LG 70LA860T Owner's Manual

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set
and retain it for future reference.

47LA8600
60LA8600

47LA860T
60LA860T
70LA860T

55LA960T

P/NO : MFL67653104 (1309-REV02)

www.lg.com

IMPORTANT SAFETY INSTRUCTIONS

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

2

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.

Read these instructions.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE
PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle,

is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.

ENGLISH

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.

Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

y

Clean only with a dry cloth.

y

Do not block any ventilation openings. Install

y

in accordance with the manufacturer’s
instructions.

Do not install near any heat sources such

y

as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

WARNING

If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.

CAUTION

If you ignore the caution message, you may
be slightly injured or the product may be
damaged.

NOTE

The note helps you understand and use
the product safely. Please read the note
carefully before using the product.

Do not defeat the safety purpose of the

y

polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does
not fit into your outlet, consult an electrician
for replacement of the obsolete outlet (Can
differ by country).

IMPORTANT SAFETY INSTRUCTIONS

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

3

Do not press strongly upon the panel with a

y

hand or a sharp object such as a nail, pencil
or pen, or make a scratch on it.

Protect the power cord from being

y

walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

Only use attachments/accessories specified

y

by the manufacturer.

Use only with a cart, stand, tripod, bracket,

y

or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.

Unplug this apparatus during lightning

y

storms or when unused for long periods of
time.

Refer all servicing to qualified service

y

personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.

Do not stick metal objects or any other

y

conductive material into the power cord. Do
not touch the end of the power cord while
it is plugged in.
Keep the packing anti-moisture material or

y

vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
CAUTION concerning the Power Cord

y

(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification
page of this owner’s manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result
in fire or electric shock. Do not overload
wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any
of these conditions could result in electric
shock or fire. Periodically examine the cord
of your appliance, and if its appearance
indicates damage or deterioration, unplug
it, discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized service.
Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance. Do not move the TV with
the power cord plugged in. Do not use a
damaged or loose power cord. Be sure do
grasp the plug when unplugging the power
cord. Do not pull on the power cord to
unplug the TV.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

4

Warning

y

- To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.

Do not expose to dripping or splashing

y

and do not place objects filled with liquids,
such as vases, cups, etc. on or over the
apparatus (e.g. on shelves above the unit).

Grounding

y

(Except for devices which are not
grounded.)
Ensure that you connect the earth ground

ENGLISH

wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not
try to ground the unit by connecting it to
telephone wires, lightening rods, or gas
pipes.

Short-circuit

Breaker

As long as this unit is connected to the AC

y

wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.
Do not attempt to modify this product in

y

any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate
this product.

Outdoor Antenna Grounding

y

(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric
light or power circuits, or where it can
come in contact with such power lines or

Power Supply

circuits as death or serious injury can occur.
Be sure the antenna system is grounded
so as to provide some protection against
voltage surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information
with respect to proper grounding of the
mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to
grounding electrodes and requirements for
the grounding electrode.

Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Ground Clamp

Electric Service

Equipment

Ground Clamp

Cleaning

y

NEC: National Electrical Code

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)

When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.

Moving

y

Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.

Ventilation

y

Install your TV where there is proper
ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product
with cloth or other materials while plugged.
Do not install in excessively dusty places.
If you smell smoke or other odors coming

y

from the TV, unplug the power cord and
contact an authorized service center.
Keep the product away from direct sunlight.

y

Never touch this apparatus or antenna

y

during a thunder or lightning storm.
When mounting a TV on the wall, make

y

sure not to install the TV by hanging the
power and signal cables on the back of the
TV.
Do not allow an impact shock or any objects

y

to fall into the product, and do not drop
anything onto the screen.

IMPORTANT SAFETY INSTRUCTIONS

5

Disconnecting the Main Power

y

The power outlet used with this device
must remain easily accessible.
Store the accessories (battery, etc.) in a

y

safe location out of the reach of children.
This apparatus use batteries. In your

y

community there might be regulations
that require you to dispose of these
batteries properly due to environmental
considerations. Please contact your
local authorities for disposal or recycling
information.
Do not dispose of batteries in a fire.

y

Do not short circuit, disassemble or allow

y

the batteries to overheat.

Dot Defect

y

The Plasma or LCD panel is a high
technology product with resolution of
two million to six million pixels. In a very
few cases, you could see fine dots on the
screen while you’re viewing the TV. Those
dots are deactivated pixels and do not
affect the performance and reliability of the
TV.

