LG A9PETNBED2X User Manual

Download

Page 1

김 남 철

MFL69883606

RELEASING THIS DRAWING WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES.

이 도면은 LG전자의 자산으로 불법 유출시 관계법과 회사규정에 의해 처벌됨.

SEC.

WORK

적용모델

S9****

재 질 인쇄방법

표지 : 아트지 150g 무광 Laminating

OFFSET 인쇄

내지 : 모조지 80g OFFSET 인쇄

인 쇄 도 수

표 지 내 지

4도 3도

PAGE

24, A5

REMARK

호주향

English

<< 주기 >>

1. 재질, 인쇄방법, 인쇄도수, 외곽치수등은 작업표에 준한다.

2. 인쇄내용, 문자크기 및 형상, 선의 굵기 등은 설계에서 제시된 도면에 준함.

3. 외곽치수는 절단후 치수임.

4. 양산전에 설계 한도를 득할 것.

REV. NO.

기호

210

REVISION DESCRIPTION

변경 사항

148

REF. NO.

시방 번호

DATE

년/월/일

PREPARED

시방자

김남철송상영18.01.12EKFI100190헤파관련 문구 삭제 (20Page)

APPROVED

승인자

5. 본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34 를 만족할 것.

<< NOTES >>

1. Material, printing and exterier size are refer to work tables.

2. Printing, text size and line are based on LG design drawing.

3. Exterier size on the drawing is cutting line.

4. Before product controlled by criteria sample.

5. The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB, PBDE) and details should comply with LG standard of LG(63)-A-5501-34

DR COMPLETED

도면 DR 완료

완료일 :

TRIG.

MODELING

LG 전자 (주)

LG Electronics Inc.

UNIT SCALE

REVIEWEDDESIGNED

신 주 은

18.01.10 18.01.11

CHECKED APPROVED

RELATED DWG.

I T L E

DWG. No.

PDF

ILLUSTRATOR

MANUAL,OWNER’S

A9 호주향

MFL69883606

1/1

Page 2

USER'S MANUAL A9

Make sure to read the "Safety Cautions" carefully before starting to use this product. Please keep this User's Manual within easy reach of the user. As the product is only intended for domestic use such as household cleaning, it must not be used for commercial, experimental or industrial purposes. Make sure to fully charge the product's battery before first use of the product after purchasing it.

MFL69883606

www.lg.com

Page 3

Page 4

TABLE OF CONTENTS

SAFETY CAUTIONS .................................................... 04

PACKAGE INFORMATION .......................................... 10

INSTALLATION ...........................................................11

Installing the standing charging station ..................................................................11

Installing the wall-mount station ................................................................................12

Uninstalling the station.....................................................................................................12

Storage of the combination tool and crevice tool...............................................12

HOW TO USE .............................................................. 13

Note about using the product .......................................................................................13

Using the Product ................................................................................................................13

Charging the Product .........................................................................................................14

Power / Suction Strength button ................................................................................14

Using the nozzles .................................................................................................................15

MAINTENANCE .......................................................... 16

Cleaning the Dustbin ..........................................................................................................16

Cleaning the Filters .............................................................................................................16

Cleaning the Power Drive Floor/Carpet Nozzle ...................................................18

Cleaning the Bedding Power Punch ...........................................................................18

This User's Manual may contain images or contents that differ slightly to the purchased product.

POINTS TO CHECK BEFORE CONTACTING

CUSTOMER SERVICE. ................................................ 19

DISPOSAL INFORMATION ......................................... 20

Disposal of old products not related with the purchase of a new product

......................................................................................................

PRODUCT SPECIFICATIONS ...................................... 20

Page 5

SAFETY PRECAUTIONS

The following cautions are intended to protect you from unexpected risk or property loss by ensuring safe and correct usage of the product. Cautions are categorized into 'Warning' and 'Caution', which mean:

Pictograms are designed to draw attention to matters and uses that may pose a risk to the user. Make sure to carefully read any item marked with this symbol and comply with it to prevent any risk.

