LG 86BH7C-B User manual [pt]

OWNER’S MANUAL

LG Digital

Signage

(MONITOR SIGNAGE)

Please read this manual carefully before operating your set and retain it for future reference.

86BH5C

86BH7C

www.lg.com

Copyright © 2017 LG Electronics Inc. All Rights Reserved.

<![if ! IE]>

<![endif]>ENGLISH

2

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS.........	3
--Electrical Power Related Precautions....................	3
--Precautions for installing the Product...................	5
--Precautions for Moving the Product......................	6
--Precautions for Using/Cleaning the Product.....	7
--On Disposal
(Only, Hg lamp used LCD Monitor)..........................	7
LICENSES.......................................	8
ASSEMBLY AND
PREPARATION............................	10
--Optional Accessories....................................................	11
--Parts and Buttons..........................................................	13
--External Equipment Setup........................................	13
IR Receiver
--Portrait Layout................................................................	14
--Remove Protective Plastic Film from Sides
before Installation..........................................................	14
--Installing on a Wall........................................................	16
REMOTE CONTROL.....................	18
MAKING CONNECTIONS...........	20
--Connecting to a PC.......................................................	20
--External Device Connection.....................................	20
--Connecting Multiple Monitors................................	22
--Using the Input List.......................................................	23
TROUBLESHOOTING..................	24

PRODUCT SPECIFICATIONS.......

27

3

IMPORTANT PRECAUTIONS

Please read these safety precautions carefully before using the product.

WARNING

Failure to follow those warnings may result in death, serious injury or damage to the product or other property.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

WARNING

•• Indoor Use Only.

Electrical Power Related Precautions

WARNING

•• Use only the power cord supplied with the unit or another manufacturer’s authorized cord. -- Failure to do so may result in fire or electrical shock or damage to the product.

•• Use only a properly grounded plug and receptacle.

-- If you do not you may be electrocuted or injured. Or the product might be damaged.

•• Do not use a damaged or loose plug.

-- This may cause electrical shock or fire.

•• Operate the display only from a power source(i.e. voltage) indicated in the product specification.

-- Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of power supply you have, consult a certified electrician.

•• In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.

-- It can cause electric shock.

•• Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.

-- A fire can break out due to overheating.

•• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord.

-- You may be electrocuted due to excess moisture.

•• If you don’t intend to use the product for a long time, unplug the power cable from the product.

-- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.

<![if ! IE]>

<![endif]>ENGLISH

•• Insert the power plug firm so it cannot come loose. -- A loose connection can cause fire.

<![if ! IE]>

<![endif]>ENGLISH

4

•• Hold the plug when pulling out the power cable. Do not pull the plug out by the wire. Do not bend the power cord with excessive force or put heavy objects on the power cord.

-- The power line can be damaged, which may cause electric shock or fire.

•• Do not insert metal or other conductive materials into the product openings. Additionally, do not touch the power cable right after plugging into the wall input terminal.

-- You may be electrocuted.

•• The appliance coupler is used as the disconnect device.

•• Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible.

•• Do not unplug the power cord while the product is in use. -- Electrical shock can damage the product.

•• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

5

Precautions for installing the Product

WARNING

•• Keep away from heat sources like heaters or open flames.

-- Electrical shock, fire, malfunction or deformation may occur.

•• Keep the packing anti-moisture material or vinyl packing out of the reach of children.

-- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

•• Do not put heavy objects on the product or sit upon it.

-- If the product collapses or is dropped, you may be injured. Children must pay particular attention.

•• Do not leave the power or signal cable where someone can trip over it.

-- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.

•• Install the product in a neat and dry place. Do not use near water.

-- Dust or moisture can cause electrical shock, fire or product damage.

•• Do not add accessories that have not been designed for this display.

•• If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact LG Customer Service.

-- If you continue to use without taking proper measures, electrical shock or fire can occur.

•• If you dropped the product or the case is broken, turn off the product and unplug the power cord.

-- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact LG Customer Service.

•• Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product. -- It can cause injury to humans, problems to the product and damage the display.

•• Keep out of reach of children and do not place toys near the product.

•• Make sure the product ventilation hole is not blocked. Install the product more than 100 mm (3.9 inches) from the wall.

-- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat buildup.