Generated Sound

y

“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This
noise is common for products where
thermal deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high­speed switching circuit, which supplies
a large amount of current to operate a
product. It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation

y

openings. When watching the TV for
a long period, the ventilation openings
may become hot. This does not affect
the performance of the product or cause
defects in the product.
If the TV feels cold to the touch, there

y

may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong
with TV. Some minute dot defects may be
visible on the screen, appearing as tiny red,
green, or blue spots. However, they have
no adverse effect on the TV’s performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods
of time. Doing so may produce some
temporary distortion effects on the screen.

Preventing “Image burn” or “Burn-in” on
your TV screen

If a fixed image displays on the TV screen

y

for a long period of time, it will be imprinted
and become a permanent disfigurement on
the screen. This is “image burn” or “burn­in” and not covered by the warranty.
If the aspect ratio of the TV is set to 4:3

y

for a long period of time, image burn may
occur on the letterboxed area of the screen.
Avoid displaying a fixed image on the TV

y

screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

6

Viewing 3D Imaging

WARNING

Viewing Environment

Viewing Time

y

- When watching 3D content, take 5 - 15
minute breaks every hour. Viewing 3D
content for a long period of time may
cause headache, dizziness, fatigue or eye
strain.

Those that have a photosensitive seizure
or chronic illness

Some users may experience a seizure or other

y

abnormal symptoms when they are exposed
to a flashing light or particular pattern from 3D
content.
Do not watch 3D videos if you feel nauseous,

y

are pregnant and/ or have a chronic illness such

ENGLISH

as epilepsy, cardiac disorder, or blood pressure
disease, etc.
3D Content is not recommended for those

y

who suffer from stereo blindness or stereo
anomaly. Double images or discomfort in
viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia

y

(weak eyesight) or astigmatism, you may have
trouble sensing depth and easily feel fatigue
due to double images. It is advised to take
frequent breaks than the average adult.
If your eyesight varies between your right and

y

left eye, revise your eyesight prior to watching
3D content.

CAUTION

Viewing Environment

Viewing Distance

y

- Maintain a distance of at least twice the
screen diagonal length when watching 3D
content. If you feel discomfort in viewing
3D content, move further away from the
TV.

Viewing Age

Infants / Children

y

- Usage/ Viewing 3D content for children
under the age of 5 are prohibited.

- Children under the age of 10 may overreact
and become overly excited because their
vision is in development (for example: trying
to touch the screen or trying to jump into
it. Special monitoring and extra attention is
required for children watching 3D content.

- Children have greater binocular disparity of
3D presentations than adults because the
distance between the eyes is shorter than
one of adults. Therefore they will perceive
more stereoscopic depth compared to
adults for the same 3D image.

Teenagers

y

- Teenagers under the age of 19 may be
stimulated to light coming from 3D videos.
Advise them not to watch 3D videos for a
long time when they are tired.

Elderly

y

- The elderly may perceive less of a 3D
effect than the youth. Do not sit closer to
the TV than the recommended distance.

Symptoms which require discontinuation
or refraining from watching 3D content

Do not watch 3D content when you feel

y

fatigue from lack of sleep, overwork or
intoxication.
When these symptoms are experienced, stop

y

using/watching 3D content and get enough
rest until the symptom subsides.

- Consult your doctor when the symptoms
persist. Symptoms may include headache,
eyeball pain, dizziness, nausea, palpitation,
blurriness, discomfort, double image, visual
inconvenience or fatigue.

Cautions when using the 3D glasses

Only use LG 3D glasses. Otherwise, you may

y

not be able to view 3D videos properly.
Do not use 3D glasses instead of your normal

y

glasses, sunglasses or protective goggles.
Using modified 3D glasses may cause eye

y

strain or image distortion.
Do not keep your 3D glasses in extremely

y

high or low temperatures. It will cause
deformation.
The 3D glasses are fragile and are easy to

y

scratched. Use a soft, clean piece of cloth
when wiping the lenses. Do not scratch the
lenses of the 3D glasses with sharp objects
or clean/wipe them with chemicals.

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’.

Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”

7

ENGLISH

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS

2.0+Digital Out is a trademark of DTS, Inc. Product includes software. ©
DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit ‘http://opensource.lge.com’.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to ‘[e-mail]’. This offer is valid for three (3) years from the date on which you purchased
the product.