WARNING

Failure to comply with this warning may result in serious damage, injury or even death to the user.

CAUTION

Failure to comply with this warning may result in damage to the product or moderate injury to the user.

WARNING

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

2. Children should be supervised to ensure that they do not play with the appliance.

3. If the supply cord is damaged, it must be replaced by an LG Electronics Service Agent in order to avoid a potential hazard.

4. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be performed by children without supervision.

Page 6

Installation and Usage

Do not install, charge or store the product where it may be exposed to water, rainfall or severe moisture. Do not use the product in any outdoor location, workshop or garage environment.

•Such conditions will leave the product vulnerable to fire when charging the battery.

•Please install, charge or store the product in a well-ventilated place.

Make sure to avoid places where there is a risk of leakage of flammable gas, industrial oil or metallic dust.

•It may cause product malfunction or damage.

If you intend to use the charging station by "standing" it vertically (standing type), make sure to secure it to the wall with the appropriate type of screws .

•Otherwise, the charging station or product may slant and become damaged or cause property damage or injury.

Please place the charging station on an even surface.

•Otherwise, the product may fall and sustain damage or cause an injury.

If you intend to mount the charging station on a wall (wall-mounted type), make sure to secure it tightly to the wall using the appropriate type of screws.

•Failure to do so may damage the product and/or cause an injury.

Please use the anchoring screws only when the wall is made of concrete or is solid enough.

•If the Station mounting is performed on an unsuitable wall it may cause injury and damage the property or product.

Never install the charging station on a wall with any piping (gas, water, air) or power cables or wires behind it.

•There is a risk of injury from electric shock, fire or flooding.

Do not use or store the product at temperatures below 5 ° C or above 38 ° C.

•Failure to do so may damage the product.

Page 7

Power requirements

This product should only be used with AC 230~240V. Make sure to check the power specifications of the place where you intend to use the product.

•The wrong specifications will result in electric shock or damage the product in the event of a short-circuit.

Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.

•The power cord may get damaged and cause electric shock or injury.

Please refrain from using multiple power appliances in one power board or power socket and make sure to use a power socket with a capacity of 10A.

•Failure to do so may result in fire due to abnormal overheating of the socket.

•Or it may activate the circuit breaker leading to a loss of power.

Never touch the power cord and plug with a wet hand.

•This may result in injury or electric shock.

Please clear any dust or water from the power cord and plug with a dry cloth.

•Failure to do so may result in electric shock, short circuit or fire.

When unplugging the power cord, never pull the cord itself and always hold the power plug.

•Failure to do so will damage the cord it and may result in electric shock or fire.

Stop using the product and contact the customer service department of LG Electronics if the power cord or power plug is damaged or the holes of the power outlet socket are loose.

•Failure to do so may result in electric shock or fire.

Make sure to unplug the power cord when cleaning or maintaining the charging station.

•Failure to do so may result in injury or electric shock.

Make sure to unplug the power cord when the product is not to be used for an extended period of time.

•Failure to do so may result in electric shock, short circuit or fire.

Make sure to organize the power cord of the Adaptor while using or cleaning the product.

•Otherwise, the cord may get tangled with the product and result in malfunction, electric shock or injury if its disconnected or broken.

Avoid touching the pins of the power plug with your finger(s) when unplugging the power cord.

•Failure to do so may result in electric shock or fire.

Do not to let children or pets get close to the product when using, charging or storing.

•It may damage the product and/or result in injury.

Do not hold the charging station upside down with the battery in the charging station.

•Otherwise, it may damage the product and/or result in injury.

Page 8

Proper usage

Make sure that no child is allowed to use the product.

•The product is too heavy for a child to handle properly.

Make sure that no hand, foot, hair or clothes gets stuck in the rotating brush or wheel while using or cleaning the product.

•Failure to do so may damage the product or result in injury.

No one other than a qualified technician/service engineer from LG Electronics may disassemble, repair or modify the product.

•Do not attempt to disassemble or repair the product yourself as it may result in electric shock, injury or fire.

