LG 72WX70MF-B Owner’s Manual

OWNER’S MANUAL

MONITOR SIGNAGE

Please read this manual carefully before operating the your set and retain it for future reference.

MONITOR SIGNAGE MODELS

72WX70MF

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2 TABLE OF CONTENTS

TABLE OF CONTENTS

	3	LICENSES	31		- DivX® VOD Guide
			32		- Using PIP/PBP
	4	ASSEMBLING AND
				34 CUSTOMIZING SETTINGS
		PREPARING
			34		Accessing Main Menus
	4	Accessories
			35		- PICTURE Settings
	5	Parts and Buttons
			38		- AUDIO Settings
	6	Portrait Layout
			39		- TIME Settings
	6	Pemnut Not to be Used
			40		- OPTION Settings
	7	REMOTE CONTROL	45		- NETWORK Settings

46 MAKING CONNECTIONS

9 USING THE MONITOR

9Connecting to a PC

10- RGB Connection

10- DVI-D Connection

11- HDMI Connection

11- Display Port Connection

12Adjusting the Screen

12- Selecting an Image Mode

12- Customizing Image Options

13- Customizing PC Display Options

13Adjusting the Sound

13- Selecting an Sound Mode

14- Customizing Sound Options

14 Using Additional Options

14 - Adjusting Aspect Ratio

16- Using the Input List

17ENTERTAINMENT

17- Connecting to a Wired Network

18- Network Status

19- Connecting USB Storage Devices

20- Browsing Files

21- Viewing Movies

25 - Viewing Photos

28 - Listening to Music

30 - Viewing the Contents List

47External Device Connection

47- HDMI Connection

47- Component Connection

48- AV (CVBS) Connection

48Connecting to a USB

49Connecting to the LAN

49- LAN Connection

50Daisy Chain Monitors

51TROUBLESHOOTING

54 SPECIFICATIONS

57 IR CODES

58 CONTROLLING THE MULTIPLE

PRODUCT

58Connecting the Cable

58RS-232C Configurations

58Communication Parameter

59Command reference list

61 Transmission / Receiving protocol

LICENSES 3

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod. divx.com. Find your registration code in the DivX VOD section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

NOTE

yyThe warranty will not cover any damages caused by using the product in an excessively dusty environment.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Accessories

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

POWER
MONITOR	ENERGY INPUT
ON	OFF
	SAVING
. ,!	ABC	DEF
GHI	JKL	MNO
PQRS	TUV WXYZ
1/a/A	-*#	CLEAR
	MARK
	ARC
		BRIGHT	P
	PSM		A
		NESS	E
	MUTE
MENU	AUTO	S.MENU
	OK
BACK	TILE	EXIT
ID
ON	OFF

Remote Control and Batteries					Power Cord
					* The power cord may not be provided
					depending on the region you purchased
					the product.

CD (Owner's Manual) / Cards

IR Expansion PCB

D-sub 15-Pin Signal Cable

CAUTION

yyDo not use any pirated items to ensure the safety and product life span.

yyAny damages or injuries by using pirated items are not covered by the warranty.

NOTE

yyThe accessories provided with your product may vary depending on the model or region.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

yySuperSign Software & Manual

-Downloading from the LG Electronics website.

-Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for your model.

ASSEMBLING AND PREPARING 5

Parts and Buttons

<![if ! IE]>

<![endif]>ENGLISH

Illuminance sensor/

IR Receiver

Power Indicator

USB IN	DP IN	DVI IN	DVI OUT	RGB/AV	AUDIO IN	LAN
				/COMPONENT IN
	RS-232C IN	RS-232C OUT	EXT IR IN	SPEAKER

Connection panel

Screen Marks	Description
IR Receiver	This is where the unit receives signals from the remote control.
Power Indicator	This Indicator lights up red when the display operates normally(on mode). If the display
	In sleep mode (In Power Saving mode), this indicator color changes to amber.
Illuminance sensor	Adjusts the screen brightness by measuring the amount of light.

NOTE

yyYou can set the Power indicator to on or off by selecting OPTION in the main menu.

