Please read this manual carefully before operating
your set and retain it for future reference.
LA79**
LA86**
LA96**
LA97**
LA98**
*MFL67706412*
www.lg.com
P/NO : MFL67706412 (1403-REV12)
Printed in Korea
TABLE OF CONTENTS
2
ENGLISH
TABLE OF CONTENTS
ENG
3 SAFETY INSTRUCTIONS
8 Viewing 3D Imaging (Only 3D models)
9 INSTALLATION PROCEDURE
9 ASSEMBLING AND PREPARING
9 Unpacking
13 Separate purchase
14 Parts and buttons
16 Lifting and moving the TV
17 Setting up the TV
17 - Attaching the stand
20 Mounting on a table
21 Mounting on a wall
23 Tidying cables
24 Using Sliding Speaker
24 Using Built-in Camera
25 - Preparing Built-in Camera
25 - Name of Parts of Built-in Camera
25 - Checking the Camera’s Shooting
Range
26 MAKING CONNECTIONS
26 Antenna connection
27 HDMI connection
27 Headphone connection
28 DVI to HDMI connection
28 Component connection
29 Composite connection
29 Audio connection
29 - Digital optical audio connection
30 USB connection
30 MHL connection
37 MAINTENANCE
37 Cleaning your TV
37 - Screen, frame, cabinet and stand
37 - Power cord
37 TROUBLESHOOTING
38 ENVIRONMENTAL INFORMATION
38 WEEE
39 SPECIFICATIONS
46 LICENSES
46 OPEN SOURCE SOFTWARE
NOTICE
46 EXTERNAL CONTROL DEVICE
SETUP
WARNING
yIf you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
31 REMOTE CONTROL
33 MAGIC REMOTE CONTROL
FUNCTIONS
35 Registering Magic Remote Control
35 How to use Magic Remote Control
35 Precautions to Take when Using the
Magic Remote Control
36 USING THE USER GUIDE
CAUTION
yIf you ignore the caution message, you
may be slightly injured or the product may
be damaged.
NOTE
yThe note helps you understand and use
the product safely. Please read the note
carefully before using the product.
SAFETY INSTRUCTIONS
3
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Insert power cable plug completely into
Do not place the TV and/or remote control
y
in the following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a
bathroom
- Near any heat source such as stoves
and other devices that produce heat
- Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
Do not place the product where it might be
y
exposed to dust.
This may cause a fire hazard.
Mains Plug is the TV connecting/
y
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
y
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.
Ensure the power cord does not come into
y
contact with hot objects such as a heater.
This may cause a fire or an electric shock
hazard.
Do not place a heavy object, or the
y
product itself, on power cables.
Otherwise, this may result in fire or electric
shock.
Bend antenna cable between inside and
y
outside building to prevent rain from
flowing in.
This may cause water damaged inside the
Product and could give an electric shock.
ENGENGLISH
Do not touch the power plug with wet
y
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
Make sure to connect Mains cable to
y
compliant AC mains socket with Grounded
earth pin. (Except for devices which
are not grounded on earth.) Otherwise
possibility you may be electrocuted or
injured.
When mounting TV onto wall make sure to
y
neatly install and isolate cabling from rear
of TV as to not create possibility of electric
shock /fire hazard.
Do not plug too many electrical devices
y
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
4
Desiccant
ENGLISH
ENG
SAFETY INSTRUCTIONS
Do not drop the product or let it fall over
y
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
Keep the anti-moisture packing material or
y
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
Do not let your children climb or cling onto
y
the TV. Otherwise, the TV may fall over,
which may cause serious injury.
Dispose of used batteries carefully
y
to ensure that a small child does not
consume them. Please seek DoctorMedical Attention immediately if child
consumes batteries.
Do not drop metallic objects such as
y
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service centre.
Do not spray water on the product or
y
scrub with an inflammable substance
(thinner or benzene). Fire or electric shock
accident can occur.
Do not allow any impact, shock or any
y
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.
Never touch this product or antenna
y
during a thunder or lighting storm.
You may be electrocuted.
Do not insert any metal objects/conductors
y
(like a metal chopstick/cutlery/screwdriver)
between power cable plug and input Wall
Socket while it is connected to the input
terminal on the wall. Additionally, do not
touch the power cable right after plugging
into the wall input terminal. You may be
Never touch the wall outlet when there is
y
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
electrocuted. (Depending on model)
Do not disassemble, repair or modify the
y
Do not put or store inflammable
y
substances near the product. There is a
danger of combustion/explosion or fire due
to careless handling of the inflammable
substances.
