LG 9QK DMPD221 User Manual
ZINK
Take a photo with the smartphone and
print it right away with
LG Pocket Photo
Android Only
The actual product may dier from the image.
STEP 1 Getting started
Components
LG Pocket Photo Printer
USB data transfer &
recharging cable
ZINK Photo Paper
AC adaptor
Owner’s manual
STEP 2 Charging battery
This device uses built-in battery. Before using it, charge
the battery in full. (Refer to below)
Micro USB port
STEP 3 Inserting Photo Paper
1. Open the Paper Insert Slot Cover.
2. Unwrap the pack of the photo papers.
3. Slide Smart Sheet (Blue one) and photo papers
together into as shown below. Smart Sheet will be out
automatically before rst printing.
Do not insert more than 1 pack (10 Photo papers and 1
y
Smart Sheet). 2 papers may be out at the same time or
paper jam may occur.
Insert a new pack after using up the remains.
y
STEP 4 Installing App
From Play store (Android market)
Search for “LG Pocket Photo”.
Using QR code
Scan the QR code on the product box or cover of the
manual.
STEP 5 Printing Image
Printing by using Bluetooth ( )
Preparation : Turn the device on, and start printing with
the white LED (
1. Launch LG Pocket Photo App on smartphone.
2. Select photo to print, and touch [Print].
3. Touch [Select], then searching Bluetooth device is
4.
button) turning on.
processed.
When Bluetooth connecting for the rst time, [Bluetooth
pairing request] appears. To start printing, touch [Pairing].
If Smart Sheet is in the paper tray, it will be out
y
before starting printing.
The color of impression can be dierent between
y
printed photo and image on smartphone’s display.
Owner’s manual
Please read this manual carefully before
operating your device.
.0%&-1%
Safety information
Do not put the container
containing liquid on.
Do not disassemble, repair,
or converse.
Do not spray water on
directly.
Do not place in dirty or
sooty place.
Do not place in too low
temperature.
Do not drop or give shock.
Do not place near a magnet or
within the magnetic field.
Keep out of reach of
children.
Scan the QR code.
Bluetooth®
Avoid direct sunlight
or heat.
Do not place an heavy
object.
Observe the rated voltage
and current (5 V 1 A).
Clean with a dry cloth.
Do not place in hot or
humid place.
Product Overview
Reset hole
Micro USB port
(for recharging)
USB port
Paper Exit Slot
Paper Insert Slot Cover
(Type A, for Smartphone)
Upper Cover
Paper Insert Slot
Power On / O
On : Press & hold for 4 sec
Note
,
When turning the device on, the
y
for 5 sec. After that, printing is available.
The LED indicator (
y
to give a visual indication of the device condition.
For more information, see “About LED indicator”
on the back page.
Off : Press & hold for 2 sec
button) uses color display
button
(Power)
button ashes
Battery Charging Time : 1.5 hour
Battery Indications of LED indicator (
y
y
y
/ 100 % : (When turned o )
Charging :
10 % : ashes for about 3 sec.
0 % : ashes for about 30 sec and turned o.
Caution
>
Using unauthorized device may cause
y
malfunction. In this case, free product service is
not provided.
Handle with care while charging the device to
y
prevent electric shock.
Note
,
Notes on charging battery
You can connect the device to PC using the USB
y
data transfer & recharging cable provided, but
charging time can be longer.
Battery lasting time can dier depending on
y
the temperature, period you have used for, and
personal mobility .
Once fully charged, you can print up to 15 papers
y
in a row.
When the battery is dead, printing is available
y
after charging it for minimum 10 mins.
(Charge in full when you want to print in a row.)
Notes on handling device (battery)
Do not place near heating appliance.
y
Do not disassemble or deform.
y
Do not give shock on.
y
Avoid too high or low temperature or humidity.
y
button)
Photo Paper
with White side up
Smart Sheet
with Barcode side down
Cleaning Printer head using Smart Sheet
Smart Sheet cleans printer head and corrects the color of
photo. Keep the best print quality by using it repeatedly.
Paper Jam Solution
Do not pull the paper out. Turn the device o and on
again, the paper will be out automatically.
If this problem is not solved, please refer to “Things to
check before reporting problem”.
Caution
>
Pulling out jammed paper by force may result in
malfunction.
Note
,
Notes on Photo Paper
Do not damage or bend the papers.
y
Be careful when you touch the paper not to get
y
dirt on.
Using soiled paper may result in malfunction.
y
Using photo papers from other company may
y
result in malfunction or paper jam.