<![if ! IE]>

<![endif]>ENGLISH

6 ASSEMBLING AND PREPARING

Portrait Layout

When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).

Pemnut Not to be Used

If you use pemnut arbitrarily, the product may be damaged.

Back of the Product

Pemnut

REMOTE CONTROL 7

REMOTE CONTROL

The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

CAUTION

yyDo not mix old and new batteries, as this may damage the remote control.

yyMake sure to point the remote control at the remote control sensor on the Monitor.

<![if ! IE]>

<![endif]>ENGLISH

(POWER)

Turns the Monitor on or off.

MONITOR ON / OFF

Turn off the monitor and then turn it back on.

1/a/A Button

This button selection is not applicable.

ARC

Selects the Aspect Ratio Mode.

MARK

Selects a specific file in the USB mode.

Volume Up / Down

Adjusts the volume level.

PSM

Selects the Picture Status

Mode.

MUTE

Mutes all sounds.

POWER

MONITOR

ENERGY

INPUT

ENERGY SAVING

Adjusts the brightness of the screen to reduce energy consumption.

INPUT

Selects the input mode.

ON OFF

SAVING

.,!	ABC
GHI	JKL
PQRS	TUV
1/a/A	-*#

DEF

MNO

WXYZ

CLEAR

MARK

ARC

Number and Alphabet Buttons

Enters numbers.

The alphabet selection is not applicable.

CLEAR

This button selection is not applicable.

PSM	BRIGHT	P
		A
	NESS	G
		E

BRIGHTNESS Key

Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list.

8 REMOTE CONTROL

<![if ! IE]>

<![endif]>ENGLISH

MENU

Accesses the main menus or saves your input and exit menus.

Navigation Buttons

Scrolls through menus or options.

OK

Selects menus or options and confirms your input.

BACK

Allows the user to move back one step.

AUTO

Automatically adjusts picture position and minimizes image instability.(RGB input only)

	S.MENU
	(SuperSign Menu Key)
OK	This button selection is not
	applicable.

		EXIT
BACK	EXIT	Clears all on-screen displays
ID		and returns to Monitor
ON	OFF	viewing from any menu.

	TILE
ID ON/OFF	Selects the TILE Mode.
When more than one monitor
is present in the same room,
this allows you to control them	USB Menu Control Buttons
individually.
	Controls media playback.

USING THE MONITOR 9

USING THE MONITOR

Connecting to a PC

Your Monitor supports the Plug & Play* feature.

* Plug & Play: This is the function that allows a PC to use the monitor without installing a driver.

NOTE

yyIt is recommended to use the Monitor with the HDMI connection for the best image quality.

yyUse a shielded signal interface cable, such as D-sub 15-pin signal cable and DVI cable, with a ferrite core to maintain standard compliance for the product.

yyIf you turn the monitor on when the set becomes cold, the screen may flicker. This is normal.

yySome red, green, or blue spots may appear on the screen. This is normal.

CAUTION

yyConnect the signal input cable and tighten it by turning the screws clockwise.

yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

10 USING THE MONITOR

RGB Connection

Transmits the analog video signal from your PC to the monitor. Connect the PC and the monitor

set with the 15-pin signal cable as shown the following illustrations.

Select RGB input source on the monitor.

DVI-D Connection

Transmits the digital video signal from your PC to the monitor. Connect the PC and the monitor

set with the DVI cable as shown the following illustrations.

Select DVI-D input source on the monitor.

Back of the Product

Back of the Product

RGB/AV

/COMPONENT IN

AUDIO IN

DVI IN

AUDIO IN

(not included)

(not included)

(not included)

Macintosh

Adapter

(not included)

PC/MAC	PC	PC	PC

NOTE

yyUse the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling

system)

yyApple computers may require an adapter to connect to this monitor. Call or visit their web site for more information.

USING THE MONITOR 11

HDMI Connection

Transmits the digital video and audio signals from your PC to the monitor. Connect the PC and the monitor with the HDMI cable as shown in the following illustrations.