•• Do not cover the product with cloth or other material (eg. plastic) while plugged in. -- The product can be deformed or fire can break out due to internal overheating.

•• Place the product on a flat and stable surface that is large enough to support the product. -- If the product is dropped, you may be injured or the product may be broken.

•• Install the product where no Electromagnetic Interference occurs.

•• Keep the product away from direct sunlight. -- The product can be damaged.

•• Do not place the product on the floor.

-- Small Children and others may trip over it.

•• Do not install this product on a wall if it could be exposed to oil or oil mist. -- This may damage the product and cause it to fall.

<![if ! IE]>

<![endif]>ENGLISH

•• For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.

<![if ! IE]>

<![endif]>ENGLISH

6

Precautions for Moving the Product

WARNING

•• Make sure to turn off the product.

-- You may be electrocuted or the product can be damaged.

•• Make sure to remove all cables before moving the product. -- You may be electrocuted or the product can be damaged.

•• When lifting or moving the product, do not hold it upside down while holding only the stand. -- This may cause the product to fall resulting in damage or injury.

•• Do not shock the product when moving it.

-- You may be electrocuted or the product can be damaged.

•• Make sure the panel faces forward and hold it with both hands to move.

-- If you drop the product, the damaged product can cause electric shock or fire.

•• Do not place the product face down.

-- This may damage the TFT-LCD screen.

7

Precautions for Using/Cleaning the Product

WARNING

•• Do not attempt to disassemble, repair or modify the product yourself. -- Fire or electric shock can occur.

-- Contact LG Customer Service for repair.

•• When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)

•• Keep the product away from water.

-- Fire or electric shock accident can occur.

•• Avoid high temperatures and humidity.

•• Do not put or store flammable substances near the product. -- There is a danger of explosion or fire.

•• Keep the product clean at all times.

•• Take a comfortable and natural position when working with the product.

•• Take a regular break when working with the product for a long time.

•• Do not press on the panel with hands or sharp object such as nail, pencil or pen, or make a scratch on it.

•• Keep proper distance from the product and rest from time-to-time.

-- Your vision may be impaired if you look at the product too closely or for too long.

•• Set the appropriate resolution by referring to the User’s Guide.

•• Keep small accessories out of the reach of children.

•• Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent image or stain caused by long time usage are not covered by the warranty on this product.

•• Do not place products using high voltage around the Monitor. (ex. Electrical Swatter) -- Monitor may have malfunction as its electrical shock.

•• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only. Too much moisture may cause staining.

<![if ! IE]>

<![endif]>ENGLISH

On Disposal (Only, Hg lamp used LCD Monitor)

•• The fluorescent lamp used in this product contains a small amount of mercury.

•• Do not dispose of this product with general household waste.

•• Disposal of this product must be carried out in accordance to the regulations of your local authority..

<![if ! IE]>

<![endif]>ENGLISH

8

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license. Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available at [www.divx.com/patents]

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

9

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol,

& DTS and the Symbol together, DTS 2.0 Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

10

ASSEMBLY AND PREPARATION

CAUTION

•• Always use genuine components to ensure safety and product performance.

•• The product warranty will not cover damage or injury caused by the use of counterfeit components.

NOTE

•• The accessories provided with your product may vary depending on the model or region.

•• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

•• SuperSign Software & Manual

-- Download from the LG Electronics website.

-- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model.

•• The warranty will not cover any damage caused by using the product in an excessively dusty environment.

11

Optional Accessories

Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories.

Media Player kit

<![if ! IE]>

<![endif]>ENGLISH

	Media Player	Screws	CD (Owner’s Manual) / Cards
	MP500 / MP700
		OPS kit

KT-OPSA

Screws

Connecting Cable

Card (Easy Setup Guide)	Power Cord

12

Pixel sensor kit

Wi-Fi Dongle kit

<![if ! IE]>

<![endif]>ENGLISH

KT-SP0

AN-WF500

NOTE

•• Cable holder/cable tie may not be available in some areas or for some models.

•• Optional accessories are available for some models. If necessary, please purchase them separately.

•• Pixel sensor is sold separately. You can obtain additional accessories from an authorized LG Parts distributor.

•• Before you attach the OPS kit or Media Player, connect the cable to the port.

13

Parts and Buttons

The image may be different according to the model.

Buttons

•• INPUT: Changes the input source.

