ENGLISH Easy Setup Guide
Please read this manual carefully before operating your set and retain it for future reference.
ESPAÑOL Guía Rápida de Configuración
Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
70UH6350, 70UH635T
AA
58UH6300 70UH6350, 70UH635T
X 4
(M4 X L14)
LED TV
50UH6300
50UH630T
58UH6300
70UH6350
70UH635T
50/58UH6300
50UH630T
50UH6300
50UH630T
X 4
(M4 X L16)
|
|
|
|
|
|
P/No: MFL69380016 (1602-REV01) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
www.lg.com |
ENGLISH Depending upon model |
|||||
ESPAÑOL Según el modelo |
|
ENGLISH Read Safety and Reference.
ESPAÑOL Leer Seguridad y Consultas.
50/58UH6300, 50UH630T
1 |
2 |
3 |
4 |
70UH6350, 70UH635T
1 |
2 |
3 |
4 |
X 4
(M4 X L8)
2-1 |
2-2 |
X 4
(M4 X L8)
5 |
6 |
50/58UH6300, 50UH630T
70UH6350, 70UH635T
1 |
2 |
3 |
4 |
<![endif]>*MFL69380016*
0 1 2
ENGLISH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50UH6300 |
|
|
|
|
70UH6350 |
|
||
|
|
|
MODELS |
(50UH6300-SA) |
|
|
58UH6300 |
|
(70UH6350-SA) |
|
||
|
|
|
50UH630T |
|
|
(58UH6300-SA) |
|
70UH635T |
|
|||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
(50UH630T-DA) |
|
|
|
|
(70UH635T-DA) |
|
|
|
Dimensions |
|
|
With stand (mm) |
1,122 x 717 x 231 |
|
|
1,298 x 828 x 258 |
|
1,572 x 971 x 282 |
|
|
|
(W x H x D) |
|
|
Without stand (mm) |
1,122 x 664 x 53.3 |
|
|
1,298 x 770 x 54.2 |
|
1,572 x 909 x 59.7 |
|
|
|
Weight |
|
|
With stand (kg) |
16.5 |
|
22.8 |
|
31.5 |
|
|
|
|
|
|
Without stand (kg) |
16.2 |
|
22.3 |
|
28.7 |
|
||
|
|
|
|
|
|
|
|
|||||
|
|
Power requirement |
|
|
|
|
AC 100 - 240 V ~ 50 / 60 Hz |
|
|
|||
|
|
Current value / |
|
|
|
1.5 A / 150 W |
|
|
1.8 A / 180 W |
|
2.6 A / 260 W |
|
|
|
Power consumption |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
ESPAÑOL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50UH6300 |
|
|
|
|
70UH6350 |
|
|
|
|
|
MODELOS |
(50UH6300-SA) |
|
|
58UH6300 |
|
(70UH6350-SA) |
|
||
|
|
|
50UH630T |
|
|
(58UH6300-SA) |
|
70UH635T |
|
|||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
(50UH630T-DA) |
|
|
|
|
(70UH635T-DA) |
|
|
|
Dimensiones |
|
Con base (mm) |
1 122 x 717 x 231 |
|
|
1 298 x 828 x 258 |
|
1 572 x 971 x 282 |
|
|
|
|
(Ancho x altura x |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
profundidad) |
|
Sin base (mm) |
1 122 x 664 x 53,3 |
|
|
1 298 x 770 x 54,2 |
|
1 572 x 909 x 59,7 |
|
|
|
|
Peso |
|
Con base (kg) |
16,5 |
|
|
22,8 |
|
31,5 |
|
|
|
|
|
Sin base (kg) |
16,2 |
|
|
22,3 |
|
28,7 |
|
||
|
|
|
|
|
|
|
||||||
|
|
Alimentación requerida |
|
AC 100 - 240 V ~ 50 / 60 Hz |
|
|
||||||
|
|
Corriente de consumo / Consumo de potencia |
1,5 A / 150 W |
|
|
1,8 A / 180 W |
|
2,6 A / 260 W |
|
OWNER’S MANUAL
Safety and Reference
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.
Please read this manual carefully before operating your TV and retain it for future reference.
43UH610T 43UH6110 43UH650T 50UH630T 43UH6500 49UH610T 43UH6100 49UH650T 70UH635T 49UH6500 55UH615T 49UH6110 55UH650T 50UH6300 55UH6500 60UH615T 49UH6100 60UH650T 58UH6300 60UH6500 65UH615T 55UH6150 65UH650T 70UH6350 65UH6500 49UH6000 60UH6150 75UH655T 75UH6550 55UH6050 65UH6150
*MFL69273702* |
www.lg.com |
P/No : MFL69273702 (1602-REV02)
<![endif]>ENGLISH
Important Safety Instructions
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
WARNING/CAUTION
RISKOFELECTRICSHOCK
DONOTOPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the device.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
The note helps you understand and use the product safely. Please read the note carefully before using the product.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
••Do not use this apparatus near water.
••Clean only with dry cloth.
••Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
••Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
••Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
••Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
••Only use attachments/accessories specified by the manufacturer.