Never use the battery, the charging station and the adaptor with other appliances other than this product.

•It may cause a product malfunction or fire.

Do not use the battery of another appliance in the product.

•It may cause malfunctioning or fire.

Do not arbitrarily disassemble, remove or short-circuit the battery.

•It may result in electric shock, injury or fire.

Do not apply heat or shock to the battery.

•It may cause electric shock, injury or fire.

Never insert a sharp metallic object such as a pin, nail or knife in a hole or gap in the product or the charging station.

•Otherwise, you may get injured or suffer electric shock.

Do not vacuum liquids with this product. Make sure that no water, beverage or detergent gets inside the product or the charging station.

•Failure to do so may result in injury or electric shock.

Do not apply or spray a flammable substance (gasoline or thinner) or surface active agent (detergent or bath soap) on the product.

•It may result in malfunction or fire.

In the event of a gas leakage (propane or urban gas), make sure to ventilate the area first without coming into contact with the product or its power plug.

•Otherwise, there may be sparks which may result in an explosion, fire or injury.

Do not use or store a heating device or flammable substance(ether, benzene, alcohol, chemicals, combustible spray, insecticide, air freshener or cosmetics) in close proximity to the product.

•It may result in product malfunction or fire.

Do not attempt to clean up a liquid substance (water, beverage), odorous substances (candy, chocolate, pet excrement, etc.), metallic objects (such as blade, pins), flammable substances, surface active agents, or glass shards with this product.

•It may result in product malfunction or fire.

•In the event that any liquid, metallic object, glass shard or spark gets inside the product, immediately turn off the product and contact the customer service department of LG Electronics.

Do not use the product with the exhaust or inlet port blocked.

•It will cause the product to overheat and result in malfunction or fire.

In the event that smoke is emitted by the product while it is charging, immediately unplug the power cord and contact the customer service department of LG Electronics.

•Failure to do so may cause electric shock or fire.

Page 9

Do not expose the product, and the battery in particular, to heat, a heating device or direct sunlight.

•It may result in electric shock, explosion or fire.

Do not keep the product or its battery inside a vehicle which is exposed to direct sunlight.

•It may cause fire or explosion.

In the event that some kind of liquid leaks from the battery, make sure that it does not contact the skin or eyes.

•It may burn the skin or severely damage the eyes.

•If liquid from the battery comes into contact with part of the skin, immediately wash it off with plenty of water and seek medical advice.

Do not wash the inlet port with water or detergent.

•As the inlet port contains a motor, it may result in electric shock or fire.

Always use the charging station and adaptor provided with the product to charge the product and its battery.

•Using any charging device other than the provided station and adaptor will damage the battery and result in electric shock, explosion or fire.

Never allow any water, beverage or detergent to get inside the battery.

•It may cause electric shock, explosion or fire.

Do not touch the charging terminals on the product or the charging station, or insert an electrified object inside the product or the station.

•Otherwise, you may get injured or suffer electric shock.

Always leave the product on the floor standing or wall-mount charging station when it is not in use. Do not leave the product on the charging station not fixed to the wall or charging station support.

•Otherwise, the product may fall and get damaged or cause injury.

In the event that the earth leakage breaker gets activated while the product is placed on the charging station, immediately remove the product from the station and contact the customer service department of LG Electronics.

•Failure to do so may cause electric shock or fire.

Do not wash the dust bin with water.

•The water will get into the motor and cause electric shock or fire.

Do not attempt to vacuum fine dust such as cement with the product.

•It may cause product malfunction or fire.

Make sure that no child can play with the product, charging station or battery.

•It may damage the product and cause an injury.

•If a child places the product or battery into its mouth, it will cause electric shock or injury, or damage the product or battery.

When using the product, remove any wire or string from the bottom of the Charging Station.

•Straps or wires may wrap around the product and cause a product malfunction or a broken cord.

Disposal

Discard the packing materials (plastic vinyl, styrofoam) properly so that no child comes into contact with them.

•Such materials may cause a child to suffocate.

When disposing of the product, make sure to remove the battery from the product's body.

