put down, put down
carefully for the panel not to be touched.
4
Storage method for panel protection
<Correct method>
ENGLISH
If the product needs to be
set upright, hold both sides
of the product, and tilt backward carefully for the panel
not to touch the floor. (The
setting upright of the set is
possible with the outer frame)
<Incorrect method>
Panel
Panel
When laying down the product, lay a cushion on a flat
floor, and put the product on
it with the panel of the product facing down.
Panel
Cushion
If the product is tilted to the
side of the panel, the bottom
of the panel may be damaged.
NOTE
Handle the product with care. The product may be damaged by shocks.
If the product is tilted to the
edge of the panel, the edge
of the panel may be damaged.
5
Before Installation
* Do not use this product for purposes other than to attach the monitor to the wall.
* Be careful when installing and using the bracket to prevent product damage and safety hazards.
* If the instructions in the manual are unclear, stop the installation and contact the service center.
If you are still having problems understanding the instructions after contacting the center, seek a professional to install the product.
* When installing the bracket on a concrete wall or on any other walls capable of holding the strength specified in the manual, you may detach the standard gap
bracket for stud wall mounting then follow the instructions for attaching the bracket to make the installation easier.
* Only install the bracket on vertical walls. Do not install the bracket on a wall inclined at an angle, exceeding the standard range or on the ceiling.
LG Electronics is not liable for problems that occur due to the installation of the product on a slanted wall or on the ceiling.
* Check the accessories provided with the product before installing. LG Electronics is not liable for any damage to or loss of the accessories after the package has
been opened.
* Make sure that the accessories are kept out of reach of children to prevent safety accidents, such as choking due to swallowing small parts.
* Make sure that the screws are fixed tightly.
Applying excessive force to screws may impair the performance or reduce the strength of the product, or cause it to become damaged.
* Make sure that the monitor to be installed does not exceed the specified tension load and that no external force is applied.
* In order to prevent accidents, take care when handling tools during installation of the product.
<Tools for Installation>
Philips screwdriver (manual or electric)/8mm spanner/drill/level meter
How to Attach the Bracket (Stand Type)
6
Loading...