LG 9QK LCF810 User Manual

OWNER’S MANUAL

CAR CD/MP3/WMA Receiver

Please read this manual carefully before operating your set and retain it for future reference.

LCS710BR / LCS710DAB /

LCF810BR / LCF810DAB

SLOVENŠČINA NEDERLANDS ITALIANO ESPAÑOL FRANÇAIS DEUTSCH ENGLISH

P/NO : MFL63287368

1 GettingStarted

2Getting Started

Safety Information						To reduce the risk of electric
						shock, do not remove the cover
						or back of this product. There are
	CAUTION					no user-serviceable parts inside.
						Refer servicing to qualified service
	RISK OF ELECTRIC SHOCK
						personnel.
	DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC						To reduce the risk of fire or electric
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING						shock, do not expose this product
TO QUALIFIED SERVICE PERSONNEL.						to dripping or splashing water, rain,
						or moisture.
	This lightning flash with arrowhead
	symbol within an equilateral					The temperature of unit’s outside
	triangle is intended to alert the
						can be extremely high, please use
	user to the presence of uninsulated
						the unit after proper installation in
	dangerous voltage within the
						your vehicle.
	product’s enclosure that may be of
	sufficient magnitude to constitute
	a risk of electric shock to persons.					This unit cannot play 8 cm disc (use
	The exclamation point within an					12 cm disc only).
	equilateral triangle is intended
	to alert the user to the presence
	of important operating and					While driving, keep the sound
	maintenance (servicing)
						volume at a proper level.
	instructions in the literature
	accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN						Do not drop it and avoid heavy
OR MOISTURE.
						impacts at anytime.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a

safe and legal manner before attempting such operations.

Do not use for many hours at extremely low or high temperature. (-10 °C to 60 °C)

This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, lorry or bus, check the battery voltage. To avoid shorts in the electrical

system, be sure to disconnect the E battery cable before beginning the installation.

					Getting Started		3
CAUTION: This product employs a Laser System.			Disposal of your old appliance
To ensure proper use of this product, please read					1. When this crossed-out wheeled bin
this owner’s manual carefully and retain it for future
					symbol is attached to a product it
reference. Shall the unit require maintenance,
					means the product is covered by the
contact an authorized service centre.
					European Directive 2002/96/EC.
Use of controls, adjustments or the performance of					2. All electrical and electronic products
procedures other than those specified herein may
					shall be disposed of separately
result in hazardous radiation exposure.
					from the municipal waste stream
To prevent direct exposure to laser beam, do not try					via designated collection facilities
to open the enclosure. Visible laser radiation when					appointed by the government or the
open. DO NOT STARE INTO BEAM.					local authorities.
					3. The correct disposal of your old
					appliance will help prevent potential
					negative consequences for the
“This device is equipped with a portable battery or					environment and human health.
					4. For more detailed information about
accumulator.					disposal of your old appliance, please
Safe way to remove the battery or the battery					contact your city office, waste disposal
from the equipment:					service or the shop where you
Remove the old battery or battery pack, follow the					purchased the product.
steps in reverse order than the assembly. To prevent
contamination of the environment and bring on					LG Electronics hereby declares that this/
possible threat to human and animal health, the					these product(s) is/are in compliance
old battery or the battery put it in the appropriate
					with the essential requirements and
container at designated collection points. Do					other relevant provisions of Directive
not dispose of batteries or battery together with					2006/95/EC and ECE Regulation 10.03
other waste. It is recommended that you use			(3.2.9).
local, free reimbursement systems batteries and					European representative :
accumulators.”
					LG Electronics Service Europe B.V.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.					Veluwezoom 15, 1327 AE Almere, The
					Netherlands

You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.

(Mastered/Live File System : Disc format system for Windows Vista)

(Tel : [phone])

The unit is compatible with the steering wheel remote control. The function allows operation by sending the steering wheel remote control signal to the unit.

For details, consult with your dealer.

> Caution

When being connected in a wrong way, the unit displays as follows.

- Antenna port short : "EXTERNAL ON PORT SHORT CIRCUIT CHECK"

After connecting it again, restart the unit.