Check the expiration date on the wrapping before
y
using.
Do not place inside a car or, expose to direct
y
sunlight or moisture.
Do not leave in a place where the temperature
y
or humidity is too high or low. It may cause low
quality images.
Papers can begin to veer o after unwrapping for
y
a long time. Quickly using them is recommended.
Using NFC
Refer to “Printing by using NFC” in the back page.
App Setting
Set the options in [Setting].
*
NFC
: Prints by using NFC
y
(NFC mounted phone only)
Bluetooth : Prints by using Bluetooth
y
USB debugging : Prints by connecting to smartphone
y
y
* NFC : Near Field Communication
** GPS : Global Positioning System using a satellite
See “Help” for details
For more information about the App, touch “Help”.
with a USB cable
**
: Saves the location where you took a photo
GPS
If there are more than a LG Pocket Photo device, check
y
MAC address on the label to choose appropriate one.
(Refer to “Checking Label” on the back page.)
You can print photos without App, but using Bluetooth
y
on Smartphone. Choose a photo to print in [Gallery]
and select Bluetooth in [Share] or [Menu].
Caution
>
Do not pull paper out by force while printing.
y
Do not open the Paper Insert Slot Cover while printing.
y
Do not place an object in front of the Paper Exit Slot.
y
If the device is vibrated or given shock, the print
y
quality may be lower.
Once the battery is fully charged, you can print up
y
to 15 papers in a row. It depends on using time or
way it may dier.
The Bluetooth searching and transferring may
y
fail depending on its environment. Check the
Bluetooth condition on your phone and try again.
PD221_OM_ENG_CEO Sample.indd 1
THE FOLLOWING APPLIES ONLY IN CANADA. CE QUI
FCC Warning:
Changes or modifications not expressly approved
by the party responsible for compliance could void
user＇s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
SUIT NE S’ APPLIQUE QU’ AU CANADA.
This device complies with RSS-210 of the IC Rules.
Operation is subject to the following two conditions:
(1)this device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device
Cet appareil radio est conforme au CNR-210 d’Industrie
Canada. L’utilisation de ce dispositif est autorisée seulement
aux deux conditions suivantes : (1) il ne doit pas produire de
brouillage, et (2) l’utilisateur du dispositif doit être prêt à
accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fonctionnement
du dispositif
FCC/IC Radio Frequency Exposure
The available scientific evidence does not show that any
health problems are associated with using low power wireless
devices. There is no proof, however, that these low power
wireless devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy (RF)
in the microwave range while being used. Whereas high levels
of RF can produce health effects (by heating tissue), exposure
to low level RF that does not produce heating effects causes
no known adverse healt h effects. Many studies of low level
RF exposures have not found any biological effects. Some
studies have suggested that some biological
effects might occur, but such findings have not been
confirmed by additional research. This device have been
tested and found to comply with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules.
Exposition aux radiofréquences FCC/IC
Selon les preuves scientifiques disponibles, aucun problème
de santé n’est associé à l’utilisation d’appareils sans fil de
faible puissance. Rien ne prouve cependant que ces appareils
sont absolument sans danger. Lorsqu’ils sont utilisés, les
appareils sans fil de faible puissance émettent de faibles
niveaux d’énergie radiofréquence (RF) dans la gam me des
hyperfréquences. Bien que les niveaux élevés de
radiofréquence puissant avoir un effet sur la santé
(réchauffement des tissus), l’exposition à de faibles niveaux
n’ayant pas d’effet thermique n’a aucun impact négatif connu
sur la santé. De nombreuses études sur l’exposition aux
radiofréquences de faible niveau n’ont révélé aucun effet
biologique. Certaines d’entre elles ont sous-entendu qu’il
pourrait y avoir de tells effets, mais leurs résultats n’ont pas
été confirmés par des recherches supplémentaires. Les modele
suivants ont ete testes et se sont averes conformes aux limites
d’exposition aux rayonnements definies par la FCC
et IC pour l’environnement non controle ; ils repondent aux
regles sur l’exposition aux rayonnements RF (radiofrequence)
de la FCC et a celles de la norme RSS-102 d’IC.
Hereby declares that this pocket photo is in compliance
with essential requirements and other relevant provision
of R&TTE Directive 1999/5/EC. The standard for
complying are as following:
ETSI EN 301 489-1 V1.9.2:2011-09
ETSI EN 301 489-17 V2.1.1:2009-05
ETSI EN 300 328 V1.7.1:2006
EN 60950-1:2005+A11:2009
Loading...