19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea
PW-MN5275
WLAN Adapter Card
User Guide
Version 1.1
OCT., 2012
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea
Revision History
Release Date Revision Initials
1.1 2012-10-31 First release.
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea
STATEMENT and Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received , including interference that may cause undesired operation.
FCC Caution: Any changes or modifi cations not ex pressly appr oved by the part y responsi ble for
compliance could void the user's authority to operate t his equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
5150-5250MHz is limited “indoor use only”
.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
IC
This device complies with Industry Canad a licens e- ex empt RSS st andar d(s ). Oper at ion is subj ec t
to the following two conditi ons : (1) this device may not cause int erference, and (2) this devi ce
must accept any interferenc e, including interference that may cause undesired operat i o n of the
device.
This equipment complies wi th IC radiation exposure limits set f ort h for an uncontrolled
environment. This equipment s hould be installed and operated wit h minimu m distance 20cm
between the radiator an d your body.
French:
Cet appareil radio est conforme au CNR-210 d’Industrie Canada. L’utilisation de ce dispositif est
autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2)
l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fonctionnement du dispositif.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être inst allé et utilisé av ec un minimum de 20
cm de distance entre la source de rayonnement et votre corps.
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea
Japan
NCC
「依據低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均
不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干
擾現象時,應立即停用,並改善至無干擾時方得繼續使用。
前項合法通信,指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機
設備之干擾。」
任一平台若裝置本模組,其平台標籤須標示 “內建 WiFi 模組 NCC:XXXXXXXXXXX”
This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna
and users, and
The transmitter module may not be co-located with any other tr a nsmitter or antenna.
As long as 2 conditions above are met , further trans mitter test will not be required. However, the
OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain
laptop configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter ) and obtaining a separate FCC authorization.