1 GettingStarted

4Table of Contents

		Table of Contents					want
					16		Listening to music from an external
							device
	1				16		– Preventing radical changes in volume
		1		Getting Started			as switching sources
					17		Listening to the TUNER
		2		Safety Information	17		– Storing desired frequencies manually
		5		Front panel [LCS710BR / LCS710DAB]	17		– Listening to a preset station
	2	6		Front panel [LCF810BR / LCF810DAB]	18		– Adjusting TUNER settings
		7		Remote control	19		Listening to the DAB (Only LCS710DAB /
		7		– Battery Installation			LCF810DAB)
					19		– Storing desired frequencies manually
		2		Connecting	19		– Listening to a preset station
	3				20		– Adjusting DAB settings
		8		About detachable control panel	21		Using an USB device / SD card
				[LCS710BR / LCS710DAB]	21		– Moving to another drive
		8		– Attaching the control panel	21		– Quick Search of a desired file
		8		– Detaching the control panel	21		– Playable USB device / SD card
	4	9		About detachable control panel			Requirement
					21		– Recording to USB device / SD card
				[LCF810BR / LCF810DAB]
		9		– Attaching the control panel	22		Listening to music by connecting iPod /
		9		– Detaching the control panel			iPhone
		10		Installation	22		– Pausing or restarting playback
	5	10		– Basic Installation	22		– Searching for a section within a track
		10		– Removing the existing receiver unit			/ file
		10		– ISO-DIN Installation	22		– Checking information about your
		11		Connection			music
		11		– Connecting to a car	23		– Playing back tracks / files in a way you
							want
		3		Operating	23		– Playing back files by music menus
					23		– Two way Control
					23		– Compatible iPod models
		12		Operation
					24		Connecting a Bluetooth wireless
		12		– Basic operations
							technology
		12		– Turning off the sound temporarily
					25		– Using the buttons for Bluetooth
		12		– Using EQ (Equalizer)
							wireless technology
		12		– Checking the clock
					25		– Using a Bluetooth wireless technology
		12		– Turning off the display light
					27		– Adjusting the setting
		12		– Resetting the unit
					28		– Phone compatibility list
		13		– Adjusting the general settings
		14		Listening to a CD
		14		– Pausing or restarting CD playback	4		Troubleshooting
		14		– Searching for a section within a track
					31		Troubleshooting
				/ file
		15		– Skipping to another track/ file
		15		– Checking information about your		5	Appendix
				music
					32		Specifications
		15		– Playing back tracks / files in a way you

		Getting Started	5
Front panel [LCS710BR / LCS710DAB]
a b c d e f g	h	i
		[Front unit detached panel]		1
				Started Getting
j k l m n o	p q r s t u v

aB

Ejects a disc.

b43$ t 0''

-When pressed, selects function sources.

-When pressed and held, powers unit on or off.

cN

Plays and pauses playback.

Temporarily stops the sound.

dVolume knob r "EKVTUT WPMVNF MFWFM r $POñSNT UIF TFUUJOHT r $IFDLT USBDLT ñMFT PS QSFTFU TUBUJPOT

e F

In each mode, sets playback items.

`

Activates setting menu.

fBAND

-Selects a band in Tuner mode.

-Moves to a next USB drive.

t5" J10%

-Searches stations that have TA / TP information, when it is pressed and held.

-Activates Two way Control.

g Remote Sensor h Display window

i6

Opens the front panel.

j R

Recording to USB / SD card.

k

-Activates BT function.

-Answers a call.

l

Returns to the previous step.

Ends a call.

mA / D

Skip / Search / Seek / Tune

nEQ

Improves sound quality.

- When pressed, selects the EQ function.

o%*41

-Press it, you can check the clock time.

-Press and hold it, you can turn on /off the display window and the light of LED buttons.

pINT

Intro scan.

q315

Repeats playback.

r4)'

Shuffles playback.

sNumeric buttons (1 to 6)

Selects a numbered preset station in TUNER.

tAUX

If connected to other portable player, you can enjoy music from it on the unit.

u USB port v SD card slot

1 GettingStarted

6Getting Started

Front panel [LCF810BR / LCF810DAB]

a b c d e

f

g h

[Front unit detached panel]

i j k l m n

o p q

a43$ t 0''

-When pressed, selects function sources.

-When pressed and held, powers unit on or off.

bN

Plays and pauses playback.

Temporarily stops the sound.

cVolume knob

-Adjusts volume level.

-Confirms the settings.

-Checks tracks, files or preset stations.

d F

In each mode, sets playback items.

`

Activates setting menu.

eBAND

-Selects a band in Tuner mode.

-Moves to a next USB drive.

t5" J10%

-Searches stations that have TA / TP information, when it is pressed and held.

-Activates Two way Control.

f Display window g Remote Sensor

h01&/

Opens the front panel.

i R

Recording to USB / SD card.

j

-Activates BT function.

-Answers a call.

k

Returns to the previous step.

Ends a call.

lA / D

Skip / Search / Seek / Tune

mEQ

Improves sound quality.

- When pressed, selects the EQ function.

n%*41

-Press it, you can check the clock time.

-Press and hold it, you can turn on /off the display window and the light of LED buttons.

oAUX

If connected to other portable player, you can enjoy music from it on the unit.

p USB port q SD card slot

Getting Started

7

Remote control

a43$ t 0'' r8IFO QSFTTFE TFMFDUT GVODUJPO TPVSDFT r8IFO QSFTTFE BOE IFME QPXFST VOJU Pí

b'6/$

When pressed, sets playback items in each mode.

t .&/6

When pressed and held, activates setting menu.

cBAND

Selects a band in Tuner mode.