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
SAFETY INSTRUCTIONS
5
If any of the following occur, unplug the
y
product immediately and contact your
local service centre.
- The product has been impacted by
shock
- The product has been damaged
- Foreign objects have entered the
product
- The product produced smoke or a
strange smell
This may result in fire or electric shock.
Unplug the TV from AC mains wall socket
y
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.
Apparatus shall not be exposed to dripping
y
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
CAUTION
Install the product where no radio wave
y
occurs.
If you install the TV on a stand, you need
y
to take actions to prevent the product from
overturning. Otherwise, the product may
fall over, which may cause injury.
If you intend to mount the product to a
y
wall, attach VESA standard mounting
interface (optional parts) to the back of the
product. When you install the set to use
the wall mounting bracket (optional parts),
fix it carefully so as not to drop.
Only use the attachments / accessories
y
specified by the manufacturer.
When installing the antenna, consult with a
y
qualified service technician. If not installed
by a qualified technician, this may create
a fire hazard or an electric shock hazard.
We recommend that you maintain a
y
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
Only use the specified type of battery.
y
This could cause damage to the remote
control.
ENGENGLISH
There should be enough distance between
y
an outside antenna and power lines to
keep the former from touching the latter
even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such
y
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
Do not mix new batteries with old
y
batteries. This may cause the batteries to
overheat and leak.
Batteries should not be exposed to
y
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
Do not place non-rechargeable batteries
y
in charging device.
Make sure there are no objects between
y
the remote control and its sensor.
SAFETY INSTRUCTIONS
6
ENGLISH
ENG
interrupted due to external/internal lighting
eg Sunlight, fluorescent lighting.If this
occurs turn off lighting or darken viewing
area.
When connecting external devices such
y
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.
Do not turn the product On/Off by
y
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.
Please follow the installation instructions
y
below to prevent the product from
overheating.
- The distance between the product and
the wall should be more than 10 cm.
- Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).
- Do not install the product on a carpet or
cushion.
- Make sure the air vent is not blocked by
a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation
y
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
Signal from Remote Control can be
y
Prevent dust collecting on the power plug
y
pins or outlet.
This may cause a fire hazard.
Protect the power cord from physical or
y
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.
Do not press strongly upon the panel with
y
a hand or sharp object such as nail, pencil
or pen, or make a scratch on it, as it may
cause damage to screen.
Avoid touching the screen or holding your
y
finger(s) against it for long periods of time.
Doing so may produce some temporary or
permanent distortion/damage to screen.
When cleaning the product and its
y
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
Periodically examine the cord of your
y
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.
As long as this unit is connected to the AC
y
wall outlet, it is not disconnected from the
AC power source even if you turn off this
unit by SWITCH.
SAFETY INSTRUCTIONS
7
When unplugging the cable, grab the plug
y
and unplug it, by pulling at the plug. Don’t
pull at the cord to unplug the power cord
from the power board, as this could be
hazardous.
When moving the product, make sure
y
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.
When moving or unpacking the product,
y
work in pairs because the product is
heavy.
Otherwise, this may result in injury.
Contact the service centre once a year to
y
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
Refer all servicing to qualified service
y
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
If the product feels cold to the touch, there
y
may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong
with product.
The panel is a high technology display
y
product with resolution of two million to six
million pixels. You may see tiny black dots
and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel.
This does not indicate a malfunction and
does not affect the performance and
reliability of the product.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
You may find different brightness and
y
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.
Displaying a still image (e.g., broadcasting
y
channel logo, on-screen menu, scene from
a video game) for a prolonged time may
cause damage to the screen, resulting
in retention of the image, which is known
as image sticking. The warranty does not
cover the product for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more hours
for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
Generated Sound
y
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to tempera-ture and humidity. This
noise is common for products where
thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level
noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depend-ing on the product.
This generated sound does not affect the
performance and reliability of the product.
ENGENGLISH
SAFETY INSTRUCTIONS
8
ENGLISH
Viewing 3D Imaging (Only 3D
ENG
models)
WARNING
Viewing Environment
yViewing Time
- When watching 3D contents, take 5 15 minute breaks every hour. Viewing
3D contents for a long period of time
may cause headache, dizziness,
fatigue or eye strain.