Select HDMI input source.

Back of the Product

(not included)

PC

NOTE

yyUse a High Speed HDMI®/TM Cable. yyUse a certified cable with the HDMI logo

attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

yyRecommended HDMI Cable Types

-High-Speed HDMI®/TM Cable

-High-Speed HDMI®/TM Cable with Ethernet yyPlease check the PC environment if you yyPlease check the PC environment if you

cannot hear the sound in HDMI mode. Some PCs require you to manually change the default audio output to HDMI.

yyIf you want to use HDMI PC mode, you must set PC/DTV to PC mode.

yyWhen HDMI PC is used, a compatibility problem might occur.

Display Port Connection

Transmits the digital video and audio signals from your PC to the monitor. Connect the PC and the monitor with the Display Port cable as shown in the following illustrations.

Select Display Port input source.

Back of the Product

DP IN

(not included)

PC

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

12 USING THE MONITOR

Adjusting the Screen

Selecting an Image Mode

Display images in its optimized settings by selecting one of the preset image modes.

1Press MENU to access the main menus.

2Press the navigation buttons to scroll to

PICTURE and press OK.

3Press the navigation buttons to scroll to

Picture Mode and press OK.

4Press the navigation buttons to scroll to an image mode you want and press OK.

Mode	Description
Vivid	Adjusts the video image for the retail
	environment by enhancing the contrast,
	brightness, color, and sharpness.
Standard	Adjusts the image for a normal
	environment.
Cinema	Optimizes the video image for a cinematic
	look to enjoy movies as if you are in a
	movie theater.
Sport	Optimizes the video image for high and
	dynamic actions by emphasizing primary
	colors such as white, grass, or sky blue.
Game	Optimizes the video image for a fast
	gaming screen such as PCs or games.

5When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Customizing Image Options

Customize basic and advanced options of each image mode for the best screen performance.

1Press MENU to access the main menus.

2Press the navigation buttons to scroll to

PICTURE and press OK.

3Press the navigation buttons to scroll to

Picture Mode and press OK.

4Press the navigation buttons to scroll to an image mode you want and press OK.

5Select and adjust the following options, and then press OK.

Option	Description
Backlight	Adjusts the brightness of the screen
	by controlling the LCD backlight. If
	you decrease the brightness level,
	the screen becomes darker and the
	power consumption will be reduced
	without any video signal loss.
Contrast	Increases or decreases the gradient
	of the video signal. You may use
	Contrast when the bright parts of the
	picture are saturated.
Brightness	Adjusts the base level of the signal in
	the picture. You may use Brightness
	when the dark areas of the picture are
	saturated.
Sharpness	Adjusts the level of crispness in the
	edges between the light and dark
	areas of the picture. The lower the
	level, the softer the image.
Color	Adjusts intensity of all colors.
Tint	Adjusts the balance between red and
	green levels.
Color Temp.	Set to warm to enhance hotter Colors
	such as red, or set to cool to make
	picture bluish.
Advanced	Customizes the advanced options.
Control	Refer to the Advanced image options.
Picture Reset	Restores the options to the default
	setting.

6 When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

USING THE MONITOR 13

Customizing PC Display Options

Customize options of each image mode for the best image quality.

yyThis function works in the following mode: RGB [PC] mode.

1Press MENU to access the main menus.

2Press the navigation buttons to scroll to

PICTURE and press OK.

3Press the navigation buttons to scroll to Screen and press OK.

4Select and adjust following options, and then press OK.

Option

Resolution

Auto

Config.

Position/

Size/Phase

Reset

Description

Selects a proper resolution. See “Customizing PC display options”.

Adjusts the screen position, clock, and phase automatically.

The displayed image may be unstable for a few seconds while the configuration is in progress.

Adjusts the options when the picture is not clear, especially when characters are shaky. Run Auto Config. before adjusting these.

Restores the options to the default setting.

5When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Adjusting the Sound

Selecting an Sound Mode

This Monitor has 5 preset sound modes to compliment different types of video content.

1Press MENU to access the main menus.

