
BEFORE SERVICING THE UNIT, READ THE “SAFETY PRECAUTIONS” IN THIS MANUAL
MOBILE PHONE
SERVICE MANUAL
CAUTION
MODEL : LG-K430DSF

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
1.
INTRODUCTION ............................................... 3
1.1 Purpose
1.2 Regulatory Information
6. BGA PIN MAP............................................................
7. PCB LAYOUT…...........................................................
2.
PERFORMANCE. ................................................. 4
2.1 Band Specification
2.2 HW Features
2.3 RSSI Display
2.4 Current consumption
8. HIDDEN MENU..........................................................
9. DOWNLOAD…...........................................................
10. CALIBRATION..........................................................
2.5 Battery bar
2.6 SW Specification
11. DISASSEMBLE GUIDE.............................................
3.
TROUBLE SHOOTING. ........................................ 13
3.2 Transceiver DC Power Supply Circuit Block
3.3 DC-DC Block
12. EXPLODED VIEW……………………………………….
13. REPLACEMENT PART LIST..………………………...
3.4 FEMiD(Front End Module integrated Duplexer) Block
3.5 GSM RF PART
3.6 WCDMA RF PART
3.7 LTE RF PART
3.8 Checking Wifi/BT Block
3.9 Checking GPS Block
3.10 Checking FM Block
3.11 Checking NFC Block
3.12 Power
3.13 charger
3.14 Audio
3.15 Checking LCD Block
3.16 Touch
3.17 Sensor
3.18 Checking USB Block
3.19 Camera
4. BLOCK DIAGRAM….............................................. 92
5.
CIRCUIT DIAGRAM............................................... 8:

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
1.1 Purpose
This manual provides the information necessary to repair, calibration, description and download the features of this model.
1.2 Regulatory Information
A. Security
This material is prohibited to share and release to unauthorized person, in accordance with the regulations, LG Electronics, Civil / criminal
responsibility in accordance with the relevant provisions violate.
B. Precautions for repair
•
In case of Disassembly or Assembly to repair product, be careful of a product failure caused by RF signals and Static electricity.
•
When using Magnetic tool for the Phone's SVC repair, you should check affect the Electric parts according to effect of Magnet.
•
When fastening the screw, be careful not to damage the head of screw and even product.
C. Attention
Boards, which contain Electrostatic Sensitive Device (ESD), are indicated by the sign.
Following information is ESD handling:
•
Service personal should ground themselves by using a wrist, strap when exchange system board.
•
When repair are made to a system board, they should spread the floor with anti-static mat which is also grounded.
•
Use a suitable, grounded soldering iron.
•
Keep sensitive parts in these protective packages until these are used.
•
When returning system board or parts like EEPROM to the Factory, use the protective package as described.

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
2.1 Band Specification

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
16GB(EMMC) + 1.5GMB(LPDDR2)
Active matrix TFT, Transmissive Type

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
0 m ~ 10 m (depend on environment)
Max 40Mbps (SDIO Driver performance)
0 ~ 50m (depend on environment)

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
1. Call Connecte
d & CPIPH Level
=-3.3
2. LTE: RSRP
1. Call Connecte
d & CPIPH Level
=-3.3
2.3 RSSI Display

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
DRX 7 @ BATT Capacity : 2300mAh
EGSM P5 @ BATT Capacity : 2300mAh
DRX 2.56 @ BATT Capacity :2300mAh (AMR Mode)
10dBm @ BATT Capacity :2300mAh (AMR Mode)
EGSM, LV5 @ BATT Capacity : 2300mAh
Cat2 Tx 10dBm @ BATT Capacity : 2300mAh
2.4 Current consumption
-. Battery Spec. : 2,300mAh(Typ.)/3.8V/Li-Ion

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
2.5 Battery bar

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
depending on build language
Phone / Messaging / Browser/ Appli
cations
Phone / Contact / Messaging /
Applications
Voice mail center -> 1 key
not same with feature phone s
etting
Name / Number / Email / Groups /
Postal addresses / Organizations / I
M / Note / Nickname / Website / Ev
ent /
There is no limitation on the n
umber of items.
It depends on available memor
y amount.
There is no limitation on the n
umber of items.
It depends on available memor
y amount.
My Profile (add/edit/delete are
supported)

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
There is no limitation on the number of items
.
It depends on available memory amount.
EMS Melody / Picture
Send / Receive / Save
MMS MPEG4
Send / Receive / Save
Send / Receive : Yes
Save : depends on content type
Support video content type li
st
1.
video/mp4
2.
video/h263
3.
video/3gpp2
video/3gpp
The standard of Open vender
There is no limitation on the number o
f items.
It depends on available memory amo
unt.

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
Support only web browser bas
ed on webkit. WAP stack and
wml are not supported.
Download Melody /
Wallpaper
13MP AF / 5MP
Digital Zoom : x4
Ver. 4.2LE [HSP, HFP, A2DP, AVR
CP, PBAP, OPP, MAP, HID, PAN,
HOGP, HDP, DID]

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
XO Circuit is OK.
Check next step
NO
Replace X5001 and then
check TP1
XO Circuit is OK.
Check next step
NO
The Problem may be
Logic part
Refer to Logic trouble shoot
3.1 Checking XO Block
The out put frequency(26MHz) of VTCXO(X5001) is used as the reference one of MT6169
Image
Checking Flow
Circuit Diagram