Those that have a photosensitive
seizure or chronic illness
ySome users may experience a seizure or
other abnormal symptoms when they are
exposed to a ashing light or particular
pattern from 3D contents.
yDo not watch 3D videos if you feel nausea,
are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or
blood pressure disease, etc.
y3D Contents are not recommended to
those who suffer from stereo blindness
or stereo anomaly. Double images or
discomfort in viewing may be experienced.
yIf you have strabismus (cross-eyed),
amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
yIf your eyesight varies between your right
and left eye, revise your eyesight prior to
watching 3D contents.
CAUTION
Viewing Environment
Viewing Distance
y
- Maintain a distance of at least twice the
screen diagonal length when watching
3D contents. If you feel discomfort in
viewing 3D contents, move further away
from the TV.
Viewing Age
yInfants/Children
- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.
- Children under the age of 10 may
overreact and become overly excited
because their vision is in development
(for example: trying to touch the
screen or trying to jump into it. Special
monitoring and extra attention is
required for children watching 3D
contents.
- Children have greater binocular
disparity of 3D presentations than adults
because the distance between the eyes
is shorter than one of adults. Therefore
they will perceive more stereoscopic
depth compared to adults for the same
3D image.
yTeenagers
- Teenagers under the age of 19 may
react with sensitivity due to stimulation
from light in 3D contents. Advise them
to refrain from watching 3D contens for
a long time when they are tired.
yElderly
- The elderly may perceive less 3D
effect compared to the youth. Do not sit
closer to the TV than the recommended
distance.
Symptoms which require discontinuation
or refraining from watching 3D contents
yDo not watch 3D contents when you feel
fatigue from lack of sleep, overwork or
drinking.
yWhen these symptoms are experienced,
stop using/watching 3D contents and get
enough rest until the symptom subsides.
- Consult your doctor when the
symptoms persist. Symptoms may
include headache, eyeball pain,
dizziness, nausea, palpitation,
blurriness, discomfort, double image,
visual inconvenience or fatigue.
Cautions when using the 3D glasses
Make sure to use LG 3D glasses. Otherwise,
y
you may not be able to view 3D videos
properly.
Do not use 3D glasses instead of your
y
normal glasses, sunglasses or protective
goggles.
Using modied 3D glasses may cause eye
y
strain or image distortion.
Do not keep your 3D glasses in extremely
y
high or low temperatures. It will cause
deformation.
The 3D glasses are fragile and are easy
y
to be scratched. Always use a soft, clean
piece of cloth when wiping the lenses. Do
not scratch the lenses of the 3D glasses
with sharp objects or clean/wipe them with
chemicals.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
<
<
9
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you
are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
ENGENGLISH
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
A
B
*A
10 mm
=
*B
18 mm
A
=
10
ENGLISH
ENG
ENERGY
SAVING
ASSEMBLING AND PREPARING
AV MODE
INPUT
TV
123
456
7809
FLASHBK
LIST
MARK
FAV
PAG
3D
CHVOL
E
MUTE
INFO
MENU
Q.MENU
ENTER
EXIT
BACK
L/R SELECT
FREEZE
RATIO
P
or
Remote control,
batteries (AAA)
The remote control
will not be included
for all sales market.
(Depending on model)
(See p. 31, 32)
Dual play glasses
(Depending on model)
Tag On
Tag on
(Depending on model)
Magic remote
control, batteries
(AA)
(Depending on model)
(See p. 33, 34)
Cinema 3D Glasses
The number of 3D
glasses may differ
depending on the
model or country.
or
Isolator
(Depending on model)
(See p. 12)
Owner’s manualPower Cord
(Depending on model)
Component video
cable
(See p. 28)
Composite video
cable
(See p. 28, 29)
Cable holder
(Depending on
model)
(See p. 23)
Cable Management
2EA
(Only LA79**)
(See p. 23)
ASSEMBLING AND PREPARING
11
ENGENGLISH
Stand Screws
8EA, M4 x L14
(Only LA79**)
4EA, M4 x L14
(Only LA965*,
55LA97**)
(See p. 17, 18)
Stand Base/ Stand
Body
(Only LA79**)
(See p. 17)
Stand Base
(Only LA965*)
(See p. 18)
Stand Screws
4EA, M4 x L16
(Only LA86**)
(See p. 17)
Stand Base
(Only LA86**,
LA960*)
(See p. 17)
Wall mount inner
spacers
4EA
(Only LA97**)
(See p. 22)
Stand Screws
4EA, M4 x L20
(Only LA960*,
LA98**)
(See p. 17, 19)
Stand Base
(Only LA97**)
(See p. 18)
Wall mount screws
4EA, M6 x L54
(Only 55LA97**)
(See p. 22)
Stand Screws
6EA, M5 x L16
(Only LA98**)
(See p. 19)
Stand Base/ Stand
Body
(Only LA98**)
(See p. 19)
Wall mount screws
4EA, M8 x L44
(Only 65LA97**)
(See p. 22)
ASSEMBLING AND PREPARING
12
ENGLISH
ENG
Video call camera
(Only 70LA86**)
NOTE
yAntenna Isolator Installation Guide
- Use this to install TV in a place where there is a voltage difference between TV Set and GND
of antenna signal.