•• MENU: Accesses the main menus, or saves your input and exits the menus.

•• : Adjust the up and down.

•• : Moves left and right.

•• AUTO/SET: Displays the current signal and mode.

••/I: Turns the power on or off.

External Equipment Setup

IR Receiver

This allows a remote control sensor to be placed in a custom location. When configured correctly, display can control other displays via an RS-232C cable.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

14

Portrait Layout

When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen).

Remove Protective Plastic Film from Sides before Installation

Make sure that the protective plastic film is removed from each corner before installing the product.

15

Using Kensington Lock

(This is not available for all models.)

The Kensington security system connector is located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the monitor and a table.

<![if ! IE]>

<![endif]>ENGLISH

NOTE

•• The Kensington security system is optional. You can obtain additional accessories from most electronics retail stores.

<![if ! IE]>

<![endif]>ENGLISH

16

Installing on a Wall

For proper ventilation, allow a clearance of 100 mm (3.9 inches) on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

100 mm (3.9 inches)

100 mm

100 mm

100 mm

100 mm

To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor. Make sure that the wall mounting bracket is securely attached to the monitor and to the wall.

1Use only screws and wall mounting brackets that conform to VESA standards.

2Screws which are longer than standard length may damage the inside of the monitor.

3A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents related to the use of non-standard screws.

4Please use VESA standard as below.

•• 785 mm (30.9 inches) and above

* Mounting Screws: Diameter 8.0 mm x Pitch 1.25 mm x Length 14 mm (Max: 18 mm)

(Diameter 0.3 inches x Pitch 0.04 inches x Length 0.5 inches (Max: 0.7 inches))

785 mm (30.9 inches)

CAUTION

•• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.

•• If you install the monitor on a ceiling or slanted wall, it may fall and result in injury.

•• Do not over tighten the screws as this may damage the monitor and void your warranty.

•• Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by misuse or use of improper accessories are not covered by the warranty.

•• If you want to install the monitor on the wall with the media player and OPS kit attached, leave a space of at least 45 mm (1.7 inches). Otherwise, interference may occur.

Securing the monitor to a wall (optional)

(Procedure may differ depending on the model.)

17

<![if ! IE]>

<![endif]>ENGLISH

1Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor.

-- If there are already bolts inserted in the eyebolts’ position, remove the other bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the monitor.

3Connect the eyebolts and wall brackets tightly with a sturdy cord. Make sure the securing cord is horizontal with the flat surface.

WARNING

•• If the monitor is not positioned in a sufficiently stable location, there is a chance that it may fall. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

-- Using cabinets or stands recommended by the manufacturer. -- Only using furniture that can safely support the monitor.

-- Ensuring the monitor is not overhanging the edge of the supporting furniture.

-- Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support.

-- Not placing cloth or other materials between the monitor and supporting furniture.

-- Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

CAUTION

•• Make sure that children do not climb on or hang from the monitor.

NOTE

•• Use a platform or cabinet that is large and strong enough to support the monitor securely.

•• Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail store.

•• The illustration shows a general example of installation and may look different from the actual product.

<![if ! IE]>

<![endif]>ENGLISH

18

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly.

To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.

CAUTION

•• Do not mix old and new batteries, as this may damage the remote control.

•• Be sure to point the remote control toward the remote control sensor on the monitor.

•• Some features of the remote control may not be supported in certain models.

(POWER) Turns the monitor on or off.

MONITOR ON Turns the monitor on.

MONITOR OFF Turns the monitor off.

Reduces power consumption by adjusting peak screen

brightness.

Selects the input mode.

3D Used for viewing 3D videos.

1/a/A Toggles between numerical and alphabetical.

Number and Alphabet buttons

Enters numerical or alphabetical characters depending upon the setting. CLEAR Deletes the entered numerical or alphabetical character.

Volume Up/Down Button Adjusts the volume.

ARC Selects the Aspect Ratio mode.

AUTO Automatically adjusts picture position and minimizes image instability (available for RGB input only).

Mutes all sounds.

Adjusts the brightness of the display. PAGE Function is not supported in the this model.

19

PSM Selects the Picture Mode. HOME Activates the Launcher.

W.BAL Enters the White Balance menu.

SETTINGS Accesses the main menus or saves your input and exit menus.