••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
2
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
••Unplug this apparatus during lightning storms or when unused for long periods of time.
••Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
••Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.
••Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.
••Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
••CAUTION concerning the Power Cord (Can differ by country):
Check the specification page of this owner’s manual to be certain concerning current requirements. Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
••Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
••Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
<![endif]>ENGLISH
3
<![endif]>ENGLISH
••Grounding
-- (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet).
If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.
Power Supply
Circuit
Breaker
••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
••Outdoor Antenna Grounding
-- (Can differ by country):
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna
system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
|
|
|
|
|
|
|
|
|
|
|
Antenna Lead in Wire |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Antenna Discharge Unit |
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-20) |
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
||
Electric Service Equipment |
|
|
|
|
Grounding Conductor |
||||||
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-21) |
Ground Clamp |
|
|
Power Service Grounding |
||||||||
|
|
|
|
|
|
|
|
|
|
|
Electrode System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NEC: National Electrical Code |
|
|
(NEC Art 250, Part H) |
••Cleaning
-- When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.
••Moving
-- Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
••Ventilation
-- Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged in. Do not install in excessively dusty places.
••If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.
••Keep the product away from direct sunlight.
••Never touch this apparatus or antenna during a lightning storm.
••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
••Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.
••DISCONNECTING THE DEVICE FROM THE MAIN
POWER
The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
••Make sure the power cord is connected securely to the power plug on the TV.
••Batteries
-- Store the accessories (battery, etc.) in a safe location out of the reach of children.
••This apparatus uses batteries. In your community there might be regulations that require you
to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
••Do not dispose of batteries in a fire.
••Do not short circuit, disassemble, or allow the batteries to overheat.
4
••Do not use high voltage electrical equipment near the TV, (e.g., a bug zapper).
This may result in product malfunction.
••Dot Defect
-- This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability
of the TV.
••Generated Sound
-- Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
-- Electrical circuit humming/panel buzzing
A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product.
This generated sound does not affect the performance and reliability of the product.
••Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.
••Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
••If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some
minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
••Displaying a still image for a prolonged time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.
Viewing 3D Imaging
(For 3D models)
CAUTION
••Guardians should not leave children unsupervised who are watching a 3D video. Guardians should make children stop watching the video and take a rest if they experience eye fatigue, headache, or dizziness.
••When viewing a 3D video, some may experience discomfort such as a headache, dizziness, fatigue, or blurred vision. In this case, stop watching the 3D video and take a rest.
••If you watch a 3D video for a long time, you may experience eye fatigue. In this case, stop watching the 3D video and take a rest.
••Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
••Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles. Place the 3D glasses over your normal eye ware.
••Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
••Do not use the 3D glasses while walking or moving around. It may cause an accident or injury.
••Be careful not to poke your eye with the frames of the 3D glasses.
••Do not watch 3D content if you have photosensitive seizures, epilepsy, or heart disease.
<![endif]>ENGLISH
5
Preparing
NOTE
|
••When the TV is turned on for the first time after |
||
|
being shipped from the factory, initialization of |
||
|
the TV may take approximately one minute. |
||
|
••Image shown may differ from your TV. |
||
|
••Your TV’s OSD (On Screen Display) may differ |
||
|
slightly from that shown in this manual. |
||
|
••The available menus and options may differ from |
||
|
the input source or product model that you are |
||
|
using. |
|
|
|
••New features may be added to this TV in the |
||
|
future. |
|
|
|
••The items supplied with your product may vary |
||
|
depending upon the model. |
||
|
••Product specifications or contents of this manual |
||
|
may be changed without prior notice due to |
||
|
upgrade of product functions. |
||
|
••For an optimal connection, HDMI cables and |
||
|
USB devices should have bezels less than 10 mm |
||
|
thick and 18 mm width. |
||
|
••Use an extension cable that supports USB 2.0 if |
||
|
the USB cable or USB flash drive does not fit into |
||
<![if ! IE]> <![endif]>ENGLISH |
your TV’s USB port. |
|
|
••Use a certified cable with the HDMI logo |
|||
|
|||
|
attached. If you do not use a certified HDMI |
||
|
cable, the screen may not display or a |
||
|
connection error may occur. |
||
|
••Recommended HDMI cable types (3 m or less) |
||
|
-- High-Speed HDMI®/TM cable |
||
|
-- High-Speed HDMI ®/TM cable with Ethernet |
||
|
A |
A |
|
|
*A |
10 mm |
|
|
*B |
18 mm |
|
|
••How to use the ferrite core |
||
|
(Depending upon model) |
||
|
-- Use the ferrite core to reduce the |
||
|
electromagnetic interference in the power |
||
|
cable. Wind the power cable on the ferrite core |
||
|
once. |
|
|
|
[Cross Section of Ferrite Core] |
||
|
[to a wall plug] |
[to the TV] |
10 cm (+/- 2 cm)
••Antenna Isolator Installation Guide (Depending upon model)
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV.
Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
Wall |
1. Connect to TV |
|
|
|
or |
Cable / |
Isolator |
Antenna |
|
|
2. Connect to Set-Top box |
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with
a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 6072811)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
6