TABLE OF CONTENTS

8

TABLE OF CONTENTS

2 IMPORTANT SAFETY INSTRUCTIONS

6 Viewing 3D Imaging

7 LICENSES

7 OPEN SOURCE SOFTWARE NOTICE

8 TABLE OF CONTENTS

9 INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking

11 Optional Extras

12 Parts and Buttons

ENGLISH

13 Lifting and moving the TV

14 Setting up the TV

14 - Attaching the stand

15 - Mounting on a table

16 - Tidying cables

17 - Mounting on a wall

18 Using Built-in Camera

19 - Preparing Built-in Camera

19 - Name of Parts for the Built-In Camera

19 - Checking the Camera’s Shooting Range

31 MAGIC REMOTE CONTROL

FUNCTIONS

32 Registering Magic Remote Control

32 How to use Magic Remote Control

32 Precautions to Take when Using the Magic

Remote Control

33 WATCHING TV

33 Turning the TV on for the First Time

34 USING THE USER GUIDE

35 SPECIFICATIONS

41 EXTERNAL CONTROL DEVICE SETUP

42 MAINTENANCE

42 Cleaning Your TV

42 - Screen, Frame, Cabinet and Stand

42 - Power Cord

42 TROUBLESHOOTING

20 MAKING CONNECTIONS

20 Connecting to an Antenna or Cable

21 Connecting to a HD Receiver, DVD Player or

VCR

21 - HDMI Connection

22 - DVI to HDMI Connection

23 - Connecting to a Mobile Phone

24 - Component Connection

25 - Composite Connection

26 Connecting a PC

26 - HDMI Connection or DVI to HDMI

Connection

28 Connecting to an Audio System

28 - Digital Optical Audio Connection

29 Connecting Headphones

30 Connecting a USB Device

NOTE

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may

y

differ slightly from that shown in this
manual.
The available menus and options may

y

differ from the input source or product
model that you are using.
New features may be added to this TV in

y

the future.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

1

Attach the stand to the TV set.

2

Connect an external device to the TV set.

3

Make sure the network connection is available.

4

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

Some models appear to have a thin film on the screen. It is actually part of the screen, do not

y

remove it.

9

ENGLISH

NOTE

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

y

upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

y

thick and 18 mm width.
Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not

y

fit into your TV's USB port.

B

A

A

B

*A 10 mm

*B 18 mm

ASSEMBLING AND PREPARING

10

Magic Remote Control,
Batteries (AA)

(See p. 31)

Cable Holder

(See p. 16)

(For LA960T series)

ENGLISH

Stand Screws

4 EA, M4 x 20
(See p. 14)

Power Cord Owner’s Manual

(For LA8600, LA860T series)

Stand Base

(See p. 14)

Stand Screws

4 EA, M4 x 16
(See p. 14)

Cinema 3D Glasses

The number of 3D glasses
may differ depending on the
model or country.

Dual Play glasses

The number of Dual
play glasses may differ
depending on the model or
country.
(Depending on model)

(For 70LA860T)

Component video cable

(See p. 24)

Tag On

Tag On

(Depending on model)

Composite video cable

(See p. 24, 25)

Video Call Camera

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.

11

AN-MR400

Magic Remote

LG Audio device Tag On AN-BL***

AG-F***

Cinema 3D Glasses

Tag On

AG-F***DP

Dual Play Glasses

Wireless IR Blaster
(Depending on model)

ENGLISH

ASSEMBLING AND PREPARING

SETTINGS

INPUT

OK

SETTINGS

INPUT

OK

12

Parts and Buttons

Video call camera

Screen

(For 70LA860T)(For 47/60LA8600, 47/60LA860T, 55LA960T)

Screen

ENGLISH

/ ( / )

/ ( / )

(OK )

(

(

( )

Speakers

Remote control sensor

Logo light

Button Description

Scrolls through the saved channels.

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.

Buttons

SETTINGS

INPUT

)

)

Accesses the main menus, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

Speakers

Buttons

Remote control sensor

Logo light

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.

CAUTION

Avoid touching the screen at all times, as

y

this may result in damage to the screen.
Do not place the product on the floor with

y

its front facing down. Doing so may result
in damage to the screen.

It is recommended to move the TV in

y

the box or packing material that the TV
originally came in.
Before moving or lifting the TV, disconnect

y

the power cord and all cables.
When holding the TV, the screen should

y

face away from you to avoid damage.