•Failure to do so may result in fire or explosion.

Page 10

CAUTION

Proper usage

Do not apply impact to the product or drop it from a height.

•It may damage the product and/or result in injury.

Make sure that the product does not fall.

•It may cause injury or damage the product.

Make sure that the filter is installed in the product prior to each use.

•Failure to install a filter may result in product malfunction.

Make sure to wipe up any liquid such as water or oil or pet excrement from the floor before using the product.

•Such substances will cause the unit to malfunction or cause irreparable damage

Do not clean the product with a volatile or organic solvent (thinner or acetone).

•It may damage the product.

•Always use a soft cloth to clean the product.

Make sure to avoid running into a person or a pet while using the product.

•It may cause injury.

Do not kick or apply impact to the product.

•It may cause the product to malfunction.

Do not put any object other than the product, especially a metallic or magnetic object, on the charging station.

•It may damage the product or cause electric shock.

Do not clean the same spot repeatedly for an extended period of time.

•Vibration from the inlet port or rotating brush may damage the floor or the carpet.

Make sure that your finger does not get stuck when assembling the product or the charging station.

•It may injure your finger.

Do not let a child or a pet hang onto the charging station.

•It may cause injury or damage the product.

Do not put double-sided tape directly onto the wallpaper as it may be torn by external force.

•Anchor the charging station with the wall anchoring screw(s) to prevent tearing of the wallpaper.

Do not apply force or impact to the filter parts or dust bin parts.

•The parts may become deformed, compromise the performance or cause the unit to malfunction.

Page 11

PACKAGE INFORMATION

Standing type Wall-mount type

Product body

Extension pipe

Power Drive Carpet Nozzle

Charging station

Charging station pipe

Combination tool and crevice tool holder

Accessories

Parts and accessories may vary depending on the model that you have purchased.

•

Product body Extension pipe Power Drive Carpet

Nozzle

Charging station Adaptor

1 4

Charging station support

Adaptor

Battery

Battery Crevice Tool Combination Tool Wall Anchoring Block Double-sided tape (2)

Screw Anchor (2) Anchoring screw for

Please note that these parts come with their corresponding models only.

•

Battery Power Drive Floor

wall-mount type (Φ

3.5 mm, length 50 mm)(2)

Nozzle

Anchoring screw for

standing type (Φ 3.5

mm, length 90 mm)

Bedding Power Punch Charging station pipe Charging station

Pre-filter

support

Page 12

INSTALLATION

Installing the floor standing charging station

Put the bottom of the charging station onto the

floor and assemble the pipe first, followed by the upper body mount.

CAUTION

Avoid getting your fingers stuck in any gap.

•

Connect the power adapter to the port on the back

of the charging station and plug the power cord into the power outlet.

The cord can be secured tidily by putting it

•

through the power cord anchoring ring located on the back of the charging station pipe.

②

Put the anchoring block on the back of the charging

station and anchor the charging station with the screw.

Make sure to fully tighten the screw.

•

Wall anchoring block

Anchoring screw for standing type

Screw

anchor

When using double-sided tape (do not use if the wall is wallpapered)

Use double-sided tape to attach the wall anchoring

block to the charging station in step 4.

Be sure to remove the center part of the double-

•

sided tape before mounting it.

Wall anchoring block

①

After ensuring there are no pipes or wires insider

behind the wall, make a hole at the appropriate height to anchor the charging station and insert the screw anchor.

Recommended diameter of hole: Φ6.5;

•

Recommended depth: 50~100 mm.

Screw anchor

Use the remaining part of the tape to anchor the

station to the wall before inserting the screw.

Page 13

CAUTION

Avoid dropping the product and parts when taking them

•

out of the package. It may damage the product and/or cause personal injury.

Do not use double-sided tape to anchor the charging

•

station on papered walls. Please use the provided screws as otherwise the wall paper will get torn by movement of the charging station during the docking of the unit.