SuperSign menu key

Navigation Buttons Scrolls through menus or options.

Selects menus or options and confirms your input.

Allows you to move back one step in the user interaction function. EXIT Quit all OSD tasks and applications.

Allows you to control various multimedia devices to enjoy multimedia simply by using the remote control through the SimpLink menu.

TILE Selects the TILE Mode.

PICTURE ID ON/OFF When the Picture ID number matches the Set ID number, you can control whichever monitor you want in multi-display format.

USB Menu Control Buttons Controls media playback.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

20

MAKING CONNECTIONS

You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device.

Connecting to a PC

Some of the cables are not provided. This monitor supports the Plug and Play* feature.

*Plug and Play: a feature that enables a PC to recognize devices attached by the user without device configuration or user intervention when powering up.

External Device Connection

Some of the cables are not provided. Connect an HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.

For the best picture and sound quality, connecting external devices to your monitor using HDMI cables is recommended.

21

NOTE

•• For the best image quality, using the monitor with HDMI connection is recommended.

•• To comply with the standard specifications of the product, make sure to use a shielded interface cable made with a ferrite core for the DisplayPort cable and DVI-D/HDMI cable.

•• If you turn the monitor on when the set is cold, the screen may flicker. This is normal.

•• Sometimes red, green, or blue spots may appear on the screen. This is normal.

•• Use a High Speed HDMI®/TM cable. (shorter than 3 meters (118.1 inches))

•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

•• Recommended HDMI Cable Types

-- High Speed HDMI®/TM Cable

-- High Speed HDMI®/TM Cable with Ethernet

•• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change the default audio output to HDMI.

•• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.

•• You may experience compatibility issues if you use HDMI-PC mode.

•• Make sure the power cable is disconnected.

•• If you connect a gaming device to the monitor, use the cable provided with the gaming device.

CAUTION

•• Connect the signal input cable and tighten it by turning the screws clockwise.

•• Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on the screen.

•• Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

•• A wireless communication device near your monitor can affect the image.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

22

Connecting Multiple Monitors

To use multiple monitors connected to each other, connect the end of the signal input cable (DP cable) to the DP OUT connection in one monitor and connect the other end to the DP IN connection of the other monitor.

* DP Cable: Use a DP cable that is certified to a DP 1.1a (SST) standard or higher.

417#+7N# #63K},

Monitor 1

Monitor 2

Monitor 3

Monitor 4

NOTE

•• In general, up to 100 monitors can be connected via the DP OUT port (at the recommended resolution) if the signal is stable and there is no signal loss. To connect more than 100 monitors, it is recommended to use a distributor.

•• When the tile mode is configured via HDMI3/DVI-D/OPS cables, HDCP-encrypted content cannot be displayed.

•• If the signal cable connecting the product to your PC is too long, make sure to use a booster or optical cable.

•• HDMI1/2 inputs do not support daisy chaining monitors.

Using the Input List

HOME

•• HDMI1 • HDMI2 • OPS/HDMI3/DVI-D • DISPLAYPORT

23

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

24

TROUBLESHOOTING

No image is displayed.

Problem	Action
Is the product power cord connected?	•• Check if the power cord is correctly plugged into the power outlet.
Does an “Invalid Format” message	•• The signal from the PC (graphics card) is out of the vertical or
appear?	horizontal frequency range of the product. Adjust the frequency range
	by referring to the Specifications in this manual.
Does an “No Signal” message appear?	•• The signal cable between PC and product is not connected. Check the
	signal cable.
	•• Press the INPUT menu in the remote control to check the input signal.

The Unknown Product message appears when the product is connected.

	Problem			Action
Did you install the driver?				•• Check if the Plug and Play function is supported by referring to the
				graphics card user manual.
	The screen image looks abnormal.
	Problem			Action
Is the screen position wrong?				•• Check if the graphics card resolution and frequency are supported by
				the product. If the frequency is out of range, set to the recommended
				resolution in the Control Panel Display Setting menu.
The screen is displayed abnormally.				•• The proper input signal is not connected to the signal port. Connect the
				signal cable that matches with the source input signal.
The PC BIOS configuration screen is not				•• On some PCs, the BIOS configuration screen may not display correctly
displayed correctly.				because the 58:9 aspect ratio is not supported before the graphics
				card driver is configured. This is not a problem of the product; it is due
				to the design of the graphics card’s BIOS configuration screen aspect
				ratio. To access the PC BIOS configuration screen, please connect a
				standard aspect ratio (4:3 or 16:9) monitor, then perform the BIOS
				configuration.
	After-image appears on the product.
	Problem			Action
After-image appears when the product is				•• If you use a fixed image for a long time, the pixels may be damaged.
turned off.				Use the screen-saver function.
				•• When a dark image is displayed on the screen after an image with high
				contrast (black and white or gray), this may cause image sticking. This
				is normal for LCD screen products.