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
Check TP1
+2.8V_RF is OK?
The Problem may be
Logic part
NO
Refer to
Logic trouble shoot
YES
Check TP2
The Problem may be
+1.8V_RF is OK?
NO
Logic part
Refer to
Logic trouble shoot
YES
Check next step
3.2 Checking Transceiver DC Power Supply Circuit Block
The MT6169 operating voltages used two voltage sources 1.8V and 2.8V
Checking Flow
Circuit Diagram
Image
TP1

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
The Problem may be
Logic part
Refer to Logic trouble
shoot
Check TP2
0.5V ≤ TP2 ≤ 4.2V ?
Check U4100 Physical
NO
Damage or soldering
condition
YES
3.3 Checking DC-DC Block
The DC-DC(MT6328, U4100) output voltages is used as the reference one of SKY77643-31
Checking Flow
Image

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
Check TP1, TP2 High Level ?
(2.5V≤TP1 ≤3.1V)
(3.9V≤TP2 ≤4.2V)
The Problem may be
Logic part
Refer to Logic trouble
shoot
Check U1002 physical Damage
or soldering condition
3.4 ASM(Antenna Switch Module) Block
3.4.1 Checking ANT #1 ASM (GSM 850/900, W B5/8, LTE B7/20)
Checking Flow
Image
Circuit Diagram

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
Check TP1, TP2 High Level ?
(2.5V≤TP1 ≤3.1V)
(1.7V≤TP2 ≤1.9V)
The Problem may be
Logic part
Refer to Logic trouble
shoot
Check U1001 physical Damage
or soldering condition
3.4 ASM(Antenna Switch Module) Block
3.4.2 Checking ANT #2 ASM (GSM 1800/1900, W B1 B2, LTE B3)
Image
Checking Flow
Circuit Diagram

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
GSM RF Part support GSM850/900/1800/1900 with ASM, PAM, Transceiver component
START
Check XO Block
Refer 3.1
Check Transceiver DC Power supply Block
Refer 3.2
Check DC-DC Block
Refer 3.3
Check ASM Block
Refer 3.4
Check T/RX Block
Re-Download & Cal
Change the Board

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
1. GSM850 RX PATH
2. GSM900 RX PATH
3. GSM1800 RX PATH
4. GSM1900 RX PATH
3.5 GSM RF PART
3.5.1 GSM RF Part RX RF PATH
Image

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
Check
SW1002
NO
Soldering
3.5 GSM RF PART
3.5.2 Checking RF Signal RX path(SW, GSM850/900)
Checking Flow
Main
Top
TP1 TP2
Circuit Diagram
Image
TP1

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
Check TP1/2 Signal exist?
Check TP3/4 Signal exist?
Check
Component
above RF signal
path
Check Transceiver
physical damage
or soldering condition
3.5 GSM RF PART
3.5.3 Checking RF Signal RX path(GSM850/900)
Checking Flow Image
TP2
TP1
Circuit Diagram
TP4
TP3
TP4

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
3.5 GSM RF PART
3.5.4 Checking RF Signal RX path(SW, GSM1800/1900)
Checking Flow
START
Check TP1 Signal exist?
YES
Check TP2 Signal exist?
YES
Check
SW1100
NO
Soldering
NO
Check
U1001
Soldering
Check next step
TP1
Image
Main
Top
U1001
TP2
TP1
Circuit Diagram
TP2

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
Check TP1/2 Signal exist?
Check TP3/4 Signal exist?
Check Component
above RF signal
path
Check Transceiver
physical damage
or soldering condition
3.5 GSM RF PART
3.5.5 Checking RF Signal RX path(GSM1800/1900)
Checking Flow
Image
TP2
Circuit Diagram
TP3

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
1. GSM850 TX PATH
2. GSM900 TX PATH
3. GSM1800 TX PATH
4. GSM1900 TX PATH
3.5 GSM RF PART
3.5.6 GSM RF Part TX RF PATH

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
The Problem may be
Other part
Check Logic part
Check DC-DC Power
Block
Refer to 1.8V
3.5 GSM RF PART
3.5.7 Checking GSM PAM DC Power Circuit
Checking Flow
Circuit Diagram
Image

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
3.5 GSM RF PART
3.5.8 Checking RF Signal TX path(SW, GSM850/900)
Checking Flow
TP1
Image
Circuit Diagram
TP1

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
Check TP1/2
If GSM850/900 Over 9dBm?
Check Transceiver
physical damage
or soldering condition
3.5 GSM RF PART
3.5.9 Checking RF Signal TX path(GSM850/900)
Checking Flow
Image
Circuit Diagram

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
3.5 GSM RF PART
3.5.10 Checking RF Signal TX path(GSM1800/1900)
Checking Flow Image
If GSM1800/1900 Over
START
NO
Check TP1/2
9dBm?
NO
YES
Replace U1100
Check Transceiver
physical damage
or soldering condition
OK?
Check next step
NOT GOOD
Replace U1500
Main
Top
TP2
TP1
U1100
TP1
Circuit Diagram
TP1
TP2
TP2

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
WCDMA RF Part support WCDMA B1/2/5/8 with ASM, PAM, Transceiver component
START
Check XO Block
Refer 3.1
Check Transceiver DC Power supply Block
Refer 3.2
Check DC-DC Block
Refer 3.3
Check ASM Block
Refer 3.4
Check T/RX Block
Re-Download & Cal
Change the Board

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
http://eduwebcell.blogspot.com/
1. WCDMA B5 RX PATH
2. WCDMA B8 RX PATH
3. WCDMA B1 RX PATH
4. WCDMA B2 RX PATH
3.6 WCDMA RF PART
3.6.1 WCDMA RF Part RX RF PATH
Image