We recommend anchoring the station with the

•

anchoring screw. Use the anchoring screws only when the wall is made

•

of concrete or is solid enough. An unsuitable wall can cause the mountings to weaken and cause the Charging station to fall causing injury and damage the property or product.

Please note

The charging station, its pipe and support cannot

•

be disassembled separately once they have been assembled, and the charging station has been attached to the wall.

The charging station can be removed as needed. After

•

unscrewing it from the wall, pull the station upward whilst the bottom of the station remains upright on the floor.

Installing the wall-mount station

Connect the power adapter to the port on the back

of the charging station and plug the power cord into the power outlet.

Make a hole 1 meter from the floor to insert the

wall plug or screw anchor.

Recommended diameter of hole: Φ6.5;

•

Recommended depth: 60 mm.

Anchor the station to the wall with the provided

anchoring screws.

Wall anchoring

hole

Anchoring

screw for wall-

mount type

Screw anchor

Uninstalling the station

Keep and charge the product on the charging station after separating extension pipe and nozzle from the product body.

CAUTION

Leaving the extension pipe and nozzle assembled for a

•

long time may cause damage the product.

Storage of the combination tool and crevice tool

Keep the combination tool and crevice tool on the charging station for easy access.

Attach the combination tool and crevice tool to the

dedicated holders.

Press and hold the inlet removal button and pull

downward to remove the combination tool or crevice tool.

Please note

A service request to change the installation location

•

of the charging station will incur additional costs if required to do so by a qualified installer.

Page 14

HOW TO USE

Note about using the product

Points to be aware of when using the product

Make sure that the dustbin lid is on prior to using

•

the product. Otherwise, the suction strength will deteriorate and cleaning will not be satisfactory.

Support the bottom of the product when cleaning an

•

elevated surface. When leaving the product unattended or unused for

•

an extended period, make sure to place it properly on the charging station or lie it on the floor. Otherwise, the product may fall and get damaged or cause an injury.

Make sure that the exhaust filter is properly

•

assembled before using the product. Environmental conditions such as temperature

•

and humidity may cause static to accumulate on the product. Please contact the customer service department of LG Electronics if the problem persists.

Any foreign object on the inlet port or extension pipe

•

will prevent the product from functioning properly. Make sure to remove any foreign object such as a sock or stocking before using the product.

The battery runtime will be shortened after using the

•

product repeatedly for an extended period due to its characteristics.

When the battery is about to become fully run down

•

during use, the last block on the battery indicator will start to flash and the product will power off after a while. Fully charge the battery in this case.

Please use the product at normal room temperatures

•

as the battery runtime will deteriorate severely if used at temperatures lower than 5℃ or higher than 38℃ for an extended period of time.

Refer to Product specifications for battery run time

•

details. These times are a guide only and may be less

•

depending on the surface type.

Using the Product

Assemble the body, extension pipe, inlet port, and

battery in that order.

Product

Inlet port

Extension pipe

Press the button on the extension pipe to adjust its

length.

The pipe has 4 extendable length positions

•

Pipe length extension button

Attach the accessory tool to the body or the

extension pipe.

CAUTION

Prolonged use of the product with the accessory tool

•

attached may overburden the motor. Using the inlet port to clean a TV, monitor or LCD

•

display may scratch the screen. Exercise caution to avoid getting your finger stuck in

•

any gap when assembling the attachments. If any foreign object is sucked into the inlet during

•

cleaning, operation of the vacuum cleaner might stop in order to prevent damage to the body or motor. Immediately stop using the vacuum cleaner and remove the object before resuming cleaning.

body

Battery

Extension pipe

Page 15

Charging the Product

Put the product on the charging station.

The battery indicator will start to flash and

•

charging will proceed in 3 steps.

The battery indicator starts to flash and charging

will start.

All of the indicators will stay on when the battery

•

is fully charged.

Insert the battery into the auxiliary charging

station.

Charging indicator of the auxiliary battery

Please note

Make sure that the power adapter is connected to

•

both the charging station and the power outlet If the main battery is charging on the charging station,

•

the auxiliary battery will only start charging once the main battery is fully charged.