2Press the navigation buttons to scroll to AUDIO and press OK.

3Press the navigation buttons to scroll to Sound Mode and press OK.

4Press the navigation buttons to scroll to a sound mode you want and press OK.

Mode	Description
Standard	Select when you want standard-quality
	sound.
Music	Select when you listen to music.
Cinema	Select when you watch movies.
Sport	Select when you watch sport events.
Game	Selects when you play games.

5When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

14 USING THE MONITOR

Customizing Sound Options

You may customize options of each sound mode for the best sound quality.

1Press MENU to access the main menus.

2Press the navigation buttons to scroll to AUDIO and press OK.

3Press the navigation buttons to scroll to Sound Mode and press OK.

4Press the navigation buttons to scroll to a sound mode you want and press OK.

5Select and adjust following options, and then press OK.

Option	Description
Infinite	LG's Infinity Sound option provides 5.1
Sound	channel stereo quality sound from two
	speakers.
Treble	Controls the dominant sounds in the
	output. When you turn up the treble, it
	will increase the output of the higher
	frequency range.
Bass	Controls the softer sounds in the
	output. When you turn up the bass, it
	will increase the output of the lower
	frequency range.
Reset	Resets the sound mode to the default
	setting.

6When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Using Additional Options

Adjusting Aspect Ratio

Resize the image to view the image at its optimal size by pressing ARC while you are watching content.

CAUTION

yyIf a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

yyIf the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

NOTE

yyYou can also change the image size by accessing the main menus.

MODE	AV	Component	RGB	Display		DVI-D		HDMI
				Port
ARC			PC	DTV	PC	DTV	PC	DTV	PC
16:9	o	o	o	o	o	o	o	o	o
Just Scan	x	o	x	o	x	o	x	o	x
1:1	x	x	o	x	o	x	o	x	o
4:3	o	o	o	o	o	o	o	o	o
Zoom	o	o	x	o	x	o	x	o	x
Cinema	o	o	x	o	x	o	x	o	x
Zoom1

	USING THE MONITOR 15
- 16:9 : This selection will allow you to adjust the	- 4:3 : This selection will allow you to view a
picture horizontally, in linear proportion, to fill the	picture with an original 4:3 aspect ratio, black
entire screen (useful for viewing 4:3 formatted	bars will appear on both the left and right of the
DVDs).	screen.

-Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image.

Note: If there is noise in original picture, You can see the noise at the edge.

-Zoom : This selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.

JustScan

- 1:1 : The aspect ratio is not adjusted from the	- Cinema Zoom 1 : Choose Cinema Zoom
original. (Only Display Port PC, HDMI PC,	when you want to enlarge the picture in correct
DVI-D PC, RGB PC)	proportion. Note: When enlarging or reducing
	the picture, the image may become distorted.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

16 USING THE MONITOR

Using the Input List

Selecting an input source

1Press INPUT to access the input source list.

-The connected device displays on each input source.

2Press the Navigation buttons to scroll to one of the input sources and press OK.

Input source	Description
AV	Watch video from a VCR or other
	external devices.
Component	Watch content from a DVD or other
	external devices, or through a
	digital set-top box.
RGB	View a PC display on the screen.
Display Port	Watch content from a PC, DVD
	of Digital set-top box other high
	definition devices.
DVI-D	View a PC display on the screen.
HDMI	Watch content from a PC, DVD
	of Digital set-top box other high
	definition devices.

ENTERTAINMENT 17

ENTERTAINMENT

Connecting to a Wired Network

(Depending on model)

Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings.

This monitor only supports a wired network connection.

After making a physical connection, a small number of home networks may require the display network settings to be adjusted. For most home networks, the display will connect to automatically without any adjustments.

For detail information, contact your internet provider or router manual.

WAN

Router

To set up the network seetings: (Even if your display has already connected automatically, running setup again will not harm anything),

1Press MENU to access the main menus.

2Press the navigation buttons to scroll to NETWORK and press OK.

3Press the navigation buttons to select Network Setting and press OK.

