Page 1
LG_DWAM82-D module FCC Test manual.doc
g
CONFIDENTIAL FOR
LG & Namuga
ONLY
LG DWAM82-DB Module for Hx995
FCC Test S/W manual
Module: DWAM82-DB
Date: Jun 03, 2010
Any STS Information is provided “as is” without any express or implied warranty of any kind, including warranties of
merchantability, non-infringement of intellectual property, or fitness for any particular purpose. In no event shall Wireless Sound
Solutions and/or its affiliate companies, or its suppliers liable for any damages whatsoever arising out of the use of or inability to
use the information or the materials. Wireless Sound Solutions, its affiliate companies, and its suppliers further do not warrant the
accuracy or completeness of information, text, graphics, or other items contained within materials. Wireless Sound Solutions, Inc.
may make changes to materials, or the products described within, at any time, without notice. ©2009 Wireless Sound Solutions.
hts reserved. Wireless Sound Solutions, STS and STS-wireless are trademarks of Wireless Sound Solutions.
All ri
© 2010 WSS CONFIDENTIAL
Page 1 of 12
Page 2
CONFIDENTIAL FOR
LG & Namuga
ONLY
Date Revision Location Change Author
Jun 03, 2010 0.1 SG First Draft Won
Hardware used:
4CH EVK.
DWAM82-DB module
LG_DWAM82-D module FCC Test manual.doc
Test software used:
• For EvK : 20100603_FCC_DWAM82-D_12288MHz_ForEVK.hex
• For DWM82-DB module : 20100603_FCC_DWAM82-D_12288MHz_ForEVK.hex
Objective
Showing how to change each mode needed for FCC Test.
© 2010 WSS CONFIDENTIAL
Page 2 of 12
Page 3
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
Classification by index number.
< 2400MHz ~ 2483.5MHz>
RF Band
2.4G Modulated Continuous Tx Ant A
• The index number can be changed by pressing “Spare 3” button on the EVK.
• For more detailed, you can find at the page 9.
Mod/UnMod
Unmodulated Continuous Tx Ant A
Tx/Rx Ant A/B Index Remarks
Ant B
Continuous Rx Ant A
Ant B
Ant B
Continuous Rx Ant A
Ant B
© 2010 WSS CONFIDENTIAL
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0a
0x0b
0x0c
0x0d
0x0e
0x0f
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
Ch 1, Freq : 2412MHz
Ch 2, Freq : 2438MHz
Ch 3, Freq : 2464MHz
Ch 1, Freq : 2412MHz
Ch 2, Freq : 2438MHz
Ch 3, Freq : 2464MHz
Ch 1, Freq : 2412MHz
Ch 2, Freq : 2438MHz
Ch 3, Freq : 2464MHz
Ch 1, Freq : 2412MHz
Ch 2, Freq : 2438MHz
Ch 3, Freq : 2464MHz
Ch 1, Freq : 2412MHz
Ch 2, Freq : 2438MHz
Ch 3, Freq : 2464MHz
Ch 1, Freq : 2412MHz
Ch 2, Freq : 2438MHz
Ch 3, Freq : 2464MHz
Ch 1, Freq : 2412MHz
Ch 2, Freq : 2438MHz
Ch 3, Freq : 2464MHz
Ch 1, Freq : 2412MHz
Ch 2, Freq : 2438MHz
Ch 3, Freq : 2464MHz
Page 3 of 12
Page 4
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
< 5725MHz ~ 5825MHz>
RF Band
5.8G Modulated Continuous Tx Ant A
• The index number can be changed by pressing “Spare 3” button on the EVK.
• For more detailed, you can find at the page 9.
Mod/UnMod
Unmodulated Continuous Tx Ant A
Tx/Rx Ant A/B Index Remarks
Ant B
Continuous Rx Ant A
Ant B
Ant B
Continuous Rx Ant A
Ant B
© 2010 WSS CONFIDENTIAL
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2a
0x2b
0x2c
0x2d
0x2e
0x2f
0x30
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
Ch 1, Freq : 5736MHz
Ch 2, Freq : 5762MHz
Ch 3, Freq : 5814MHz
Ch 1, Freq : 5736MHz
Ch 2, Freq : 5762MHz
Ch 3, Freq : 5814MHz
Ch 1, Freq : 5736MHz
Ch 2, Freq : 5762MHz
Ch 3, Freq : 5814MHz
Ch 1, Freq : 5736MHz
Ch 2, Freq : 5762MHz
Ch 3, Freq : 5814MHz
Ch 1, Freq : 5736MHz
Ch 2, Freq : 5762MHz
Ch 3, Freq : 5814MHz
Ch 1, Freq : 5736MHz
Ch 2, Freq : 5762MHz
Ch 3, Freq : 5814MHz
Ch 1, Freq : 5736MHz
Ch 2, Freq : 5762MHz
Ch 3, Freq : 5814MHz
Ch 1, Freq : 5736MHz
Ch 2, Freq : 5762MHz
Ch 3, Freq : 5814MHz
Page 4 of 12
Page 5
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
Button descriptions on EVK.