25

The audio function does not work.

	Problem			Action
No sound?				•• See if the audio cable is connected properly.
				•• Adjust the volume.
				•• See if the sound is set properly.
Sound is too dull.				•• Select the appropriate equalizer sound.
Sound is too low.				•• Adjust the volume.
	Screen color is abnormal.
	Problem			Action
Screen has poor color resolution (16				•• Set the number of colors to more than 24 bits (true color). Select
colors).				Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or mono-colored.				•• Check the connection status of the signal cable. Or, re-insert the PC
				graphics card.
Do black spots appear on the screen?				•• Several pixels (red, green, white, or black color) may appear on the
				screen, which can be attributable to the unique characteristics of the
				LCD panel. This is not a malfunction of the LCD.
	The operation does not work normally.
	Problem			Action
The power suddenly turned off.				•• Is the Timer set?
				•• Check the power control settings. Power interrupted.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

26

CAUTION

•• Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once every 12 hours at the very minimum; if done more frequently, the prevention of image sticking is more effective.

Recommended operating conditions

1 Change the background and the character colors using the same time interval.

ID: UPM 123				ID: UPM 123
PW: ****				PW: ****

When changing colors, using complementary colors helps to prevent image sticking.

		Glass
	BM	BM	BM
CF	CF	CF	CF
		OC
		PI

LC

PI

TFT Layers

Glass

ITO or MoTi Pixel Layer

2 Change the image using the same time interval.

Make sure that the characters or images before changing the image remain in the same location after changing the image.

What is image sticking?

When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over time, liquid crystals have a tendency to remain aligned in one direction. During this process, a previously displayed image remains visible. This phenomenon is referred to as image sticking.

27

PRODUCT SPECIFICATIONS

The product specifications below may be changed without prior notice due to upgrade of product functions.

LCD screen	Screen type	Thin Film Transistor (TFT)
		Liquid Crystal Display (LCD) Screen
Video signal	Maximum resolution	HDMI1 / HDMI2: 3840 x 2160 @ 60 Hz
		HDMI3 / DisplayPort: 3840 x 2160 @ 30 Hz
		OPS: 3840 x 600 @ 60 Hz
		DVI-D: 1920 x 1080 @ 60 Hz
		-- This may not be supported on some OS or graphic card types.
	Recommended resolution	HDMI1,2,3 / DisplayPort / OPS: 3840 x 600 @ 60 Hz
		DVI-D: 1920 x 300 @ 59 Hz
		-- This may not be supported on some OS or graphic card types.
	Horizontal frequency	HDMI / DVI-D / DisplayPort / OPS: 28.1 kHz to 136 kHz
	Vertical frequency	HDMI / DVI-D / DisplayPort / OPS: 50 Hz to 62 Hz
	Synchronization	Separate Sync, Digital
Input / Output ports		SD, USB 2.0 IN, USB 3.0 IN, LAN IN/OUT, DP IN/OUT, DVI-D IN,
		IR&LIGHT SENSOR, PIXEL SENSOR, HDMI(1) IN, HDMI(2) IN,
		HDMI(3) IN, RS-232C IN/OUT, AUDIO IN/OUT
Embedded battery		Applied
Environmental	Operating Temperature	0 °C to 40 °C (32 °F to 104 °F)
Conditions	Operating Humidity	10 % to 80 %
	Storage Temperature	-20 °C to 60 °C (-4 °F to 140 °F)
	Storage Humidity	5 % to 85 %
Audio	Input Sensitivity	0.7 Vrms

“” refers to alternating current (AC), and “” refers to direct current (DC).