4If you already set network setting, select Resetting. The new connection settings resets the current network settings.

5Select IP Auto Setting or IP Manual Setting.

-If selecting IP Manual Setting, press the Navigation and Number buttons. IP addresses will need to be input manually.

-IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the display will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined.

6When you are finished, press EXIT.

	@
							ETHERNET
				Cable modem
	Internet

CAUTION

yyDo not connect a modular phone cable to the LAN port.

yySince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.

CAUTION

yyNetwork setting menu will not be available until the display is connected to physical network.

yySince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

18 ENTERTAINMENT

NOTE

yyIf you want to access the Internet directly on your display, the internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon-

nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions associated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your responsibility.

yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub scription to one device, this display may

not be allowed to connect when a PC is already connected.)

yyThe use of a Router may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press MENU to access the main menus.

2Press the navigation buttons to scroll to NETWORK and press OK.

3Press the navigation buttons to select Network Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

	Option	Description
	Setting	Return to the network setting menu.
	Test	Test the current network status after
		setting the network.
	Close	Return to the previous menu.

ENTERTAINMENT 19

Connecting USB Storage Devices

Tips for using USB storage devices

yyOnly a USB storage device is recognizable.

You can connect USB storage devices such as

yyIf the USB storage device is connected

a USB flash memory, external hard drive to the

through a USB hub, the device is not recog-

display and use multimedia features .

nizable.

Connect a USB flash memory or USB memory

yyA USB storage device using an automatic

card reader to the Display as shown on the follow-

recognition program may not be recognized.

ing illustration. The My media screen appears.

yyA USB storage device which uses its own

driver may not be recognized.

yyThe recognition speed of a USB storage

device may depend on each device.

or

yyPlease do not turn off the display or unplug

the USB device when the connected USB

storage device is working. When such device

is suddenly separated or unplugged, the

stored files or the USB storage device may

be damaged.

yyPlease do not connect the USB storage device

which was artificially maneuvered on the PC.

The device may cause the product to malfunc-

tion or fail to be played. Never forget to use

only a USB storage device which has normal

music files, image files, or movie files.

yyPlease use only a USB storage device which

was formatted as a FAT32 file system or

NTFS file system provided with the Win-

dows operating system. In case of a storage

device formatted as a different utility program

which is not supported by Windows, it may

CAUTION

not be recognized.

yyDo not turn the display off or remove a USB

yyPlease connect power to a USB storage

device(over 0.5 A) which requires an external

storage device while the EMF (my media)

power supply. If not, the device may not be

Menu is activated, as this could result in

loss of files or damage to the USB storage

recognized.

device.

yyPlease connect a USB storage device with

yyBack up your files saved on a USB storage

the cable offered by the device maker.

device frequently, as you may lose or dam-

yySome USB storage devices may not be sup-

age the files and this may be not covered by

ported or operated smoothly.

the warranty.

yyFile alignment method of USB storage

device is similar to Window XP and filename

can recognize up to 100 English characters.

yyBe sure to back up important files since data

stored in a USB memory device may be

damaged. We will not be responsible for any

data loss.

yyIf the USB HDD does not have an external

power source, the USB device may not be

detected. So be sure to connect the external

power source.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

20 ENTERTAINMENT

- Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.

yyIf your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.

yyIf a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.

yyIf the USB memory device does not work properly, disconnect and reconnect it.

yyHow fast a USB memory device is detected differs from device to device.

yyIf the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the display is turned on.

yyThe recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.

yyAny device with more than the recommended capacity may not work properly.

yyIf a USB external hard disk with a Energy Saving function does not work, turn the hard disk off and on again to make it work properly.

yyUSB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.

yyMaximum of 999 folders or files can be recognized under one folder.

yyIt is recommended to use a certified USB storage device and cable. Otherwise, a USB storage device may not be detected or a playback error may occur.

yyOnly a USB memory stick can be used to play back the files distributed and stored by SuperSign Manager. A USB hard disk or multi-card reader will not work.

yyOnly an FAT 32 file formatted storage device can play back the files distributed and stored by SuperSign manager.

yyA USB 3.0 storage device may not work. yyData on some USB storage devices may be

damaged in a high temperature environment.