• Reset : To reset the whole system and start newly.
• SPARE_1 : To switch RF band between 2.4G and 5.8G.
There is more detailed information at the page 10.
• SPARE_3 : To select a index number which has own functionality as written above.
There is more detailed information at the page 9.
Page 5 of 12
© 2010 WSS CONFIDENTIAL
Page 6
LG_DWAM82-D module FCC Test manual.doc
•
CONFIDENTIAL FOR
LG & Namuga
ONLY
GUI tool descriptions.
- How to update Serial-Com SW for ATMEL MCU.
Double click the GUI tools named
“DARR82_GUI_demo_5Ghz_2_6_1.
exe”
• Once the photos as shown left
appear, please click “I Agree” button.
© 2010 WSS CONFIDENTIAL
• Go to “USB Port Settings” box at the
bottom of GUI tool
• Select the triangle button.
Page 6 of 12
Page 7
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
• At this time, select
“USB1(A3SEB7YE) and press the
“Apply” button to confirm the
settings.
• Do not pay any attention to USB
serial number . It may different from
each computer.
• You could see that the port of USB1
Is open.
• Go to Tools on the top of GUI
• Select “EVK Upgrade” under Tools’s
submenu.
• Please press the button as shown
left .
© 2010 WSS CONFIDENTIAL
Page 7 of 12
Page 8
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
© 2010 WSS CONFIDENTIAL
• As shown left, if the button of
“Change Loadfile” is activated,
please select the
serial_com_V_CU_005_5_8G_FCC.
hex located at “\SW\For_EVK\”
• And then press the “Start Loading”
button to update the EVK.
• Once this update process is
successfully done, success
message of “Check CRC16” will be
shown up and disappear a moment
later.
• Go to Tools menu on the top of GUI
and select it.
• Among a few submenus under
Tools please select “RS232 Info”.
Page 8 of 12
Page 9
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
< Index switching at either 2.4GHz or 5.8G>
© 2010 WSS CONFIDENTIAL
• The pop up window will come out
after you select “RS232 Info”.
• If you look into the red circle, you
can see the current index number.
Index 0 means the idle status.
• At this time, please press “Spare 3”
button to change current index.
• Every time you press “Spare 3
button, the Current Index number
will change.
• The detailed information about Index
number is at the page 3 and 4.
Page 9 of 12
Page 10
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
< Band switching between 2.4G and 5.8G>
• The captured photo shows how to
change RF Band from 5.xGHz to
2.xGHz.
• Press “Spare 1” button on the EVK
=> Current Index will set to “0”
• The index from 0x01 to 0x18 will be
available to select by pressing
“Spare 3” button.
© 2010 WSS CONFIDENTIAL
Page 10 of 12
Page 11
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
- How to update EEPROM on DWAM82-DB.
• Go to “Tools” at the top menu
and select “Program 8052
Firmware”.
• 1) Press “Erase Button”
• 2) Check the message of
“Completed successfully”.
• 3) Make sure the values are
same as snap-shot.
• 4) Search and selec t the hex file
ou need to update with.
• Press “Download button” to start
to update EEPROM.
© 2010 WSS CONFIDENTIAL
Page 11 of 12
Page 12
LG_DWAM82-D module FCC Test manual.doc
CONFIDENTIAL FOR
LG & Namuga
ONLY
• The bar should be in progress.
• After successful update,
message will show like left snapshot.
• CRC value may be different from
each software.
• Press “Reset ” button on EVK.
© 2010 WSS CONFIDENTIAL
Page 12 of 12
Page 13
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference received.
2. This device must accept any interference received. Including interference that may cause
undesired operation.
FCC WARNING
This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change or modification is made.
To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of
the end product.
Contains Transmitter Module FCC ID: BEJ9QK-DWAM82DB
The antenna must be installed such that 20 cm is maintained between the antenna and users,
and the transmitter module may not be co-located with any other transmitter or antenna.
End users cannot modify this transmitter device. Any Unauthorized modification could void the user‘s
authority to operate this device.
Loading...