Hold the top and bottom of the TV

y

frame firmly. Make sure not to hold the
transparent part, speaker, or speaker grill
area.

ASSEMBLING AND PREPARING

When transporting a large TV, there should

y

be at least 2 people.
When transporting the TV by hand, hold the

y

TV as shown in the following illustration.

When transporting the TV, do not expose

y

the TV to jolts or excessive vibration.
When transporting the TV, keep the TV

y

upright, never turn the TV on its side or tilt
towards the left or right.

13

ENGLISH

ASSEMBLING AND PREPARING

14

Setting up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

When attaching the stand to the TV set, place the screen facing down on a cushioned table or

y

flat surface to protect the screen from scratches.
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the

y

TV may tilt forward after being installed.)
Do not tighten the screws with too much force; otherwise they may be damaged and come

y

loose later.

NOTE

Remove the stand before installing the TV on a wall mount by performing the stand attachment

y

in reverse.

ENGLISH

2

3

Wrapping bag
(Depending on model)

Front

Stand Base

41

(For LA8600, LA860T series)
M4 x 16
2 EA

(For LA960T series)
M4 x 20
2 EA

(For LA8600, LA860T series)
M4 x 16
2 EA

(For LA960T series)
M4 x 20
2 EA

ASSEMBLING AND PREPARING

15

Mounting on a table

Lift and tilt the TV into its upright position on

1

a table.

- Leave a 10 cm (minimum) space from the
wall for proper ventilation.

10 cm

10 cm

Connect the power cord to a wall outlet.

2

10 cm

10 cm

CAUTION

Do not place the TV near or on sources

y

of heat, as this may result in fire or other
damage.

Adjusting the angle of the TV to suit view

Swivel 10 degrees to the left or right and adjust
the angle of the TV to suit your view.
(For 47LA8600, 47LA860T)

10˚10˚

Swivel 8 degrees to the left or right and adjust
the angle of the TV to suit your view.
(For 60LA8600, 60LA860T)

8˚8˚

CAUTION

Install the product on a flat surface for

y

easy swivel. Make sure to use the TV
cabinet or stand that can properly support
the TV.
After installing the TV, the angle of the

y

screen can be adjusted to the left or right.
When adjusting the angle, make sure

y

there are no objects near the TV and the
TV has enough distance from the wall. A
space of at least 5 cm on the front and
10 cm on the back should be available.
Otherwise, the product could fall due
to balance problems, which may cause
personal injury or damage to the product.

ENGLISH

ASSEMBLING AND PREPARING

16

Securing the TV to a wall (optional)

(Depending on model)

Insert and tighten the eye-bolts, or TV

1

brackets and bolts on the back of the TV.

ENGLISH

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

Mount the wall brackets with the bolts to

2

the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.

Tidying cables

Gather and bind the cables with the cable

1

holder on the back of the TV.

Cable Holder

Gather and bind the cables with the cable

2

management clip.

Connect the eye-bolts and wall brackets

3

tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.

CAUTION

Make sure that children do not climb on or

y

hang on the TV.

NOTE

Use a platform or cabinet that is strong

y

and large enough to support the TV
securely.
Brackets, bolts and ropes are optional.

y

You can obtain additional accessories from
your local dealer.

Cable Management Clip

CAUTION

Do not move the TV by holding the cable

y

holder and cable management clip, as the
cable holders may break, and injuries and
damage to the TV may occur.

ASSEMBLING AND PREPARING

A

A

17

Mounting on a wall

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the
wall mount bracket on a solid wall perpendicular
to the floor. If you are attaching the TV to other
building materials, please contact qualified
personnel to install the wall mount. Detailed
instructions will be included with the wall mount.
We recommend that you use an LG brand wall
mount.

10 cm

10 cm

10 cm

10 cm

Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.

Model 60LA8600

60LA860T

VESA (A x B)

A

B

400 x 400

Standard screw M6
Number of screws 4
Wall mount bracket

LSW430B

(optional)

Model 70LA860T
VESA (A x B)

B

400 x 400

Standard screw M8
Number of screws 4
Wall mount bracket

LSW430BX

(optional)

Wall mount bracket (optional)

LSW430B
LSW430BX

MSW240

ENGLISH

Model 47LA8600

47LA860T
55LA960T

VESA (A x B)

B

400 x 400

Standard screw M6
Number of screws 4
Wall mount bracket

(optional)

MSW240
LSW430B