Browsing Files

Access the photo, music, or movie lists and browse files.

1Connect a USB storage device.

2Press MENU to access the main menus.

3Press the navigation buttons to scroll to My Media and press OK.

4Press the navigation buttons to choose from Movie List, Photo List, Music List, or Contents List and press OK.

Movie List		Photo List		Music List		Contents List

				1		2
Photo List						1/1
USB External				Drive1				Page 1/1	4
001	002	003	004	005	006	007	008	009	5
010	011	012	013	014	015
			Move	View		Page Change		Mark
To Music List		Change Numbers			Mark Mode		Exit
				3
No.					Description

1Moves to upper level folder

2Current page/Total pages Corresponding buttons on the

3remote control

Current page/ total pages of

4contents under the folder focused on 1

Contents under the folder

5focused on 1

	Button	Description
		Repeatedly, press the GREEN button to
	Green	converted to Movie List->Photo List,
		Photo List->Music List, Music List-
	Button
		>Contents List or Contents List->Movie
		List.
	Yellow A method to view in 5 large thumbnail
	Button	or simple list.
	Blue	Convert to Mark Mode.
	Button

ENTERTAINMENT 21

Supported File Formats

Type	Supported file format
Movie	DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
	RP,TP,ASF,WMV,FLV)
	Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
	mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
	avi(motion-jpeg)/*.
	mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
	file
	Video format : DivX 3.11, DivX4, DivX5. DivX6
	Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
	beta-1/beta-2,
	Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
	JPEG, Sorenson H.263
	Audio format : Dolby Digital, AAC, Mpeg, MP3,
	LPCM, HE-AAC, ADPCM, WMA
	Bit rate : within 32 kbps to 320 kbps(MP3)
	External Subtitle format : *.smi/*.srt/*.sub
	(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
	txt(TMPlayer)/*.psb(PowerDivX)
	Internal Subtitle format : only, XSUB (It is the
	subtitle format used in DivX6 files)
Photo	JPEG
	Baseline : 64 x 64 to 15360 x 8640
	Progressive : 64 x 64 to 1920 x 1440
	yy You can play JPEG files only.
	yy Non-supported files are displayed in the form
	of predefined icon.
Music	MP3
	Bit rate 32 to 320
	yy Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
	kHz, 48 kHz
	yy Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
	kHz, 24 kHz
	yy Sampling rate MPEG2.5 Layer3 : 8 kHz,
	11.025 kHz, 12 kHz

Content File Extensions : *.cts/ *.cse

(when Movie using

SuperSign File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*. Manager) trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.

wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*. mkv(motion JPEG)

Video format: MPEG1, MPEG2, MPEG4,H.264/ AVC, DivX 3.11, DivX4, DivX5. DivX6,

Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xwvid 1.10-beta1/2, JPEG, VC1(WVC1/WMV3)

Audio format: MP2,MP3,Dolby Digital, LPCM,

AAC, HE-AAC,LPCM, ADPCM, WMA, MP3

Type		Supported file format
		File	Item	Profile
		Extensions
	Photo	JPEG	supported	yy SOF0:
		JPG	file format	baseline
				yy SOF1:
		PNG
				Extend
		BMP
				Sequential
				yy SOF2:
				Progressive
			Photo size	yy Min: 64 x 64
				yy Max Type:
				1366 x 768
	Music	MP3	Bit rate	32 kbps to 320
				kbps
			Sampling	32 kHz, 44.1
			rate	kHz, 48 kHz
				(MPEG1 L3)
				16 kHz, 22.05
				kHz, 24 kHz
				(MPEG2 L3)
				8kHz, 11.025
				kHz, 12 kHz
				(MPEG2.5 L3)

Viewing Movies

Play video files on display. Your display shows all of the video files saved in a USB storage device or shared folder on a PC.

1Press the navigation buttons to scroll to My Media and press OK.

2Press the navigation buttons to scroll to Movie List and press OK.