»If there is a voltage difference between TV Set and GND of antenna signal, the antenna
contact might be heated and excessive heat might cause an accident.
- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the
wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
- Before starting, be sure that the TV antenna is connected.
Wall
1. Connect to TV.
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a
cable distribution system using coaxial cable, may in some circumstances create a re hazard.
Connection to a cable distribution system has therefore to be provided through a device providing
electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING
13
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
P
AG-F***DP
Dual play glasses
AN-VC5**
Video call camera
Compatibility
AG-F***
Cinema 3D glasses
AN-MR400
Magic remote
Tag On
LG Audio deviceTag on
LA79**, LA965*, LA98**LA86**LA960*, LA97**
ENGENGLISH
AG-F***DP
Dual play glasses
AG-F***
Cinema 3D glasses
AN-MR400
Magic remote
AN-VC5**
Video call camera
LG Audio device
Tag on
•••
•••
•••
•
•
(Depending on
model)
•••
•••
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING
SETTINGS
INPUT
OK
SETTINGS
INPUT
OK
SETTINGS
INPUT
OK
14
Parts and buttons
ENGLISH
ENG
A type : LA79**
B type : LA86**, LA960*
Screen
Screen
Speakers
Remote control sensor
LG Logo light
Built-in Camera
(Only 42/47/55/60LA86**,
LA960*)
Buttons
Buttons
C type : LA965*
Speakers
Remote control sensor
LG Logo light
Screen
Remote control sensor
Power Indicator
Speakers
Buttons
ASSEMBLING AND PREPARING
H
H
H
SETTINGS
INPUT
OK
SETTINGS
INPUT
OK
15
D type : LA97**
E type : LA98**
Screen
Speakers
Screen
LG Logo light
Remote control and
Intelligent
Built-in Camera
Remote control sensor
Power Indicator
Speakers
1
sensors
Buttons
ENGENGLISH
Buttons
ButtonDescription
Scrolls through the saved programmes.
Adjusts the volume level.
Selects the highlighted menu option or confirms an input.
SAccesses the main menu, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
CAUTION
yTo avoid possible SPEAKER damage or
degradation in performance please keep
contact of TV/Speaker out of reach of
Children. (Only LA965*)
NOTE
yYou can set the LG Logo light to on or off
by selecting OPTION in the main menus.
(Depending on model)
ASSEMBLING AND PREPARING
16
Lifting and moving the TV
ENGLISH
ENG
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
CAUTION
yAvoid touching the screen at all times, as
this may result in damage to the screen.
yIt is recommended to move the TV in the
box or packing material that the TV originally
came in.
yBefore moving or lifting the TV, disconnect
the power cord and all cables.
yWhen holding the TV, the screen should face
away from you to avoid damage.
yWhen transporting a large TV, there should
be at least 2 people.
yWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
yWhen transporting the TV, do not expose the
TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yDo not apply excessive pressure to cause
exing /bending of frame chassis as it may
damage screen.
yHold the top and bottom of the TV frame
rmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING
17
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
LA79**
1
Stand Body
Front
Stand Base
2
LA86**, LA960*
ENGENGLISH
1
M4 x L14
4EA
Stand Base
2
3
3
M4 x L14
4EA
M4 x L16, 4EA
(Only LA86**)
M4 x L20, 4EA
(Only LA960*)
ASSEMBLING AND PREPARING
18
LA965*
ENGLISH
ENG
1
Stand Base
2
12
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
NOTE
yBe sure to attach the upper mounting
hole first, and then attach the lower
connection second.
LA97**
1
Stand Base
2
3
3
M4 x L14
4EA
NOTE
M4 x L14
4EA
yThe stand screws are already attached
at the back of the TV. Please use these
attached screws to assemble the TV and
stand. (Only 65LA97**)
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.