DRV

Moves to a next USB drive.

d d/M Plays or pauses playback. e 4)' Shuffles playback.

f .65& Temporarily stops the sound.

g70-6.& W / S

Adjusts volume level.

hc / v

Skip / Search / Seek / Tune

Returns to the previous step. w / s

r -JTU VQ EPXO r "EKVTUT TFUUJOHT

r .PWFT .1 8." USBDLT CBDLXBSE PS forward if there is no folder or one folder on a CD. r .PWFT UP UIF QSFWJPVT PS OFYU GPMEFS JG UIFSF are more than 2 folders on a CD.

ENTER / LIST r $POñSNT UIF TFUUJOHT r $IFDLT USBDLT ñMFT PS QSFTFU TUBUJPOT

i%*41 r 1SFTT JU ZPV DBO DIFDL UIF DMPDL UJNF r 1SFTT BOE IPME JU ZPV DBO UVSO PO Pí UIF

display window and the light of LED buttons.

j315

Repeats playback.

kINT

Intro scan.

lNumeric buttons (1 to 6)

Selects a numbered preset station in TUNER.

Battery Installation

1.Pull out the battery holder with a sharp product like a ball point pen.

2.Put the battery with and correctly on the battery holder.

3.Push the battery holder back into its original position.

, Note

Use only one CR2025 (3 V) lithium battery.

Remove the battery if the remote control is not used for a long period of time.

Do not leave the product in a hot or humid place.

Do not handle the battery with metallic tools.

Do not store the battery with metallic materials.

1 GettingStarted

8Connecting

About detachable control panel [LCS710BR / LCS710DAB]

Detaching the control panel

1. Press the 6 to open the control panel.

2Attaching the control panel

Connecting

1.Align the left side of the panel with the stopper.

2.Push the right side of panel into the unit until it clicks.

> Caution

The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display.

Do not leave the control panel in any area exposed to high temperatures or direct sunlight.

Do not drop the control panel or otherwise subject it to strong impact.

Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel.

2. Push the control panel to right.

3.Pull the control panel out of the unit.

4.Put the detached control panel into the protective case.

Control panel

Protective Case

, Note

Periodically wipe the contacts on the back of the control panel with a cotton swap

moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch.

	Connecting 9
About detachable	Detaching the control panel
control panel	1. Press the OPEN to open the control panel.
[LCF810BR /
LCF810DAB]

Attaching the control panel

1. Attach part AC of the control panel to part CB of the unit.

i

h

2. Attach part C of the control panel to part D of the unit while pushing the control panel to left.

3. Close the control panel.

2. Push the control panel to left.

3.Pull the control panel out of the unit.

4.Put the detached control panel into the protective case.

	k	Control panel
	j
		Protective Case

>Caution

The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display.

Do not leave the control panel in any area exposed to high temperatures or direct sunlight.

Do not drop the control panel or otherwise subject it to strong impact.

Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel.

, Note

Periodically wipe the contacts on the back of the control panel with a cotton swap

moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch.

2

Connecting

2

Connecting

10 Connecting

Installation

Basic Installation

Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting.

Bend the claws according to the thickness of the dashboard.

Control panel

1.Remove the existing receiver unit.

2.Make the necessary connections.

3.Install the installation sleeve.

4.Install the unit into the installation sleeve.

ISO-DIN Installation

Control panel

1.Slide the unit into the ISO-DIN frame.

2.Fit screws removed from the old unit.

3.Slide the unit and frame into the dash opening.

4.Install the dash panel or adapter plate.

(According to models, this step may not be needed.)

5.Install the trim ring to the unit.

6.Install the control panel to the unit.

Removing the existing receiver unit

If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed.

1.Remove the rear support from the unit.

2.Remove the control panel and trim ring from the unit.

3.Insert the lever into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve.

Connecting 11

Connection

Connecting to a car

Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting.

Wired remote input (Black): Hard-wired control adapter can be connected. (Optional / Not supplied)

	To Audio out	To Audio in
	Sub-woofer Left	Sub-woofer Right	Sub-woofer
	Front Left	Front Right
	Rear Left	Rear Right
			Amplifier
		SMB type of DAB Antenna can be connected.
	Power	(Only LCS710DAB / LCF810DAB)
a b c d a b c d	Antenna
e f g h e f g h		Control Relay
B f Power Antenna (Blue)
B g Dimmer (Pink)	Dimmer Switch
B c To Ignition (Red)	Ignition Switch
B d To Battery (+) (Yellow)		A a
		A	b
		A c
B h Ground (-) (Black)		A
		A d
		A e
			f
		AA g
			h
B e Remote On	Amplifier	A a Gray : Front Right +
(Blue / White)
		A b Gray / Black Stripe: Front Right -
		A c Violet : Rear Right +
B b Phone Mute		A d Violet / Black Stripe: Rear Right -
(Orange)		A e White : Front Left +
		A f White / Black Stripe: Front Left -
B a Not connected		A g Green : Rear Left +
		A h Green / Black Stripe: Rear Left -

2

Connecting