3Press the navigation buttons to scroll to a folder you want and press OK.

4Press the navigation buttons to scroll to a file you want and press OK.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

22 ENTERTAINMENT

6 Control playback by using the following buttons.

Movie List

Page 1/1

USB1 USB Drive

Drive1

Page 1/1

001

002

003

004

005

006

Move

Play

Page Change

Mark

01:02:30 / 02:30:25

To Photo list

Change Numbers

Mark Mode

Exit

Option

Hide

Exit

Movie List

Page 1/1

Mark Mode

USB1 USB Drive

Drive1

Page 1/1

001

002

003

004

005

006

051. Apple_ ......

02:30:25

Move

Mark

Page Change

Mark

Play Marked

Mark All

Unmark All

Exit Mark Mode

Exit

Menu

Description

Play Marked

Play the selected movie file.

Once a movie file finishes playing,

the next selected one will be played

automatically.

Mark All

Mark all movie files on the screen.

Unmark All

Deselect all marked movie files.

Exit Mark Mode

Exit the Mark Mode.

5 Play a movie.

NOTE

Button			Description
			Stops the playback
			Plays a video
			Pauses or resumes the playback
			Scans backward in a file
			Scans forward in a file
			Show the Option menu.
			Hide the menu on the full-sized screen.
			Return to Movie List.
			Skips to specific points in a file dur-
			ing playback. The time of a specific
	or		point will appear on the status bar. In
			some files, this function may not work
			properly.
ENERGY			Adjusts the screen brightness to save
SAVING			energy.

yyNon-supported files are displayed the preview image by icon only .

yyAbnormal files are displayed in the form of bitmap .

								ENTERTAINMENT 23
		Tips for Using Playing Video Files		yyWhen you are watching the movie by Movie
	yySome user-created subtitles may not work				List function, you can adjust an image by
					Energy Saving key on the remote control.
		properly.
					User setup for each image mode does not
	yySome special characters are not supported
					operate.
		in subtitles.
	yyHTML tags are not supported in subtitles.
	yySubtitles in languages other than the sup-
		ported languages are not available.
	yyThe screen may suffer temporary interrup-
		tions (image stoppage, faster playback, etc.)			Video Options
		when the audio language is changed.		1 Press MENU to access the Pop-Up menus.
	yyA damaged movie file may not be played			2 Press the Navigation buttons to scroll to Set
		correctly, or some player functions may not
		be usable.			Video Play., Set Video. or Set Audio. and
	yyMovie files produced with some encoders				press OK.
		may not be played correctly.
	yyIf the video and audio structure of recorded
		file is not interleaved, either video or audio is
						NOTE
		outputted.
	yyHD videos with a maximum of 1920 x 1080			yyOption values changed in Movie List does
		@ 25/30 P or 1280 x 720 @ 50/60 P are
					not affect Photo List and Music List.
		supported, depending on the frame.
				yyOption value changed in Photo List and Mu-
	yyVideos with resolutions higher than 1920
					sic List are changed likewise in Photo List
		X 1080 @ 25/30 P or 1280 x 720 @ 50/60			and Music List excluding Movie List.
		P may not work properly depending on the		yyWhen replaying the video file after stopping,
		frame.			you can play from where it stopped previ-
	yyMovie files other than the specified types and				ously.
		formats may not work properly.
	yyMax bitrate of playable movie file is 20 Mbps.
		(only, Motion JPEG : 10 Mbps)
	yyWe do not guarantee smooth playback of
		profiles encoded level 4.1 or higher in H.264/
		AVC.
	yyDTS Audio codec is not supported.
	yyA movie file more than 30 GB in file size is
		not supported for playback.
	yyA DivX movie file and its subtitle file must be
		located in the same folder.
	yyA video file name and its subtitle file name
		must be identical for it to be displayed.
	yyPlaying a video via a USB connection that
		doesn’t support high speed may not work
		properly.
	yyFiles encoded with GMC (Global Motion
		Compensation) may not be played.

<![if ! IE]>

<![endif]>ENGLISH