The auxiliary battery indicator flashes when charging

•

starts. The indicator will stay on when the auxiliary battery is

•

fully charged. Fully charging a single battery usually takes 4 hours,

•

but it will take twice as long if you charge it along with a discharged auxiliary battery.

CAUTION

Make sure to securely fit the unit on to the charging

•

station. Otherwise, the product may fall and get damaged.

Please note

The battery will not be charged if the ambient

•

temperature is below 5°C. only charge the battery when ambient temperatures are between 5° and 38° C.

The battery indicator will flash if the product is fully

•

charged, removed from the station, and charged again soon. The flashing stops soon, and the indicator stays on.

Charging the auxiliary battery

Hold the product and pull the battery by pressing

both ends of the battery.

Power / Suction Strength button

You can adjust the suction strength with the suction strength button located on the handle.

Power On/Off button

Press the power On/Off button to activate the

•

Normal mode.

Mode button

Press "+" once to activate the Power mode.

•

Press and hold "+" for more than 3 seconds to

•

activate the Turbo mode. The unit will take a moment to switch to the

•

Turbo mode from the Normal mode when the "+" button is held down. Press "-" to switch from Turbo to Power, or from

•

Power to Normal.

Page 16

Using the nozzles

Please note that the following applies to the

•

corresponding models: The nozzle can be attached to the product body or

•

extension pipe. Use a different mode if the inlet gets stuck on the

•

floor, carpet or bed sheets or if you need a more powerful mode.

Crevice Tool

It is suitable for cleaning dust in a corner or a narrow space.

Combination Tool

This accessory is helpful for cleaning corners or small gaps.

CAUTION

Do not use the product for any purpose other than

•

domestic household.

Power Drive Carpet Nozzle

It is suitable for cleaning carpets or rugs.

•

It can be used to clean hard floors but will generate

•

some noise.

CAUTION

Do not use this nozzle on a play mat (PVC) for children.

•

Power Drive Floor Nozzle (some models only)

It is suitable for cleaning hard floor surfaces.

•

Bedding Power Punch (some models only)

Bedding Power Punch lets you clean bed sheets and

•

covers more effectively. This attachment can be used to remove Pet Hair from various surfaces without hair tangling.

Make sure to adjust the suction level to an appropriate

•

setting when you vacuum-clean a blanket with a thin outer fabric as the cleaner may attempt to suck the outer fabric.

Basic

For cleaning flat surfaces such as a sofa or mattress.

Brush type

For cleaning delicate surfaces such as a frame or furniture.

Button

CAUTION

Prolonged use of the product with an accessory tool

•

attached may over heat the motor. Using this accessory tool on a TV, monitor or LCD

•

display may scratch the screen. Avoid getting your finger stuck in any gaps when

•

fitting the accessory tools. If any foreign object is sucked into the inlet during

•

cleaning, operation of the unit might stop in order to prevent damage to the body, motor or inlet. Immediately stop using the vacuum cleaner and remove the object before resuming cleaning.

Page 17

MAINTENANCE

Cleaning the the Dustbin

Remove the battery from the unit before cleaning

the dustbin.

Please empty the dustbin next to a wastebasket

or where dust and foreign objects can be emptied easily.

Press the dustbin button downward to open it.

Empty the bin.

•

Be careful as dust/foreign matter may spill out

•

when you open the dustbin.

Dustbin Button

Insert the crevice tool into the large dust

separation device (Cyclonic Mesh Filter) and turn it counterclockwise to remove it. Use the suction end of the crevice tool to do this with ease.

Remove the Cyclone and use the combination tool

to clean out the dust inside the dustbin.

Combination Tool

WARNING

Never wash the product's body with water. Water may

•

reach the motor and cause electric shock or fire. Do not apply force or any impact to the dust bin parts

•

or the Cyclone as it may damage them. Use the product only after cleaning the Cyclone and

•

reassembling it on the product. Failure to do so will damage the product.

Cleaning the Filters

The Pre-filter and exhaust filter need to be cleaned at least once a month to maintain the cleaning performance of the product.