<![if ! IE]>

<![endif]>ENGLISH

28

	<![if ! IE]> <![endif]>ENGLISH			86BH5C
		LCD screen	Pixel pitch	0.5595 mm (H) x 0.5595 mm (V)
		Power	Rated power	AC 100-240 V~ 50/60 Hz 2.4 A
			Power consumption	On Mode: 180 W (Typ.)
				Sleep Mode (DVI-D, HDMI1/2/3): ≤ 30 W
				Sleep Mode (DisplayPort): ≤ 1.0 W
				Off Mode: ≤ 0.5 W
		Dimensions (Width	Head	2158.3 mm x 348.5 mm x 81.7 mm / 20.5 kg
		x Height x Depth) /		(84.9 inches x 13.7 inches x 3.2 inches / 45.1 lbs)
		Weight

		86BH7C
LCD screen	Pixel pitch	0.5595 mm (H) x 0.5595 mm (V)
Power	Rated power	AC 100-240 V~ 50/60 Hz 2.7 A
	Power consumption	On Mode: 215 W (Typ.)
		Sleep Mode (DVI-D, HDMI1/2/3): ≤ 30 W
		Sleep Mode (DisplayPort): ≤ 1.0 W
		Off Mode: ≤ 0.5 W
Dimensions (Width	Head	2158.3 mm x 348.5 mm x 81.7 mm / 20.5 kg
x Height x Depth) /		(84.9 inches x 13.7 inches x 3.2 inches / 45.1 lbs)
Weight

29

HDMI1,2,3 / DVI-D / DisplayPort / OPS (PC) Support Mode

	Resolution	Horizontal frequency		Vertical frequency (Hz)	Remark
		(kHz)
	800 x 600	37.879		60.317
	1024 x 768	48.363		60
	1280 x 720	44.772		59.855
	1280 x 1024	63.981		60.02
	1920 x 1080	67.5		60
	1920 x 300	18.750		58.777	DVI-D
	3840 x 600	37.398		59.933	HDMI1,2,3 / DisplayPort
					/ OPS
	HDMI1,2,3 / DisplayPort (DTV) Support Mode
	Resolution	Horizontal frequency		Vertical frequency (Hz)	Remark
		(kHz)
	480/60p	31.5		60
	576/50p	31.25		50
	720/50p	37.5		50
	720/60p	45		60
	1080/50i	28.1		50
	1080/60i	33.75		60
	1080/50p	56.25		50
	1080/60p	67.432		59.94
	1080/60p	67.5		60
	2160/30p	67.5		30	HDMI1,2,3 / DisplayPort
	2160/50p	112.5		50	HDMI1,2
	2160/60p	135		60	HDMI1,2

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

30

Multi-screen (PC) Support Mode

	Resolution	Horizontal frequency		Vertical frequency (Hz)	Remark
			(kHz)
	1920 x 1080	67.5		60
	1920 x 600	37.4		59.93	Recommended resolution
					for two-screen split screen
	1280 x 600	37.35		59.85	Recommended resolution
					for three-screen split screen
	960 x 600	37.4		59.93	Recommended resolution
					for four-screen split screen
	Multi-screen (DTV) Support Mode
	Resolution	Horizontal frequency		Vertical frequency (Hz)	Remark
			(kHz)
	1080/60p	67.432		59.94	HDTV 1080P 60Hz
	1080/50p	56.25		50	HDTV 1080P 50Hz
	720/60p	45		60	HDTV 720P
	720/50p	37.5		50	HDTV 720P

NOTE

•• PC resolutions available for the Input Label option in HDMI / DVI-D / DisplayPort input modes: 640 x 480/60 Hz, 1280 x 720/60 Hz, 1920 x 1080/60 Hz, 3840 x 2160/60Hz; 480p, 720p,1080p and 2160p DTV resolutions.

•• Vertical frequency: The product display functions by the screen image changing dozens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz.

•• Horizontal frequency: The horizontal interval is the time taken to display one horizontal line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz.

•• For the recommended resolution of 3840 x 600, use a graphics card that is UHD (3840 x 2160) compatible.

•• When using a graphics card that does not support the recommended resolution (3840 x 600), a resolution of 1920 x 300 or 1920 x 1080 can be used instead.

•• Some graphics cards may not support a 3840 x 600 resolution.

•• In Multi-screen mode, the resolution changes to fit the screen.