LG 9QK MB0502C0 User Manual

1. Introduction

MB0502C0 is a fully integrated Bluetooth module. It is based on
CSR’s Bluecore5-Multimedia External with specific interface design
to meet LG Electronics’s needs.
MB0502C0 is compatible with Bluetooth specification version 2.0. It
integrates RF, Baseband, controller, etc., a completed Bluetooth
subsystem. MB0502C0 supports A2DP Sink/Source,
AVRCP Target profiles. It provides a UART interface, analog audio
line input, SPDIF audio output and 2 functional I/O.
MB0502C0 can control by UART. Please refer to MB0502C0
software user guide for the interfacing protocol.

2. General Features

2.1 Module Features

- Operation Range (Class II) : 10 meters

- Operating Temperature Range : -10 ℃ ~ 80℃

- Operating VDD Range : 2.7V ~ 3.6V

- Output Power : 0dBm

- Interfaces : UART, Analog Audio Line-in, SPDIF Audio Out,
Functional I/O

- Internal Antenna

- Compatible with Bluetooth Specification 2.0

- 64MIPS Kalimba DSP Co-Processor

- 16-bit Internal Stereo CODEC

- RoHS Compliant

2.2 Firmware Features

- Bluetooth Stack : UnifiedStack 2.0

- Host Interface : UART

MCSLOGIC
Product Approval Datasheet V1.20 5/23
Copyright © 2009 MCS LOGIC Limited. All rights reserved

Confidential

- Support Profile : A2DP (Sink/Source), AVRCP Target

- Profile version : A2DP V1.0, AVRCP V1.0

- DUT(Device Under Test) Mode Support

- DFU(Device Firmware Upgrade) Support

3.Packing Information

3.1 Tray

 Each tray has 30 units of products.
 7 trays per AL bag.
 Attach a MSL level label on the AL bag