Turn the exhaust filter counterclockwise to remove

it and take out the pre-filter.

Wash the large dust separation device (Cyclonic

Mesh Filter) with running water.

Be sure to dry the device completely before

•

reinserting it.

Large dust separation

device

(Cyclonic

Mesh

Filter)

Exhaust filter

With the unit upside down, use the combination

tool to clear dust from the motor part once the Dust separator filter has been removed.

Combination Tool

Pre-Filter (Yellow/ Green cloth type)

Page 18

Clean the exhaust filter by brushing the dust off or

by washing it in running water.

To maintain cleaning performance, remove the

•

dust from the exhaust filter at least once a month.

WARNING

Never wash the product's body with water as it may

•

reach the motor and result in electric shock or fire. Make sure that no foreign object reaches the motor as

•

it will damage the product and may result in explosion or fire.

Do not insert a finger or a sharp object near the motor

•

as it will damage the product and may result in injury or electric shock.

Wash the exhaust filter in running water if it

•

emits an odor. The exhaust filter may emit an odor if it is not

•

dried completely after it has been cleaned in water. Make sure to dry it completely for 24Hrs before refitting it.

Clean the pre-filter by brushing the dust off or by

washing it in running water.

When washing the cloth type Pre-filter with

•

water, it must be completely dry before reinserting. Failing to do so will cause it to emit odours.

The more often the filters are cleaned, the more

•

optimal the suction power will be. Filters are consumables and will wear with time

•

and use. Please purchase more filters from an authorized service center.

CAUTION

Make sure to reattach the exhaust filter and Pre-filter

•

to the product after washing them. Using the product without these filters will allow dust to reach the motor inside the product and cause malfunction.

Please note

As too much dust will reduce the suction power, we

•

recommend cleaning the filters before and after using the product.

※

Removing foreign objects from inside the

product

In order to maintain product performance, be sure to remove any foreign objects and dust from inside the product (body, extension pipe, inlets). The foreign materials inside the product can cause the product to shutdown during operation, generate noise, or cause poor suction.

Foreign objects

Product body

Extension pipe

Foreign objects

To refit the filters, attach the Pre-filter first,

followed by the exhaust filter, so as to align the white circle near the battery level indicator and then turn it clockwise so that the white circles align with each other.

Foreign objects

Inlet port

※

If the inside of the product body, Extension pipe, or

Inlet port is clogged with foreign objects, the power automatically turns off to protect the product. Separate the battery from the product and remove the foreign objects.

Page 19

Cleaning the Power Drive Floor/ Carpet Nozzle

Please clean the floor and carpet nozzles as follows:

Remove the nozzle from the product.

Turn the nozzle upside down and turn the rotating

brush removal screw counterclockwise.

Use a coin or a flat head screwdriver to turn the

•

screw.

Rotating the brush removal screw

Pull the brush in the direction of the arrow to

remove it.

①

②

Attach the crevice tool to the unit and use the

vacuum to remove dust/foreign objects from the brush and the bottom of the nozzle.

Rotating

brush

CAUTION

Avoid getting your finger stuck in any gaps when

•

reassembling. Do not wash the rotating brush and the nozzle with

•

water. Do not use the rotating brush as a mop.

•

Do not use the nozzle to absorb any liquid.

•

Cleaning the Bedding Power Punch

Remove the Bedding Power Punch and turn it

upside down.

Attach the crevice tool to the unit and use the

vacuum to remove dust/foreign objects from the bottom of the Bedding Power Punch.

Use a wet towel or tissue to move any remaining

foreign matter and dust.

Use a wet towel or tissue to remove any remaining

foreign matter and dust from the brush and the bottom of the nozzle.

Rotating

brush

Assemble the brush in reverse order after cleaning.

②

①

WARNING

Do not wash the Bedding Power Punch with water.

•

Do not suck any liquids including water into the

•

Bedding Power Punch.

Page 20

POINTS TO CHECK BEFORE CONTACTING CUSTOMER SERVICE.

Please check once again if one of the following symptoms is present while using the product. The product may not be malfunctioning.

Symptom Cause Solution

Charge the battery.

The product does not operate.

Suction is too weak.

The unit does not appear to be charging.

Hot air is expelled from the unit.

A strange odor is coming from the product.

The cleaner makes too much noise.

The unit powers off too soon.

The rotating brush does not rotate.

Is the battery fully discharged? Is the product powered off? Is the dustbin full of dust?

Is the filter clogged?

Is the inlet clogged? Is there a foreign object on the

rotating brush of the inlet port? Is the power adapter connected

to the charging station? Is the power cord plugged into

the outlet? Is there any foreign object on the

charging terminals?

Is it operating properly?

Did you purchase the cleaner within the last 3 months?

Is it operating properly?

Is the dustbin full of dust?

Are there any foreign objects in the filter?

Is the Pre-filter wet?

Is the exhaust filter wet?

Is it operating properly?

Is the battery fully charged?

Is there any foreign substance in the body of the product, Extension pipe, or Inlet port?

Is the brush properly attached?

Are there any foreign objects on the rotating brush?

•

Press the power button to power on the product.

•

Empty the dustbin.

•

Clean the pre-filter. If suction is still weak

•

after cleaning the pre-filter, please contact the customer service department for advise

Make sure to remove any foreign objects (thread,

•

hair) from the rotating brush. Make sure that the adapter is properly plugged

•

into the charging station. Make sure that the power cord is properly

•

plugged into the power outlet. Remove any foreign objects from the charging

•

terminals with a dry cloth. The hot air originates from cooling of the motor

•

and is not a sign of malfunction. The cleaner may emit a smell of rubber for about

•

3 months after purchase. If the cleaner is working fine, it is not malfunctioning.

•

Also, dust in the bin may cause some odor. Empty

•

the bin and clean it. The filter may emit an odor if it has not been

•

cleaned for some time. Clean both the pre-filter and the exhaust filter.

Washing the pre-filter with water and not leaving

•

it long enough to dry completely may cause it to smell. Make sure to dry it completely before reassembling it on the cleaner.

Washing the exhaust filter with water and not

•

leaving it long enough to dry completely may cause it to smell. Make sure to dry it completely before reassembling it on the cleaner.

Different levels of noise is normal during

•

operation due to three power settings. It is not a sign of malfunction.

The battery must be fully charged before cleaning.

•

If the problem persists even though the battery is fully charged, and the pipes and attachments are clear from obstructions, then please contact LG customer service

Remove the foreign objects from the body of the

•

product, Extension pipe, or Inlet port.

Remove the brush, clean it if necessary and

•

attach it again. Remove any foreign objects from the rotating

•

brush.

Page 21

DISPOSAL INFORMATION

Disposal of old products not related with the purchase of a new product

You must contact your local city council or the related government authority before disposing of large appliances.

PRODUCT SPECIFICATIONS

Item/Model A9*********

Dimensions

Weight 2.7 kg

Power consumption:

Suction power 140 W (In Turbo mode)

Battery DC 25.55 V

Battery runtime (When fully charged, and without using the Power Drive nozzles)

Battery runtime (When fully charged, and using the Power Drive nozzles)

260 mm(W) X 270 mm(L) X 1120 mm(H)

400 W (Maximum power: 450 W)/ 250 W/ 80 W (Turbo/Power/ Normal)

Approx. 6 minutes in Turbo

Approx. 9 minutes in Power

Approx. 40 minutes in Normal

Approx. 6 minutes in Turbo

Approx. 9 minutes in Power

Approx. 30 minutes in Normal

Item Charger (Adaptor)

Input 100 V - 240 V~ 50/60 Hz, 0.8 A

Output DC 29.4 V 1.0 A

Item/Model Battery

Type Rechargeable Li-ion Battery

Rated DC 25.55 V , 2000 mAh, 7 cells

1) Suction Power test based on IEC 62885-2, 5.8.

Page 22

Note

Page 23

Note

Page 24

Note

Page 25